CONFERENCE PUBLICATIONS |
1. |
Irfan Anjum Manarvi, Kazim Raza, “Applying Safety Management Systems in Aviation Management Setup to Eradicate Human Errors”39th IEEE Aero conference Big Sky, Montana, USA March 3-10, 2018 |
2. |
Irfan Anjum Manarvi, Ishtiaq Hussain Butt, “Defect Trend Analysis of C-130 Environmental Control System by Data Mining of Maintenance History”, 39th IEEE Aero conference Big Sky, Montana, USA, March 3-10, 2018 |
3. |
Irfan Manarvi, Abdullah Alsaab, Muhannd Almehrj, “Design and Development of a Mug Using Electric Heating through Rechargeable Batteries”, 16th International Conference on Manufacturing Research ICMR, Sept 11-13, 2018, Sweden |
4. |
Irfan Manarvi, Abdulaziz Aldamash, Abdulrahman Alghamdi, “Design and Development of a Quantity Controlled Sugar Stick for Hot and Cold Drinks”, 16th International Conference on Manufacturing Research ICMR, Sept 11-13, 2018, Sweden |
5. |
Irfan Manarvi, Mahmoud Qusaibati, Hassan Muneel Syed, “Remote Control Systems for Lights; An Exploration of Available Technologies in the Market”, 16th International Conference on Manufacturing Research ICMR, Sept 11-13, 2018 Sweden |
6. |
Irfan Manarvi, Khalid Abalkhail, Bader Alhuthail, “Design and Development of a Miniature Cup Holder for Hot and Cold Drinks “On the Go”, 16th International Conference on Manufacturing Research ICMR, Sept 11-13, 2018 |
7. |
Asim Qayum, Irfan Manarvi, “Implementation of Lean Thinking in Higher Education Institutions (HEIS), International Technology, Education and Development Conference, March 2017, Valencia, Spain, DOI: 10.21125/inted.2017.0307 |
8. |
Irfan Manarvi, Haris Rehman, Evolving a University Industry Collaboration Framework and its implementation in Fire Protection Suit Development”, International Technology, Education and Development Conference, Valencia, Spain· March 2017, DOI: 10.21125/ inted.2017.2399 |
9. |
Wael Waleed Alzeer, Irfan Manarvi, Abdullah Bahmaid, “Design and Development of a Study Chair for Both Left and Right Handed People”, 2017 9th IEEE-GCC Conference and Exhibition (GCCCE),pp 1157-1160, Bahrain |
10. |
Anas Dawalibi, Asim Sabatto, Irfan Manarvi, “Design and Development of a Praying Chair for Disabled Persons affording convenience to others”, 2017 9th IEEE-GCC Conference and Exhibition (GCCCE),pp 1153-1156, Bahrain |
11. |
Mohammad Alzhrani, Abdulrahman Bin Talib, Irfan Manarvi, “Design and Development of a Hybrid Fire and Heat Detector through Narrowing of Alternatives”, 2017 9th IEEE-GCC Conference and Exhibition (GCCCE),pp 1147-1152, Bahrain |
12. |
Irfan Manarvi, “An investigation of animal and human bones for predicting probable location of fractures”, 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Year: 2016 Pages: 2194 – 2197, DOI:10.1109/EMBC. 2016.7591164 |
13. |
Irfan Manarvi, “Hardness Map of Human Meta Tarsals and Phalanges of Toes”, 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) Year: 2016, Pages: 5026 – 5029, DOI: 10.1109/EMBC.2016.7591856 |
14. |
Irfan Anjum Manarvi, Zahid Ali kaimkhani, “Hardness map of Human Tarsals, Meta Tarsals and Phalanges of Toes”, International Journal of Bioengineering and Life Sciences Vol:2, No:11, 2015, International Science Index, internationalscienceindex.org/abstracts/31852 |
15. |
Irfan Anjum Manarvi, Fawzi Aljassir, “Finite Element Analysis of Human Tarsals, Meta Tarsals and Phalanges for Predicting probable location of Fractures”, International Journal of Bioengineering and Life Sciences, International Science Index Vol:2, No:11, 2015 internationalscienceindex.org/abstracts/31853 |
16. |
Huma Fawad, Irfan Anjum Manarvi, “Student feedback & systematic evaluation of teaching and its correlation to learning theories, Pedagogy & Teaching skills”, International Conference on Teaching, Assessment and Learning (TALE), 2014 Pages: 398 – 404, DOI: 10.1109/TALE.2014.7062572 |
17. |
Manarvi, I.A. ; Shahid, I.A, “. Analyzing T-53 series engines defect trends through maintenance history” IEEE Aerospace Conference Bozeman, Montana USA, 2014 Page(s): 1 – 6, IEEE DOI: 10.1109/AERO.2014.6836391 |
18. |
Manarvi, I.A. ; Qazi, M.A., “ J69-T-25A engine component failure analysis”, IEEE Aerospace Conference Bozeman, Montana USA, 2014 Page(s): 1 – 6, IEEE DOI: 10.1109/AERO.2014.6836389 Year: 2014 |
19. |
Manarvi, Irfan Anjum, Aqib, Muhammad, Ajmal, Muhammad, Usman, Muhammad, Khurshid, Saqib, Sikandar, Usman, “Design and development of a quad copter (UMAASK) using CAD/CAM/CAE”, IEEE Aerospace Conference Bozeman, Montana USA, 2013 IEEE DOI: 10.1109/AERO.2013.6497379 , Year: 2013 |
20. |
Qadeer, A., Manarvi, I.A., “ Design and manufacturing of MIQA micro flying vehicle”, IEEE Aerospace Conference Bozeman, Montana USA, 2012, DOI: 10.1109/AERO.2012.6187316, Year: 2012 , Page(s): 1 – 8 |
21. |
Hassan, A. ; Manarvi, I.A., “Analysis of spectrometric data of aeroengines to establish hazard threshold limits for Iron content”, IEEE Aerospace Conference Bozeman, Montana USA, 2012 DOI: 10.1109/AERO.2012.6187361, Year: 2012 , Page(s): 1 – 7 |
22. |
Shahzad, K., Manarvi, I.A., “Defect trend analysis of T56 engine after overhaul”, IEEE Aerospace Conference Bozeman, Montana USA, 2012 DOI: 10.1109/AERO.2012.6187381, Year: 2012 , Page(s): 1 – 6 |
23. |
Bashir, T. ; Manarvi, I.A., “Defect trend analysis of Air Traffic Control Radars through maintenance history”, IEEE Aerospace Conference Bozeman, Montana USA, 2012 DOI:10.1109/ AERO.2012.6187380 Publication Year: 2012 , Page(s): 1 – 5 |
24. |
Siddiqui, M.H., Iqbal, Assad, Manarvi, I.A, “ Maintenance Resource Management: A key process initiative to reduce human factors in aviation maintenance”, IEEE Aerospace Conference Bozeman, Montana USA, 2012 DOI: 10.1109/AERO.2012.6187379 Publication Year: 2012 , Page(s): 1 – 7 |
25. |
Asif Rashid, Gokcen Yilmaz, Irfan Manarvi, Nawar Khan, “In Pursuit of Knowledge-Diffusion & Hyper-efficient Operations-Management: A Total Quality Management Perspective of Aviation Smart-Factory Computer integrated manufacturing (CIM)”, Czech Republic, Prague, IEEEA, WSEAS Conference Sep 2011 |
26. |
Kamran Ahmed Malik, Irfan Anjum Manarvi, “Implementation of CE in Software Development”, IS PE 18th Conference on Concurrent Engineering at MIT July 4-8, 2011 http://www.ce2011.org |
27. |
Amar Abbas, Irfan Anjum Manarvi, “CE Applications and Lessons Learnt in Oil Refinery”, IS PE 18th Conference on Concurrent Engineering at MIT July 4-8, 2011 http://www.ce2011.org |
28. |
Zahid Raza, Irfan Anjum Manarvi, “Analyzing Influence of Absence of CE in Pakistan” , IS PE 18th Conference on Concurrent Engineering at MIT July 4-8, 2011 http://www.ce2011.org |
29. |
Adeel Tariq, Irfan Manarvi, “Defect Trend Analysis of F-7P aircraft through Maintenance History”, IEEE Aerospace Conference Bozeman, Montana USA, March 2011-05-11, http://www.aeroconf.org/ |
30. |
Mahmud Yunus Khan, Irfan Manarvi, “Identification of Shortfalls in Procurement Management Process of Aviation Industry in Pakistan ”, IEEE Aerospace Conference Bozeman, Montana USA, March 2011-05-11, http://www.aeroconf.org/ |
31. |
Nasrullah Khan, Irfan Manarvi, “Identification of Delay Factors in C-130 Aircraft Overhaul and Finding Solutions through data Analysis”, IEEE Aerospace Conference Bozeman, Montana USA, March 2011-05-11, http://www.aeroconf.org/ |
32. |
Bilal Yunus, Irfan Manarvi, “Defect Trend Analysis of Airborne Fire Control Radar Using Maintenance History”, IEEE Aerospace Conference Bozeman, Montana USA, March 2011-05-11, http://www.aeroconf.org/ |
33. |
Irfan Manarvi, Waqar Muhammad, “Analysing defects of C-130 aircraft through datamining of aircraft history”, Published in IEEE Aerospace Conference Bozeman, Montana USA, March 2010-06-18, http://www.aeroconf.org/ |
34. |
Aamir Hanif, Irfan Anjum Manarvi, “ Investigating the Implementation of Balanced Scorecard in Pakistani Small Enterprises”, 2010 IEEE International Conference on Advanced Management Science IEEE ICAMS 2010, Chengdu, China, http://www.iacsit.org/iccrd/index.htm |
35. |
Raza, I.; Manarvi, I.; “Factors motivating educated women to adopt professional life”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1446 – 1451 |
36. |
Khawaja, K.F.; Manarvi, I.; “Evaluating customer perceptions towards ATM services in financial institutions; A case study of Pakistani Banks”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1440 – 1445 |
37. |
Hanif, A.; Manarvi, I.A.; Performance based segmentation of small and medium enterprises: A data mining approach Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1509 – 1513 |
38. |
Fahim-ul-Aqib, J.M.; Manarvi, I.; Ahmed, J.; Khan, K.; Zafar, S.; “A methodology of finding investment opportunities in South Asia through data mining and decision analysis”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1505 – 1508 |
39. |
Khan, R.K.; Manarvi, I.; Mohay-ud-din Evaluating performance of Blackcaps of New Zealand vs. global cricket teams, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1500 – 1504 |
40. |
Raza, H.; Manarvi, I.; Ahmed, J.; Khan, K.; urRehman, K, “A methodology of export sectors identification through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1496 – 1499 |
41. |
Mahmood, S.; Manarvi, I.; “Establishing the traits for best performing employee selection in telecom sector through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1490 – 1495 |
42. |
Ahmad, I.; Manarvi, I.; Ashraf, N.; “Predicting university performance in a subject based on high school majors”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1475 – 1479 |
43. |
Shahid, S.; Manarvi, I.; “ A methodology of predicting automotive sales trends through data mining”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1464 – 1469 |
44. |
Mirza, W.; Manarvi, I., “Laptop selection using data mining of critical features”, Computers& Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1485 – 1489 |
45. |
Khan, S.A.; Manarvi, I.; “Selecting a sports car through data mining of critical features” Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1480 – 1484 |
46. |
Zafar, S.; Manarvi, I.; Ahmed, J.; Khan, K.; ur Rehman, K.; “ Investment portfolio decisions for shares through data mining” Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1458 – 1463 |
47. |
Kazmi, S.N.A.; Manarvi, I.; “A methodology of identifying factors influencing foreign direct investment in ICT industry”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1452 – 1457 |
48. |
Rashid, M.; Manarvi, I.; “Vendor assessment and procurement decision making through data mining in aviation industry”, Computers & Industrial Engineering, 2009. CIE 2009. International Conference on 6-9 July 2009 Page(s):1470 – 1474 |
49. |
Manarvi, I.A.; Hameed, S., “Joint collaboration models for small satellite design and development between client and OEM”, Aerospace conference, 2009 IEEE 7-14 March 2009 Page(s):1 – 8 |
50. |
Hameed, M.S.; Manarvi, I.A.; “Using FEM and CFD to locate cracks in compressor blades for non destructive inspections”, Aerospace conference, 2009 IEEE 7-14 March 2009 Page(s):1 – 11 |
51. |
Aamir Hanif, Irfan Anjum Manarvi, “Influence of Quality, Innovation and New Product/Services Design on Small and Medium Enterprises”, World Congress on Engineering 2009 (WCE 2009)London, U.K., 1-3 July, 2009 |
52. |
Manarvi, M.A.; Ahmad, T.; “ A Methodology of Evolving User Requirements to Launch ERP in Aircraft Industry Environment”, Aerospace Conference, 2008 IEEE 1-8 March 2008 Page(s):1 – 21 |
53. |
Manarvi, I.A, Asif Rasheed:, “A Framework of Technology Diffusion in Aircraft manufacturing Industry Environment”, International Conference of Engineers and Computer Scientists 2008, , http://www.iaeng.org/IMECS2008, Hong Kong, 19-21 March, 2008 |
54. |
Manarvi, I.A, Neal Juster ,” A Uni-Axial test rig approach for deformation analysis of flexible parts due to location type tolerance in assembly”, EASED 2004 http://www.dmem.strath.ac.uk/EASED2004, Xi’An China, 19-21 April 2004 |
55. |
Manarvi, I.A, Neal Juster, “ Using FE simulations for flexible parts and assembly design in automotive industry” FISITA 2004 World Automotive Congress in http://www.fisita2004.com/, Barcelona Spain, June 2004 |
56. |
Manarvi, I.A, Neal Juster, “Integration of optical scanning system and FE simulations for automated tolerance synthesis in a concurrent engineering environment”, 11th International Society of Productivity Enhancement (ISPE) conference http://isg.uninova.pt/ce2003/, Madeira, Portugal, 26th to 31st July 2003 |
57. |
Manarvi, I.A , Raj Balendra, “Prediction of wrinkling in sheet metals using a modified Yoshida test and wrinkle height measurement through CMM”, 11th International Society of Productivity Enhancement (ISPE) conference http://isg.uninova.pt/ce2003 Madeira, Portugal, 26th to 31st July 2003 |
58. |
Manarvi, I.A, Neal Juster, “Combining FE and tolerance synthesis for aesthetic assembly design of flexible components” 1st International Conference on Manufacturing Research ICMR 2003 at University of Strathclyde http://dmem1.ds.strath.ac.uk/icmr2003/. Glasgow, Scotland United Kingdom, 9th to 11th September 2003 |
59. |
Manarvi, Neal P Juster, “ Using FE to simulate the effect of tolerance on part deformation” 10th International Society of Productivity Enhancement (ISPE) conference, Cranfield University United kingdom http://www.ceconf.com/ce2002/, 26th to 31st July 2002 |