Journal Publications  Year Impact Factor
2023
M. A. Chaudhary and M. M. Ahmed, “Pseudoelliptic waveguide filters using U-shaped ridge resonators,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 70, no. 2, pp. 371–375, 2023. 2023 4.4
S. Shafique, U. Munir, M. M. Ahmed, and K. S. Karimov, “Fabrication and characterization of orange dye, graphene and silicone adhesive composite based flexible humidity sensors,” Journal of Materials Science: Materials in Electronics, vol. 34, no. 7, p. 622, 2023. 2023 2.8
Q. U. Memon, U. Munir, U. F. Ahmed, and M. M. Ahmed, “An efficient technique to predict DC characteristics of nano-FinFETs using a deep neural network,” Journal of Computational Electronics, vol. 22, no. 1, pp. 230–241, 2023. 2023 2.1
M. U. Tahir, U. Rafique, M. M. Ahmed, S. M. Abbas, S. Iqbal, and S.-W. Wong, “High gain metasurface integrated millimeter-wave planar antenna,” International Journal of Microwave and Wireless Technologies, pp. 1–12, 2023. 2023 1.4
A. M. Khan, M. M. Ahmed, U. Rafique, and S. Khan, “Design, Analysis and Fabrication of an Inside-Grooved Slotted Waveguide Array Antenna for HPM Applications,” IEEE Access, vol. 11, pp. 50 116–50 129, 2023. 2023 3.476
A. M. Khan, M. M. Ahmed, and U. Rafique, “Experimental study of rf–plasma interaction using a low-pressure dc glow discharge tube for mpc,” Electronics, vol. 12, no. 3, p. 551, 2023. 2023 2.69
S. Kanwal and I. A. Taj, “CVit-Net: A conformer driven RGB-D salient object detector with operation-wise attention learning,” Expert Systems with Applications, p. 120075, 2023. 2023 8.665
A. B. Mehmood, I. A. Taj, and M. K. Ghafoor, “Minutiae Selection Algorithm (MSA) for Efficient Palmprint Matching,” Expert Systems with Applications, pp. 0957–4174, 2023. 2023 8.665
S. Batool, I. A. Taj, and M. Ghafoor, “Ejection Fraction Estimation from Echocardiograms Using Optimal Left Ventricle Feature Extraction Based on Clinical Methods,” Diagnostics, vol. 13, no. 13, p. 2155, 2023. 2023 3.992
A. B. Mehmood, I. A. Taj, and M. Ghafoor, “Palmprint enhancement network (PEN) for robust identification,” Multimedia Tools and Applications, pp. 1–28, 2023. 2023 2.577
A. Saeed, A. I. Bhatti, and F. M. Malik, “LMIs-Based LPV Control of Quadrotor with Time-Varying Payload,” Applied Sciences, vol. 13, no. 11, p. 6553, 2023. 2023 2.838
A. I. Bhatti, H. M. Y. Naeem, Y. A. Butt, and Q. Ahmed, “Energy Economization using Connectivity-based eco-Routing and Driving for Fleet of Battery Electric Vehicles,” IEEE Transactions on Transportation Electrification, 2023. 2023 6.519
A. Mahmood, F. ur Rehman, and A. I. Bhatti, “Range guidance for subsonic unpowered gliding vehicle using integral action-based sliding mode control,” International Journal of Dynamics and Control, pp. 1–11, 2023. 2023
A. I. Bhatti, H. M. Y. Naeem, Y. A. Butt, and Q. Ahmed, “Optimal control based eco-driving solution for connected battery electric vehicle on a signalized route,” Automotive Innovation, 2023. 2023
M. W. Zaffar and I. Hassan, “Hydraulic investigation of stilling basins of the barrage before and after remodeling using FLOW-3D,” Water Supply, 2023 2023 1.768
M. W. Zaffar, I. Hassan, U. Latif, S. Jahan, and Z. Ullah, “Numerical Investigation of Scour Downstream of Diversion Barrage for Different Stilling Basins at Flood Discharge,” Sustainability, vol. 15, no. 14, p. 11032, 2023. 2023 3.9
M. W. Zaffar and I. Hassan, “Numerical investigation of hydraulic jump for different stilling basins using FLOW-3D,” AQUA-Water Infrastructure, Ecosystems and Society, vol. 72, no. 7, pp. 1320–1343, 2023. 2023 1.9
Z. Zhang, Y. Li, C. Xinguo, Y. Wang, B. Niu, D. Li Liu, J. He, B. Pulatov, I. Hassan, and Q. Meng, “Impact of climate change and planting date shifts on growth and yields of double cropping rice in southeastern China in future,” Agricultural Systems, vol. 205, p. 103581, 2023. 2023 6.765
M. Naeem and U. A. Khan, “A PLL-Less Fourier Analysis Based Self-Synchronizer for Synchronverter having Uninterrupted Power Supply Capability,” e-Prime-Advances in Electrical Engineering, Electronics and Energy, vol. 5, p. 100257, 2023. 2023
W. A. Toor and M. Ashraf, “Performance Analysis of Learning-Based Disturbance Observer for Pulsed Superconducting Cavity Field Control,” Electronics, vol. 12, no. 7, p. 1556, 2023. 2023 2.69
A. U. Rehman and M. Ali, “An overview on use of waste plastic for soil stabilization,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 64– 67, 2023. 2023
M. U. Shahid and M. Ali, “An Overview of Construction Waste Management,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 121–126, 2023. 2023
S. Ahmed and M. Ali, “Mortarless Structures with Hollow Interlocking Blocks–A Review,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 96–100, 2023. 2023
M. Shah and M. Ali, “Fresh Properties of Concrete having Banana Leaf Ash and Banana Fibres,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 88–95, 2023. 2023
A. Khan and M. Ali, “Consideration of simple approaches for structural health monitoring of structures in developing countries-An overview,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 139–143, 2023. 2023
S. A. Janjua and M. Ali, “AA Review on Properties of Concrete Having Crumb Rubber as Partial Replacement of Fine Aggregates,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 42–48, 2023. 2023
T. Ahmad, N. Shaheen, and M. Ali, “A Review of Sustainability Indicators for Smallscale Construction Projects by Private Contractors,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 32–41, 2023. 2023
M. A. Javaid and M. Ali, “Influence of Waste PET Bottle Particles and Steel Fibers on Fresh Properties of Concrete,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 49–57, 2023. 2023
M. H. Zahoor, N. Shaheen, and M. Ali, “Identification of Critical Factors Leading to Cost Overrun in Building Projects Based on Literature Research,” 2023. 2023
K. Batool, B. Alshameri, F. Raza, A. Haider, and M. Ali, “Normalization of geotechnical sustainability assessment tool (Geo-SAT) using multiple criteria decision analysis for dams,” Environment, Development and Sustainability, pp. 1–35, 2023. 2023 4.08
K. Rashid, N. Fatima, E. Ul Haq, N. Shaheen, and M. Ju, “Feasibility assessment of microwave-cured lightweight aggregate concrete by mineral encapsulated self-healing,” Journal of Building Engineering, vol. 76, p. 107084, 2023. 2023 6.4
N. Shaheen, R. A. Khushnood, S. A. Memon, and F. Adnan, “Feasibility assessment of newly isolated calcifying bacterial strains in self-healing concrete,” Construction and Building Materials, vol. 362, p. 129662, 2023. 2023 7.693
A. Sultan, N. Shaheen, and R. A. Khushnood, “Experimental evaluation of bacterial self-healing concrete embodying Bacillus pumilus cured in normal and accelerated modes,” Materials and Structures, vol. 56, no. 2, pp. 1–17, 2023. 2023 4.285
L. Li, C. Yan, N. Zhang, M. U. Farooqi, S. Xu, and A. F. Deifalla, “Flexural fracture parameters of polypropylene fiber reinforced geopolymer,” Journal of Materials Research and Technology, vol. 24, pp. 1839–1855, 2023. 2023 6.267
Q. Chang, L. Liu, M. U. Farooqi, B. Thomas, and Y. O. Özkilicc, “Data-driven based estimation of waste-derived ceramic concrete from experimental results with its environmental assessment,” Journal of Materials Research and Technology, vol. 24, pp. 6348–6368, 2023. 2023 6.267
M. U. Farooqi and M. Ali, “A study on natural fibre reinforced concrete from materials to structural applications,” Arabian Journal for Science and Engineering, vol. 48, no. 4, pp. 4471–4491, 2023. 2023 2.807
X. Pan, B. Gencturk, M. Alnaggar, M. G. Sohail, R. Kahraman, N. Al Nuaimi, D. F. Rodrigues, and Y. Yildirim, “Numerical simulation of the fracture and compression response of self-healing concrete containing engineered aggregates,” Cement and Concrete Composites, vol. 136, p. 104858, 2023. 2023
Z. un Nisa, R. Hameed, M. Tahir, and M. G. Sohail, “Effect of Casting Technique on the Compressive Behaviour of Fully Recycled Aggregate Concrete,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 111–115, 2023. 2023
M. U. Farooq, R. Hameed, M. Tahir, M. G. Sohail, and S. Shahzad, “Mechanical and durability performance of 100% recycled aggregate concrete pavers made by compression casting,” Journal of Building Engineering, p. 106729, 2023. 2023 7.144
M. Ahmad, R. Hameed, S. Shahzad, and M. Ghous Sohail, “Performance evaluation of loadbearing compressed fully recycled aggregate concrete bricks,” Structures, vol. 55, pp. 1235–1249, 2023. 2023 4.1
S. S. S. Gardezi, S. H. H. Ali, R. Fayaz, and H. H. Shah, “Energy Performance Analysis of a Multi-Story Building Using Building Information Modeling (BIM),” Journal of Sustainability Perspectives, vol. 2, no. 1, pp. 16–23, 2023. 2023
J. Tariq and S. S. S. Gardezi, “Study the delays and conflicts for construction projects and their mutual relationship: A review,” Ain Shams Engineering Journal, vol. 14, no. 1, p. 101815, 2023. 2023 4.79
S. Ali and M. M. Khan, “Experimental Investigation of Battery Thermal Management System of Lithium-Ion Cells Using PCM,” Engineering Proceedings, vol. 45, no. 1, p. 52, 2023. 2023
S. Ullah, M. Irfan, and M. M. Khan, “Enhancing Energy Effciency: Geothermal Heat Pumps Utilizing Existing Water Boreholes in Pakistan,” Engineering Proceedings, vol. 45, no. 1, p. 6, 2023. 2023
M. M. Khan, “Experimental study of multi streams gasoline direct injection sprays under engine-like conditions,” 2023. 2023
L. A. Khan and M. M. Khan, “Influence of Angular Orientation of Fins on Thermal Charging and Discharging Performance of Latent Heat Storage Unit,” High Temp, vol. 60, p. 238–251, 2023. 2023 0.518
S. O. B. Islam, W. A. Lughmani, W. S. Qureshi, and A. Khalid, “A connective framework to minimize the anxiety of collaborative Cyber-Physical System,” International Journal of Computer Integrated Manufacturing, pp. 1–19, 2023. 2023 4.42
U. Asad, M. Khan, A. Khalid, and W. A. Lughmani, “Human-Centric Digital Twins in Industry: A Comprehensive Review of Enabling Technologies and Implementation Strategies,” Sensors, vol. 23, no. 8, p. 3938, 2023. 2023 3.847
N. Aslam, M. Haroon, S. Rasheed, F. U. Rai, and M. Iftikhar, “A Thermal Analysis of Atmospheric Balloons Using Different Coating Materials,” Engineering Proceedings, vol. 45, no. 1, p. 42, 2023. 2023
N. Aslam, M. Haroon, M. A. Munawar, S. Rasheed, and M. Masud, “Investigation of Progressive Delamination Growth Characterization in Composite Materials,” Engineering Proceedings, vol. 45, no. 1, p. 35, 2023. 2023
M. Mobeen, S. Jaweed, A. Abdullah, S. Rasheed, and M. Masud, “Parametric Optimization of Gravitational Water Vortex Turbines for Enhanced Torque Generation,” Engineering Proceedings, vol. 45, no. 1, p. 3, 2023. 2023
S. Rasheed, W. A. Lughmani, M. M. Khan, D. Brabazon, M. A. Obeidi, and I. U. Ahad, “The Porosity Design and Deformation Behavior Analysis of Additively Manufactured Bone Scaffolds through Finite Element Modelling and Mechanical Property Investigations,” Journal of Functional Biomaterials, vol. 14, no. 10, p. 496, 2023. 2023 4.8
U. Asad, S. Rasheed, W. A. Lughmani, T. Kazim, A. Khalid, and J. Pannek, “Biomechanical Modeling of Human-Robot Accident Scenarios: A Computational Assessment for Heavy-Payload-Capacity Robots,” Applied Sciences, vol. 13, no. 3, p. 1957, 2023. 2023 2.838
S. A. Kayani, S. S. Warsi, and R. A. Liaqait, “A Smart Decision Support Framework for Sustainable and Resilient Supplier Selection and Order Allocation in the Pharmaceutical Industry,” Sustainability, vol. 15, no. 7, p. 5962, 2023. 2023 3.889
M. Ahmed, A. Ayub, N. A. Sheikh, M. W. Shahzad, M. Haroon, and M. Imran, “Thermodynamic optimization and performance study of supercritical CO2 thermodynamic power cycles with dry cooling using response surface method,” International Communications in Heat and Mass Transfer, vol. 142, p. 106675, 2023. 2023 6.782
R. Siddiqui, M. A. Ali, W. Arshad, M. Shaban, M. Usman, and M. Zulfiqar, “Tribological Testing and Analysis of Surface-Textured Metal Surfaces,” Engineering Proceedings, vol. 45, no. 1, p. 4, 2023. 2023
M. R. Siddiqui, Y. Hamid, S. Khan, M. Zulfiqar, M. S. Khalil, and A. Qazi, “Experimental Investigation of Pulse Width Modulation-Based Electromagnetic Vibration Attenuation of a Ferromagnetic Flexible Cantilever Beam (FCB),” Journal of Vibration Engineering & Technologies, pp. 1–16, 2023. 2023 2.333
S. M. Abbas, H. Ali, S. A. A. Naqvi, M. Iqbal, H. H. Jabbar, M. Azeem, and M. Masud, “A Novel Low-Cost Machine for Evaluating Helmet Performance in Bike Accident Scenarios,” Engineering Proceedings, vol. 45, no. 1, p. 39, 2023. 2023
I. Hayat, A. Tariq, W. Shahzad, M. Masud, S. Ahmed, M. U. Ali, and A. Zafar, “Hybridization of Particle Swarm Optimization with Variable Neighborhood Search and Simulated Annealing for Improved Handling of the Permutation Flow-Shop Scheduling Problem,” Systems, vol. 11, no. 5, p. 221, 2023. 2023
S. Rasheed, M. Haroon, M. Irfan, Z. Ibrar, U. B. Ramzan, and D. Hanif, “A first step towards the performance enhancement of ic engines using a desmodromic valve system,” Engineering Proceedings, vol. 45, no. 1, p. 46, 2023. 2023
B. Hussain, H. W. Malik, F. U. Hasnain, and M. Irfan, “Phase change material for the cooling of solar panels—an experimental study,” Engineering Proceedings, vol. 45, no. 1, p. 43, 2023. 2023
Y. Zulfiqar, M. J. Hyder, A. Jehanzeb, H. W. Ahmad, A. Zulfiqar, U. M. Chaudry, and T.-S. Jun, “Numerical investigation of an optimum ring baffle design to optimize the structural strength of a tank subjected to resonant seismic sloshing,” Structural Engineering International, vol. 33, no. 2, pp. 350–360, 2023. 2023 1.1
M. J. Hyder, M. J. Khan, M. A. Khan, and S. Saeed, “The Design and Development of a Solar Dehydrator for Fruits,” Engineering Proceedings, vol. 45, no. 1, p. 48, 2023. 2023
A. Mubarak and M. J. Hyder, “Experimental and Computational Analysis of 14 Gauge Rooftop Solar PV Mounting Structure against Wind in Pakistan,” Engineering Proceedings, vol. 45, no. 1, p. 14, 2023. 2023
L. Zafar, N. Masood, and S. Ayaz, “Impact of field of study (FoS) on authors’ citation trend,” Scientometrics, pp. 1–20, 2023. 2023 3.801
E. Irshad and A. B. Siddiqui, “Cyber threat attribution using unstructured reports in cyber threat intelligence,” Egyptian Informatics Journal, vol. 24, no. 1, pp. 43–59, 2023. 2023 4.195
S. Ahmed, S. Irfan, N. Kiran, N. Masood, N. Anjum, and N. Ramzan, “Remote Health Monitoring Systems for Elderly People: A Survey,” Sensors, vol. 23, no. 16, p. 7095, 2023. 2023 3.9
R. M. Waqas Ahmed and N. Anjum, “Generic features selection for structure classification of diverse styled scholarly articles,” Multimedia Tools and Applications, pp. 1–33, 2023. 2023 3.6
S. Zaheer, N. Anjum, S. Hussain, A. D. Algarni, J. Iqbal, S. Bourouis, and S. S. Ullah, “A Multi Parameter Forecasting for Stock Time Series Data Using LSTM and Deep Learning Model,” Mathematics, vol. 11, no. 3, p. 590, 2023. 2023 2.4
A. Munir, S. Fazal, A. I. Bhatti, and B. Sajjad, “Pharmacokinetics- Pharmacodynamics Modeling and Evaluation of Tumor Response to Bortezomib Proteasome Inhibitor in Waldenstrom Macroglobulinemia,” American Journal of Clinical Oncology, vol. 46, no. 4, pp. 150–160, 2023. 2023 2.787
H. Ahsan, S. I. Malik, F. A. Shah, H. A. El-Serehy, A. Ullah, and Z. A. Shah, “Celecoxib Suppresses NF-κB p65 (RelA) and TNFα Expression Signaling in Glioblastoma,” Journal of Clinical Medicine, vol. 12, no. 20, p. 6683, 2023. 2023 3.9
H. Ahsan and S. I. Malik, “NGS-Mutational Analysis of Driver Genes and TGFB1 with Tumor suppressive and Oncogenic roles in Glioblastoma: An Integrated approach with Driver DBV3,” Journal of Tianjin University Science and Technology, vol. 56, no. 4, pp. 102–125, 2023. 2023
A. Liaqat, A. Alfatih, S. U. Jan, L. Sun, P. Zhao, and C. Xiang, “Transcription elongation factor atspt4-2 positively modulates salt tolerance in arabidopsis thaliana,” BMC Plant Biology, vol. 23, no. 1, p. 49, 2023. 2023 5.26
A. Alfatih, J. Zhang, Y. Song, S. U. Jan, Z.-S. Zhang, J.-Q. Xia, Z.-Y. Zhang, T. Nazish, J. Wu, P.-X. Zhao et al., “Nitrate-responsive OsMADS27 promotes salt tolerance in rice,” Plant Communications, vol. 4, no. 2, 2023. 2023 8.625
M. Ullah, M. Rizwan, A. Raza, X. Zhao, Y. Sun, S. Gul, M. I. Waheed, M. N. Khan, A. Gul, S. U. Jan et al., “Genome Characterization of Probiotic Lactobacillus delbrueckii Subsp. bulgaricus Strain NDO2 Isolated from Traditional Yogurt using High Throughput Next Generation Sequencing,” Pakistan Journal of Zoology, 2023. 2023 0.687
A. Fatima, F. Haider, J. M. A. Qaiser, S. U. Jan, and S. M. Bakhtiar, “Insilico analysis of peptides isolated from agaricus bisporus manifests potential antimicrobial therapeutic activities,” World Journal of Biology and Biotechnology, vol. 8, no. 1, pp. 25–29, 2023. 2023
S. u. Jan, M. Rehman, T. Nazish, S. A. Jan, A. Liaqat, M. Moustafa, A. Gul, N. u. Huda, S. M. Bakhtiyar, S. Gul et al., “Genome-wide study and expression analysis of nodule-inception-like Protein (NLP) Gene family in Physcomitrella Patens reveals its role in Nitrogen Response,” Pak. J. Bot, vol. 55, p. 1, 2023. 2023 1.101
A. Khan, F. Bibi, S. A. Jan, and Z. K. Shinwari, “Role of dof transcription factors under abiotic stresses,” Proceedings of the Pakistan Academy of Sciences: B. Life and Environmental Sciences, vol. 60, no. 3, 2023. 2023
M. Saleemi, M. Z. Kiani, T. Sultan, T. Tabassam, and S. A. Jan, “Combined effect of nitrogen fertilizer and plant growth promoting rhizobacteria on wheat (triticumaestivum l.),” Journal of Applied Sciences, vol. 23, no. 2, pp. 120–131, 2023. 2023
S. u. Jan, m. rehman, t. nazish, s. a. jan, a. liaqat, m. moustafa, a. gul, n. u. huda, s. m. bakhtiyar, s. gul et al., “Genome-wide study and expression analysis of noduleinception-like Protein (NIP) Gene family in physcomitrella patens reveals its role in nitrogen response,” Pak. J. Bot, vol. 55, no. 1, pp. 113–128, 2023. 2023 1.2
I. Khan, S. Khan, M. Akhoundian, D. Shah, S. S. Shah, and S. A. Jan, “Biogenesis of Non-coding RNAs (ncRNAs) and Their Biological Role in Rice (Oryza sativa L.),” Plant Molecular Biology Reporter, pp. 1–12, 2023. 2023 1.816
S. A. Jan, Z. K. Shinwari, N. Habib, S. Ali, M. S. Afridi, M. Khan et al., “Impact of Climate Change on Marine Biodiversity: Current Challenges and Future Perspectives: Marine Biodiversity, Climate Change and Complexity,” Proceedings of the Pakistan Academy of Sciences: B. Life and Environmental Sciences, vol. 60, no. 1, pp. 29–47, 2023. 2023
N. Habib, M. P. Narsing Rao, S. A. Jan, A. Banerjee, A. Thamchaipenet, and W.- J. Li, “Genome-based reclassification of Picrophilus torridus Zillig et al. 1996 as a later heterotypic synonym of Picrophilus oshimae Schleper et al. 1996,” International Journal of Systematic and Evolutionary Microbiology, vol. 73, no. 4, p. 005851, 2023. 2023 2.689
A. Fatima and S. Jan, “Approaches for sustainable production of soybean under current climate change condition,” MOJ Biol Med, vol. 8, no. 1, pp. 27–31, 2023. 2023
U. Ali and E. Dilshad, “Comparison of nigella sativa seeds extract and respective zno nps for antimicrobial, antioxidant and cytotoxic potential,” Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences, vol. 66, no. 1, pp. 63–73, 2023. 2023
H. Khan, B. Bibi, E. Dilshad, and R. Rani, “Identification of anticancer potential of phytoconstituents of cuminum cyminum effective against hepatocellular carcinoma using computational approaches,” Life and Science, vol. 4, p. 14, 2023. 2023
S. Mehmood, S. Aslam, E. Dilshad, H. Ismail, and A. Khan, “Transforming Diagnosis and Therapeutics Using Cancer Genomics,” Cancer treatment and research, vol. 185, pp. 15–47, 2023. 2023
H. Ismail, D. Khalid, S. B. Ayub, M. U. Ijaz, S. Akram, M. Z. Bhatti, M. M. Taqi, E. Dilshad, S. Anwaar, G. E.-S. Batiha et al., “Effects of Phoenix dactylifera against Streptozotocin-Aluminium Chloride Induced Alzheimer’s Rats and Their In Silico Study,” BioMed Research International, vol. 2023. 2023. 2023 3.246
H. Ashraf, E. Dilshad, T. Afsar, A. Almajwal, H. Shafique, and S. Razak, “Molecular Screening of Bioactive Compounds of Garlic for Therapeutic Effects against COVID- 19,” Biomedicines, vol. 11, no. 2, p. 643, 2023. 2023 4.757
A. N. Khan and E. Dilshad, “Enhanced Antioxidant and Anticancer Potential of Artemisia carvifolia Buch Transformed with rol A Gene,” Metabolites, vol. 13, no. 3, p. 351, 2023. 2023 5.581
R. Bushra, I. Ahmed, J.-L. Li, Z.-H. Lian, S. Li, A. Ali, B. Uzair, A. Amin, M. Ehsan, Y.-H. Liu, and W.-J. Li, “Untapped rich microbiota of mangroves of Pakistan: diversity and community compositions,” Folia Malacologica, 2023. 2023 2.6
M. Fatima, A. Amin, M. Alharbi, S. Ishtiaq, W. Sajjad, F. Ahmad, S. Ahmad, F. Hanif, M. Faheem, and A. A. K. Khalil, “Quorum Quenchers from Reynoutria japonica in the Battle against Methicillin-Resistant Staphylococcus aureus (MRSA),” Molecules, vol. 28, no. 6, p. 2635, 2023. 2023 4.927
M. U. Kakar, H. Karim, G. Shabir, I. Iqbal, M. Akram, S. Ahmad, M. Shafi, P. Gul, S. Riaz, R.-u. Rehman et al., “A review on extraction, composition, structure, and biological activities of polysaccharides from different parts of Nelumbo nucifera,” Food Science & Nutrition, 2023. 2023 3.553
A. Ahmed, G. Irshad, S. Riaz, and R. Badar, “Polarity based extracts of glycine max (l.) Seeds as Therapeutic source for Ovarian, Uterine and Hepato-renal profile of Sprague Dawley rats with letrozole-induced Polycystic Ovarian Syndrome,” Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, vol. 60, no. 4, 2023. 2023
A. Ahmed, F. N. Tahir, H. Kausar, S. Riaz, R. Badar, and A. Naz, “Therapeutic potential of Partially processed Camellia Sinensis (l.) Leaves to treat diabetic hepatorenal complications,” Journal of Xi’an Shiyou University, Natural Sciences Edition, vol. 66, no. 4, 2023. 2023
I. Riasat, N. I. Soomro, A. Noor, J. Iqbal, and S. M. Bakhtiar, “ACE GENE and its associations with Inflammation or Inflammatory Disorders ,International Journal of Biology and Biotechnology, vol. 19, no. 4, pp. 413–422, 2023. 2023
I. Zafar, H. Imran Afridi, S. Riaz, A. Unar, F. Un Nisa, A.-R. Gaafar, M. Bourhia, F. Wondmie Gezahign, R. Sharma, D. Kumar et al., “In silico and in vitro study of bioactive compounds of Nigella sativa for Targeting Neuropilins in Breast Cancer,” Frontiers in Chemistry, vol. 11, p. 1273149, 2023. 2023 5.5
M. U. Huq, S. A. Saeed, M. Z. Akhtar, R. U. Rehman, A. Aftab, and R. Afridi, “Clinical, Endoscopic and Pathological Characteristics of Colorectal Polyps in Children and Adolescents,” Pakistan Journal of Medical & Health Sciences, vol. 17, no. 02, pp. 405–405, 2023. 2023
M. U. Huq, R. U. Rehman, M. N. Mohsin, F. Usman, P. Jativa, and M. J. Heredia, “Role of Non-Hepatotropic Viruses in Acute Sporadic Viral Hepatitis and Acute-on Chronic Liver Failure in Adults,” Pakistan Journal of Medical & Health Sciences, vol. 17, no. 01, pp. 830–830, 2023. 2023
S. Hussain, S. M. Atif, M. Sagheer, and I. Jahangeer, “Analysis of magneto hydro- dynamic squeezed viscous fluid flow in a porous medium,” Journal of Central South University, vol. 30, no. 3, pp. 844–854, 2023. 2023 2.392
D.-e.-S. Sagheer, Z. Rahman, S. Batul, A. Aloqaily, and N. Mlaiki, “Existence of Fuzzy Fixed Points and Common Fuzzy Fixed Points for FG-Contractions with Applications,” Mathematics, vol. 11, no. 18, p. 3981, 2023. 2023 2.4
D.-e.-S. Sagheer, S. Batul, I. Urooj, H. Aydi, and S. Kumar, “New multivalued Fcontraction mappings involving α-admissibility with an application,” Journal of Inequalities and Applications, vol. 2023, no. 1, p. 109, 2023. 2023 1.6
D.-e.-S. Sagheer, I. Urooj, S. Batul, A. Aloqaily, and N. Mlaiki, “Well-Posedness Scheme for Coupled Fixed-Point Problems Using Generalized Contractions,” Axioms, vol. 12, no. 6, p. 523, 2023. 2023 1.824
A. Aloqaily, D.-e.-S. Sagheer, I. Urooj, S. Batul, and N. Mlaiki, “Solving Integral Equations via Hybrid Interpolative -Type Contractions in -Metric Spaces,” Symmetry, vol. 15, no. 2, p. 465, 2023. 2023 2.94
M. A. Memon, M. S. Khan, S. Saleem, S. Eldin, and K. Jacob, “Heat transfer through a higher grade Forchheimer porous CuO–H2O-nano-medium confined between nonisothermal moving plates,” Case Studies in Thermal Engineering, vol. 47, p. 103035, 2023. 2023 6.8
N. H. Hajano, M. S. Khan, L. Liu, M. A. Kaloi, and H. Mei, “Combined MicroStructural Effects of Linearly Increasing Reynolds Number and Mean Inflow Velocity on Flow Fields with Mesh Independence Analysis in Non-Classical Framework,” Mathematics, vol. 11, no. 9, p. 2074, 2023. 2023 2.4
M. Khan and I. Hameed, “FreeFEM++ based heat transfer analysis of an electrically induced magnetic flow within the framework of micropolar continuum,” Numerical Heat Transfer, Part A: Applications, pp. 1–19, 2023. 2023 2.569
M. S. Khan, M. A. Memon, I. Khan, and S. M. Eldin, “Finite element based direct and iterative approach to investigate a magneto-micropolar flow through a rectangular channel,” Alexandria Engineering Journal, vol. 75, pp. 55–66, 2023. 2023 6.626
M. S. Khan, I. Hameed, M. A. Memon, and E. Bonyah, “Computational analysis of magnetic induced micropolar flow in a rectangular channel through FreeFem++,” AIP Advances, vol. 13, no. 4, p. 045106, 2023. 2023 1.697
A. R. Kashif and M. Shoaib, “Restricted Concave Kite Five-Body Problem,” Advances in Astronomy, vol. 2023, p. 9434141, 2023. 2023 1.093
R. Ali, M. M. Hussain, S. Kanwal, F. Hajjej, and S. Inam, “A message recovery attack on multivariate polynomial trapdoor function,” PeerJ Computer Science, vol. 9, p. e1521, 2023 2023 3.8
R. Ali, F. Mehmood, A. Saghir, H. Aydi, S. Mansour, and W. Kallel, “Solution of integral equations for multivalued maps in fuzzy -metric spaces using Geraghty type contractions,” AIMs Mathematics, vol. 08, no. 07, pp. 16 633–16 654, 2023. 2023 2.739
A. Kamran, E. Azhar, N. Akmal, and Z. Mehmood, “Modeling and numerical handling of viscous dissipation in second order viscoelastic fluid flow in a nonparallel channel,” International Journal of Modern Physics B, p. 2450252, 2023. 2023 1.7
M. Afzal and H. Bilal, “Silencing performance analysis of a membrane cavity with different edge conditions,” Journal of Vibration and Control, vol. 29, no. 19-20, pp. 4466–4478, 2023. 2023 2.8
M. Afzal, N. Akhtar, M. O. Alkinidri, and M. Shutaywi, “A Mode-Matching TailoredGalerkin Approach for Higher Order Interface Conditions and Geometric Variations,” Mathematics, vol. 11, no. 3, p. 755, 2023,. 2023 2.4
M. Afzal, H. Bilal, N. Ahmed, and A. Wahab, “Acoustic scattering from a wave bearing cavity with flexible inlet and outlet,” Mathematical Methods in the Applied Sciences, 2023. 2023 2.9
A. Aloqaily, D.-e.-S. Sagheer, I. Urooj, S. Batul, and N. Mlaiki, “Solving Integral Equations via Hybrid Interpolative ffff-Type Contractions in ff-Metric Spaces,” Symmetry, vol. 15, no. 2, p. 465, 2023. 2023 2.7
Naz, A., Batul, S., Sagheer, D.E.S., Ayoob, I. and Mlaiki, N., 2023. F-Contractions Endowed with Mann’s Iterative Scheme in Convex G b-Metric Spaces. Axioms, vol. 12, no. 10, p .937, 2023. 2023 2.0
E. Azhar and A. Kamran, “Analysis of magneto-microstructural improvisation of Jeffery-Hamel flow of a viscoelastic fluid,” Journal of Central South University, vol. 30, no. 6, pp. 1763–1775, 2023. 2023 4.4
R. Andleeb and A. Hassan, “Impact of Investor Sentiment on Contemporaneous and Future Equity Returns in Emerging Markets,” SAGE Open, vol. 13, no. 3, p. 21582440231193568, 2023. 2023 2.032
W. Nasir, A. Hassan, and M. H. Khan, “Corporate social responsibility and firm performance nexus: Moderating role of CEO chair duality,” PLOS ONE, vol. 18, no. 8, pp. 1–10, 2023. 2023 3.752
R. Andleeb and A. Hassan, “Predictive effect of investor sentiment on current and future returns in emerging equity markets,” PLOS ONE, vol. 18, no. 5, pp. 1–15, 2023. 2023 3.7
N. Khan, A. Hassan, and A. I. Bhatti, “Quick Decision Making to Achieve the Competitive Edge: Significance Of Decimated Data For Forecasting The Stock Market,” Journal of Positive School Psychology, pp. 1341–1353, 2023. 2023 11.072
A. Tariq and A. Hassan, “Role of green finance, environmental regulations, and economic development in the transition towards a sustainable environment,” Journal of Cleaner Production, p. 137425, 2023. 2023 11.072
F. K. Butt and L. Muhammad, “Investigating the determinants of brand advocacy in the tourism sector, customer irrational beliefs as a moderator,” Journal of Positive School Psychology, vol. 7, no. 5, pp. 759–774, 2023. 2023
M. Mashkoor and L. Muhammad, “Ebullient supervision-meeting a tall order! exploring the role of ebullient supervision in developing happy, perspective-taking, thriving, and creative employees,” Journal of Positive School Psychology, vol. 7, no. 5, p. 742, 2023. 2023
M. Akram, A. I. Hunjra, I. R. Malik, and M. A. S. Al-Faryan, “Dynamic connectedness among Pakistani stock markets and its major trading partners,” International Journal of Emerging Markets, 2023. 2023 3.422
A. Shafique and N. T. Bhutta, “Mean and volatility spillover in Asian economies: Evidence from trade war,” PloS one, vol. 18, no. 11, p. e0292819, 2023. 2023 3.752
A. Dildar, N. T. Bhutta, and J. Kosar, “Dynamic Correlations Between Oil Prices And The Stock Prices Of Food Sector Firms: Evidence From Oil Exporting-Importing Countries,” Journal of Positive School Psychology, vol. 7, no. 5, pp. 269–280, 2023. 2023
F. W. Mir and N. T. Bhutta, “Impact of return and volatility spillover from banking industry to other industries: Evidence from Pakistan,” International Journal of Finance & Economics, 2023. 2023 1.6934
A. Batool and N. T. Bhutta, “Evaluation Of Momentum And Contrarian Strategies For Conventional And Shariah-Compliant Securities: Evidence From Pakistan Stock Exchange,” Journal of Positive School Psychology, pp. 105–129, 2023. 2023
A. Shafique and N. T. Bhutta, “Conceptual Framework: The impact of trade war on financial markets,” journal of Jilin University, vol. 42, no. 3, pp. 65–71, 2023. 2023
I. A. Janjua, M. Aksar, and S. Zafar, “Impact of compliance with International Financial reporting standards on value relevance,” Pakistan Journal of Social Research, vol. 5, no. 1, pp. 419–430, 2023. 2023
S. Hassan, M. A. Aksar, S. Khan, T. Ahmed, and M. Zahoor, “Impact of Audit Quality on Real Earnings Management: Moderating Role of Corporate Governance,” Reviews of Management Sciences, vol. 5, no. 1, pp. 1–12, 2023. 2023
D. Jan, A. Riaz, M. Yaseen, C. Ahmed, M. Hussain, J. Ahmed, and G. Riaz, “Integration Of Information Communication Technology In Pakistani Heis Through TAM Model,” Journal of Positive School Psychology, pp. 1202–1210, 2023. 2023
J. Ahmed, U. Farooq, A. A. Al-Naimi, M. I. Tabash, and K. Drachal, “Empirical Linkages between Branching, Lending, and Competition: A Study of Pakistani Banks,” Economies, vol. 11, no. 5, p. 145, 2023. 2023
N. Zahid and J. Ahmed, “Earnings Quality Index, Political Connections And Firm Performance,” Journal of Positive School Psychology, pp. 337–354, 2023. 2023
Y. Zhou, J. Dai, U. Farooq, J. Ahmed, and K. N. Sergeevna, “National Culture as a Determinant of Corporate Capital Structure: Empirical Evidence from Three Emerging Economies,” Advances in Decision Sciences, vol. 27, no. 2, pp. 122–144, 2023. 2023
B. H. Subhani, W. Wei, J. Ahmed, and U. Farooq, “Impact of Firm Reputation on Firm Financing Decision: Evidence from Non-Financial Sector of Pakistan,” Journal of Finance and Accounting Research, vol. 4, no. 2, pp. 53–74, 2023. 2023
N. Mubarak, A. Osmadi, J. Khan, A. Mahdiyar, and A. Riaz, “What Makes People Hide Knowledge,” Antecedents and consequences of knowledge hiding and organizations, vol. 16648714, 2023. 2023
N. Mubarak, J. Khan, S. Bashir, and S. Safdar, “Dark side of leadership and information technology project success: the role of mindfulness,” Journal of Managerial Psychology, 2023. 2023 4.09
N. Mubarak, J. Khan, and O. Pesämaa, “Lord of the Flies in Project-Based Organizations: The Role of Passive Leadership on Creativity and Project Success,” Project Management Journal, p. 87569728231157088, 2023. 2023 4.946
A. Khan, S. Naveed, F. Sheraz, and S. H. Awan, “Examining The Role Of Instructional Leaders And Their Effects On Teacher Performance And, Organization Citizenship Behavior In Educational Sector Of Pakistan: Teacher’s Self-Effcacy As A Mediating Factor,” Multicultural Education, vol. 9, no. 6, 2023. 2023
S. Syeda Nawazish Arooj, “Hatred as an affective outcome of relationship conflict: a moderated mediated study from the public sector of Pakistan,” Journal of Southwest Jiaotong University, vol. 58, no. 2, 2023. 2023
I. Ehsan, S. Safdar, S. Faiz, and H. Saghir, “Does Leadership Go Wrong? Investigating The Effect Of Abusive Leadership On Project Success? The Mediating Role Of Workplace Deviance,” Journal of Positive School Psychology, vol. 7, no. 5, pp. 1283–1295, 2023. 2023
S. Faiz, N. Mubarak, and S. Safdar, “Thinking out of the box’exploring the dual outcomes of gritty leadership in project-based organizations,” European Journal of Training and Development, 2023. 2023
A. M. Shah and M. Ali, “Social media marketing activities and luxury fashion brands in the post-pandemic world,” Asia Pacific Journal of Marketing and Logistics, 2023. 2023
W. Khuram, Y. Wang, M. Ali, A. Khalid, and H. Han, “Impact of Supportive Supervisor on Doctoral Students’ Research Productivity: The Mediating Roles of Academic Engagement and Academic Psychological Capital,” SAGE Open, vol. 13, no. 3, p. 21582440231185554, 2023. 2023
B. Naeem, M. Aqeel, A. Maqsood, I. Yousaf, and S. Ehsan, “Psychometric properties of the revised Urdu version dyadic adjustment scale for evaluating marital relationship quality between madrassa and Non-Madrassa married women,” International journal of human rights in healthcare, vol. 16, no. 1, pp. 34–53, 2023. 2023
A. Erum, U. R. Tulain, A. Maqsood, Sidra, N. S. Malik, A. Rashid, and L. Z. Warraich, “Fabrication and comparative appraisal of natural and synthetic polymeric pH responsive nanoparticles for effective delivery of dexlansoprazole,” Polymer Bulletin, vol. 80, no. 8, pp. 9113–9129, 2023. 2023 3.2
F. Laghari, S. Safdar, M. Jaafar, and A. Osmadi, “What makes leadership responsible and effective? Reinventing leadership in the COVID-19 outbreak,” Frontiers in Psychology, vol. 14, 2023. 2023
S. F. Badshah, M. U. Minhas, K. U. Khan, K. Barkat, O. Abdullah, A. Munir, M. Suhail, N. S. Malik, N. Jan, and H. Chopra, “Structural and in-vitro characterization of highly swellable β-cyclodextrin polymeric nanogels fabricated by free radical polymerization for solubility enhancement of rosuvastatin,” Particulate Science and Technology, pp. 1–15, 2023. 2023 2.628
M. Majid, A. Farhan, M. W. Baig, M. T. Khan, Y. Kamal, S. Bungau, I.-u. Haq et al., “Ameliorative Effect of Structurally Divergent Oleanane Triterpenoid, 3-Epifriedelinol from Ipomoea batatas against BPA-Induced Gonadotoxicity by Targeting PARP and NF-κB Signaling in Rats,” Molecules, vol. 28, no. 1, p. 290, 2023. 2023 4.927
M. T. Aqeel, N.-u. Rahman, A.-u. Khan, M. T. Khan, Z. Ashraf, S. S. ul Hassan, S. G. Bungau, and M. Majid, “Cardioprotective effect of 2-methoxy phenol derivatives against oxidative stress-induced vascular complications: An integrated in vitro, in silico, and in vivo investigation,” Biomedicine & Pharmacotherapy, vol. 165, p. 115240, 2023. 2023 7.5
A. Mahmood, A. Erum, U. R. Tulain, S. Shafiq, N. S. Malik, Sidra, M. T. Khan, and M. S. Alqahtani, “Aloe vera-Based Polymeric Network: A Promising Approach for Sustained Drug Delivery, Development, Characterization, and In Vitro Evaluation,” Gels, vol. 9, no. 6, p. 474, 2023. 2023 4.432
A. S. Sheikh, H. Nadeem, M. T. Khan, A. Saeed, and B. Murtaza, “Antibacterial potential of novel acetamide derivatives of 2-mercaptobenzothiazole: Synthesis and docking studies,” ACS omega, 2023. 2023 4.132
M. Zeeshan, Q. U. Ain, A. Sunny, F. Raza, M. Mohsin, S. Khan, B. Weigmann, and H. Ali, “Qbd-based fabrication of transferrin-anchored nanocarriers for targeted drug delivery to macrophages and colon cells for mucosal inflammation healing,” Biomaterials Science, vol. 11, no. 4, pp. 1373–1397, 2023. 2023 6.6
D. Mazhar, N. U. Haq, M. Zeeshan, Q. U. Ain, H. Ali, S. Khan, and S. A. Khan, “Preparation, characterization, and pharmacokinetic assessment of metformin HCl loaded transfersomes co-equipped with permeation enhancer to improve drug bioavailability via transdermal route,” Journal of Drug Delivery Science and Technology, vol. 84, p. 104448, 2023. 2023 5.0
S. Fathi-karkan, M. Zeeshan, M. Qindeel, R. E. Malekshah, A. Rahdar, and L. F. R. Ferreira, “NPs loaded with zoledronic acid as an advanced tool for cancer therapy,” Journal of Drug Delivery Science and Technology, p. 104805, 2023. 2023 5.0
M. Zeeshan, Q. U. Ain, B. Weigmann, D. Story, B. R. Smith, and H. Ali, “Dual pH and microbial-sensitive galactosylated polymeric nanocargoes for multi-level targeting to combat ulcerative colitis,” Asian Journal of Pharmaceutical Sciences, p. 100831, 2023. 2023 10.2
G. Mustafa, D. Hassan, M. Zeeshan, G. Ruiz-Pulido, N. Ebrahimi, A. Mobashar, M. Pourmadadi, A. Rahdar, S. Sargazi, S. Fathi-karkan et al., “Advances in nanotechnology versus stem cell therapy for the theranostics of Huntington’s disease,” Journal of Drug Delivery Science and Technology, p. 104774, 2023. 2023 5.0
M. N. H. Malik, M. N. Tahir, T. G. Alsahli, M. M. H. Tusher, S. I. Alzarea, B. Alsuwayt, S. Jahan, H. A. Gomaa, M. E. Shaker, M. Ali et al., “Geraniol suppresses oxidative stress, inflammation, and interstitial collagenase to protect against inflammatory arthritis,” ACS Omega, 2023. 4.1 2023 2023 4.1
I. Shah, W. Abbasi, M. Alhussein, I. Khan, F. Ur Rehman, M. S. Anwar, K. Aurangzeb et al., “Robust Approach for Global Stabilization of a Class of Underactuated Mechanical Systems in Presence of Uncertainties,” Complexity, vol. 2023, 2023. 2.12 2023 2023 2.12
N. Siddique, F. Rehman, U. Raoof, S. Iqbal, and M. Rashad, “Robust hybrid synchronization control of chaotic 3-cell CNN with uncertain parameters using smooth super twisting algorithm,” Bulletin of the Polish Academy of Sciences. Technical Sciences, vol. 71, no. 5, 2023. 1.51 2023 2023 1.51
F. ur Rehman and A. Mahmood, “Adaptive sliding mode-based full-state stabilization control of an underactuated hovercraft,” International Journal of Dynamics and Control, pp. 1–10, 2023. – 2023 2023
W. Abbass, R. Hussain, N. Abbas, S. A. Malik, M. A. Javed, M. Z. Khan, R. H. Alsisi, A. Noorwali, and P. Pattanaik, “Channel Allocation to GAA Users Using Double Deep Recurrent Q-Learning Based on Double Auction Method,” IEEE Access, 2023. 3.476 2023 2023 3.476
K. Ali, P. Saingam, M. I. Qureshi, S. Saleem, A. Nawaz, T. Mehmood, A. Maqsoom, M. W. Malik, and S. Suparp, “Influence of Recycled Plastic Incorporation as Coarse Aggregates on Concrete Properties,” Sustainability, vol. 15, no. 7, p. 5937, 2023. 3.889 2023 2023 3.889
M. W. Zaffar, I. Haasan, and A. R. Ghumman, “Performance Evaluation of Different Stilling Basins Downstream of Barrage Using FLOW-3D Scour Models,” Hydrology, vol. 10, no. 12, p. 223, 2023. – 2023 2023
M. W. Zaffar, I. Haasan, and A. R. Ghumman, “Numerical Investigation of Critical Hydraulic Parameters Using FLOW-3D: A Case Study of Taunsa Barrage, Pakistan,” Fluids, vol. 8, no. 12, p. 310, 2023. – 2023 2023
S. Ahmed and M. Ali, “Potential Applications of Different Forms of Recycled Plastics as Construction Materials—A Review,” Engineering Proceedings, vol. 53, no. 1, p. 5, 2023. – 2023 2023
A. Sikandar and M. Ali, “Composition of engineered cementitious composite with local materials, composite properties and its utilization for structures in developing countries,” Engineering Proceedings, vol. 53, no. 1, p. 16, 2023. – 2023 2023
Z. Khan and M. Ali, “Learning from past research for a green future: Harnessing organic and genetically enhanced trees to reduce construction-induced co2 emissions,” Engineering Proceedings, vol. 53, no. 1, p. 30, 2023. – 2023 2023
M. U. Shahid and M. Ali, “An insight into the enablers for waste management culture in the construction sector,” Engineering Proceedings, vol. 53, no. 1, p. 35, 2023. – 2023 2023
M. Zahoor and M. Ali, “Assessment of critical success factors for building projects through literature,” Engineering Proceedings, 2023. – 2023 2023
K. Douier, R. Hawileh, J. A. Abdalla, N. Al Nuaimi, and M. G. Sohail, “Durability performance of RC beams strengthened with CFRP laminates and galvanized steel mesh bonded with epoxy and mortar systems,” Structures, vol. 55, pp. 338–353, 2023. 4.1 2023 2023 4.1
H. Aslam, M. Zulfiqar, S. Ullah et al., “Prospects of low carbon development for pakistan’s energy and power sector in the post covid scenario.” International Journal of Renewable Energy Development, vol. 12, no. 4, 2023. – 2023 2023
M. Haroon and A. Ayub, “Role of the pakistan cement industry towards the achievement of net zero goal by mid-century: A review from a waste heat recovery perspective,” Engineering Proceedings, vol. 45, no. 1, p. 45, 2023. – 2023 2023
R. Ahmed, A. Basit, Q. u. D. Abid, M. Haroon, F. Kakar, N. Ullah, and D. A. Khan, “Techno-economic investigation of standalone photovoltaic energy systems for rural areas of quetta,” Engineering Proceedings, vol. 45, no. 1, p. 30, 2023. – 2023 2023
H. U. Rehman, H. Ullah, M. Zakarya, F. Kakar, Q. u. D. Abid, M. Haroon, M. A. Munawar, and M. A. Khan, “A techno-economic viability analysis of wind-powered power plants in panjgur, balochistan,” Engineering Proceedings, vol. 45, no. 1, p. 15, 2023. – 2023 2023
K. Usman, M. Kashif, M. Haroon, M. Ahmed, H. Ahmad, and A.-B. Shalaby, “Design of a chassis dynamometer facility for the european type-approval of passenger cars manufactured in pakistan,” Engineering Proceedings, vol. 45, no. 1, p. 16, 2023. – 2023 2023
U. Aftab, F. Jaleel, R. Mansoor, M. Haroon, and M. Aslam, “Obstructions in bim implementation for developing countries—a mini-review,” Engineering Proceedings, vol. 45, no. 1, p. 26, 2023. 2023
M. Waqas, N. Anjum, and M. T. Afzal, “A hybrid strategy to extract metadata from scholarly articles by utilizing support vector machine and heuristics,” Scientometrics, vol. 128, no. 8, pp. 4349–4382, 2023. 2023 3.9
A. Hayat, Y. N. Khalid, M. S. Rathore, and M. N. Nadir, “A machine learning-based resource-effcient task scheduler for heterogeneous computer systems,” The Journal of Supercomputing, pp. 1–29, 2023. 2023 2.557
A. Haseeb, M. A. Khan, F. Shehzad, M. Alhaisoni, J. A. Khan, T. Kim, and J.-H. Cha, “Knee Osteoarthritis Classification Using X-Ray Images Based on Optimal Deep Neural Network.” Computer Systems Science & Engineering, vol. 47, no. 2, 2023. 2023 4.397
M. Afraz, A. M. Fayyaz, and A. Haseeb, “A Unified Paradigm of Classifying GI Tract Diseases in Endoscopy Images Using Multiple Features Fusion,” Azerbaijan Journal of High Performance Computing, vol. 6, no. 1, pp. 49–76, 2023. 2023
B. Khan and A. Nadeem, “Evaluating the effectiveness of decomposed Halstead Metrics in software fault prediction,” PeerJ Computer Science, vol. 9, p. e1647, 2023. 2023 3.8
S. Javed, A. Sajid, T. Kiren, I. U. Khan, C. Dewi, F. Cauteruccio, and H. J. Christanto, “Subjective Logical Framework-Based Trust Model for Wormhole Attack Detection and Mitigation in Low-Power and Lossy (RPL) IoT-Networks,” Information, vol. 14, no. 9, p. 478, 2023. 2023
M. Irfan, N. Ayub, F. Althobiani, S. Masood, Q. Arbab Ahmed, M. H. Saeed, S. Rahman, H. Abdushkour, M. E. Gommosani, V. Shamji et al., “Ensemble learning approach for advanced metering infrastructure in future smart grids,” Plos one, vol. 18, no. 10, p. e0289672, 2023. 2023 3.752
C. A. U. Hassan, F. K. Karim, A. Abbas, J. Iqbal, H. Elmannai, S. Hussain, S. S. Ullah, and M. S. Khan, “A Cost-Effective Fall-Detection Framework for the Elderly Using Sensor-Based Technologies,” Sustainability, vol. 15, no. 5, p. 3982, 2023. 2023 3.889
N. Khan, S. Aqdas, R. Malik, S. Azam, A. Kanwal, Z. Shinwari, A. Shinwari, and S. Jan, “In-silico analysis of turmeric as an anti-inflammatory agent against ACE2 receptor,” Pakistan Journal of Botany, vol. 55, 2023. 2023 1.10
F. Nazir, S. Fazal et al., “Corvidae in Pakistan are Represented by Two Distinct Clades Revealed through Maternally Inherited Gene Region,” Pakistan Journal of Zoology, vol. 55, no. 4, p. 1509, 2023. 2023 0.687
R. Farooq, S. Bibi, R. M. Malik, F. Siraj, and S. Fazal, “Isolation and characterization of human health-concerned bacteria from the musca domestica in urban environments of districts rawalpindi and chakwal, pakistan,” Life and Science, 2023. 2023
S. Javed and E. Dilshad, “Artemisia carvifolia buch silver nanoparticles downregulate the rap2a gene in liver cancer,” Scientific Reports, vol. 13, p. 21553, 2023. 2023 4.99
H. Ismail, D. Khalid, D. Waseem, M. U. Ijaz, E. Dilshad, I.-u. Haq, M. Z. Bhatti, S. Anwaar, M. Ahmed, and S. Saleem, “Bioassays guided isolation of berberine from Berberis lycium and its neuroprotective role in aluminium chloride induced rat model of Alzheimer’s disease combined with insilico molecular docking,” Plos one, vol. 18, no. 11, p. e0286349, 2023. 2023 3.752
Z. Khurshid, N. M. Ashraf, and E. Dilshad, “Identification of Potential Antioxidant Compounds of Artemisia annua L. Using Computational Approaches,” Pakistan Journal of Scientific & Industrial Research Series A: Physical Sciences, vol. 66, no. 3, pp. 266–280, 2023. 2023
A. Liaqat, F. Maliha, and A. Amin, “Designed ORF Protein for Sustainable Third Generation Biofuel Production,” The Journal of Microbiology and Molecular Genetics, pp. 2788–8312, 2023. 2023
H. Anwar, R. Fatima, S. H. Khan, S. A. Raza, and A. Amin, “Analysis of Indigenous Bacterial Flora Found in Lead Contaminated Soil of Faisalabad and Harvesting its Ability for Bioremediation,” The Journal of Microbiology and Molecular Genetics, pp. 2788–8312, 2023. 2023
F. Hanif, A. Amin, and W. Sajjad, “Streptomyces species WM32 from desert soil as Biofactory for antioxidants with Radical Scavenging and Iron Chelating Potential,” Microorganisms, 2023. 2023
S. Riaz, A. Zahra, F. Haider, N. S. Malik, H. Shafique et al., “Comparative Effcacy of Anti-inflammatory potential of different agave species in Rat Model,” Journal of Population Therapeutics and Clinical Pharmacology, vol. 30, no. 18, pp. 549–567, 2023. 2023
F. Haider, S. Riaz, R. Shakeel, K. Hafeez, U. Z. Qureshi et al., “Investigation of Phytoestrogens Found in Sesame Seeds via Computational and Translational Approaches,” BioScientific Review, vol. 5, no. 4, pp. 53–68, 2023. 2023
G. Amjad, A. Masood, M. Zahid, A. Zahra, S. K. Ullah, S. Riaz et al., “Impact of agave extract on atherosclerosis in Rat Model: Assessing its Therapeutic Potential, elucidating its mechanisms, Implications for Cardiovascular health, and enhancing Treatment options,” Journal of Population Therapeutics and Clinical Pharmacology, vol. 30, no. 18, pp. 2930–2941, 2023. 2023
S. Hussain, S. M. Atif, M. Sagheer, and I. Jahangeer, “Analysis of magnetohydrodynamic squeezed viscous fluid flow in a porous medium,” Journal of Central South University, vol. 30, no. 3, pp. 844–854, 2023. 2023
M. Afzal, M. O. Alkinidri, M. Safdar, and H. Bilal, “On the scattering of cylindrical elastic shell having trifurcation and structural variations at interfaces,” Chaos, Solitons & Fractals, vol. 175, p. 114033, 2023. 2023
S. Batul, F. Mehmood, A. Hussain, R. George, and M. S. Ashraf, “Some results for multivalued mappings in extended fuzzy b-metric spaces,” AIMS Mathematics, vol. 8, no. 3, pp. 5338–5351, 2023. 2023
A. A. Jaffari, “Impact of business sustainability performance on cost of capital in emerging economies,” Ph.D. dissertation, 2023. 2023
M. Mashkoor and L. Muhammad, “Does ebullient supervision foster thriving, social and creative employees?–it all starts at the top,” European Journal of Training and Development, 2023. 2023
L. Muhammad and R. Habib, “Green Marketing Is Not a Choice but a Pre-Requisite for Z Generation: A Case of Green Campus Initiative in Capital University of Science & Technology, Pakistan,” in Sustainability and Social Marketing Issues in Asia. Emerald Publishing Limited, 2023, pp. 57–65. 2023
A. S. Ahmed, A. Qudus, A. Munawar, R. Karim, U. Liaqat, M. F. Tabassum et al., “The role of Cognitive-Behavioral Therapy in improving athletes’ Performance: A Systematic Review with adherence to Prisma guidelines,” Journal of Population Therapeutics and Clinical Pharmacology, vol. 30, no. 18, pp. 214–223, 2023. 2023
R. Imtiaz, S. Yousaf, and U. Rani, “Revolutionizing Psychology: The Transformative Influence Artificial Intelligence,” Science International, vol. 35, no. 4, pp. 503–506, 2023. 2023
H. Dar and U. Rani, “Review Article on Mindfulness, Self-Compassion, and Wellbeing: A Way of Exploring Interconnections and Implications,” Science International, vol. 35, no. 4, pp. 566–568, 2023. 2023
M. Khan, U. Mushtaq, R. Batool, S. Shaheen, A. Zafar Butt, and H. Hafeez, “Behind Bars and Beyond: Exploring the power of mental framing legal decision making for criminal behavior management,” Ponte Academic Journal, vol. 79, no. 7, 2023. 2023
S. Bibi and I. R. Malik, “Can stock market mispricing or the presence of stock price bubble be anticipated using fundamental analysis? An evidence from developing economies,” International Journal of Business and Management Sciences E ISSN, pp. 2708–4337, 2023. 2023
S. Hassan, M. Aksar, M. Zahoor, S. Hussain, and S. Khan, “An empirical investigation on ownership structure and earnings management: Evidence from psx and ftse-350 listed firms.” Journal of Organisational Studies & Innovation, vol. 10, no. 1, 2023. 2023
A. Javed, M. Aksar, A.-u. Haq, M. Naeem, and M. A. Sufyani, “Do corporate social responsibility and international financial reporting standards implementation matter?” Indonesian Journal of Sustainability Accounting and Management, vol. 7, no. 1, 2023. 2023
F. Sahar, A. Riaz, N. S. Malik, N. Gohar, A. Rasheed, U. R. Tulain, A. Erum, K. Barkat, S. F. Badshah, and S. I. Shah, “Design, characterization and evaluation of gelatin/carboxymethyl cellulose hydrogels for effective delivery of ciprofloxacin,” Polymer Bulletin, vol. 80, no. 11, pp. 12 271–12 299, 2023. 2023
M. T. Aqeel, N.-u. Rahman, A.-u. Khan, M. T. Khan, Z. Ashraf, S. S. ul Hassan, S. G. Bungau, and M. Majid, “Cardioprotective effect of 2-methoxy phenol derivatives against oxidative stress-induced vascular complications: An integrated in vitro, in silico, and in vivo investigation,” Biomedicine & Pharmacotherapy, vol. 165, p. 115240, 2023. 2023
Q. U. Ain, M. Zeeshan, D. Mazhar, A. Zeb, I. Afzal, H. Ullah, H. Ali, A. Rahdar, and A. M. Díez-Pascual, “QbD-based Fabrication of Biomimetic Hydroxyapatite Embedded Gelatin Nanoparticles for Localized Drug Delivery Against Deteriorated Arthritic Joint Architecture,” Macromolecular Bioscience, p. 2300336, 2023. 2023
M. Sarfraz, U. R. Tulain, A. Erum, N. S. Malik, A. Mahmood, S. Aslam, M. A. Sandhu, and M. Tayyab, “Cydonia oblonga-seed-mucilage-based ph-sensitive graft copolymer for controlled drug delivery—in vitro and in vivo evaluation,” Pharmaceutics, vol. 15, no. 10, p. 2445, 2023. 2023
A. Mahmood, A. Erum, U. R. Tulain, N. S. Malik, A. Saleem, M. S. Alqahtani, M. Z. Malik, M. Siddiqui, A. Safdar, and A. Malik, “Exploring the gelling properties of plantago ovata-based arabinoxylan: Fabrication and optimization of a topical emulgel using response surface methodology,” Plos One, 2023. 2023
J. Arshad, K. Barkat, M. U. Ashraf, S. F. Badshah, Z. Ahmad, I. Anjum, M. Shabbir, Y. Mehmood, I. Khalid, N. S. Malik et al., “Preparation and characterization of polymeric cross-linked hydrogel patch for topical delivery of gentamicin,” e-Polymers, vol. 23, no. 1, p. 20230045, 2023. 2023
S. Saeed, K. Barkat, M. U. Ashraf, M. Shabbir, I. Anjum, S. F. Badshah, M. Aamir, N. S. Malik, A. Tariq, and R. Ullah, “Flexible topical hydrogel patch loaded with antimicrobial drug for accelerated wound healing,” Gels, vol. 9, no. 7, p. 567, 2023. 2023
A. S. Sheikh, R. Altaf, H. Nadeem, M. T. Khan, and B. Murtaza, “Formation of morpholine-acetamide derivatives as potent anti-tumor drug candidates: Pharmacological evaluation and molecular docking studies,” Heliyon, 2023. 2023
S. Abid, H. M. U. Abid, M. Saleem, U. Khurshid, F. Afzal, M. Usman, M. Qayyum, A. Rafiq, B. A. Ghalloo, R. Dilshad et al., “Revolutionizing sericulture: Unleashing the potential of ascorbic acid for optimal silkworm well-being and maximized silk production,” Journal of Xian Shiyou University, 2023. 2023
A. Shafique and N. T. Bhutta, “Assessing conditional volatility due to trade war in the g-7 stock markets,” Social Sciences & Humanities Open, vol. 9, p. 100768, 2024. 2023
2022
Q. U. Memon, U. Munir, U. F. Ahmed, and M. M. Ahmed, “An efficient technique to predict DC characteristics of nano-FinFETs using a deep neural network,” Journal of Computational Electronics, pp. 1–12, 2022. 2022 1.983
A. M. Khan, M. M. Ahmed, U. Rafique, A. Kiyani, and S. M. Abbas, “An Efficient Slotted Waveguide Antenna System Integrated with Inside-Grooves and Modified Gaussian Slot Distribution,” Electronics, vol. 11, no. 18, p. 2948, 2022. 2022 2.69
M. A. Chaudhary and M. M. Ahmed, “Inline pseudoelliptic waveguide filters using asymmetric Iris coupled transverse rectangular ridge resonators,” International Journal of Microwave and Wireless Technologies, vol. 14, no. 5, pp. 537–545, 2022. 2022 1.09
M. A. Chaudhary and M. M. Ahmed, “Pseudoelliptic Waveguide Filters Using U- shaped Ridge Resonators,” IEEE Transactions on Circuits and Systems II: Express Briefs, 2022. 2022 3.292
U. Rafique, S. Khan, M. M. Ahmed, S. H. Kiani, S. M. Abbas, S. I. Saeed, M. Al- ibakhshikenari, and M. Dalarsson, “Uni-Planar MIMO Antenna for Sub-6 GHz 5G Mobile Phone Applications,” Applied Sciences, vol. 12, no. 8, p. 3746, 2022. 2022 2.679
M. U. Tahir, U. Rafique, and M. M. Ahmed, “Rhombus-Inscribed Circular Ring Fractal Array Antenna for Millimeter-Wave 5G Applications,” International Journal of Antennas and Propagation, vol. 2022. 2022. 2022 1.174
H. Khalil, U. Rafique, and M. M. Ahmed, “SIW-based dual-beam conical conformal slot array antenna for X-band applications,” Frequenz, vol. 76, no. 5-6, pp. 265–272, 2022. 2022 0.726
Q.-u.-d. Memon, U. F. Ahmed, and M. M. Ahmed, “A Schrödinger–Poisson model for output characteristics of trigate ballistic Si fin field effect transistors (FinFETs),” International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 35, no. 1, p. e2927, 2022. 2022 1.296
H. Raza, I. Ahmad, N. M. Khan, W. Abbasi, M. S. Anwar, S. Ahmad, and M. A. El-Affendi, “Validation of Parallel Distributed Adaptive Signal Processing (PDASP) Framework through Processing-Inefficient Low-Cost Platforms,” Mathematics, vol. 10, no. 23, p. 4600, 2022. 2022 2.592
R. F. Masood, I. A. Taj, M. B. Khan, M. A. Qureshi, and T. Hassan, “Deep Learning based Vertebral Body Segmentation with Extraction of Spinal Measurements and Disorder Disease Classification,” Biomedical Signal Processing and Control, vol. 71, p. 103230, 2022. 2022 3.88
Z. Latif, A. Shahzad, A. I. Bhatti, J. F. Whidborne, and R. Samar, “Autonomous Landing of an UAV Using H∞ Based Model Predictive Control,” Drones, vol. 6, no. 12, p. 416, 2022. 2022 5.532
R. Anjum, A. Yar, G. Murtaza, Q. Ahmed, and A. I. Bhatti, “Framework for fault- tolerant speed tracking control of gasoline engines using the first principle-based engine model,” Journal of Control and Decision, pp. 1–12, 2022. 2022
S. G. Bhatti and A. I. Bhatti, “Radar Signal Intrapulse Modulation Recognition using phase-based STFT and BiLSTM,” IEEE Access, vol. 10, pp. 80 184–80 194, 2022. 2022 3.476
H. M. Y. Naeem, A. I. Bhatti, Y. A. Butt, and Q. Ahmed, “Eco-driving control of electric vehicle with battery dynamic model and multiple traffic signals,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 236, no. 6, pp. 1133–1143, 2022. 2022 1.484
H. Muazzam, M. K. Ishak, A. Hanif, A. A. Uppal, A. Bhatti, and N. A. M. Isa, “Virtual Sensor Using a Super Twisting Algorithm Based Uniform Robust Exact Differentiator for Electric Vehicles,” Energies, vol. 15, no. 5, p. 1773, 2022. 2022 3.004
H. Muazzam, M. K. IshaK, A. Hanif, and A. I. Bhatti, “Compensating Thermal Derated Torque of IPMSM Centric Electric Vehicles,” IEEE Access, vol. 10, pp. 24 468–24 480, 2022. 2022 3.367
A. Hashmi, A. I. Bhatti, S. Ahmed, M. A. U. R. Tariq, and A. Savitsky, “Revisiting the Indus Basin Model for an Energy Sustainable Pakistan,” Water, vol. 14, no. 5, p. 702, 2022. 2022 3.103
S. Bano, M. R. Azam, A. A. Uppal, S. B. Javed, and A. I. Bhatti, “Robust p53 recovery using chattering free sliding mode control and a gain-scheduled modified Utkin observer,” Journal of theoretical biology, vol. 532, p. 110914, 2022. 2022 2.691
A. Mahmood, F. u. Rehman, and A. I. Bhatti, “Trajectory Optimization of a Subsonic Unpowered Gliding Vehicle Using Control Vector Parameterization,” Drones, vol. 6, no. 11, p. 360, 2022. 2022 5.432
M. R. Mufti, M. U. Farooq, J. Ali, N. Mehmood et al., “Synchronization and Anti synchronization of Identical 4D Hyperchaotic Financial System with External Perturbation via Sliding Mode Control Technique,” Complexity, vol. 2022. 2022. 2022 2.833
M. Naeem, M. Ashraf, and U. A. Khan, “A robust auto-synchronizer for synchronverter,” Computers & Electrical Engineering, vol. 98, p. 107661, 2022. 2022 3.818
M. H. Zafar, N. M. Khan, M. Mansoor, and U. A. Khan, “Towards green energy for sustainable development: Machine learning based MPPT approach for thermoelectric generator,” Journal of Cleaner Production, vol. 351, p. 131591, 2022. 2022 11.072
M. K. Khan, M. H. Zafar, M. Mansoor, A. F. Mirza, U. A. Khan, and N. M. Khan, “Green energy extraction for sustainable development: A novel MPPT technique for hybrid PV-TEG system,” Sustainable Energy Technologies and Assessments, vol. 53, p. 102388, 2022. 2022 7.632
M. Adnan, F. Khalid, and M. Ali, “Compressive Behavior of Interlocking Plastic Blocks Structural Elements Having Slenderness,” Buildings, vol. 12, no. 12, p. 2257, 2022. 2022 3.324
S. S. Khan and M. Ali, “Short-Term and Long-Term Needs for Sustainable Concrete— An Overview,” Engineering Proceedings, vol. 22, no. 1, p. 14, 2022. 2022
S. Ahmed and M. Ali, “Performance Evaluation of Jute-Fiber-Reinforced Concrete Walls with GFRP Reinforcement for Impact Energy Dissipation,” Engineering Proceedings, vol. 22, no. 1, p. 21, 2022. 2022
M. Khan, M. Cao, C. Xie, and M. Ali, “Effectiveness of hybrid steel-basalt fiber rein- forced concrete under compression,” Case Studies in Construction Materials, vol. 16, p. e00941, 2022. 2022 3.328
M. Khan, M. Cao, S. Chu, and M. Ali, “Properties of hybrid steel-basalt fiber rein- forced concrete exposed to different surrounding conditions,” Construction and Building Materials, vol. 322, p. 126340, 2022. 2022 6.141
M. Affan and M. Ali, “Experimental investigation on mechanical properties of jute fiber reinforced concrete under freeze-thaw conditions for pavement applications,” Construction and Building Materials, vol. 323, p. 126599, 2022. 2022 6.141
M. Khan, M. Cao, X. Chaopeng, and M. Ali, “Experimental and analytical study of hybrid fiber reinforced concrete prepared with basalt fiber under high temperature,” Fire and Materials, vol. 46, no. 1, pp. 205–226, 2022. 2022 2.407
A. Khan and M. Sudheer, “Machine learning-based monitoring and modeling for spatio-temporal urban growth of Islamabad,” The Egyptian Journal of Remote Sensing and Space Science, vol. 25, no. 2, pp. 541–550, 2022. 2022 5.188
M. U. Farooqi and M. Ali, “A study on Natural Fabre Reinforced Concrete from Materials to Structural Applications,” Arabian Journal for Science and Engineering, pp. 1–12, 2022. 2022 2.807
Q. Wang, A. Hussain, M. U. Farooqi, and A. F. Deifalla, “Artificial intelligence- based estimation of ultra-high-strength concrete’s flexural property,” Case Studies in Construction Materials, vol. 17, p. e01243, 2022. 2022 4.934
Z. Meng, L. Li, M. U. Farooqi, L. Feng, and L. Wang, “Fiber factor for fresh and hardened properties of polyethylene fiber-reinforced geopolymer mortar,” Journal of Building Engineering, vol. 53, p. 104556, 2022. 2022 7.144
L. Li, Y.-j. Wei, Z. Li, and M. U. Farooqi, “Rheological and viscoelastic characterizations of fly ash/slag/silica fume-based geopolymer,” Journal of Cleaner Production, vol. 354, p. 131629, 2022. 2022 11.072
M. Abdullah, N. Ali, M. A. Javid, and Q. Hussain, “Awareness and knowledge levels of engineering and planning students and practitioners about the 15-minute city concept in a developing country,” Journal of Urban Mobility, vol. 2, p. 100037, 2022. 2022
N. Ali, M. A. Javid, T. Campisi, K. Chaiyasarn, and P. Saingam, “Measuring Customers’ Satisfaction and Preferences for Ride-Hailing Services in a Developing Country,” Sustainability, vol. 14, no. 22, p. 15484, 2022. 2022 3.889
M. W. Malik and S. A. Rizwan, “Utilization of Acacia Modesta Gum Powder as Viscosity-Modifying Agent in Self-Compacting Paste Systems,” Engineering Proceedings, vol. 22, no. 1, p. 15, 2022. 2022
M. Khan, M. M. Khan, M. Irfan, N. Ahmad, M. A. Haq, I. Khan, and M. Mousa, “Energy performance enhancement of residential buildings in Pakistan by integrating phase change materials in building envelopes,” Energy Reports, vol. 8, pp. 9290–9307, 2022. 2022 4.937
L. Hussain and M. Khan, “Recent Progress in Flow Control and Heat Transfer Enhancement of Impinging Sweeping Jets Using Double Feedback Fluidic Oscillators: A Review,” Journal of Heat Transfer, vol. 144, no. 12, p. 120802, 2022. 2022 1.855
H. F. Ahmed, M. M. Khan, and F. K. Malik, “Influence of passive wake control on thermal-hydraulic performance of a cylinder confined in wavy channel under high blockage ratios,” Thermophysics and Aeromechanics, vol. 29, pp. 357–371, 2022. 2022 0.824
R. Sabir, M. M. Khan, M. Imran, N. A. Sheikh, and M. Irfan, “Role of transverse dimples in thermal-hydraulic performance of dimpled enhanced tubes,” International Communications in Heat and Mass Transfer, vol. 139, p. 106435, 2022. 2022 6.782
M. S. Shafiq and M. M. Khan, “Effects of fin length distribution functions and enclosure aspect ratio on latent thermal energy storage performance of dual-wall-heated unit,” Journal of Energy Storage, vol. 53, p. 105247, 2022. 2022 8.907
R. Sabir, M. M. Khan, and N. Sheikh, “Numerical investigation of thermal-hydraulic performance of u-tubes enhanced with ellipsoidal 45° dimples,” Journal of Heat Trans- fer, vol. 144, no. 8, 2022. 2022 2.021
F. Malik, M. Khan, H. Ahmed, M. Irfan, and I. U. Ahad, “Performance characteristics of PCM based thermal energy storage system for fluctuating waste heat sources,” Case Studies in Thermal Engineering, p. 102012, 2022. 2022 4.724
R. Qaiser, M. M. Khan, H. F. Ahmed, F. K. Malik, M. Irfan, and I. U. Ahad, “Performance enhancement of latent energy storage system using effective designs of tubes and shell,” Energy Reports, vol. 8, pp. 3856–3872, 2022. 2022 6.87
R. Sabir, M. M. Khan, N. A. Sheikh, and I. U. Ahad, “Effect of dimple pitch on thermal-hydraulic performance of tubes enhanced with ellipsoidal and teardrop dim- ples,” Case Studies in Thermal Engineering, vol. 31, p. 101835, 2022. 2022 6.87
S. O. B. Islam and W. A. Lughmani, “A Connective Framework for Social Collaborative Robotic System,” Machines, vol. 10, no. 11, p. 1086, 2022. 2022 2.899
A. Khalid, Y. Wei, M. R. Saleem, and W. A. Lughmani, “Meso scale component manufacturing: a comparative analysis of non-lithography and lithography-based processes,” Journal of Micromechanics and Microengineering, vol. 32, no. 6, p. 063002, 2022. 2022 1.881
L. Yue, G. Xu, J. Mumtaz, Y. Chen, and T. Zou, “Order Releasing and Scheduling for a Multi-Item MTO Industry: An Efficient Heuristic Based on Drum Buffer Rope,” Applied Sciences, vol. 12, no. 4, p. 1925, 2022. 2022 2.679
G. Patel, T. V. Sibalija, J. Mumtaz, Z. Li et al., “Abrasive water jet machining for a high-quality green composite: the soft computing strategy for modeling and optimization,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 44, no. 3, pp. 1–20, 2022. 2022 2.22
F. U. Hasnain, M. Irfan, and M. M. Khan, “Branching of fins and addition of Al2O3 nanoparticles for rapid charging and discharging of latent heat storage unit,” Inter- national Journal of energy Research, 2022. 2022 4.674
U. Zia, H. Aslam, and S. Qureshi, “Driving Parameters for Technology Penetration in Pakistan: A Case Study for Indoor LED Lighting,” Engineering Proceedings, vol. 23, no. 10, p. 10, 2022. 2022
U. Muhammad Niazi, S. Rahman, S. Legutko et al., “Experimental and Numerical Investigation of Effect of Static and Fatigue Loading on Behavior of Different Double Strap Adhesive Joint Configurations in Fiber Metal Laminates,” Materials, vol. 15, no. 5, p. 1840, 2022. 2022 3.748
M. Hassan, A. Mubashar, M. Masud, A. Zafar, M. Umair Ali, and Y. S. Rim, “Effect of Temperature and Al2O3 NanoFiller on the Stress Field of CFRP/Al Adhesively Bonded Single-Lap Joints,” Coatings, vol. 12, no. 12, p. 1865, 2022. 2022 3.236
M. Masud, M. D. Ali, M. Irfan, S. Rasheed, and M. Haroon, “Numerical Investigation of Impact and Compression after Impact Performance of 45° Biaxial Composite Laminates,” Engineering Proceedings, vol. 23, no. 1, p. 18, 2022. 2022
M. Haroon, S. Rasheed, M. Irfan, M. Masud, and M. A. Munawar, “Computational Investigation of the Flow Structure through an Over-Expanded Nozzle,” Engineering Proceedings, vol. 23, no. 1, p. 7, 2022. 2022
Y. Zulfiqar, M. J. Hyder, A. Jehanzeb, H. W. Ahmad, A. Zulfiqar, U. Ma- sood Chaudry, and T.-S. Jun, “Numerical Investigation of an Optimum Ring Baffle Design to Optimize the Structural Strength of a Tank Subjected to Resonant Seismic Sloshing,” Structural Engineering International, pp. 1–11, 2022. 2022 1.182
N. N. Malik, M. J. Hyder, and A. Shah, “Experiemental Investigation ON Techniques to Improve the accuracy of MPU 6050 for TILT Measurement,” Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, vol. 54, no. 9, pp. 158–174, 2022. 2022
M. J. Hyder, A. Nauman, and S. Musheer, “Monthly Average Solar Radiation and Angstrom-Prescott Model for Islamabad, Pakistan,” Engineering Proceedings, vol. 23, no. 1, p. 26, 2022. 2022
A. Muhammad and M. A. Qadir, “MF-Storm: a maximum flow-based job scheduler for stream processing engines on computational clusters to increase throughput,” PeerJ Computer Science, vol. 8, p. e1077, 2022. 2022 2.411
R. Mumtaz and M. A. Qadir, “CustRE: a rule-based system for family relations extraction from English text,” Knowledge and Information Systems, vol. 64, no. 7, pp. 1817–1844, 2022. 2022 2.531
R. Mumtaz, M. A. Qadir, and A. Saeed, “CustFRE: An annotated dataset for extraction of family relations from English text,” Data in brief, vol. 41, p. 107980, 2022. 2022
H. Waqas and A. Qadir, “Completing features for author name disambiguation (AND): an empirical analysis,” Scientometrics, vol. 127, no. 2, pp. 1039–1063, 2022. 2022 3.238
F. Jafari, A. Nadeem et al., “Evaluation of Metamorphic Testing for Edge Detection in MRI Brain Diagnostics,” Applied Sciences, vol. 12, no. 17, p. 8684, 2022. 2022 2.838
N. F. Malik, A. Nadeem, and M. A. Sindhu, “Achieving state space reduction in generated ajax web application state machine,” Intelligent Automation and Soft Computing, vol. 33, no. 1, pp. 429–455, 2022. 2022 1.647
M. Rizwan, A. Nadeem, S. Sarwar, M. Iqbal, M. Safyan, and Z. U. Qayyum, “Ekmex- an extended framework for labeling an unlabeled fault dataset,” Multimedia Tools and Applications, vol. 81, no. 9, pp. 12 141–12 156, 2022. 2022 2.757
T. Ashfaq, M. I. Khalid, G. Ali, M. E. Affendi, J. Iqbal, S. Hussain, S. S. Ullah, A. S. Yahaya, R. Khalid, and A. Mateen, “An Efficient and Secure Energy Trading Approach with Machine Learning Technique and Consortium Blockchain”, 2022. 2022
S. W. Khan, Q. Hafeez, M. I. Khalid, R. Alroobaea, S. Hussain, J. Iqbal, J. Almotiri, and S. S. Ullah, “Anomaly detection in traffic surveillance videos using deep learning,” Sensors, vol. 22, no. 17, p. 6563, 2022. 2022 3.847
I. Ehsan, A. Mumtaz, M. I. Khalid, J. Iqbal, S. Hussain, S. Sajid Ullah, and F. Umar, “Internet of Things-Based Fire Alarm Navigation System: A Fire-Rescue Department Perspective,” Mobile Information Systems, 2022. 2022 1.863
M. S. Khan, R. Irfan, J. Iqbal, S. Hussain, S. Sajid Ullah, R. Alroobaea, F. Umar et al., “Optimizing Deep Learning Model for Software Cost Estimation Using Hybrid Meta- Heuristic Algorithmic Approach,” Computational Intelligence and Neuroscience, vol. 2022. 2022. 2022 3.12
S. Bharany, S. Sharma, J. Frnda, M. Shuaib, M. I. Khalid, S. Hussain, J. Iqbal, and S. S. Ullah, “Wildfire Monitoring Based on Energy Efficient Clustering Approach for FANETS,” Drones, vol. 6, no. 8, p. 193, 2022. 2022 5.532
M. Shuaib, S. Badotra, M. I. Khalid, A. D. Algarni, S. S. Ullah, S. Bourouis, J. Iqbal, S. Bharany, and L. Gundaboina, “A Novel Optimization for GPU Mining Using Overclocking and Undervolting,” Sustainability, vol. 14, no. 14, p. 8708, 2022. 2022 3.889
S. S. Ullah, S. Hussain, M. Uddin, R. Alroobaea, J. Iqbal, A. M. Baqasah, M. Abdel- haq, and R. Alsaqour, “A Computationally Efficient Online/Offline Signature Scheme for Underwater Wireless Sensor Networks,” Sensors, vol. 22, no. 14, p. 5150, 2022. 2022 3.847
J. Iqbal, H. Bibi, N. U. Amin, H. AlSalman, S. Sajid Ullah, and S. Hussain, “Efficient and Secure Key Management and Authentication Scheme for WBSNs Using CP-ABE and Consortium Blockchain,” Journal of Sensors, vol. 2022. p. 2419992, 2022. 2022 2.336
M. Irfan Khalid, J. Iqbal, S. Hussain, N. Yaqub, and A. Naseem, “Implementation of Interference-Aware Susceptible Channel Assignment for Cognitive Radio Network,” 2022. 2022
M. Ayaz, J. Iqbal, M. Adnan, S. S. Hussain, A. Alabrah, N. U. Amin, S. Al-Hadhrami, M. Rahman, and S. Md, “A Content Dissemination Technique Based on Priority to Improve Quality of Service of Vehicular Ad Hoc Networks,” Journal of Advanced Transportation, vol. 2022. 2022. 2022 2.419
I. Ehsan, M. Irfan Khalid, L. Ricci, J. Iqbal, A. Alabrah, S. Sajid Ullah, and T. M. Alfakih, “A Conceptual Model for Blockchain-Based Agriculture Food Supply Chain System,” Scientific Programming, vol. 2022. 2022. 2022 1.025
M. I. Khalid, J. Iqbal, A. Alturki, S. Hussain, A. Alabrah, and S. S. Ullah, “Blockchain-Based Land Registration System: A Conceptual Framework,” Applied Bionics and Biomechanics, vol. 2022. 2022. 2022 1.781
S. Hussain, S. S. Ullah, M. Uddin, J. Iqbal, and C.-L. Chen, “A Comprehensive Survey on Signcryption Security Mechanisms in Wireless Body Area Networks,” Sensors, vol. 22, no. 3, p. 1072, 2022. 2022 3.847
J. Iqbal, M. Adnan, Y. Khan, H. AlSalman, S. Hussain, S. S. Ullah, N. U. Amin, and A. Gumaei, “Designing a Healthcare-Enabled Software-Defined Wireless Body Area Network Architecture for Secure Medical Data and Efficient Diagnosis,” Journal of Healthcare Engineering, vol. 2022. p. 9210761, 2022. 2022 2.682
C. A. U. Hassan, J. Iqbal, M. S. Khan, S. Hussain, A. Akhunzada, M. Ali, A. Gani, M. Uddin, and S. S. Ullah, “Design and Implementation of Real-Time Kitchen Moni- toring and Automation System Based on Internet of Things,” Energies, vol. 15, no. 18, p. 6778, 2022. 2022 3.252
N. Alturki, and S. S. Ullah, “Effectively Predicting the Presence of Coronary Heart Disease Using Machine Learning Classifiers,” Sensors, vol. 22, no. 19, p. 7227, 2022. 2022 3.847
C. A. U. Hassan, M. Hammad, M. Uddin, J. Iqbal, J. Sahi, S. Hussain, and S. S. Ullah, “Optimizing the Performance of Data Warehouse by Query Cache Mechanism,” IEEE Access, vol. 10, pp. 13 472–13 480, 2022. 2022 3.367
C. A. u. Hassan, J. Iqbal, N. Ayub, S. Hussain, R. Alroobaea, and S. S. Ullah, “Smart Grid Energy Optimization and Scheduling Appliances Priority for Residential Buildings through Meta-Heuristic Hybrid Approaches,” Energies, vol. 15, no. 5, p. 1752, 2022. 2022 3.004
C. Anwar ul Hassan, M. Hammad, J. Iqbal, S. Hussain, S. S. Ullah, H. AlSalman, M. A. Mosleh, and M. Arif, “A Liquid Democracy Enabled Blockchain-Based Electronic Voting System,” Scientific Programming, vol. 2022. 2022. 2022 1.025
A. Nawaz and M. Malik, “Rising stars prediction in reviewer network,” Electronic Commerce Research, vol. 22, no. 1, pp. 53–75, 2022. 2022 3.747
N. Ahmed, A. b. Ngadi, J. M. Sharif, S. Hussain, M. Uddin, M. S. Rathore, J. Iqbal, M. Abdelhaq, R. Alsaqour, S. S. Ullah et al., “Network Threat Detection Using Ma- chine/Deep Learning in SDN-Based Platforms: A Comprehensive Analysis of State-of- the-Art Solutions, Discussion, Challenges, and Future Research Direction,” Sensors, vol. 22, no. 20, p. 7896, 2022. 2022 3.847
M. S. Rathore, N. Ahmad, R. Kohli, J. Iqbal, R. Alroobaea, S. Hussain, S. S. Ul- lah, and F. Umar, “In the direction of service guarantees for virtualized network functions,” Wireless Communications and Mobile Computing, vol. 2022. 2022. 2022 2.336
A. B. Dogar, R. Fatima, A. Yasin, M. Shafiq, J. A. Khan, M. Assam, A. Mohamed, E.- A. Attia et al., “Stochastic Recognition of Human Physical Activities via Augmented Feature Descriptors and Random Forest Model, 2022” 2022
S. Fida, N. Masood, N. Tariq, and F. Qayyum, “A Novel Hybrid Ensemble Cluster- ing Technique for Student Performance Prediction,” Journal of Universal Computer Science, vol. 28, no. 8, pp. 777–798, 2022. 2022 1.056
S. Irfan, N. Anjum, T. Althobaiti, A. A. Alotaibi, A. B. Siddiqui, and N. Ramzan, “Heartbeat Classification and Arrhythmia Detection Using a Multi-Model Deep- Learning Technique,” Sensors, vol. 22, no. 15, p. 5606, 2022. 2022 3.847
A. Jabbar, Q. H. Abbasi, N. Anjum, T. Kalsoom, N. Ramzan, S. Ahmed, P. M. Rafi- ul Shan, O. P. Falade, M. A. Imran, and M. Ur Rehman, “Millimeter-Wave Smart Antenna Solutions for URLLC in Industry 4.0 and Beyond,” Sensors, vol. 22, no. 7, p. 2688, 2022. 2022 3.847
M. A. Jamshed, C. Theodorou, T. Kalsoom, N. Anjum, Q. H. Abbasi, and M. Ur- Rehman, “Intelligent computing-based forecasting of deforestation using fire alerts: A deep learning approach,” Physical Communication, vol. 55, p. 101941, 2022. 2022 2.379
Z. Mehmood, H. N. Chaudhry, R. A. Naqvi, F. Kulsoom, A. Munshi, and M. Bilal, “Passive Framework of Sparse Region Duplication Detection from Digital Images,” Journal of Sensors, vol. 2022. 2022. 2022 2.336
D. Hamid, S. Sajid Ullah, J. Iqbal, S. Hussain, C. Hassan, A. Ul, and F. Umar, “A Machine Learning in Binary and Multiclassification Results on Imbalanced Heart Disease Data Stream,” Journal of Sensors, 2022. 2022 2.336
S. Haider, A. Mahmood, S. Khatoon, M. Alshamari, and M. T. Afzal, “Automatic Classification of Eyewitness Messages for Disaster Events Using Linguistic Rules and ML/AI Approaches,” Applied Sciences, vol. 12, no. 19, p. 9953, 2022. 2022 2.838
F. S. Ujager, A. Mahmood, M. Usman, and M. S. Rathore, “A Hierarchical Energy Conservation Framework (HECF) of Wireless Sensor Networks by Temporal Association Rule Mining for Smart Buildings,” Egyptian Informatics Journal, vol. 23, no. 1, pp. 137–147, 2022. 2022 4.195
S. Inam, A. Mahmood, S. Khatoon, M. Alshamari, and N. Nawaz, “Multisource data integration and comparative analysis of machine learning models for on-street parking prediction,” Sustainability, vol. 14, no. 12, p. 7317, 2022. 2022 3.889
A. Sajid, M. S. Saeed, R. M. Malik, S. Fazal, S. Malik, and M. A. Kamal, “Prediction of Secondary and Tertiary Structure and Docking of Rb1WT And Rb1R661W Proteins,” Current Biotechnology, vol. 11, no. 1, pp. 71–85, 2022. 2022
S. Hussain and S. I. Malik, “Proliferative Effects of Lung Cancer Cells Derived Exosomes on T Cells,” Brazilian Archives of Biology and Technology, vol. 65, 2022. 2022 1.18
S. Hussain and S. Malik, “Effects of tumor derived exosomes on T cells markers expression,” Brazilian Journal of Biology, vol. 84, 2022. 2022 1.651
A. Iqbal, “Structural Diversity and Forest Tree Species Composition of Sheringal Valley Dir Kohistan Pakistan,” Fresenius Environmental Bulletin, vol. 31, no. 10, pp. 10 128–10 135, 2022. 2022 0.618
S. A. Jan, R. Tabassum, and H. Bashir, “Speed breeding methods for soybean improvement: recent advances,” J Nutr Health Food Eng, vol. 12, no. 2, pp. 41–42, 2022. 2022
M. Khan, S. H. Shah, M. Abdullah, M. Salman, F. Hayat, R. Sarwar, N. Hassan, S. A. Jan, M. Saddam, Z. Rahman et al., “Current Epidemiological Status and Antibiotic Resistance Profile of Urinary Tract Infection,” Journal of Bioresource Management, vol. 9, no. 1, p. 12, 2022. 2022
S. A. Jan, Z. K. Shinwari, M. Faizan, and S. Ijaz, “Anticancer properties of soybean: an updated review,” J Cancer Prev Curr Res, vol. 13, no. 1, pp. 22–23, 2022. 2022
S. Jan, Z. Shinwari, I. Khan, S. Khan, A. Iqbal, and H. Khurshid, “CRISPR-CAS9 Mediated Genome Editing In Plants against Viruses: An Updated Review,” Pak. J. Bot, vol. 54, no. 4, pp. 1575–1578, 2022. 2022 0.972
I. Riasat, N. I. Soomro, A. Noor, J. Iqbal, and S. M. Bakhtiar, “Ace Gene and its Associations with Inflammation or Inflammatory Disorders,” International Journal of Biology and Biotechnology, vol. 19, no. 4, pp. 413–422, 2022. 2022
S. Imtiaz, N. I. Soomro, I. Riasat, S. Hafeez, J. Iqbal, and S. M. Bakhtiar, “Association of BDNF Gene (rs6265/G196A) Polymorphism with Depression,” NUST Journal of Natural Sciences, vol. 6, no. 2, 2022. 2022
E. Dilshad, M. Idrees, B. Sajid, A. Munir, and S. Fazal, “Non-Toxic Flavonoids of Artemisia annua can be used as Anti-Cancer Compounds: A Computational Analysis,” Life and Science, vol. 3, no. 4, pp. 12–12, 2022. 2022
E. Dilshad, M. Maaz, N. M. Ashraf et al., “Identification of Anti-inflammatory Metabolites from Trigonella foenum greacum using Computational Approaches,” Cur- rent Trends in OMICS, vol. 2, no. 1, pp. 55–88, 2022. 2022
S. Safi, Y. Badshah, M. Shabbir, K. Zahra, K. Khan, E. Dilshad, T. Afsar, A. Al- majwal, N. W. Alruwaili, D. Al-Disi et al., “Predicting 3d structure, cross talks, and prognostic significance of klf9 in cervical cancer,” Frontiers in Oncology, vol. 11, pp. 797 007–797 007, 2022. 2022 6.244
E. Dilshad, F. Mehmood, R. Tariq, A. Munir, and S. Fazal, “Chemical constituents of artemisia annua are potent inhibitors of alpha-amylase in type ii diabetes,” Life and Science, vol. 3, no. 1, pp. 10–10, 2022. 2022
I. U. Khan, M. Saqib, A. Amin, F. Hussain, L. Li, Y.-H. Liu, B.-Z. Fang, I. Ahmed, and W.-J. Li, “Noviherbaspirillum aridicola sp. nov., isolated from an arid soil in pakistan,” International Journal of Systematic and Evolutionary Microbiology, vol. 72, no. 2, p. 005232, 2022. 2022 2.747
S. Riaz, I. Ejaz, R.-u.-R. , B. Aftab, M. Zahid, and Z. Andleeb, “The Effect of Bougainvillea spectabilis Leaf Extract on Polycystic Ovary Syndrome (PCOS) in Rat Model,” Journal of Food and Nutrition Research, vol. 10, no. 11, pp. 762–771, 2022. 2022 1.138
S. Riaz, M. Zahid, R. Rehman, B. Aftab, M. Imran, and S. Ijlal Shahrukh, “Effect of Phytoestrogens in the Treatment of Polycystic Ovary Syndrome in Rat Model,” Journal of Food and Nutrition Research, vol. 10, no. 7, pp. 518–525, 2022. 2022 1.138
M. Ullah, M. Rizwan, A. Raza, X. Zhao, Y. Sun, S. Gul, M. I. Waheed, M. N. Khan, A. Gul, S. U. Jan et al., “Comparative Genomic and Functional Characterization of Lactobacillus casei Group (LCG) Probiotic Strains Isolated from Traditional Yogurts by Next-Generation Sequencing,” Pakistan Journal of Zoloogy, pp. 1–10, 2022. 2022 0.687
A. Alfatih, J. Zhang, Y. Song, S. U. Jan, Z.-S. Zhang, J.-Q. Xia, Z.-Y. Zhang, T. Nazish, J. Wu, P.-X. Zhao et al., “Nitrate-responsive OsMADS27 promotes salt tolerance in rice,” Plant Communications, p. 100458, 2022. 2022 8.625
M. U. R. Kayani, K. Yu, Y. Qiu, X. Yu, L. Chen, and L. Huang, “Longitudinal analysis of exposure to a low concentration of oxytetracycline on the zebrafish gut microbiome.” Frontiers in microbiology, vol. 13, pp. 985 065–985 065, 2022. 2022 6.064
L. Huang, “Genome-Resolved Characterization of Structure and Potential Functions of the Zebrafish Stool Microbiome,” Frontiers in Cellular and Infection Microbiology, vol. 12, p. 910766, 2022. 2022 6.073
M. Sagheer, S. Atif, S. Hussain, and H. Rehman, “Squeezed MHD tangent hyperbolic fluid flow across a sensor surface,” Heat Transfer, vol. 51, no. 6, pp. 5101–5113, 2022. 2022
S. Hussain, M. Jamal, Z. Haddad, and M. Arici, “Numerical modeling of magnetohy- drodynamic thermosolutal free convection of power law fluids in a staggered porous enclosure,” Sustainable Energy Technologies and Assessments, vol. 53, p. 102395, 2022. 2022 7.632
S. Hussain, M. Molana, T. Armaghani, A. Rashad, and H. A. Nabwey, “Energy storage performance and irreversibility analysis of a water-based suspension containing nano- encapsulated phase change materials in a porous staggered cavity,” Journal of Energy Storage, vol. 53, p. 104975, 2022. 2022 8.907
S. Hussain, M. Zeeshan et al., “Irreversibility analysis for the natural convection of Casson fluid in an inclined porous cavity under the effects of magnetic field and viscous dissipation,” International Journal of Thermal Sciences, vol. 179, p. 107699, 2022. 2022 4.779
L. Kolsi, S. Hussain, K. Ghachem, M. Jamal, and C. Maatki, “Double Diffusive Natural Convection in a Square Cavity Filled with a Porous Media and a Power Law Fluid Separated by a Wavy Interface,” Mathematics, vol. 10, no. 7, p. 1060, 2022. 2022 2.258
S. Hussain, M. Pour, M. Jamal, and T. Armaghani, “MHD Mixed Convection and Entropy Analysis of Non-Newtonian Hybrid Nanofluid in a Novel Wavy Elbow-Shaped Cavity with a Quarter Circle Hot Block and a Rotating Cylinder,” Experimental Techniques, pp. 1–20, 2022. 2022 1.167
S. Hussain, A. M. Aly, and H. F. Öztop, “Magneto-bioconvection flow of hybrid nanofluid in the presence of oxytactic bacteria in a lid-driven cavity with a streamlined obstacle,” International Communications in Heat and Mass Transfer, vol. 134, p. 106029, 2022. 2022 5.683
S. Hussain and B. P. Geridonmez, “Mixed bioconvection flow of Ag-MgO/water in the presence of oxytactic bacteria and inclined periodic magnetic field,” International Communications in Heat and Mass Transfer, vol. 134, p. 106015, 2022. 2022 5.683
S. Hussain, T. Tayebi, T. Armaghani, A. Rashad, and H. Nabwey, “Conjugate natural convection of non-Newtonian hybrid nanofluid in wavy-shaped enclosure,” Applied Mathematics and Mechanics, vol. 43, no. 3, pp. 447–466, 2022. 2022 2.866
S. Hussain, N. Alsedias, and A. M. Aly, “Natural convection of a water-based suspension containing nano-encapsulated phase change material in a porous grooved cavity,” Journal of Energy Storage, vol. 51, p. 104589, 2022. 2022 6.583
M. Afzal and H. Bilal, “Silencing performance analysis of a membrane cavity with different edge conditions,” Journal of Vibration and Control, p. 10775463221118707, 2022. 2022 2.633
H. Bilal and M. Afzal, “Reflection and transmission of acoustic waves through the bridging membrane junctions,” Waves in Random and Complex Media, pp. 1–24, 2022. 2022 4.853
M. Afzal, J. U. Satti, A. Wahab, and R. Nawaz, “Scattering analysis of a partitioned membrane-bounded cavity with material contrast,” The Journal of the Acoustical Society of America, vol. 151, no. 1, pp. 31–44, 2022. 2022 1.84
S. Kanwal, S. Inam, R. Ali, and O. Cheikhrouhou, “Lightweight Noncommutative Key Exchange Protocol for IoT Environments,” Frontiers in Environmental Science, p. 1775, 2022. 2022 5.411
T. S. Ali and R. Ali, “A novel color image encryption scheme based on a new dynamic compound chaotic map and S-box,” Multimedia Tools and Applications, pp. 1–15, 2022. 2022 2.757
M. Zia and R. Ali, “Cryptanalysis of an Encryption Scheme that Uses Elliptic Curve Over Finite Field,” Kuwait Journal of Science, vol. 49, no. 1, pp. 1–11, 2022. 2022 0.948
S. Batul, F. Mehmood, A. Hussain, R. George, and M. Sohail, “Some results for multivalued mappings in extended fuzzy b-metric spaces,” AIMS Mathematics, vol. 8, no. 3, pp. 5338–5351, 2022. 2022 2.739
S. Batul, D.-S. Sagheer, M. Anwar, H. Aydi, and V. Parvane, “Fuzzy Fixed-Point Results of Fuzzy Mappings on b-Metric Spaces via (a, F)-Contractions,” Advances in Mathematical Physics, vol. 2022. pp. 1–8, 2022. 2022 1.364
S. Batul, F. Mehmood, D.-S. Sagheer, M. S. Ashraf, H. Aydi, and Y. Gaba, “On Geraghty Contractive Mappings and an Application,” Journal of Mathematics, vol. 2022., 2022. 2022 1.55
S. Batul, H. A. Dur-e Shehwar Sagheer, A. Mukheimer, and S. S. Aiadi, “Best proximity point results for Prevsic type non self-operators in b-metric spaces,” AIMS Mathematics, vol. 7, no. 6, pp. 10 711–10 730, 2022. 2022 1.427
S. Batul, F. Mehmood, A. Hussain, D.-e.-S. Sagheer, H. Aydi, and A. Mukheimer, “Multivalued contraction maps on fuzzy b-metric spaces and an application,” AIMS Mathematics, vol. 7, no. 4, pp. 5925–5942, 2022. 2022 1.427
E. Azhar, A. Kamran, and S. Atif, “Exploring the dynamics of natural convective Prandtl fluid flow subjected to induced magnetic field,” Waves in Random and Com- plex Media, pp. 1–17, 2022. 2022 4.051
A. Kamran and E. Azhar, “Numerical outlook of a viscoelastic nanofluid in an inclined channel via Keller box method,” International Communications in Heat and Mass Transfer, vol. 137, p. 106260, 2022. 2022 6.782
A. Kamran, E. Azhar, N. Akmal, Z. Mehmood, and Z. Iqbal, “Finite Difference Approach for Critical Value Analysis to Describe Jeffery–Hamel Flow Toward an Inclined Channel with Microrotations,” Arabian Journal for Science and Engineering, pp. 1–8, 2022. 2022 2.807
M. Siddique and A. Kashif, “The restricted six-body problem with stable equilibrium points and a rhomboidal configuration,” Advances in Astronomy, vol. 2022. 2022. 2022 1.093
R. Ejaz, S. Ashraf, A. Hassan, and A. Gupta, “An empirical investigation of mar- ket risk, dependence structure, and portfolio management between green bonds and international financial markets,” Journal of Cleaner Production, vol. 365, p. 132666, 2022. 2022 11.072
I. Yousaf, S. Alireza Athari, D. Kirikkaleli, A. Hassan, and S. Ali, “The Role OF Family Control In Determining the Capital Strcuture: Evidence From Non-financial Listed Firms,” Ekonomski pregled, vol. 73, no. 3, pp. 459–481, 2022. 2022
M. Sheraz, D. Xu, A. ullah, J. Ahmed, and Q. Jiang, “Nexus between Energy consumption, Financial Market Development, and Urbanization: evidence from Emerging Economy,” The Singapore Economic Review, pp. 1–20, 2022. 2022 1.736
M. Aksar and J. Ahmed, “Does Managerial Behaviour Matter? Evidence from Emerging Economies,” Global Business Review, p. 09721509221109054, 2022. 2022
U. Farooq, J. Ahmed, W. Akhter, and M. I. Tabash, “Environmental regulations and trade credit activities of corporate sector: A new panel data evidence,” Journal of Cleaner Production, p. 132307, 2022. 2022 11.072
J. Ahmed, U. Farooq, and B. H. Subhani, “The moderating role of information and communication technology in the nexus between financial development, economic growth and energy consumption,” OPEC Energy Review, 2022. 2022
U. Farooq, J. Ahmed, and M. Shahbaz, “How various energy sources affect industrial investment? empirical evidence from asian economies,” Energy, vol. 248, p. 123536, 2022. 2022 7.147
K. K. Kurramovich, A. A. Abro, A. I. Vaseer, S. U. Khan, S. R. Ali, and M. Murshed, “Roadmap for carbon neutrality: the mediating role of clean energy development- related investments,” Environmental Science and Pollution Research, vol. 29, no. 23, pp. 34 055–34 074, 2022. 2022 4.223
Z. Ahmed, M. Ahmad, M. Murshed, A. I. Vaseer, and D. Kirikkaleli, “The trade- off between energy consumption, economic growth, militarization, and co2 emissions: does the treadmill of destruction exist in the modern world?” Environmental Science and Pollution Research, vol. 29, no. 12, pp. 18 063–18 076, 2022. 2022 4.223
S. Kihombo, A. I. Vaseer, Z. Ahmed, S. Chen, D. Kirikkaleli, and T. S. Adebayo, “Is there a tradeoff between financial globalization, economic growth, and environmental sustainability? An advanced panel analysis,” Environmental Science and Pollution Research, vol. 29, p. 3983–3993, 2022. 2022 4.223
S. Faiz, N. Mubarak, S. Safdar, and J. Khan, “A “Curates Egg” Perception of Politics: Why and When Organizational Politics Leads to Good and Bad Outcomes,” Performance Improvement Quarterly, vol. 34, no. 4, pp. 627–648, 2022. 2022
F. Ahmed, I. Ali, S. Kousar, and S. Ahmed, “The environmental impact of industrialization and foreign direct investment: empirical evidence from Asia-Pacific region,” Environmental Science and Pollution Research, vol. 29, no. 20, pp. 29 778–29 792, 2022. 2022 4.223
G. Mustafa, N. Mubarak, J. Khan, M. Nauman, and A. Riaz, “Impact of Leader- Member Exchange on Innovative Work Behavior of Information Technology Project Employees; Role of Employee Engagement and Self-Efficacy,” Employee Responsibilities and Rights Journal, pp. 1–19, 2022. 2022
J. Khan, M. Jaafar, N. Mubarak, and A. K. Khan, “Employee mindfulness, innovative work behaviour, and IT project success: the role of inclusive leadership,” Information Technology and Management, pp. 1–15, 2022. 2022
N. Mubarak, A. Osmadi, J. Khan, A. Mahdiyar, and A. Riaz, “What makes people hide knowledge? influence of passive leadership and creative self-efficacy,” Frontiers in psychology, vol. 12, 2022. 2022 4.232
N. Mubarak, J. Khan, and A. Osmadi, “How does leader’s knowledge hiding kill innovative work behavior,” International Journal of Managing Projects in Business, no. ahead-of-print, 2022. 2022 2.951
N. Mubarak, J. Khan, and A. K. Khan, “Psychological distress and project success: The moderating role of employees’ resilience and mindfulness,” International Journal of Project Management, 2022. 2022 7.172
J. Khan, N. Mubarak, S. A. Khattak, S. Safdar, and M. Jaafar, “Despotic leadership and IT project efficiency: the role of resilience,” International Journal of Managing Projects in Business, 2022. 2022 2.634
I. Yousaf and S. Haqqani, “HIV Treatment Adherence Self-efficacy Scale for Pakistani HIV/AIDS patients: Translation and psychometric evaluation,” Applied Nursing Re- search, vol. 66, p. 151606, 2022. 2022 1.847
S. Zaigham, U. Arshad, and S. Seemab, “Phonological Adaptation of English Loan- words by Urdu Speakers,” Pakistan Languages and Humanities Review, vol. 6, no. 4, pp. 115–128, 2022. 2022
M. F. Alam, M. Uzair, and U. Arshad, “Unfolding Graphic Representation in Sci- ence Textbooks at Intermediate Level: A Narratological Appraisal,” Pakistan Social Sciences Review, vol. 6, no. 2, pp. 918–928, 2022. 2022
A. Khalid, S. Haqqani, and C. Williams, “Guided self-help Urdu version of the living life to the full intervention for secondary school adolescents with low mood and anxiety in Pakistan: A feasibility study,” Heliyon, vol. 8, no. 7, p. e09809, 2022. 2022 3.776
M. Zada, S. Zada, M. Ali, Z. Y. Jun, N. Contreras-Barraza, and D. Castillo, “How classy servant leader at workplace? Linking servant leadership and task performance during the COVID-19 crisis: a moderation and mediation approach,” Frontiers in Psychology, vol. 13, 2022. 2022 4.232
H. B. Khalid and M. I. Khan, “The Role Of Self-Expressive Brands And Brand Tribalism In Advocating Apparel Brands,” Journal of Positive School Psychology, vol. 6, no. 11, pp. 1148–1158, 2022. 2022
M. I. K. Gulfam Murtaza, “LMX Ambivalence and Innovative Work Behavior: A Moderated Mediation Mechanism of Individual Mindfulness and Negative Effect,” Journal of Southwest Jiaotong University, vol. 57, no. 5, 2022. 2022
M. I. K. Haris Bin Khalid, “Psychographic motives and self-concept resonate: A study of loyalty and Advocacy of Fashion in the Millennial Consumers,” Journal of Southwest Jiaotong University, vol. 57, no. 5, 2022. 2022
F. W. Mir and N. T. Bhutta, “Impact of return and volatility spillover from banking industry to other industries: Evidence from Pakistan,” International Journal of Finance & Economics, 2022. 2022 1.634
R. Yousaf and N. Bhutta, “Impact of Electioneering on Currency and Stock Market; Evidence from South Asian Countries,” Studies of Applied Economics, vol. 40, no. 2, 2022. 2022
G. K. Qureshi and N. T. Bhutta, “Bivariate Hedging Between Crypto-Currency and Traditional Assets,” Journal of Positive School Psychology, vol. 6, no. 11, pp. 545–568, 2022. 2022
T. Ahmed, Q. A. Malik, B. Z. Butt, and M. Aksar, “Role of Corporate Governance to Restrict Tunneling Activities of Foreign Institutional Investors in the Pakistan Stock Market,” The International Trade Journal, pp. 1–12, 2022. 2022
U.-e. Rubbab, S. M. M. R. Naqvi, M. Irshad, and R. Zakariya, “Impact of supervisory delegation on employee voice behavior: role of felt obligation for constructive change and voice climate,” European Journal of Training and Development, 2022. 2022
R. Zakariya and S. Muhammad Mehdi Raza Naqvi, “Leader instigated task conflict and its effects on employee job crafting; the mediating role of employee attributions,” PLOS ONE, vol. 17, no. 12, pp. 1–14, 2022. 2022 3.752
S. Alzarea, M. Abbas, P. J. Ronan, K. Lutfy, and S. Rahman, “The Effect of an α-7 Nicotinic Allosteric Modulator PNU120596 and NMDA Receptor Antagonist Memantine on Depressive-like Behavior Induced by LPS in Mice: The Involvement of Brain Microglia,” Brain Sciences, vol. 12, no. 11, p. 1493, 2022. 2022 3.333
H. Hussain, L. Rashan, U. Hassan, M. Abbas, F. L. Hakkim, and I. R. Green, “Frank- incense diterpenes as a bio-source for drug discovery,” Expert Opinion on Drug Discovery, vol. 17, no. 5, pp. 513–529, 2022. 2022 6.098
M. Aslam, K. Barkat, N. S. Malik, M. S. Alqahtani, I. Anjum, I. Khalid, U. R. Tulain, N. Gohar, H. Zafar, A. C. Paiva-Santos et al., “pH Sensitive Pluronic Acid/Agarose- Hydrogels as Controlled Drug Delivery Carriers: Design, Characterization and Toxicity Evaluation,” Pharmaceutics, vol. 14, no. 6, p. 1218, 2022. 2022 6.525
S. I. Shah, F. Nasir, N. S. Malik, M. Alamzeb, M. Abbas, I. U. Rehman, F. Khuda, Y. Shah, K. W. Goh, A. Zeb et al., “Efficacy Evaluation of 10-Hydroxy Chondrofoline and Tafenoquine against Leishmania tropica (HTD7),” Pharmaceuticals, vol. 15, no. 8, p. 1005, 2022. 2022 5.215
F. Akhtar, U. R. Tulain, A. Erum, M. Ahmad, A. Rashid, N. S. Malik, and H. Ijaz, “Impact of various monomers on release of losartan potassium from guar gum based polymeric network,” Pakistan Journal of Pharmaceutical Sciences, vol. 35, no. 5, 2022. 2022 0.863
A. Erum, U. R. Tulain, A. Maqsood, N. S. Malik, A. Rashid, L. Z. Warraich et al., “Fabrication and comparative appraisal of natural and synthetic polymeric pH responsive nanoparticles for effective delivery of dexlansoprazole,” Polymer Bulletin, pp. 1–17, 2022. 2022 2.843
A. Baloch, M. Ahmad, M. U. Minhas, S. F. Badshah, K. Barkat, M. Suhail, and N. S. Malik, “Fabrication of swellable PEGylated hydrogel by free radical polymerization for controlled delivery of non-steroidal anti-inflammatory drug; characterization and statistical analysis,” Particulate Science and Technology, pp. 1–14, 2022. 2022 2.628
W. Ahmad, I. Khalid, K. Barkat, M. U. Minhas, I. U. Khan, H. K. Syed, N. S. Mali, A. Jamshed, A. Ikram, and M. Badshah, “Development and evaluation of polymeric nanogels to enhance solubility of letrozole,” Polymer Bulletin, pp. 1–32, 2022. 2022 2.483
N. Shahid, A. Erum, M. Zaman, U. R. Tulain, Q.-u.-a. Shoaib, N. S. Malik, R. Kausar, A. Rashid, and U. Rehman, “Synthesis and evaluation of chitosan based controlled re- lease nanoparticles for the delivery of ticagrelor,” Designed Monomers and Polymers, vol. 25, no. 1, pp. 55–63, 2022. 2022 2.65
M. U. Minhas, S. Ahmad, K. U. Khan, M. Sohail, O. Abdullah, I. Khalid, and N. S. Malik, “Synthesis And Evaluation of Polyethylene Glycol-4000-Co-Poly (AMPS) Based Hydrogel Membranes for Controlled Release of Mupirocin for Efficient Wound Healing,” Current drug delivery, 2022. 2022 2.565
A. Mahmood, A. Erum, S. Mumtaz, U. R. Tulain, N. S. Malik, and M. S. Alqahtani, “Preliminary Investigation of Linum usitatissimum Mucilage-Based Hydrogel as Possible Substitute to Synthetic Polymer-Based Hydrogels for Sustained Release Oral Drug Delivery,” Gels, vol. 8, no. 3, p. 170, 2022. 2022 4.702
U. Laraib, U. R. Tulain, A. Erum, M. A. Hussain, N. S. Malik, A. Rashid, S. Kausar, and H. Ijaz, “Development and evaluation of Artemisia vulgaris mucilage-based polymeric network for controlled drug delivery,” Pakistan Journal of Pharmaceutical Sciences, vol. 35, no. 2, 2022. 2022 0.684
D. Badshah, S. Faisal, D. Khan, K. Ullah, D. Malik, N. Shafmshad, D. Suhail, D. Jan et al., “Structural and In-Vitro Characterization of Highly Swellable B-Cyclodextrin Polymeric Nanogels Fabricated by Free Radical Polymerization for Solubility Enhancement of Rosuvastatin,” JDDST-D-22-01017, 2022. 2022 3.981
A. M. Zubair, M. N. H. Malik, W. Younis, M. A. H. Malik, S. Jahan, I. Ahmed, A. Yuchi, M. N. Mushtaq, R. Tahir, M. B. Sarwar et al., “Novel acetamide derivatives of 2-aminobenzimidazole prevent inflammatory arthritis in rats via suppression of pro- inflammatory mediators,” Inflammopharmacology, pp. 1–15, 2022. 2022 5.093
A. Bukhari, H. Nadeem, S. Sarwar, I. Abbasi, M. T. Khan, I. Hamid, and U. Bukhari, “Exploring Therapeutic Potential of 1, 3, 4-Oxadiazole Nucleus as Anticancer Agents: A Mini-Review.” Medicinal Chemistry (Shariqah (United Arab Emirates)), 2022. 2022 2.329
M. Muddassir, A. Batool, M. Alam, G. Abbas Miana, R. Altaf, S. Alghamdi, M. Almehmadi, O. Abdulaziz, A. Amer Alsaiari, M. Umar Khayam Sahibzada, A. Khusro, and M. Tariq Khan, “Evaluation of in vitro, in silico antidiabetic and antioxidant potential of bioactivity based isolated “Pakistanine” from Berberis baluchistanica,” Arabian Journal of Chemistry, vol. 15, no. 11, p. 104221, 2022. 2022 6.212
A. Batool, G. A. Miana, M. Alam, M. T. Khan, M. Muddassir, W. Zaman, S. Khan, A. Aman, A. Khusro, M. V. Arasu et al., “Bioassay-guided fractionation and isolation of Arctigenin from Saussurea heteromalla for in vitro and in silico cytotoxic activity against HeLa cells,” Physiological and Molecular Plant Pathology, vol. 117, p. 101749, 2022. 2022 2.747
I. Ajmal, M. A. Farooq, S. Q. Abbas, J. Shah, M. Majid, and W. Jiang, “Isoprenaline and salbutamol inhibit pyroptosis and promote mitochondrial biogenesis in arthritic chondrocytes by downregulating β-arrestin and GRK2.” Frontiers in pharmacology, vol. 13, pp. 996 321–996 321, 2022. 2022 5.988
M. W. Baig, M. Majid, B. Nasir, S. S. ul Hassan, S. Bungau, and I.-u. Haq, “Toxicity evaluation induced by single and 28-days repeated exposure of withametelin and daturaolone in Sprague Dawley rats,” Frontiers in Pharmacology, vol. 13, p. 3690, 2022. 2022 5.988
I. Bano, P. Horky, S. Q. Abbas, M. Majid, A. H. M. Bilal, F. Ali, T. Behl, S. S. u. Hassan, and S. Bungau, “Ferroptosis: A New Road towards Cancer Management,” Molecules, vol. 27, no. 7, p. 2129, 2022. 2022 4.927
M. Majid, A. Farhan, M. I. Asad, M. R. Khan, S. S. u. Hassan, I.-u. Haq, and S. Bungau, “An Extensive Pharmacological Evaluation of New Anti-Cancer Triter- penoid (Nummularic Acid) from Ipomoea batatas through In Vitro, In Silico, and In Vivo Studies,” Molecules, vol. 27, no. 8, p. 2474, 2022. 2022 4.927
I. Naz, M. R. Khan, J. A. Zai, R. Batool, S. Maryam, and M. Majid, “Indigofera linifolia ameliorated ccl4 induced endoplasmic reticulum stress in liver of rat,” Journal of Ethnopharmacology, vol. 285, p. 114826, 2022. 2022 4.36
I. Hamid, H. Nadeem, S. F. Ansari, S. Khiljee, I. Abbasi, A. Bukhari, M. Arif, and M. Imran, “2-Substituted Benzoxazoles as Potent Anti-Inflammatory Agents: Synthe- sis, Molecular Docking and In Vivo Anti-Ulcerogenic Studies,” Medicinal Chemistry (Shariqah (United Arab Emirates)), vol. 18, no. 7, pp. 791–809, 2022. 2022 2.329
Y. Hussain, K. F. Alsharif, M. Aschner, A. Theyab, F. Khan, L. Saso, and H. Khan, “Therapeutic Role of Carotenoids in Blood Cancer: Mechanistic Insights and Therapeutic Potential,” Nutrients, vol. 14, no. 9, p. 1949, 2022. 2022 6.706
L. Saso, “How Curcumin Targets Inflammatory Mediators in Diabetes: Therapeutic Insights and Possible Solutions,” Molecules, vol. 27, no. 13, p. 4058, 2022. 2022 4.927
A. W. Khan, Z. ul Abidin, M. U. K. Sahibzada, M. Faheem, N. G. Qazi, M. Alam, I. Ullah, J. Uddin, A. Khan, and A. Al-Harrasi, “Potential biomedical applications of Araucaria araucana as an antispasmodic, bronchodilator, vasodilator, and antiemetic: Involvement of calcium channels,” Journal of Ethnopharmacology, vol. 298, p. 115651, 2022. 2022 5.195
I. Ahmad, M. F. A. Khan, A. Rahdar, S. Hussain, F. K. Tareen, M. W. Salim, N. Ajalli, M. I. Amirzada, and A. Khan, “Design and Evaluation of pH Sensitive PEG- Protamine Nanocomplex of Doxorubicin for Treatment of Breast Cancer,” Polymers, vol. 14, no. 12, p. 2403, 2022. 2022 4.967
M. Saood, R. Yasmin et al., “Factors and Predictors of Health-Related Quality of Life of the General Population of Pakistan,” Frontiers in Public Health, vol. 10, 2022. 2022 6.461
2021
M. Chaudhary and M. M. Ahmed, “Inline pseudoelliptic waveguide filters using asym­metric Iris coupled transverse rectangular ridge resonators,” International Journal of Microwave and Wireless Technologies, pp. 1-9, 2021. 2021 0.939
K. S. Karimov, M. Saleem, K. M. Akhmedov, M. M. Ahmed, A. Hassan, and S. Shafique, “Orange Dye Based Temperature Sensor,” Proceedings of the Roma­nian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 22, no. 2, pp. 173-178, 2021. 2021 1.523
M. M. Ahmed, K. Karimov, and U. F. Ahmed, “An improved model to predict DC characteristics of organic field-effect transistors,” Journal of Computational Electron­ics, vol. 20, p. 2342-2349, 2021. 2021 1.807
M. A. Chaudhary and M. M. Ahmed, “Inline Waveguide Pseudo-Elliptic Filters Using Non-Resonating Modes with Folded-Waveguide Resonators,” IEEE Access, vol. 9, pp. 140 841-140 852, 2021. 2021 3.367
U. F. Ahmed, M. M. Ahmed et al., “A Unified Depletion/Inversion Model for Het­erojunction Trigate FinFETs DC Characteristics,” IEEE Access, vol. 9, pp. 89 768­89 777, 2021. 2021 3.367
M. S. Khan, N. M. Khan, A. Khan, F. Aadil, M. Tahir, and M. Sarfaraz, “A low- complexity, energy-efficient data securing model for wireless sensor network based on linearly complex voice encryption mechanism of GSM technology,” International Journal of Distributed Sensor Networks, vol. 17, no. 5, p. 15501477211018623, 2021. 2021 1.64
N. Hassan, and N. M., Khan, “Cost-effective reliable transmission service for Internet of Flying Things,” International Journal of Distributed Sensor Networks, vol. 7, no. 6, p. 15501477211017820, 2021. 2021 1.64
S. J. Nawaz, S. K. Sharma, B. Mansoor, M. N. Patwary, and N. M. Khan, “Non­coherent and backscatter communications: Enabling ultra-massive connectivity in 6G wireless networks,” IEEE Access, vol. 9, pp. 38144-38186, 2021. 2021 3.745
H. Raza, G. Hussain, and N. KHAN, “Low communication parallel distributed adap­tive signal processing (LC-PDASP) architecture for processing-inefficient platforms,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 29, no. 2, pp. 663-672, 2021. 2021 0.682
K. Shehzad, N. M. Khan, and J. Ahmed, “Performance analysis of coverage-centric heterogeneous cellular networks using dual-slope path loss model,” Computer Net­works, vol. 185, p. 107672, 2021. 2021 3.111
S. B. Javed, A. A. Uppal, R. Samar, and A. I. Bhatti, “Design and implementation of multi-variable H^ robust control for the underground coal gasification project Thar,” Energy, vol. 216, p. 119000, 2021. 2021 7.147
M. Khattak, A. A. Uppal, Q. Khan, A. I. Bhatti, Y. M. Alsmadi, V. I. Utkin, and I. Chairez, “Neuro-adaptive sliding mode control for underground coal gasifi­cation energy conversion process,” International Journal of Control, pp. 1-12, 2021. 2021 2.888
M. S. Awan, M. Aslam, M. Liaquat, A. Bhatti, and A. Liaquat, “Effect of pharmacodynamical interaction between nutlin-3a and aspirin in the activation of p53,” Journal of Theoretical Biology, vol. 522, p. 110696, 2021. 2021 2.691
H. M. Y. Naeem, A. I. Bhatti, Y. A. Butt, and Q. Ahmed, “Eco-driving control of elec­tric vehicle with battery dynamic model and multiple traffic signals,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, p. 09544070211037468, 2021. 2021 1.484
S. B. Javed, V. I. Utkin, A. A. Uppal, R. Samar, and A. I. Bhatti, “Data-Driven Modeling and Design of Multivariable Dynamic Sliding Mode Control for the Un­derground Coal Gasification Project Thar,” IEEE Transactions on Control Systems Technology, vol. 30, no. 1, pp. 153-165, 2021. 2021 5.312
I. Khan, F. Waheed, Q. Khan, A. I. Bhatti, R. Ullah, and R. Akmeliawati, “A Linear Parameter Varying Strategy based Integral Sliding Mode Control Protocol Develop­ment and Its Implementation on Ball and Beam Balancer,” IEEE Access, vol. 9, pp. 74 437-74 445, 2021. 2021 3.745
R. Anjum, A. Yar, G. Murtaza, Q. Ahmed, and A. Bhatti, “Model Based Unified Framework for Detection and Mitigation of Cyclic Torque Imbalance in a Gasoline Engine,” Journal of Engineering for Gas Turbines and Power, vol. 143, no. 7, p. 071013, 2021. 2021 1.804
N. Siddique and F. U. Rehman, “Hybrid synchronization and parameter estimation of a complex chaotic network of permanent magnet synchronous motors using adaptive integral sliding mode control,” Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 69, no. 3, pp. e137056-e137056, 2021. 2021 1.662
F. U. Rehman, N. Mehmood, S. U. Din, M. R. Mufti, and H. Afzal, “Adaptive Sliding Mode Based Stabilization Control for the Class of Underactuated Mechanical Systems,” IEEE Access, vol. 9, pp. 26 607-26 615, 2021. 2021 3.745
F. ur Rehman, I. Shah, and W. Abbasi, “Smooth Second Order Sliding Mode Sta­bilization of Underactuated Two-Link Manipulators: The Acrobot and Pendubot Examples,” 2021. 2021
M. Ghafoor, S. A. Tariq, T. Zia, I. A. Taj, A. Abbas, A. Hassan, and A. Y. Zomaya, “Fingerprint Identification with Shallow Multifeatured View Classifier,” IEEE trans­actions on cybernetics, vol. 51, no. 9, pp. 4515-4527, 2021. 2021 11.448
I. A. Taj, M. Sajid, K. S. Karimov et al., “An ensemble framework based on Deep CNNs architecture for glaucoma classification using fundus photography,” Mathemat­ical Biosciences and Engineering, vol. 18, no. 5, pp. 5321-5346, 2021. 2021 2.08
I. Ahmad, H. Sun, U. Rafique, and Z. Yi, “Triangular Slot-Loaded Wideband Pla­nar Rectangular Antenna Array for Millimeter-Wave 5G Applications,” Electronics, vol. 10, no. 7, p. 778, 2021. 2021 2.412
M. S. Iqbal, Y. A. K. Niazi, U. A. Khan, and B.-W. Lee, “Real-time fault detection system for large scale grid integrated solar photovoltaic power plants,” International Journal of Electrical Power & Energy Systems, vol. 130, p. 106902, 2021. 2021 4.63
S. Janjua, I. Hassan, M. U. Ali, M. M. Ibrahim, A. Zafar, and S. Kim, “Addressing Social Inequality and Improper Water Distribution in Cities: A Case Study of Karachi, Pakistan,” Land, vol. 10, no. 11, 2021. 2021 3.395
M. Hassan and I. Hassan, “Improving artificial neural network-based streamflow fore­casting models through data preprocessing,” KSCE Journal of Civil Engineering, vol. 25, pp. 1-13, 2021. 2021 1.515
I. Parvez, J. Shen, I. Hassan, and N. Zhang, “Generation of Hydro Energy by Using Data Mining Algorithm for Cascaded Hydropower Plant,” Energies, vol. 14, no. 2, p. 298, 2021. 2021 2.702
H. U. Din, I. Waris, O. B. Rizwan, and M. Ali, “Energy Dissipation in 3D Structure having Multiple Uplifts During Dynamic Loading,” Arabian Journal for Science and Engineering, vol. 46, no. 5, pp. 4503-4520, 2021. 2021 2.334
M. Khan, M. Cao, C. Xie, and M. Ali, “Hybrid fiber concrete with different basalt fiber length and content,” Structural Concrete, 2021. 2021 3.131
M. Khan, M. Cao, C. Xie, and M. Ali, “Efficiency of basalt fiber length and content on mechanical and microstructural properties of hybrid fiber concrete,” Fatigue & Fracture of Engineering Materials & Structures, vol. 44, no. 8, pp. 2135-2152, 2021. 2021 3.031
A. Waheed, M. U. Arshid, R. A. Khalid, and S. S. S. Gardezi, “Soil Improvement Using Waste Marble Dust for Sustainable Development,” Civil Engineering Journal, vol. 7, no. 9, pp. 1594-1607, 2021. 2021
D. Shuja, S. S. S. Gardezi, and M. R. Idrees, “Prospects of Transforming Conven­tional Commercial Buildings to Net Zero Energy Building-Balancing the Economic Aspects with Energy Patterns,” Scientific Journal of Riga Technical University. En­vironmental and Climate Technologies, vol. 25, no. 1, pp. 990-1002, 2021. 2021
S. S. S. Gardezi, N. Shafiq, I. Hassan, and M. U. Arshid, “Life Cycle Carbon Footprint Assessments, Case Study of Malaysian Housing Sector,” Scientific Journal of Riga Technical University. Environmental and Climate Technologies, vol. 25, no. 1, pp. 1003-1017, 2021. 2021
I. Hasan, S. S. S. Gardez, and U. Hussain, “BIM-Based Energy Optimization-Case study of High-Rise Building in Pakistan,” Journal of Sustainability Perspectives, vol. 1, no. 1, 2021. 2021
B. Manzoor, I. Othman, S. S. S. Gardezi, and E. Harirchian, “Strategies for Adopting Building Information Modeling (BIM) in Sustainable Building Projects—A Case of Malaysia,” Buildings, vol. 11, no. 6, p. 249, 2021. 2021 2.648
B. Manzoor, I. Othman, S. S. S. Gardezi, H. Altan, and S. B. Abdalla, “BIM-Based Research Framework for Sustainable Building Projects: A Strategy for Mitigating BIM Implementation Barriers,” Applied Sciences, vol. 11, no. 12, p. 5397, 2021. 2021 2.679
S. S. S. Gardezi, N. Shafiq, and M. W. A. Khan, “Relational pre-impact assess­ment of conventional housing features and carbon footprint for achieving sustainable built environment,” Environment, Development and Sustainability, pp. 1-23, 2021. 2021 3.219
Hasan, Irbaz and Gardezi, Syed Shujaa Safdar and Hussain, Usman, “BIM-enabled energy analysis for sustainability: A case study of high rise building,” Environmental and Toxicology Studies Journal, vol. 4, no. 2, 2021. 2021
S. Janjua, I. Hassan, S. Muhammad, and S. Ahmed, “Water management in Pak­istan’s Indus Basin: challenges and opportunities,” Water Policy, vol. 23, no. 6, pp. 1329-1343, 2021. 2021 1.434
H. F. Ahmed, F. K. Malik, and M. M. Khan, “Influence of passive wake control on thermal-hydraulic performance of a cylinder confined in wavy channel under high blockage ratios,” Thermophysics and Aeromechanics, 2021. 2021 1.023
L. A. Khan and M. M. Khan, “Influence of angular orientation of fins on thermal charging and discharging performance of latent heat storage unit,” High Temperature, vol. 59, 2021. 2021 1.094
Hussain, Liaqat and Khan, Muhammad Mahabat and Masud, Manzar and Ahmed, Fawad and Rehman, Zabdur and Amanowicz, Lukasz and Rajski, Krzysztof, “Heat transfer augmentation through different jet impingement techniques: A state-of-the- art review,” Energies, vol. 14, no. 20, 2021. 2021
L. A. Khan, M. M. Khan, H. F. Ahmed, M. Irfan, D. Brabazon, and I. U. Ahad, “Dom­inant roles of eccentricity, fin design, and nanoparticles in performance enhancement of latent thermal energy storage unit,” Journal of Energy Storage, vol. 43, p. 103181, 2021. 2021 6.583
M. S. Shafiq, M. M. Khan, and M. Irfan, “Performance enhancement of double-wall- heated rectangular latent thermal energy storage unit through effective design of fins,” Case Studies in Thermal Engineering, vol. 27, p. 101339, 2021. 2021 4.724
R. Qaiser, M. M. Khan, L. A. Khan, and M. Irfan, “Melting performance enhancement of PCM based thermal energy storage system using multiple tubes and modified shell designs,” Journal of Energy Storage, vol. 33, p. 102161, 2021. 2021 3.762
L. Hussain and M. Khan, “Passive Control of Vortex Shedding and Drag Reduction in Laminar Flow across Circular Cylinder Using Wavy Wall Channel,” Fluid Dynamics, vol. 56, no. 2, pp. 262-277, 2021. 2021 0.61
N. N. Malik and M. J. Hyder, “Study of Factors Influencing the Thrust Response of Convergent Nozzle Block,” Journal of the Chinese Society of Mechanical Engineers, vol. 42, no. 1, pp. 121-130, 2021. 2021 0.211
Y. Zulfiqar, M. J. Hyder, A. Jehanzeb, H. W. Ahmad, A. Zulfiqar, and U. M. Chaudry, “Structural Assessment of a Cylindrical Liquid Tank due to Shape Change of Roof during Sloshing Induced by Seismic Activity,” Arabian Journal for Science and En­gineering, vol. 46, p. 8075-8085, 2021. 2021 2.334
A. J. Joya, M. J. Hyder, and Y. Zulfiqar, “Nonlinear response of acid storage tank coupled with piping attachment under seismic load for optimal safe design,” Latin American Journal of Solids and Structures, vol. 18, no. 1, 2021. 2021 1.256
F. ul Hasnain, M. Irfan, M. M. Khan, L. A. Khan, and H. F. Ahmed, “Melting perfor­mance enhancement of a phase change material using branched fins and nanoparticles for energy storage applications,” Journal of Energy Storage, vol. 38, p. 102513, 2021. 2021 3.762
T. Zahid, M. H. Agha, S. S. Warsi, and U. Ghafoor, “Redefining Critical Tasks for Responsive and Resilient Scheduling-an Intelligent Fuzzy Heuristic Approach,” IEEE Access, vol. 9, pp. 145 513-145 521, 2021. 2021 3.367
R. A. Liaqait, S. S. Warsi, T. Zahid, U. Ghafoor, M. S. Ahmad, and J. Selvaraj, “A Decision Framework for Solar PV Panels Supply Chain in Context of Sustainable Supplier Selection and Order Allocation,” Sustainability, vol. 13, no. 23, p. 13216, 2021. 2021 3.251
S. S. Warsi, T. Zahid, H. Elahi, R. A. Liaqait, S. Bibi, F. Gillani, and U. Ghafoor, “Sustainability-Based Analysis of Conventional to High-Speed Machining of Al 6061- T6 Alloy,” Applied Sciences, vol. 11, no. 19, p. 9032, 2021. 2021 2.679
R. Liaqait, S. Hamid, S. Warsi, and A. Khalid, “A Critical Analysis of Job Shop Scheduling in Context of Industry 4.0,” Sustainability, vol. 13, p. 7684, 2021. 2021 3.251
R. A. Liaqait, S. S. Warsi, M. H. Agha, T. Zahid, and T. Becker, “A multi-criteria decision framework for sustainable supplier selection and order allocation using multi-­objective optimization and fuzzy approach,” Engineering Optimization, pp. 1-22, 2021. 2021 2.165
M. Khan, A. Khalid, W. A. Lughmani, and M. M. Khan, “A use case of exclusive economic zone of Pakistan for wave power potential estimation,” Ocean Engineering, vol. 237, p. 109664, 2021. 2021 3.795
S. Rasheed, W. A. Lughmani, M. A. Obeidi, D. Brabazon, and I. U. Ahad, “Additive Manufacturing of Bone Scaffolds Using PolyJet and Stereolithography Techniques,” Applied Sciences, vol. 11, no. 1-6, p. 7336, 2021. 2021 2.679
G. Xu, Z. Guan, L. Yue, J. Mumtaz, and J. Liang, “Modeling and Optimization for Multi-Objective Nonidentical Parallel Machining Line Scheduling with a Jumping Process Operation Constraint,” Symmetry, vol. 13, no. 8, p. 1521, 2021. 2021 2.713
L. Yue, Y. Chen, J. Mumtaz, and S. Ullah, “Dynamic Mixed Model Lot sizing and Scheduling for Flexible Machining Lines Using a Constructive Heuristic,” Processes, vol. 9, no. 7, p. 1255, 2021. 2021 2.847
L.-Y. Yuan, P.-W. Han, G. Asghar, B.-L. Liu, J.-P. Li, B. Hu, P.-H. Fu, and L.-M. Peng, “Development of High Strength and Toughness Non-Heated Al-Mg-Si Alloys for High-Pressure Die-Casting,” Acta Metallurgica Sinica (English Letters), vol. 34, no. 6, pp. 845-860, 2021. 2021 2.755
U. Zia, H. Aslam, W. Awan, M. Zulfiqar, and A. Awan, “Levelized Cost Based Eco­nomic Assessment of Waste-to-Energy Conversion Technologies in Pakistan,” Engi­neering Proceedings, vol. 12, no. 1, p. 2, 2021. 2021 2.847
M. Masud, M. S. Al Kharusi, M. U. Ali, A. Mubashar, S. J. Hussain, A. Tariq, G. U. Rehman, M. H. Akhtar, and S. Javeed, “Prediction of the Ultimate Strength of Notched and Unnotched IM7/977-3 Laminated Composites Using a Micromechanics Approach,” Polymers, vol. 13, no. 20, p. 3491, 2021. 2021 4.329
M. U. Ali, S. Saleem, H. Masood, K. D. Kallu, M. Masud, M. J. Alvi, and A. Za- far, “Early hotspot detection in photovoltaic modules using color image descriptors: An infrared thermography study,” International Journal of Energy Research, 2021 2021 5.164
S. Tariq, A. Tariq, M. Masud, and Z. Rehman, “Minimizing the Casting Defects in High Pressure Die Casting Using Taguchi Analysis,” Scientia Iranica, 2021. 2021 1.435
H. Waqas and M. A. Qadir, “Multilayer heuristics based clustering framework (MHCF) for author name disambiguation,” Scientometrics, vol. 126, no. 9, pp. 7637­7678, 2021. 2021 2.867
I. Ihsan and M. A. Qadir, “An NLP-based citation reason analysis using CCRO,” Scientometrics, vol. 126, no. 6, pp. 4769-4791, 2021. 2021 2.867
S. R. Aziz, T. A. Khan, and A. Nadeem, “Inheritance metrics feats in unsupervised learning to classify unlabeled datasets and clusters in fault prediction,” PeerJ Com­puter Science, vol. 7, p. e722, 2021. 2021 1.392
R. Muhammad, A. Nadeem, and M. A. Sindhu, “Vovel metrics-novel coupling met­rics for improved software fault prediction,” PeerJ Computer Science, vol. 7, p. e590, 2021. 2021 1.392
M. Rizwan, A. Nadeem, S. Sarwar, M. Iqbal, M. Safyan, and Z. Ul Qayyum, “EkmEx- An Extended Framework for Labeling an Unlabeled Fault Dataset,” Multimedia Tools and Applications, 2021. 2021 2.757
S. R. Aziz, T. A. Khan, and A. Nadeem, “Exclusive use and evaluation of inheri­tance metrics viability in software fault prediction—an experimental study,” PeerJ Computer Science, vol. 7, p. e563, 2021. 2021 1.392
M. Bano, A. Qayyum, R. N. B. Rais, and S. S. A. Gilani, “Soft-Mesh: A Robust Routing Architecture for Hybrid SDN and Wireless Mesh Networks,” IEEE Access, vol. 9, pp. 87 715-87 730, 2021. 2021 3.367
Bin Waheed, Muhammad Hamza and Jamil, Faisal and Qayyum, Amir and Jamil, Harun and Cheikhrouhou, Omar and Ibrahim, Muhammad and Bhushan, Bharat and Hmam, Habib, “A new efficient architecture for adaptive bit-rate video streaming,” Sustainability, vol. 13, no. 8, p. 4541, 2021. 2021 2.576
S. Irfan, N. Anjum, N. Masood, A. S. Khattak, and N. Ramzan, “A Novel Hybrid Deep Learning Model for Human Activity Recognition Based on Transitional Activities,” Sensors, vol. 21, no. 24, p. 8227, 2021. 2021 3.576
A. Lakhan, M. A. Dootio, F. Alqahtani, I. R Alzahrani, F. Baothman, S. Y. Shah, S. A. Shah, N. Anjum, Q. H. Abbasi, M. S. Khokhar et al., “Hybrid work­load enabled and secure healthcare monitoring sensing framework in distributed fog-cloud network,” Electronics, vol. 10, no. 16, p. 1974, 2021. 2021 2.397
U. Saeed, S. Y. Shah, A. Zahid, J. Ahmad, M. A. Imran, Q. H. Abbasi, and S. A. Shah, “Wireless Channel Modelling for Identifying Six Types of Respiratory Patterns with SDR Sensing and Deep Multilayer Perceptron,” IEEE Sensors Journal, vol. 21, no. 18, pp. 20 833-20 840, 2021. 2021 3.301
A. M. Qureshi, N. Anjum, R. N. B. Rais, M. Ur-Rehman, and A. Qayyum, “De­tection of malicious consumer interest packet with dynamic threshold values,” PeerJ Computer Science, vol. 7, p. e435, 2021. 2021 3.091
S. Alam, M. Shuaib, W. Z. Khan, S. Garg, G. Kaddoum, M. S. Hossain, and Y. B. Zikria, “Blockchain-based Initiatives: Current state and challenges,” Computer Net­works, vol. 198, p. 108395, 2021. 2021 4.474
A. Tahir, N. Shah, S. A. Abid, W. Z. Khan, A. K. Bashir, and Y. B. Zikria, “A three-dimensional clustered peer-to-peer overlay protocol for mobile ad hoc networks,” Computers & Electrical Engineering, vol. 94, p. 107364, 2021. 2021 3.818
I. Shahzad, A. Maqbool, T. Rana, A. Mirza, W. Z. Khan, S. W. Kim, Y. B. Zikria, and S. Din, “Blockchain-based green big data visualization: BGbV,” Complex & Intelligent Systems, pp. 1-12, 2021. 2021 4.927
S. Tahir, M. M. Raja, N. Razzaq, A. Mirza, W. Z. Khan, S. W. Kim, and Y. B. Zikria, “Extended Kalman Filter-Based power line interference canceller for electro­cardiogram signal,” Big Data, 2021. 2021 2.128
S. Ahmed, A. S. M. Noor, W. Z. Khan, and M. S. E. Mohamed, “Analysis of student attitude and their acceptance for e-Evaluation during (COVID-19): Implementation and Implications,” Journal of University of Shanghai for Science and Technology, 2021. 2021
M. Kashif, A. Hussain, A. Munir, A. B. Siddiqui, A. Abbasi, M. Aakif, A. J. Malik, F. E. Alazemi, and O.-Y. Song, “A machine learning approach for expression detection in healthcare monitoring systems,” Computers, Materials & Continua, vol. 67, no. 2, pp. 2123-2139, 2021. 2021 3.772
R. Gulbaz, A. B. Siddiqui, N. Anjum, A. A. Alotaibi, T. Althobaiti, and N. Ramzan, “Balancer Genetic Algorithm—A Novel Task Scheduling Optimization Approach in Cloud Computing,” Applied Sciences, vol. 11, no. 14, p. 6244, 2021. 2021 2.679
F. S. Ujager, A. Mahmood, M. Usman, and M. S. Rathore, “A Hierarchical En­ergy Conservation Framework (HECF) of Wireless Sensor Networks by Temporal Association Rule Mining for Smart Buildings,” Egyptian Informatics Journal, 2021. 2021 3.943
J. Mir, M. Azhar, and S. Khatoon, “Multi-Level Knowledge Engineering Approach for Mapping Implicit Aspects to Explicit Aspects,” Computers, Materials and Continua, vol. 70, no. 2, pp. 3491-3509, 2021. 2021 3.772
Y. Abbas and M. Malik, “Defective products identification framework using online reviews,” Electronic Commerce Research, pp. 1-22, 2021. 2021 3.747
A. Nawaz and M. Malik, “Rising stars prediction in reviewer network,” Electronic Commerce Research, pp. 1-23, 2021. 2021 3.747
M. Sulaiman, Z. Halim, M. Waqas, and D. Aydin, “A hybrid list-based task scheduling scheme for heterogeneous computing,” The Journal of Supercomputing, vol. 77, pp. 1-37, 2021. 2021 2.469
M. Sulaiman, Z. Halim, M. Lebbah, M. Waqas, and S. Tu, “An Evolutionary Computing-Based Efficient Hybrid Task Scheduling Approach for Heterogeneous Computing Environment,” Journal of Grid Computing, vol. 19, no. 1, pp. 1-31, 2021. 2021 2.095
F. Saleem, M. N. Majeed, J. Iqbal, A. Waheed, A. Rauf, M. Zareei, and E. M. Mohamed, “Ant Lion Optimizer Based Clustering Algorithm for Wireless Body Area Networks in Livestock Industry,” IEEE Access, vol. 9, pp. 114 495-114 513, 2021. 2021 3.367
Adnan, Muhammad and Iqbal, Jawaid and Waheed, Abdul and Amin, Noor and Zareei, Mahdi and Umer, Asif and Mohamed, Ehab, “Towards the design of efficient 9 and secure architecture for software-defined vehicular networks,” Sensors, vol. 21, p. 3902, 2021. 2021 3.576
and secure architecture for software-defined vehicular networks,” Sensors, vol. 21, p. 3902, 2021. 2021 3.57
J. Iqbal, A. I. Umar, A. N. Ul, A. Waheed, S. Abdullah, M. Zareei, and M. A. K. Khattak, “Efficient network selection using multi fuzzy criteria for confidential data transmission in wireless body sensor networks,” Journal of Intelligent & Fuzzy Sys­tems, vol. 41, no. 1, pp. 31-55, 2021. 2021 1.851
M. Adnan, J. Iqbal, A. Waheed, N. U. Amin, M. Zareei, S. Goudarzi, and A. Umer, “On the Design of Efficient Hierarchic Architecture for Software Defined Vehicular Networks,” Sensors, vol. 21, no. 4, p. 1400, 2021. 2021 3.275
L. P. Shin et al., “Usability Study on Healthy Food Restaurant Finder,” Turkish Journal of Computer and Mathematics Education (TURCOMAT), vol. 12, no. 3, pp. 1745-1753, 2021. 2021
S. Qaiser et al., “A Comparison of Machine Learning Techniques for Sentiment Anal­ysis,” Turkish Journal of Computer and Mathematics Education (TURCOMAT), vol. 12, no. 3, pp. 1738-1744, 2021. 2021
S. A. Raza, M. A. Qureshi, M. Ahmed, S. Qaiser, R. Ali, and F. Ahmed, “Non­linear relationship between tourism, economic growth, urbanization, and environmen­tal degradation: evidence from smooth transition models,” Environmental Science and Pollution Research, vol. 28, no. 2, pp. 1426-1442, 2021. 2021 3.056
G. Mustafa, M. Usman, L. Yu, M. Sulaiman, A. Shahid et al., “Multilabel classifi­cation of research articles using Word2Vec and identification of similarity threshold,” Scientific reports, vol. 11, no. 1, pp. 1-20, 2021. 2021 4.379
G. Mustafa, M. Usman, M. T. Afzal, A. Shahid, and A. Koubaa, “A Comprehensive Evaluation of Metadata-based Features to Classify Research Paper’s Topics,” IEEE Access, vol. 9, pp. 133 500-133 509, 2021. 2021 3.367
S. Ibrahim, S. Nazir, and S. A. Velastin, “Feature Selection Using Correlation Analysis and Principal Component Analysis for Accurate Breast Cancer Diagnosis,” Journal of Imaging, vol. 7, no. 11, p. 225, 2021. 2021
S. Hayat, A. Rextin, and A. Bilal, “Understanding the usability issues in contact man­agement of illiterate and semi-literate users,” Plos one, vol. 16, no. 12, p. e0259719, 2021. 2021 3.24
S. M. Muzammal, R. K. Murugesan, and N. Z. Jhanjhi, “A comprehensive review on secure routing in internet of things: Mitigation methods and trust-based approaches,” IEEE Internet of Things Journal, vol. 8, no. 6, pp. 4186-4210, 2021 2021 9.471
S. M. Muzammal and R. K. Murugesan, “Enhanced Authentication and Access Con­trol in Internet of Things: A Potential Blockchain-based Method,” International Jour­nal of Grid and Utility Computing, vol. 12, no. 5-6, p. 469, 2021. 2021
M. Nawaz, Z. Mehmood, M. Bilal, A. M. Munshi, M. Rashid, R. M. Yousaf, A. Rehman, and T. Saba, “Single and multiple regions duplication detections in digital images with applications in image forensic,” Journal of Intelligent & Fuzzy Systems, vol. 40, no. 6, pp. 10 351-10 371, 2021. 2021
R. M. Yousaf, H. A. Habib, Z. Mehmood, and M. Bilal, “Image dehazing based on dark channel spatial stimuli gradient model and image morphology,” Journal of Ambient Intelligence and Humanized Computing, vol. 12, no. 8, pp. 8483-8495, 2021. 2021 7.104
S. Obaid, I. Arshad, and M. Usman Abid, “Characterizing Reverse Engineering Prac­tices on Decayed Software Applications,” International Journal Of Computing and Digital System, 2021. 2021
J. Iqbal, S. Hussain, H. AlSalman, M. A. Mosleh, S. Sajid Ullah et al., “A Compu­tational Intelligence Approach for Predicting Medical Insurance Cost,” Mathematical Problems in Engineering, vol. 2021. 2021 1.305
Q. Lin, A. Munir, S. Masood, S. Hussain, M. Naeem, and S. Fazal, “Gene expression profiling utilizing extremely sensitive CDNA arrays and enrichment-based network study of major bone cancer genes,” Journal of research in medical sciences: the official journal of Isfahan University of Medical Sciences, vol. 26, no. 49, p. 34484381, 2021. 2021 1.852
R. Malik and S. Fazal, “Insights into the Dynamic Fluctuations of the Protein HPV16 E1 and Identification of Motifs by Using Elastic Network Modeling,” Protein and Peptide Letters, vol. 28, no. 9, pp. 1061-1070, 2021. 2021 1.89
F. Humayun, F. Khan, N. Fawad, S. Shamas, S. Fazal, A. Khan, A. Ali, A. Farhan, and D. Wei, “Computational Method for Classification of Avian Influenza A Virus Using DNA Sequence Information and Physicochemical Properties,” Frontiers in Ge­netics, vol. 12, p. 10, 2021. 2021 3.258
s. Hussain, A. Fatima, X. X. Fan, and S. I. Malik, “The biological importance of cells secreted exosomes,” Pakistan Journal of Pharmaceutical Sciences, vol. 34, no. 6, pp. 2273-2279, 2021. 2021 0.684
H. Mehdi, S. Malik, H. Ali, and Z. Rasool, “Impacto de la amenaza financiera en el cambio de comportamiento del inversor: el efecto moderador del apoyo social durante la Covid19 en Pakistan,” Apuntes del Cenes, vol. 40, no. 72, pp. 47-70, 2021. 2021
S. Qiu, A. Munir, S. Malik, S. Khan, and A. Hassan, “Identification of differentially expressed genes and pathways crosstalk analysis in Rheumatoid and Osteoarthritis using next-generation sequencing and protein-protein networks,” Saudi Journal of Biological Sciences, vol. 120, no. 3, pp. 4533-4544, 2021. 2021 2.802
S. Hussain, S. Bokhari, X. Fan, and S. Malik, “The role of exosomes derived miRNA in cancer,” Journal of the Pakistan Medical Association, pp. 1-16, 2021. 2021 0.573
M. T. Khan, S. Ali, A. S. Khan, N. Muhammad, F. Khalil, M. Ishfaq, M. Irfan, A. G. Al-Sehemi, S. Muhammad, A. Malik et al., “SARS-CoV-2 Genome from the Khyber Pakhtunkhwa Province of Pakistan,” ACS omega, vol. 6, no. 10, pp. 6588-6599, 2021. 2021 2.87
S. Qiu, A. Munir, S. I. Malik, S. Khan, and A. Hassan, “Identification of Differ­entially Expressed Genes and Pathways Crosstalk Analysis in Rheumatoid Arthritis Using Next-generation Sequencing and Protein-Protein Networks,” Saudi Journal of Biological Sciences, vol. 28, no. 8, pp. 4656-4663, 2021. 2021 2.802
S. Arif, H. Saqib, M. Mubashir, S. I. Malik, A. Mukhtar, S. Saqib, S. Ullah, and P. L. Show, “Comparison of Nigella Sative and Trachyspermum Ammi via Experimental Investigation and Biotechnological Potential,” Chemical Engineering and Processing- Process Intensification, p. 108313, 2021. 2021 3.731
I. Riasat, S. M. Bakhtiar, M. Faheem, A. K. Jaiswal, M. Naeem, R. Khan, A. U. Khan, A. A. K. Khalil, A. Haider, M. Junaid et al., “Application of pan genomics towards the druggability of Clostridium botulinum,” Applied Nanoscience, pp. 1-13, 2021. 2021 3.674
S. M. Bakhtiar, S. E. Z. Bokhari, I. Riasat, and E. Dilshad, “Elucidating the Ge­netic Factors Contributing Towards Susceptibility and Severity of Covid 19,” Current Chinese Science, vol. 1, no. 6, pp. 595-607, 2021. 2021
N. A. Qureshi, S. M. Bakhtiar, M. Faheem, M. Shah, A. Bari, H. M. Mahmood, M. Sohaib, R. A. Mothana, R. Ullah, and S. B. Jamal, “Genome-Based Drug Target Identification in Human Pathogen Streptococcus gallolyticus,” Frontiers in Genetics, vol. 12, p. 303, 2021. 2021 3.258
A. Aftab and S. M. Bakhtiar, “Identification of Functional Variants Associated with Obesity in Pakistani Kindred,” Current Chinese Science, vol. 01, no. 1, pp. 58-68, 2021. 2021
H. Qayyum and S. M. Bakhtiar, “Pathogenomic Studies of Streptococcus sanguinis in Infective Endocarditis,” 2021. 2021
Z. U. H. I. Ali, G. H. Rizwani, U. Zafar, A. A. K. Khalil, Z. Farooq, E. Dilshad, A. Baseer, Z. Khan, and M. R. Saqibullah, “Antimicrobial activities of Dalbergia sissoo DC. and Caralluma tuberculate,” Bioscience Research, vol. 18, no. 2, pp. 1802­1809, 2021. 2021
Dilshad, Erum and Nooruddin, Zainab and Shaukat, Shadab and Munir, Anum and Bakhtiar, Marriam and Ismail, Hammad, “Identification of stress-induced mirna and their targets in solanum lycopersicum,” Current Chinese Science, vol. 01, 2021. 2021
H. Ismail, M. Ijaz, M. Bhatti, H. Liaquat, N. Nawaz, I. Zafar, M. Nassan, R. Waheed, R. Badr, S. Latif, M. S. Malik, E. Dilshad, M. Waheed, and G. Batiha, “Effect of Phoenix dactylifera extracts on anti-inflammatory, anticoagulant, analgesic and antidepressant activities,” Wulfenia, vol. 28, no. 2, pp. 1-33, 2021. 2021 0.512
I. Khan, A. Amin, F. Hussain, Y.-H. Liu, B. Fang, I. Ahmed, and W.-J. Li, “Novi- herbaspirillum aridicola sp. nov., isolated from an arid soil in Pakistan,” International Journal of Systematic and Evolutionary Microbiology, 2021. 2021 2.747
A. Amin, I. Ahmed, N. Khalid, P. Schumann, H.-J. Busse, I. U. Khan, A. Ali, S. Li, and W.-J. Li, “Zafaria cholistanensis gen. nov. sp. nov., a moderately thermotolerant and halotolerant actinobacterium isolated from Cholistan desert soil of Pakistan,” Archives of Microbiology, vol. 203, no. 4, pp. 1717-1729, 2021. 2021 1.884
Z. Afsheen, M. Riaz, and M. Khan, “Current Epidemiological status of Cutaneous Leishmaniasis in different villages of District Malakand KP Province, Pakistan: A Perspective Study,” Fresenius Environmental Bulletin, vol. 30, no. 9, pp. 10 790­10 796, 2021. 2021
M. Khan, F. Khalid, I. Ulhaq, M. Abdullah, S. Khan, S. Ullah, M. Malik, Muhammad, Z. Nasar, M. Salman, and S. Jan, “Highly-sensitive and rapid detection of COVID- 19 in wastewater: a comprehensive review based on graphene field effect transistor biosensor,” Bioscience Research, vol. 18, pp. 01-09, 2021. 2021
N. Habib, M. P. N. Rao, M. Xiao, S. A. Jan, and W.-J. Li, “Genome-based reclassifi­cation of Caldicellulosiruptor lactoaceticus and Caldicellulosiruptor kristjanssonii as later heterotypic synonyms of Caldicellulosiruptor acetigenus,” International Jour­nal of Systematic and Evolutionary Microbiology, vol. 71, no. 8, p. 004927, 2021. 2021 2.747
A. Sardar, A. H. Shah, B. H. Shah, Z. k. Shinwari, S. A. Jan, U. khan, and M. A. Nawaz, “Molecular analyses of selected Tea Genotypes irradiated with Gamma Rays,” Pak. J. Bot, vol. 53, p. 5, 2021. 2021 0.972
M. Khan, M. Salman, S. A. Jan et al., “Biological control of fungal phytopathogens: A comprehensive review based on Bacillus species,” MOJ Biol Med, vol. 6, no. 2, pp. 90-92, 2021. 2021
I. Khan, S. Khan, Y. Zhang, J. Zhou, M. Akhoundian, and S. A. Jan, “CRISPR-Cas technology-based genome editing for modification of salinity stress tolerance responses in rice (Oryza sativa L),” Molecular Biology Reports, vol. 48, no. 4, pp. 3605-3615, 2021. 2021 1.402
S. A. Jan, N. Habib, Z. K. Shinwari, M. Ali, and N. Ali, “The anti-diabetic activities of natural sweetener plant Stevia: an updated review,” SN Applied Sciences, vol. 3, no. 4, pp. 1-6, 2021. 2021 1.35
U. Ahmad, A. Sami, M. Karamat, M. Khalid, M. Naeem, and M. Yousaf, “Synthe­sis and Characterization of Various Porous Hydrogels for In-Vitro and In Vivo Drug (Insulin) Delivery,” Biologia (Lahore, Pakistan), vol. 67, pp. 1-13, 2021. 2021
F. Shahzad, M. Sagheer, and S. Hussain, “Transport of MHD nanofluid in a stratified medium containing gyrotactic microorganisms due to a stretching sheet,” Scientia Iranica, vol. 28, no. 6, pp. 3786-3805, 2021. 2021 1.435
I. Rashid, M. Sagheer, and S. Hussain, “Magnetohydrodynamic nanofluid flow of shaped nanoparticles over a porous stretching wall and slip effect,” Numerical Methods for Partial Differential Equations, 2021. 2021 2.236
T. Nawaz, M. Afzal, and A. Wahab, “Scattering analysis of a flexible trifurcated lined waveguide structure with step-discontinuities,” Physica Scripta, vol. 96, no. 11, p. 115004, 2021. 2021 2.487
H. Bilal and M. Afzal, “On the extension of the mode-matching procedure for model­ing a wave-bearing cavity,” Mathematics and Mechanics of Solids, vol. 27, no. 2, pp. 348-367, 2021. 2021 2.04
M. Afzal, S. Shafique, and A. Wahab, “Analysis of Traveling Waveform of Flexible Waveguides Containing Absorbent Material along Flanged Junctions,” Communi­cations in Nonlinear Science and Numerical Simulation, vol. 97, p. 105737, 2021. 2021 4.115
M. Afzal and J. U. Satti, “The traveling wave formulation of a splitting chamber containing reactive components,” Archive of Applied Mechanics, vol. 91, no. 5, pp. 1959-1980, 2021. 2021 1.374
M. Afzal, T. Nawaz, and R. Nawaz, “Scattering characteristics of planar trifurcated waveguide structure containing multiple discontinuities,” Waves in Random and Com­plex Media, pp. 1-20, 2021. 2021 3.33
S. Shah and S. Hussain, “Slip effect on mixed convective flow and heat transfer of magnetized UCM fluid through a porous medium in consequence of novel heat flux model,” Results in Physics, vol. 20, p. 103749, 2021. 2021
M. Jamal and S. Hussain, “Mixed Convection in Square Enclosure by Considering the Thermal Effect on Cylinder,” Journal of Thermophysics and Heat Transfer, vol. 35, no. 4, pp. 1-14, 2021. 2021 1.711
M. Siddique, A. Kahsif, M. Shoaib, and S. Hussain, “Stability Analysis of the Rhomboidal Restricted Six-Body Problem,” Advances in Astronomy, vol. 2021. 2021
M. A. Qureshi, S. Hussain, and M. A. Sadiq, “Numerical simulations of MHD mixed convection of hybrid nanofluid flow in a horizontal channel with cavity: Impact on heat transfer and hydrodynamic forces,” Case Studies in Thermal Engineering, p. 101321, 2021. 2021 4.724
S. Hussain and H. F. Oztop, “Impact of inclined magnetic field and power law fluid on double diffusive mixed convection in lid-driven curvilinear cavity,” International Communications in Heat and Mass Transfer, vol. 127, p. 105549, 2021. 2021 5.683
S. Hussain, M. Jamal, C. Maatki, K. Ghachem, and L. Kolsi, “MHD mixed convec­tion of Al2O3-Cu-water hybrid nanofluid in a wavy channel with incorporated fixed cylinder,” Journal of Thermal Analysis and Calorimetry, vol. 144, pp. 2219-2223, 2021. 2021 5.683
S. Hussain, S. Shoeibi, and T. Armaghani, “Impact of magnetic field and entropy generation of Casson fluid on double diffusive natural convection in staggered cavity,” International Communications in Heat and Mass Transfer, vol. 127, p. 105520, 2021. 2021
S. Hussain, M. Jamal, and B. Geridonmez, “Impact of fins and inclined magnetic field in double lid-driven cavity with Cu-water nanofluid,” International Journal of Thermal Sciences, vol. 161, p. 106707, 2021. 2021 3.476
S. Hussain, M. Jamal, and B. Geridonmez, “Impact of power law fluid and magnetic field on double diffusive mixed convection in staggered porous cavity considering Du- four and Soret effects,” International Communications in Heat and Mass Transfer, vol. 121, p. 105075, 2021. 2021 3.971
S. Inam, S. Kanwal, and R. Ali, “A New Encryption Scheme Based on Grouping,” Contemporary Mathematics, vol. 2, no. 2, pp. 103-112, 2021. 2021
M. S. Ashraf, R. Ali, and N. Hussain, “Geraghty Type Contractions in Fuzzy b- metric Spaces with Application to Integral Equations,” Filomat, vol. 34, no. 9, pp. 3083-3098, 2021. 2021 0.789
M. Aslam, H. Aydi, S. Batul, and A. Naz, “Coincidence Point Results on Relation Theoretic Fw, Rg-Contractions and Applications,” Journal of Function Spaces, vol. 2021. 2021
H. Aydi, M. Aslam, D.-e.-S. Sagheer, S. Batul, R. Ali, and E. Ameer, “Kannan-Type Contractions on New Extended-Metric Spaces,” Journal of Function Spaces, vol. 2021. 2021
S. Atif, A. Kamran, and S. Shah, “MHD micropolar nanofluid with non-Fourier and non-Fick’s law,” International Communications in Heat and Mass Transfer, vol. 122, p. 105114, 2021. 2021
H. Zada, A. Hassan, and W.-K. Wong, “Do Jumps Matter in Both Equity Market Returns and Integrated Volatility: A Comparison of Asian Developed and Emerging Markets,” Economies, vol. 9, no. 2, p. 92, 2021. 2021
Z. Ghafoor, I. Ahmed, and A. Hassan, “Audit committee characteristics, enterprise risk management and stock price synchronicity,” Managerial Auditing Journal, vol. 37, no. 1, pp. 69-101, 2021. 2021 1.905
M. H. Khan, A. Fraz, A. Hassan, and S. Z. H. Kazmi, “Impact of corruption on bank soundness: the moderating impact of Shari’ah supervision,” Journal of Financial Crime, 2021. 2021
S. Shabbir, S. Waqar, F. Ahmed, and S. Ahmed, “Policy Reforms in Public Institu­tions to Regulate SEZ under CPEC: A Learning Example from Africa,” Studies of Applied Economics, vol. 39, no. 8, 2021. 2021
R. Muhammad, S. Ahmed, and I. M, “Impact of Safety Climate on Project Success,” Journal of Construction in Developing Countries, vol. 26, no. 2, 2021. 2021
S. Ahmed, I. Nawaz, H. Arshad, A. Malik, H. Ali, and Z. Khalid, “Telecom Sector & Disaster Management -A Study of Pakistan’s Cellular Networks during COVID-19,” 2021. 2021
S. Waqar, I. Badshah, F. Ahmad, and S. Ahmed, “The Impact of Special Economic Zones (SEZs) on Economic Growth: Where the Absorption Capacity of Domestic Labor Stands?” ETIKONOMI, vol. 20, pp. 259-274, 2021. 2021
M. Rafique, S. Ahmed, and M. Ismail, “Impact of Safety Climate on Safety Behavior in Construction Projects. Mediating Mechanism and Interacting Effect,” Journal of Construction in Developing Countries, vol. 26, no. 2, pp. 163-181, 2021. 2021
S. Waqar, S. Ahmed, and I. Badshah, “Chinese FDI for infrastructure development in Africa-assessing the impact of cooperation,” Studies of Applied Economics, vol. 39, no. 2, 2021. 2021
D. Fatima, M. B. Abdul Ghaffar, R. Zakariya, L. Muhammad, and A. Sarwar, “Work­place bullying, knowledge hiding and time theft: Evidence from the health care in­stitutions in Pakistan,” Journal of Nursing Management, vol. 29, no. 4, pp. 813-821, 2021. 2021 3.325
L. Muhammad and A. Sarwar, “When and why organizational dehumanization leads to deviant work behaviors in hospitality industry,” International Journal of Hospitality Management, vol. 99, p. 103044, 2021. 2021 9.237
A. Sarwar, L. Muhammad, and M. Sigala, “Unraveling the complex nexus of punitive supervision and deviant work behaviors: findings and implications from hospitality employees in Pakistan,” International Journal of Contemporary Hospitality Manage­ment, vol. 33, no. 5, pp. 1437-1460, 2021. 2021 5.667
A. Sarwar, J. Khan, L. Muhammad, N. Mubarak, and M. Jaafar, “Relationship be­tween Organizational Dehumanization and Nurses’ Deviant Behaviors: A Moderated Mediation Model,” Journal of Nursing Management, vol. 29, no. 5, pp. 1036-1045, 2021. 2021 2.243
N. Mubarak, J. Khan, R. Yasmin, and A. Osmadi, “The impact of a proactive person­ality on innovative work behavior: the role of work engagement and transformational leadership,” Leadership & Organization Development Journal, vol. 42, no. 7, pp. 989­1003, 2021. 2021 3.242
N. Mubarak, S. Safdar, S. Faiz, J. Khan, and M. Jaafar, “Impact of public health education on undue fear of COVID-19 among nurses: The mediating role of psycho­logical capital,” International journal of mental health nursing, vol. 30, no. 2, pp. 544-552, 2021. 2021 2.383
A. Mir, M. Rafique, and N. Mubarak, “Impact of Inclusive Leadership on Project Suc­cess: Testing of a Model in Information Technology Projects,” International Journal of Information Technology Project Management (IJITPM), vol. 12, no. 1, pp. 63-79, 2021. 2021
U. Farooq, J. Ahmed, M. I. Tabash, S. Anagreh, and B. H. Subhani, “Nexus between government green environmental concerns and corporate real investment: Empirical evidence from selected Asian economies,” Journal of Cleaner Production, vol. 314, p. 128089, 2021. 2021 9.297
U. Farooq, J. Ahmed, K. Ashfaq, and M. I. Tabash, “Trade Credit as a Determinant of Firm’s Financial Performance: Moderating Role of Bank Financing,” Global Business Review, p. 09721509211036860, 2021. 2021
J. Ahmed, S. ur Rehman, Z. Zuhaira, and S. Nisar, “The nexus between financial de­velopment and energy consumption: Estimating the role of foreign direct investment, economic growth and urbanization,” Energy & Environment, p. 0958305X211045375, 2021. 2021
M. Sheraz, X. Deyi, J. Ahmed, S. Ullah, and A. Ullah, “Moderating the effect of globalization on financial development, energy consumption, human capital, and car­bon emissions: evidence from G20 countries,” Environmental Science and Pollution Research, vol. 28, no. 26, pp. 35126-35144, 2021. 2021 3.056
J. Ahmed, M. T. Khan, B. Hameed et al., “Hematological profile in patients with chronic kidney disease in Pakistan: a cross-sectional research study,” Journal of The Egyptian Society of Nephrology and Transplantation, vol. 21, no. 1, p. 57, 2021. 2021 2.945
M. I. Khan, S. Khalid, U. Zaman, A. E. Jose, and P. Ferreira, “Green Paradox in Emerging Tourism Supply Chains: Achieving Green Consumption Behavior through Strategic Green Marketing Orientation, Brand Social Responsibility, and Green Im­age,” International Journal of Environmental Research and Public Health, vol. 18, no. 18, 2021. 2021 3.39
J. Khurshid, N. Khurshid, and M. I. Khan, “Impact of Social Identity on Women Entrepreneurial Intention/Behavior: Mediating Role of Attitude Towards Behavior and Moderating Role of Personal Network,” Ilkogretim Online, vol. 43, no. 2, pp. 449-465, 2021. 2021
B. Simonetti, “Impact of financial deepening on exchange rate: spillover evidence from developed and developing economies,” Electronic Journal of Applied Statistical Analysis, vol. 14, no. 2, pp. 425-438, 2021. 2021
S. H. Zaidi and N. T. Bhutta, “Liquidity Synchronization and Asset Valuation in Selected Emerging Asian Economies,” Asian Economic and Financial Review, vol. 11, no. 6, pp. 488-500, 2021. 2021
U. Rubbab, S. Faiz, S. Safdar, and N. Mubarak, “Impact of Thriving at Work on Eustress and Distress: Career Growth as Mediator,” European Journal of Training and Development, 2021. 2021
M. Khan and S. Zeb, “Academic Conversation: A Case to Exemplify the Influence of Non-Verbal Communication on Human Interaction,” NUST Journal of Social Sciences and Humanities, vol. 7, pp. 79-98, 2021. 2021
A. A. Qureshi and N. S. M. R, “Employee Reticence: Development and Validation of its Scale,” Humanities & Social Sciences Reviews, vol. 9, no. 2, pp. 2395-6518, 2021. 2021
M. U. A. Baig and S. M. M. R. Naqvi, “Why trainees evaluate the same trainer differently? Examining a dual-process model of training effectiveness,” European Journal of Training and Development, 2021. 2021
S. Attiq, A. A. Rajput, and M. U. Hannan, “The Deeper the Well the Colder the Water: The Role of Brand Coolness and Love in the Formation of Consumer’s En­gagement with the Lens of S-O-R Approach,” International Journal of Innovation, Creativity & Change, vol. 15, no. 5, pp. 1174-1201, 2021. 2021
S. Safdar, S. Faiz, and N. Mubarak, “A Two-Edged Sword”: Paternalistic Leadership and Nurses Performance: A Moderated Mediation Model,” Frontiers in Psychology, vol. 12, pp. 775 786-775 786, 2021. 2021 2.99
N. Mubarak, J. Khan, S. Safdar, S. Muhammad, and A. Riaz, “Ethical leadership in project-based organizations of Pakistan: the role of psychological empowerment and Islamic work ethics,” Management Research Review, 2021. 2021
S. Zaman, K. Arouj, S. Irfan, and I. Yousaf, “Maladaptive schema modes as the predictor of post-traumatic stress disorder among trauma survivors,” JPMA: Journal of the Pakistan Medical Association, vol. 71, no. 7, pp. 1789-1792, 2021. 2021 0.781
M. Aqeel, J. Abbas, K. H. Shuja, T. Rehna, A. Ziapour, I. Yousaf, and T. Karamat, “The influence of illness perception, anxiety and depression disorders on students’ mental health during COVID-19 outbreak in Pakistan: a web-based cross-sectional survey,” International Journal of Human Rights in Healthcare, 2021. 2021
B. Naeem, M. Aqeel, A. Maqsood, I. Yousaf, and S. Ehsan, “Psychometric properties of the revised Urdu version dyadic adjustment scale for evaluating marital relationship quality between madrassa and non-Madrassa married women,” International Journal of Human Rights in Healthcare, 2021. 2021
M. M. Bhatti, K. H. Shuja, M. Aqeel, Z. Bokhari, S. N. Gulzar, T. Fatima, and M. Sama, “Psychometric development and validation of victim gaslighting question­naire (VGQ): across female sample from Pakistan,” International Journal of Human Rights in Healthcare, 2021. 2021
K. H. Shuja, “A complex model of differences on gender and institution type in aca­demic achievement, happiness and self-esteem among orphan and nonorphan children from Pakistan,” Current Psychology, pp. 1-15, 2021. 2021 4.297
K. Munawar, M. Aqeel, T. Rehna, K. H. Shuja, F. S. Bakrin, and F. R. Choudhry, “Validity and Reliability of the Urdu Version of the McLean Screening Instrument for Borderline Personality Disorder,” Frontiers in Psychology, vol. 12, p. 533526, 2021. 2021 2.99
F. Naz, K. H. Shuja, M. Aqeel, S. Ehsan, A. Noor, D. Butt, H. Gul, U. Rafaqat, A. Khan, and S. Gulzamir, “A hindrance to proper health care: psychometric de­velopment and validation of opiophobia questionnaire among doctors in Pakistan,” International Journal of Human Rights in Healthcare, 2021. 2021
Z. Ahmed, M. Ahmad, M. Murshed, A. I. Vaseer, and D. Kirikkaleli, “The trade-off between energy consumption, economic growth, militarization, and CO2 emissions: does the treadmill of destruction exist in the modern world?” Environmental Science and Pollution Research, pp. 1-14, 2021. 2021 4.223
S. Qureshi, G. Ali, M. Idrees, T. Muhammad, I.-K. Kong, M. Abbas, M. I. A. Shah, S. Ahmad, R. D. Sewell, and S. Ullah, “Selected Thiadiazine-Thione Derivatives Attenuate Neuroinflammation in Chronic Constriction Injury Induced Neuropathy,” Frontiers in Molecular Neuroscience, vol. 14, p. 728128, 2021. 2021 5.639
M. T. Khan, H. Nadeem, A. S. Sheikh, N. S. Malik, M. Rizwan, M. Imran, I. Javed, M. U. Munir, A.-u. Khan, A. Syed et al., “Amino acid derivatives of 2- Mercaptobenzimidazoles suppress cytokines at the site of inflammation and block gastric H/K ATPase,” Pak. J. Pharm. Sci, vol. 34, no. 3, pp. 1157-1163, 2021. 2021 0.684
Z. Malik, M. Abbas, L. T. Al Kury, F. A. Shah, M. Alam, A.-u. Khan, H. Nadeem, S. Alghamdi, M. U. K. Sahibzada, and S. Li, “Thiazolidine Derivatives Attenuate Carrageenan-Induced Inflammatory Pain in Mice,” Drug design, development and therapy, vol. 15, p. 369, 2021. 2021 3.216
S. Akhtar, M. Abbas, K. Naeem, M. Faheem, H. Nadeem, and A. Mehmood, “Benzim­idazole Derivative Ameliorates Opioid-Mediated Tolerance during Anticancer-Induced Neuropathic Pain in Mice,” Anti-Cancer Agents in Medicinal Chemistry (Formerly Current Medicinal Chemistry-Anti-Cancer Agents), vol. 21, no. 3, pp. 365-371, 2021. 2021 2.049
S. Bashir and A. Syed, “Effective Pharmacist led interventional strategies to improves outcomes in hypertensive patients: a narrative review,” Global Journal of Medical Therapeutics, vol. 3, no. 2, 2021. 2021
M. Abbas, A. Inam, E. Tahira, H. Qamar, J. Shakil, and S. Bashir, “Prescribing practices at a secondary healthcare setting of Islamabad, Pakistan: a descriptive cross-sectional study,” Journal of Pharmaceutical Health Services Research, vol. 12, no. 2, pp. 152-158, 2021. 2021
A. Khan, S. Bashir, and S. R. Khan, “Antiurolithic effects of medicinal plants: re­sults of in vivo studies in rat models of calcium oxalate nephrolithiasis—a systematic review,” Urolithiasis, vol. 49, pp. 95-122, 2021. 2021 2.518
S. Bashir and I. Hamid, “Pharmacy students’ perception of learning and engagement in a flipped-classroom of a physiology course,” Innovations in Education and Teaching International, pp. 1-9, 2021. 2021 0.993
M. Sakhi, A. Khan, I. Khan, Z. Iqbal, S. I. Khan, M. A. Khattak, F. Ullah, A. Aman, and M. Alam, “A new sensitive HPLC/UV method for simultaneous determination of paclitaxel, sorafenib and omeprazole in standard solutions and spiked plasma: Appli­cation to in-vitro and in-vivo evaluation of paclitaxel polymeric nano formulations,” Tropical Journal of Pharmaceutical Research, vol. 20, no. 9, pp. 1949-1959, 2021. 2021 0.533
I. Ilahi, F. Khuda, M. U. K. Sahibzada, S. Alghamdi, R. Ullah, A. S. Dablool, M. Alam, A. Khan, A. A. K. Khalil et al., “Synthesis of silver nanoparticles using root extract of Duchesnea indica and assessment of its biological activities,” Arabian Journal of Chemistry, vol. 14, no. 5, p. 103110, 2021. 2021 4.762
F. Khuda, Z. Iqbal, A. Khan, M. U. K. Sahibzada, M. Alam, A. Khusro et ad., “Effect of fresh pomegranate juice on the pharmacokinetic profile of artemether: An open- label, randomized, 2-period crossover study in healthy human volunteers,” Journal of Pharmaceutical and Biomedical Analysis, vol. 203, p. 114179, 2021. 2021 3.209
Q. Khalid, M. Ahmad, M. U. Minhas, F. Batool, N. S. Malik, and M. Rehman, “Novel ^-cyclodextrin nano sponges by chain growth condensation for solubility enhancement of dexibuprofen: Characterization and acute oral toxicity studies,” Journal of Drug Delivery Science and Technology, vol. 61, p. 102089, 2021. 2021 3.981
S. Naeem, K. Barkat, N. S. Malik, and S. Maryam, “PF-127 based vildagliptin loaded polymeric hydrogels prepared by aqueous polymerization technique for treatment of diabetes mellitus,” Journal of Polymer Research, vol. 28, no. 10, pp. 1-16, 2021. 2021 3.097
U. R. Tulain, A. Mahmood, S. Aslam, A. Erum, N. S. Malik, A. Rashid, R. Kausar, and M. S. Alqahtani, “Formulation and Evaluation of Linum usitatissimum Mucilage- Based Nanoparticles for Effective Delivery of Ezetimibe,” International Journal of Nanomedicine, vol. 16, p. 4579, 2021. 2021 6.4
Sumaira, U. R. Tulain, A. Erum, M. A. Hussain, Sidra, N. S. Malik, A. Rashid, R. Kausar, N. Gohar, N. Shahid et al., “Fabrication, Characterization and Toxicity Evaluation of Chemically Cross-linked Polymeric Network for Sustained Delivery of Metoprolol Tartrate,” Designed Monomers and Polymers, vol. 24, no. 1, pp. 351-361, 2021. 2021 2.65
S. Kausar, A. Erum, U. R. Tulain, M. A. Hussain, M. Farid-ul Haq, N. S. Malik, and A. Rashid, “Formulation, In Vitro Evaluation, and Toxicity Studies of A. vulgaris- co-AAm Carrier for Vildagliptin,” Advances in Polymer Technology, vol. 2021. 2021
S. Maryam, K. Barkat, I. Khalid, Y. Mehmood, M. A. Syed, N. S. Malik, and M. Aslam, “Polymeric blends of okra gum/gelatin prepared by aqueous polymeriza­tion technique: their characterization and toxicological evaluation,” Polymer Bulletin, pp. 1-25, 2021. 2021 2.87
N. S. Malik, M. Ahmad, M. S. Alqahtani, A. Mahmood, K. Barkat, M. T. Khan, U. R. Tulain, and A. Rashid, “B-cyclodextrin chitosan-based hydrogels with tunable pH-responsive properties for controlled release of acyclovir: design, characterization, safety, and pharmacokinetic evaluation,” Drug Delivery, vol. 28, no. 1, pp. 1093-1108, 2021. 2021 4.902
N. Rafique, M. Ahmad, M. U. Minhas, S. F. Badshah, N. S. Malik, and K. U. Khan, “Designing gelatin-based swellable hydrogels system for controlled delivery of salbuta- mol sulphate: characterization and toxicity evaluation,” Polymer Bulletin, pp. 1-27, 2021. 2021 2.014
M. Abbas, S. Jabeen, A. Idrees, M. S. Safdar, A. Safdar, M. Siddiqui, I. Hamid, and M. R. Sherazi, “Health-Related Quality of Life Among Senior Citizens in Ter­ritory of Islamabad Pakistan-A Community Based Cross-Sectional Study,” Ageing International, pp. 1-12, 2021. 2021
H. R. Afzal, N. u. H. Khan, K. Sultana, A. Mobashar, A. Lareb, A. Khan, A. Gull, H. Afzaal, M. T. Khan, M. Rizwan et al., “Schiff Bases of Pioglitazone Provide Bet­ter Antidiabetic and Potent Antioxidant Effect in a Streptozotocin-Nicotinamide- Induced Diabetic Rodent Model,” ACS omega, vol. 6, no. 6, pp. 4470-4479, 2021. 2021 3.512
I. Muhammad, S. Q. Abbas, M. Hassan, M. Majid, H.-Z. Jin, S. Bungau et al., “Stress Driven Discovery of Natural Products from Actinobacteria with Anti-Oxidant and Cytotoxic Activities Including Docking and ADMET Properties,” International journal of molecular sciences, vol. 22, no. 21, p. 11432, 2021. 2021 5.923
I. Naz, M. R. Khan, J. A. Zai, R. Batool, S. Maryam, and M. Majid, “Indigofera linifolia ameliorated CCl4 induced endoplasmic reticulum stress in liver of rat,” Journal of Ethnopharmacology, vol. 285, p. 114826, 2021. 2021 4.36
M. S. Iqbal, “Behavior of Pharmacists and Satisfaction of Patients in Coronavirus Disease-19 Pandemic,” Asian Journal of Pharmaceutics (AJP): Free full text articles from Asian J Pharm, vol. 15, no. 1, pp. 151-156, 2021. 2021
2020
U. Ahmed, M. Ahmed, and Q. Memon, “A modified analytical model for AlGaN/GaN FinFETs I–V characteristics,” Semiconductor Science and Technology, vol. 35, no. 3, p. 035002, 2020. 2020 2.361
S. Shafique, K. S. Karimov, M. Abid, M. M. Ahmed, and K. M. Akhmedov, “Carbon nanotubes, orange dye, and graphene powder based multifunctional temperature, pressure, and displacement sensors,” Journal of Materials Science: Materials in Electronics, pp. 1–7, 2020. 2020 2.22
R. Saadia and N. M. Khan, “Single carrier-frequency division multiple access radar: Waveform design and analysis,” IEEE Access, vol. 8, pp. 35 742–35 751, 2020. 2020 4.098
S. B. Javed, A. A. Uppal, R. Samar, and A. I. Bhatti, “Design and implementation of multi-variable h∞ robust control for the underground coal gasification project thar,” Energy, p. 119000, 2020, (IF=6.082). 2020 6.082
M. Kamal Mazhar, M. J. Khan, A. I. Bhatti, and N. Naseer, “A novel roll and pitch estimation approach for a ground vehicle stability improvement using a low cost IMU,” Sensors, vol. 20, no. 2, p. 340, 2020. 2020 3.031
A. Hanif, Q. Ahmed, A. Bhatti, and G. Rizzoni, “A unified control framework for traction machine drive using LPV based field-oriented control,” Journal of Dynamic Systems, Measurement, and Control, vol. 142, no. 10, 2020. 2020 1.466
S. Ullah, Q. Khan, A. Mehmood, and A. I. Bhatti, “Robust backstepping sliding mode control design for a class of underactuated electromechanical nonlinear systems,” Journal of Electrical Engineering & Technology, 2020. 2020 0.715
R. Ara, U. A. Khan, A. I. Bhatti, and B. W. Lee, “A reliable protection scheme for fast dc fault clearance in a VSC-based meshed MTDC grid,” IEEE Access, vol. 8, pp. 88 188–88 199, 2020. 2020 4.098
M. F. Iqbal, Z. Khalid, M. Zahid, and A. Abdullah, “Accuracy improvement in amplitude comparison-based passive direction finding systems by adaptive squint selection,” IET Radar, Sonar & Navigation, vol. 14, no. 5, pp. 662–668, 2020. 2020 2.015
Z. Masood, R. Samar, and M. A. Z. Raja, “Design of fractional order epidemic model for future generation tiny hardware implants,” Future Generation Computer Systems, vol. 106, pp. 43–54, 2020. 2020 5.678
M. Shafiq, I. A. Taj, M. Ghafoor, S. A. Tariq, A. Abbas, and A. Y. Zomaya, “Accelerating fingerprint identification using FPGA for large- scale applications,” Journal of Parallel and Distributed Computing, 2020. 2020 1.819
M. Ghafoor, S. A. Tariq, I. Taj, N. Jafri, and T. Zia, “Robust palm print identification using efficient enhancement and two-stage matching technique,” IET Image Processing, vol. 14, no. 11, pp. 2333–2342, 2020. 2020 2.004
U. Rafique, M. A. Walha, S. U. Din, and H. Khalil, “Compact CPW-fed super wideband planar elliptical antenna,” International Journal of Microwave and Wireless Technologies, 2020. 2020 0.939
N. Zahid, J. Jiang, U. Rafique, and D. Eric, “A modified planar square-loop antenna for electronic article surveillance RFID applications,” Journal of Communications Technology and Electronics, 2020. 2020 0.483
M. Tahir, I. A. Taj, P. A. Assuncao, and M. Asif, “Low complexity high efficiency coding of light fields using ensemble classifiers,” Journal of Visual Communication and Image Representation, vol. 66, p. 102742, 2020. 2020 2.479
M. Hassan and I. Hassan, “Improving ANN-based streamflow estimation models for the upper indus basin using satellite-derived snow cover area,” Acta Geophysica, pp. 1–11, 2020. 2020 1.395
S. Janjua, I. Hassan, M. Zarghami, and S. Islam, “Addressing supply-demand gap in shared rivers using water diplomacy framework: utility of game theory in the indus river within pakistan,” Water Policy, 2020. 2020 1.093
S. Janjua, I. Hassan, and S. Islam, “Role and relevance of three enabling conditions to resolve inter-provincial water conflicts in the indus basin within pakistan,” Water Policy, 2020. 2020 1.093
S. Janjua and I. Hassan, “Fuzzy AHP-topsis multi-criteria decision analysis applied to the indus reservoir system in pakistan,” Water Supply, 2020. 2020 0.9
S. Janjua and I. Hassan, “Transboundary water allocation in critical scarcity conditions: a stochastic bankruptcy approach,” Journal of Water Supply: Research and Technology-AQUA, vol. 69, no. 3, pp. 224–237, 2020. 2020 2.496
S. Janjua and I. Hassan, “Use of bankruptcy methods for resolving interprovincial water conflicts over transboundary river: Case study of indus river in pakistan,” River Research and Applications, 2020. 2020 1.954
H. U. Din, I. Waris, O. B. Rizwan, and M. Ali, “Energy dissipation in 3d structure having multiple uplifts during dynamic loading,” Arabian Journal for Science and Engineering, 2020 2020 1.711
M. Khan and M. Ali, “Optimization of concrete stiffeners for confined brick masonry structures,” Journal of Building Engineering, p. 101689, 2020. 2020 3.379
S. Ahmed and M. Ali, “Use of agriculture waste as short discrete fibers and glass-fiber- reinforced-polymer rebars in concrete walls for enhancing impact resistance,” Journal of Cleaner Production, p. 122211, 2020. 2020 7.246
M. Khan, M. Cao, and M. Ali, “Cracking behavior and constitutive modelling of hybrid fibre reinforced concrete,” Journal of Building Engineering, vol. 30, p. 101272, 2020. 2020 2.378
M. Khan, A. Rehman, and M. Ali, “Efficiency of silica-fume content in plain and natural fiber reinforced concrete for concrete road,” Construction and Building Materials, vol. 244, p. 118382, 2020. 2020 4.046
A. A. Khan, M. U. Zaheer, S. Asghar, and S. S. S. Gardezi, “Green rating assessment of a residential building in pakistan using leed’s,” Open Journal of Science and Technology, vol. 3, no. 2, pp. 126–139, 2020. 2020
R. Sabir, M. M. Khan, N. A. Sheikh, I. U. Ahad, and D. Brabazon, “Assessment of thermo-hydraulic performance of inward dimpled tubes with variation in angular orientations,” Applied Thermal Engineering, vol. 170, p. 115040, 2020. 2020 4.026
L. A. Khan and M. M. Khan, “Role of orientation of fins in performance enhancement of a latent thermal energy storage unit,” Applied Thermal Engineering, p. 115408, 2020. 2020 4.026
M. A. Khan, S. H. I. Jaffery, M. Khan, M. Younas, S. I. Butt, R. Ahmad, and S. S. Warsi, “Multi-objective optimization of turning titanium-based alloy ti-6al-4v under dry, wet, and cryogenic conditions using gray relational analysis (GRA),” The International Journal of Advanced Manufacturing Technology, vol. 106, no. 9-10, pp. 3897– 3911, 2020. 2020 2.496
M. W. Ahmed and M. T. Afzal, “Flag-PDFE: Features oriented metadata extraction framework for scientific publications,” IEEE Access, 2020. 2020 4.098
S. Maqsood, M. A. Islam, M. T. Afzal, and N. Masood, “A comprehensive author ranking evaluation of network and bibliographic indices,” Malaysian Journal of Library & Information Science, vol. 25, no. 1, pp. 31–45, 2020. 2020
S. Nazir, M. Asif, S. Ahmad, F. Bukhari, M. T. Afzal, and H. Aljuaid, “Important citation identification by exploiting content and section-wise in-text citation count,” PloS one, vol. 15, no. 3, p. e0228885, 2020. 2020 2.776
U. A. Chauhan, M. T. Afzal, A. Shahid, M. Abdar, M. E. Basiri, and X. Zhou, “A comprehensive analysis of adverb types for mining user sentiments on amazon product reviews,” World Wide Web, pp. 1–19, 2020. 2020 1.77
N. Ikram, M. Abdul Qadir, and M. T. Afzal, “SimExact – Anefficient method to compute function similarity between proteins using gene ontology,” Current Bioinformatics, vol. 15, no. 4, pp. 318–327, 2020. 2020 1.189
Q. u. Zaman, A. Nadeem, and M. A. Sindhu, “Formalizing the use case model: A model-based approach,” Plos one, vol. 15, no. 4, p. e0231534, 2020. 2020 2.776
A. A. Toor, M. Usman, F. Younas, A. C. M Fong, S. A. Khan, and S. Fong, “Mining massive e-health data streams for IOMT enabled healthcare systems,” Sensors, vol. 20, no. 7, p. 2131, 2020. 2020 3.031
] M. S. I. Malik, “Predicting users’ review helpfulness: the role of significant review and reviewer characteristics,” Soft Computing, pp. 1–16, 2020. 2020 2.784
S. Hussain, Y.-J. Xie, D. Li, S. I. Malik, J.-c. Hou, E. L.-H. Leung, and X.-X. Fan, “Current strategies against covid-19,” Chinese medicine, vol. 15, no. 1, pp. 1–12, 2020. 2020 2.96
M. T. Khan, M. T. Zeb, H. Ahsan, A. Ahmed, A. Ali, K. Akhtar, S. I. Malik, Z. Cui, S. Ali, A. S. Khan et al., “Sars-cov-2 nucleocapsid and nsp3 binding: an in silico study,” Archives of Microbiology, pp. 1–8, 2020. 2020 1.884
M. T. Khan, A. C. Kaushik, Q. ul ain Rana, S. I. Malik, A. S. Khan, D.-Q. Wei, W. Sajjad, S. Ahmad, S. Ali, M. Irfan et al., “Characterization and synthetic biology of lipase from bacillus amyloliquefaciens strain,” Archives of Microbiology, pp. 1–10, 2020. 2020 1.642
M. T. Khan, S. Ali, M. T. Zeb, A. C. Kaushik, S. I. Malik, and D.-Q. Wei, “Gibbs free energy calculation of mutation in PNCA and RPSA associated with pyrazinamide resistance,” Frontiers in Molecular Biosciences, vol. 7, 2020. 2020 3.565
A. Amin, I. Ahmed, N. Khalid, I. U. Khan, A. Ali, S. M. Dahlawi, and W.-J. Li, “Insights on comparative bacterial diversity between different arid zones of cholistan desert, Pakistan,” 3 Biotech, vol. 10, no. 5, 2020. 2020 1.786
H. Mehfooz, A. Saeed, M. Faisal, F. A. Larik, U. Muqadar, S. Khatoon, P. A. Channar, H. Ismail, S. Bilquees, S. Rashid et al., “Facile one-pot synthesis, butyrylcholinesterase and α-glucosidase inhibitory activities, structure–activity relationship, molecular docking and DNA–drug binding analysis of Meldrum’s acid derivatives,” Research on Chemical Intermediates, pp. 1–20, 2020. 2020 2.064
S. Latif, H. Ismail, M. R. Khan, A. A. Rahim, R. Mehboob, E. Dilshad, M. Sajid, S. I. Haider, S. Anwaar, and M. N. Majeed, “Pharmacological evaluation of acacia modesta bark for antipyretic, anti-inflammatory, analgesic, antidepressant and anticoagulant activities in sprague dawley rats.” Pakistan Journal of Pharmaceutical Sciences, vol. 33, no. 3, 2020. 2020 0.596
E. Dilshad, H. Ismail, M. A. Khan, R. M. Cusido, and B. Mirza, “Metabolite profiling of artemisia carvifolia buch transgenic plants and estimation of their anticancer and antidiabetic potential,” Biocatalysis and Agricultural Biotechnology, vol. 24, p. 101539, 2020. 2020
T. Zaheer, M. Waseem, W. Waqar, H. A. Dar, M. Shehroz, K. Naz, Z. Ishaq, T. Ahmad, N. Ullah, S. M. Bakhtiar et al., “Anti-covid-19 multi-epitope vaccine designs employing global viral genome sequences,” PeerJ, vol. 8, p. e9541, 2020. 2020 2.379
S. Hussain, T. Armaghani, and M. Jamal, “Magneto convection and entropy analysis in t-shaped porous enclosure using finite element method,” Journal of Thermophysics and Heat Transfer, vol. 34, no. 1, pp. 203–214, 2020. 2020 1.051
M. Zia and R. Ali, “A multi recipient aggregate signcryption scheme based on elliptic curve,” Wireless Personal Communications, pp. 1–16, 2020. 2020 0.929
M. S. Ashraf, R. Ali, and N. Hussain, “New fuzzy fixed point results in generalized fuzzy metric spaces with application to integral equations,” IEEE Access, vol. 8, pp. 91 653–91 660, 2020. 2020 4.098
M. Zia and R. Ali, “Cryptanalysis and improvement of a blind multi-document signcryption scheme,” Cryptologia, pp. 1–15, 2020. 2020 0.417
T. S. Ali and R. Ali, “A new chaos based color image encryption algorithm using permutation substitution and boolean operation,” Multimedia Tools and Applications; Springer: Berlin/Heidelberg, Germany, pp. 1–21, 2020. 2020 2.101
T. S. Ali and R. Ali, “A novel medical image signcryption scheme using TLTS and henon chaotic map,” IEEE Access, vol. 8, pp. 71 974–71 992, 2020. 2020 4.098
M. Afzal, J. U. Satti, and R. Nawaz, “Scattering characteristics of non-planar trifurcated waveguides,” Meccanica, pp. 1–12, 2020. 2020 2.316
S. Shafique, M. Afzal, and R. Nawaz, “On the attenuation of fluid–structure coupled modes in a non-planar waveguide,” Mathematics and Mechanics of Solids, p. 1081286520911443, 2020. 2020 1.719
M. Afzal and S. Shafique, “Attenuation analysis of flexural modes with absorbent lined flanges and different edge conditions,” The Journal of the Acoustical Society of America, vol. 148, no. 1, pp. 85–99, 2020. 2020 1.819
M. Anwar, R. A. Dur-e Shehwar Sagheer, and N. Hussain, “Wardowski type α-f-contractive approach for nonself multivalued mappings,” University Politehnica of Bucharest Scientific Bulletin-Series a-applied Mathematics and Physics, vol. 82, no. 1, pp. 69–78, 2020. 2020 0.478
M. H. Khan, A. Fraz, A. Hassan, and P. Abedifar, “Female board representation, risk-taking and performance: Evidence from dual banking systems,” Finance Research Letters, p. 101541, 2020. 2020 3.527
S. Saeed and I. Hassan, “Liquidity commonality risk and asset pricing in emerging and developed stock,” NUML International Journal of Business & Management, vol. 19, no. 2, pp. 92–110, 2020. 2020
H. Raza and A. Hassan “The impact of downside risk on expected return: Evidence from emerging economies, Lahore Journal of Business, vol. 8, no. 1, pp. 91–106 2020. 2020
S. Ijaz, A. Hassan, A. Tarazi, and A. Fraz, “Linking bank competition, financial stability, and economic growth,” Journal of Business Economics and Management, vol. 21, no. 1, pp. 200–221, 2020. 2020 1.855
H. Raza, A. Hassan, and F. Gul, “Does pakistan stock exchange pay to bet against the beta?” CITY University Research Journal, vol. 10, no. 1, 2020. 2020
R. M. Yasin, S. Bashir, M. V. Abeele, and J. Bartels, “Supervisor phubbing phenomenon in organizations: Determinants and impacts,” International Journal of Business Communication, p. 2329488420907120, 2020. 2020 1.293
S. Azeem, M. A. Zafar, and A. K. Khan, “The grapes are sour: An envier’s attributional perspective of coworker impression management,” Journal of Management & Organization, pp. 1–17, 2020. 2020 1.021
A. Zahra, A. Zulzar, and S. Aziz, “The effect of atmospheric harmony on re patron- age intentions among small consumers: the mediating role of hedonic value and the moderating role of past experience,” Journal of Consumer Marketing, 2020. 2020
A. Hashmi, S. Ahmed, and I. Hassan, “Optimizing pakistan’s water economy using hydro-economic modeling,” Journal of Business & Economics, vol. 11, no. 2, pp. 111– 124, 2020. 2020
S. Ahmed, K. Munir, and H. Nadeem, “Relationship between foreign direct investment & financial market development-evidence from south asian markets”, Journal of Independent Studies and Research, 2020. 2020
S. Aziz, Z. Afaq, L. Muhammad, and B. Khan, “The role of media, word of mouth, and subjective norms in determining attitude and intentions to purchase family takaful schemes,” Journal of Islamic Business and Management, vol. 10, no. 1, pp. 111–131, 2020. 2020
U. Farooq, J. Ahmed, and S. Khan, “Do the macroeconomic factors influence the firm’s investment decisions? a generalized method of moments (GMM) approach,” International Journal of Finance & Economics, 2020. 2020 0.943
R. Anwar and J. A. Malik, “When does corporate social responsibility disclosure affect investment efficiency? a new answer to an old question,” SAGE Open, vol. 10, no. 2, p. 2158244020931121, 2020. 2020 0.715
R. Anwar and J. Ahmed, “Evaluating the moderating impact of family on the relation- ship between board independence and corporate social responsibility using propensity score matching,” South African Journal of Business Management, vol. 51, no. 1, p. 10, 2020. 2020 0.439
J. Khan, M. Jaafar, B. Javed, N. Mubarak, and T. Saudagar, “Does inclusive leadership affect project success? the mediating role of perceived psychological empowerment and psychological safety,” International Journal of Managing Projects in Business, 2020. 2020 1.989
M. Khan and N. Aslam, “Perception of god’s attributes for mental comfort in stressful life events,” Foundation University Journal of Psychology, vol. 4, no. 2, pp. 37–45, 2020. 2020
M. Khan and S. Zeb, “An adaptive approach towards covid-19: Managing psycho- social crisis,” Foundation University Journal of Psychology, vol. 4, no. 2, pp. 11–15, 2020. 2020
M. Khan and N. Aslam, “Prevalence of caffeine intake among cigarette smokers: Directing caffeine use disorder among pakistani population,” Pakistan Journal of Medical Research, vol. 59, no. 1, pp. 15–21, 2020. 2020
U. Ullah, H. Badshah, Z. Malik, Z. Uddin, M. Alam, S. Sarwar, A. Aman, A.-u. Khan, and F. A. Shah, “Hepatoprotective effects of melatonin and celecoxib against ethanol- induced hepatotoxicity in rats,” Immunopharmacology and Immunotoxicology, pp. 1–9, 2020. 2020 2.086
A. Khan, Z. Iqbal, S. Nazir, M. Alam, and A. Naz, “Evaluation of emesis control with orally disintegrating tablets and conventional tablets of domperidone: a randomized trial,” LATIN American Journal of Pharmacy, vol. 39, no. 1, pp. 29–37, 2020. 2020 0.29
M. T. Khan, H. Nadeem, A.-u. Khan, M. Abbas, M. Arif, N. S. Malik, Z. Malik, and I. Javed, “Amino acid conjugates of 2-mercaptobenzimidazole provide better anti- inflammatory pharmacology and improved toxicity profile,” Drug Development Research, 2020. 2020 1.902
A. Mohsin Alvi, L. Tariq Al Kury, M. Umar Ijaz, F. Ali Shah, M. Tariq Khan, A. Sadiq Sheikh, H. Nadeem, A.-u. Khan, A. Zeb, and S. Li, “Post-treatment of synthetic polyphenolic 1, 3, 4 oxadiazole compound a3, attenuated ischemic stroke- induced neuroinflammation and neurodegeneration,” Biomolecules, vol. 10, no. 6, p. 816, 2020. 2020 4.694
S. Iqbal, F. A. Shah, K. Naeem, H. Nadeem, S. Sarwar, Z. Ashraf, M. Imran, T. Khan, T. Anwar, and S. Li, “Succinamide derivatives ameliorate neuroinflammation and oxidative stress in scopolamine-induced neurodegeneration,” Biomolecules, vol. 10, no. 3, p. 443, 2020. 2020 4.694
Q. Khalid, M. Ahmad, M. U. Minhas, F. Batool, N. S. Malik, and M. Rehman, “Novel β-cyclodextrin nanosponges by chain growth condensation for solubility enhancement of dexibuprofen: characterization and acute oral toxicity studies,” Journal of Drug Delivery Science and Technology, p. 102089, 2020 2020 2.734
Y. Mehmood, U. Farooq, H. Yousaf, H. Riaz, R. K. Mahmood, A. Nawaz, Z. Abid, M. Gondal, N. S. Malik, K. Barkat et al., “Antiviral activity of green silver nanoparticles produced using aqueous buds extract of syzygium aromaticum,” Pak. J. Pharm. Sci, vol. 33, no. 2, pp. 839–845, 2020. 2020 0.596
] N. S. Malik, M. Ahmad, M. U. Minhas, R. Tulain, I. Khalid, K. Barkat, and A. Rashid, “Toxicological evaluation of xanthan gum based hydrogel formulation in wistar rats using single dose study,” Acta Poloniae Pharmaceutica, vol. 77, no. 2, pp. 353–360, 2020. 2020 0.447
N. S. Malik, M. Ahmad, M. U. Minhas, R. Tulain, K. Barkat, I. Khalid, and Q. Khalid, “Chitosan/xanthan gum based hydrogels as potential carrier for an antiviral drug: Fabrication, characterization, and safety evaluation,” Frontiers in Chemistry, vol. 8, p. 50, 2020. 2020 3.782
N. A. Salam, M. A. Naeem, N. S. Malik, M. Riaz, F. Aslam et al., “Exploring the potential of tianeptine matrix tablets: Synthesis, physicochemical characterization and acute toxicity studies.” Pakistan Journal of Pharmaceutical Sciences, vol. 33, no. 1 (Supplementary), pp. 269–279, 2020. 2020 0.596
N. U. Rehman, M. Abbas, M. Al-Rashida, A. Tokhi, M. A. Arshid, M. S. Khan, I. Ahmad, and K. Rauf, “Effects of 4-fluoro-n-(4-sulfamoylbenzyl) benzene sulfonamide on acquisition and expression of nicotine-induced behavioral sensitization and striatal adenosine levels,” Drug Design, Development and Therapy, vol. 14, p. 3777, 2020. 2020 3.216
N. U. Rehman, K. Esmaeilpour, S. Joushi, M. Abbas, M. al Rashida, K. Rauf, and Y. Masoumi Ardakani, “Effect of 4-fluoro-n-(4-sulfamoylbenzyl) benzene sulfonamide on cognitive deficits and hippocampal plasticity during nicotine withdrawal in rats,” Biomedicine & Pharmacotherapy, vol. 131, p. 110783, 2020. 2020 4.545
S. Akhtar, M. Abbas, K. Naeem, M. Faheem, H. Nadeem, and A. Mehmood, “Benz- imidazole derivative ameliorates opioid-mediated tolerance during anticancer-induced neuropathic pain in mice,” Anti-cancer agents in medicinal chemistry. 2020
M. Sona Khan, W. Trenet, N. Xing, B. Sibley, M. Abbas, M. al Rashida, K. Rauf, and C. D. Mandyam, “A novel sulfonamide, 4-fs, reduces ethanol drinking and physical withdrawal associated with ethanol dependence,” International Journal of Molecular Sciences, vol. 21, no. 12, p. 4411, 2020. 2020 4.183
M. Imran, L. T. Al Kury, H. Nadeem, F. A. Shah, M. Abbas, S. Naz, A.-u. Khan, and S. Li, “Benzimidazole containing acetamide derivatives attenuate neuroinflammation and oxidative stress in ethanol-induced neurodegeneration,” Biomolecules, vol. 10, no. 1, p. 108, 2020. 2020 4.694
S. Bashir, A.-u. Khan, M. Mahmood, M. Abbas, S. Akhtar, A. W. Khan, M. T. Aqeel, M. Akhlaq, and H. Ahmad, “Students’ perception of the learning environment in private-sector pharmacy institutes of pakistan,” Pharmacy Education, vol. 20, pp. 191–197, 2020. 2020
A. H. Palla, A.-u.-H. Gilani, S. Bashir, and N. Ur Rehman, “Multiple mechanisms of flaxseed: Effectiveness in inflammatory bowel disease,” Evidence-Based Complementary and Alternative Medicine, vol. 2020, 2020. 2020 1.813
F. Khurshid, S. Bashir, and B. Noushad, “Prescription writing through the lens of the threshold concept framework: a narrative review,” Res Dev, vol. 9, no. 11, p. 11, 2020. 2020
B. Nasir, M. W. Baig, M. Majid, S. M. Ali, M. Z. I. Khan, S. T. B. Kazmi, and I.-u. Haq, “Preclinical anticancer studies on the ethyl acetate leaf extracts of datura stramonium and datura inoxia,” BMC Complementary Medicine and Therapies, vol. 20, no. 1, pp. 1–23, 2020. 2020
2019
S. U. Rehman, U. F. Ahmed, M. M. Ahmed, and U. Rafique, “An improved space charge distribution analytical model to assess field-effect transistor’s intrinsic capaci­tors,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 6, pp. 4502-4517, 2019. 2019 0.625
U. F. Ahmed, M. M. Ahmed, and Q. D. Memon, “A non-linear compact model for FINFETs output characteristics,” IET Circuits, Devices & Systems, vol. 13, no. 8, pp. 1249-1254, 2019. 2019 1.277
M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “An improved temperature dependent analytical model to predict AlGaN/GaN high electron mobility transistors ac characteristics,” International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 32, no. 6, p. e2648, 2019. 2019 0.795
M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “Simulation and com­parative analysis of the DC characteristics of submicron GaN HEMTs for use in CAD software,” Journal of Computational Electronics, vol. 18, no. 2, pp. 482-491, 2019. 2019 1.637
U. F. Ahmed and M. M. Ahmed, “An analytical model to assess dc characteristics of independent gate Si FinFETs,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 4, pp. 2456-2465, 2019. 2019 0.625
Z. Ahmed and M. M. Ahmed, “Sidelobe reduction and gain enhancement in higher order TM30 and tm70 mode rectangular patch antennas via partial notch loading,” IET Microwaves, Antennas & Propagation, vol. 13, no. 12, pp. 1955-1962, 2019. 2019 2.036
U. Ahmed and M. Ahmed, “A 3-d potential model to assess dc characteristics of Si FinFETs,” Journal of Computational Electronics, vol. 18, no. 3, pp. 893-905, 2019. 2019 1.637
Z. Ahmed, M. M. Ahmed, M. B. Ihsan, A. A. Chaudhary, and J. K. Arif, “Novel dual band patch antenna with gap coupled composite right/left-handed transmission line,” International Journal of Microwave and Wireless Technologies, vol. 11, no. 1, pp. 87-93, 2019. 2019 0.745
S. Fatima, U. Rafique, U. F. Ahmed, and M. M. Ahmed, “A global parameters extrac­tion technique to model organic field effect transistors output characteristics,” Solid- State Electronics, vol. 152, pp. 81-92, 2019. 2019 1.66
S. U. Rehman, U. F. Ahmed, M. M. Ahmed, and M. N. Khan, “Temperature dependent analytical DC Model for Wide Bandgap MESFETs,” IEEE Access, vol. 7, pp. 49 702­49 711, 2019. 2019 3.557
H. Khalil, M. M. Ahmed, and U. Rafique, “Nose-cone conformal substrate-integrated waveguide slot array antenna for x-band radar applications,” International Journal of Antennas and Propagation, vol. 2019, 2019. 2019 1.347
I. Ullah and M. Ashraf, “Comparison of synchronization techniques under distorted grid conditions,” IEEE Access, vol. 7, pp. 101345-101354, 2019. 2019 4.09
I. Ullah and M. Ashraf, “A novel filter extracted equivalent control based fixed fre­quency sliding mode approach for power electronic converters conditions,” Energies, vol. 12, no. 5, pp. 853-866, 2019. 2019 2.707
R. Irfan, H. ur Rasheed, W. A. Toor, and M. Ashraf, “Performance analysis of adaptive algorithms for space-time adaptive processor (STAP) in phased array radar,” The Journal of Engineering, vol. 2019, no. 19, pp. 6313-6317, 2019. 2019
I. Ullah and M. Ashraf, “Sliding mode control for performance improvement of shunt active power filter,” SN Applied Sciences, vol. 1, no. 6, p. 531, 2019. 2019
A. R. Yasin, M. Ashraf, and A. I. Bhatti, “A novel Filter Extracted Equivalent Con­trol based Fixed Frequency Sliding Mode Approach for power electronic converters,” Energies, vol. 12, no. 5, p. 853, 2019. 2019 2.676
A. R. Yasin, M. Ashraf, A. I. Bhatti, and A. A. Uppal, “Fixed frequency sliding mode control of renewable energy resources in DC micro grid,” Asian Journal of Control, vol. 21, no. 4, pp. 2074-2086, 2019. 2019 1.528
S. B. Javed, A. A. Uppal, A. I. Bhatti, and R. Samar, “Prediction and parametric analysis of cavity growth for the underground coal gasification project thar,” Energy, vol. 172, pp. 1277-1290, 2019. 2019 5.537
G. Murtaza, A. I. Bhatti, and Y. A. Butt, “Unified FDI and FTC scheme for air path actuators of a diesel engine using ISM extended with adaptive part,” Asian Journal of Control, vol. 22, no. 1, pp. 117-129, 2019. 2019 2.005
R. Anjum, A. I. Bhatti, A. Yar, and Q. Ahmed, “Cyclic torque imbalance detection in gasoline engines using a uniform second-order sliding mode observer,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 233, no. 13, pp. 3515-3527, 2019. 2019 1.414.
M. Tahir, I. A. Taj, P. A. Assuncao, and M. Asif, “Fast video encoding based on random forests,” Journal of Real-Time Image Processing, pp. 1-21, 2019. 2019 1.574
H. Raza and N. M. Khan, “Tracking performance of robust RLS algorithm for MIMO channel estimation,” Wireless Personal Communications, pp. 1-15, 2019. 2019 0.929
K. Shehzad, N. M. Khan, and J. Ahmed, “Impact of frequency reuse and flexible cell association on the performance of dense heterogeneous cellular networks using dual slope path loss model,” IEEE Access, vol. 7, pp. 166 214-166 234, 2019. 2019 4.098
M. Muzzammil, T. Ahmad, N. M. Khan, and L. Wan, “Low cost, faster detection of cognitive radio through filter banks with bandpass sampling,” Physical Communica­tion, vol. 33, pp. 1-8, 2019. 2019 1.451
S. M. Gulfam, S. Junaid Nawaz, A. Baltzis, A. Ahmed, and N. M. Khan, “Charac­terization of angular spread and fading statistics of mmWave range (28 GHz and 38 GHz) outdoor and indoor radio propagation channels”,” Technologies (MDPI), vol. 7, pp. 1-9, 2019. 2019
M. Ghafoor, S. A. Tariq, T. Zia, I. A. Taj, A. Abbas, A. Hassan, and A. Y. Zomaya, “Fingerprint identification with shallow multifeatured view classifier,” IEEE Transac­tions on Cybernetics, 2019. 2019 10.387
M. Tahir, I. A. Taj, P. A. Assuncao, and M. Asif, “Low complexity high efficiency coding of light fields using ensemble classifiers,” Journal of Visual Communication and Image Representation, vol. 66, p. 102742, 2019. 2019 2.259
N. I. Ratyal, I. A. Taj, M. Sajid, N. Ali, A. Mahmood, and S. Razzaq, “Three-dimensional face recognition using variance-based registration and subject-specific descriptors,” International Journal of Advanced Robotic Systems, vol. 16, no. 3, p. 1729881419851716, 2019. 2019 1.223
N. Ratyal, I. A. Taj, M. Sajid, A. Mahmood, S. Razzaq, S. H. Dar, N. Ali, M. Usman, M. J. A. Baig, and U. Mussadiq, “Deeply learned pose invariant image analysis with applications in 3d face recognition,” Mathematical Problems in Engineering, vol. 2019, 2019. 2019 1.179
T. Zia, M. Ghafoor, S. A. Tariq, and I. A. Taj, “Robust fingerprint classification with bayesian convolutional networks,” IET Image Processing, vol. 13, no. 8, pp. 1280-1288, 2019. 2019 2.004
M. F. Iqbal, M. Zahid, D. Habib, and L. K. John, “Efficient prediction of network traffic for real-time applications,” Journal of Computer Networks and Communications, vol. 2019, 2019. 2019
Z. Masood, R. Samar, and M. A. Z. Raja, “Design of a mathematical model for the stuxnet virus in a network of critical control infrastructure,” Computers & Security, vol. 87, p. 101565, 2019. 2019 3.476
Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of epidemic computer virus model with effect of quarantine in the presence of immunity,” Fundamenta Informaticae, vol. 161, no. 3, pp. 249-273, 2019. 2019 0.725
S. M. Shah, R. Samar, and M. A. Z. Raja, “Fractional-order algorithms for tracking Rayleigh fading channels,” Nonlinear Dynamics, vol. 92, no. 3, pp. 12 493-1259, 2019. 2019 4.604
M. R. Mufti, H. Afzal, F. Ur-Rehman, W. Aslam, and M. I. Qureshi, “Transmission projective synchronization of multiple non-identical coupled chaotic systems using slid­ing mode control,” IEEE Access, vol. 7, pp. 17847-17 861, 2019. 2019 4.098
S. Ud Din, F. Ur Rehman, and Q. Khan, “Smooth super-twisting sliding mode control for the class of underactuated systems,” PloS one, vol. 13, no. 10, p. e0203667, 2018. 2019 2.776
F. Ur Rahman, Q. Khan, and R. Akmeliawati, “Synchronization and anti-synchronization protocol design of chaotic nonlinear gyros: an adaptive integral sliding mode approach,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 1, pp. 675-684, 2019. 2019 0.625
W. Abbasi, F. Ur Rehman, I. Shah, and A. Rauf, “Stabilizing control algorithm for non- holonomic wheeled mobile robots using adaptive integral sliding mode,” International Journal of Robotics and Automation, vol. 34, no. 2, 2019. 2019 0.754
M. S. Iqbal, “Real-time fault detection system for large scale grid-integrated solar photovoltaic power plants,” Ph.D. dissertation, Department of Electrical Engineering, Capital University of Science and …, 2019. 2019
T. Irshad, “Comparative analysis of conventional VSC and MMC on the basis of output power quality and control performance,” Ph.D. dissertation, Department of Electrical Engineering, Capital University of Science and ., 2019. 2019
K. A. Khaliq, O. Chughtai, A. Shahwani, A. Qayyum, and J. Pannek, “An emergency response system: Construction, validation, and experiments for disaster management in a vehicular environment,” Sensors vol. 19, no. 5, p. 1150, 2019. 2019 3.275
K. A. Khaliq, O. Chughtai, A. Shahwani, A. Qayyum, and J. Pannek, “Road accidents detection, data collection and data analysis using v2x communication and edge/cloud computing,” Electronics, vol. 8, no. 8, p. 896, 2019. 2019 2.412
I. Hassan and I. Waqar, “Reducing water demands by adopting harvesting and recycling techniques in Pakistan,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 14, no. 4, pp. 79-88, 2019. 2019
S. S. S. Gardezi and N. Shafiq, “Operational carbon footprint prediction model for conventional tropical housing: a Malaysian prospective,” International Journal of En­vironmental Science and Technology, vol. 16, no. 12, pp. 7817-7826, 2019. 2019 2.037
A. Gopinath, M. S. Kumar, and A. Elayaperumal, “Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices,” Procedia Engineering, vol. 97, pp. 2052-2063, 2019. 2019 0.97
M. Zahid and M. Ali, “Efficiency of jute fibers in stabilized-earth-brick masonry work,” 2019. 2019
A. Wahab and M. Ali, “Effect of loading rates on behavior of concrete girders having GFRP rebars and jute fibers,” 2019. 2019
S. M. H. Sabri, “Behavior of jute fiber reinforced concrete having glass fiber reinforced polymer rebars for possible application in bridge pier,” Ph.D. dissertation, Capital University, 2019. 2019
F. Khan and M. Ali, “Dynamic response of interlocking plastic-block structure,” 2019. 2019
F. Qamar, T. Thomas, and M. Ali, “Improvement in lateral resistance of mortar- free interlocking wall with plaster having natural fibres,” Construction and Building Materials, vol. 234, p. 117387, 2019, 2019 4.046
U. Khan, D. Shams, F. Khalid, and M. Ali, “IUse of local bagasse-ash and recycled- concrete-aggregates as partial replacement of sand and coarse- aggregates in concrete for non-structural applications,” 2019. 2019
N. Ajaz, A. Rashid, and M. Ali, “Effect of column uplift on dynamic response of 3D structure,” 2019. 2019
F. Qamar, T. Thomas, and M. Ali, “Assessment of mechanical properties of fibrous mortar and interlocking soil stabilized block (ISSB) for low-cost masonry housing,” Materiales de Construccion, vol. 69, no. 336, p. 201, 2019. 2019 1.886
F. Qamar, T. Thomas, and M. Ali, “Assessment of mechanical properties of fibrous mortar and interlocking soil stabilized block (ISSB) for low-cost masonry housing,” Materials de Construction, vol. 69, 2019. 2019
M. Khan and M. Ali, “Improvement in concrete behavior with fly ash, silica-fume and coconut fibres,” Construction and Building Materials, vol. 203, pp. 174-187, 2019. 2019 4.046
T. Hussain and M. Ali, “Improving the impact resistance and dynamic properties of jute fiber reinforced concrete for rebars design by considering tension zone of FRC,” Construction and Building Materials, vol. 213, pp. 592-607, 2019. 2019 4.046
M. U. Farooqi and M. Ali, “Effect of pre-treatment and content of wheat straw on energy absorption capability of concrete,” Construction and Building Materials, vol. 224, pp. 572-583, 2019. 2019 4.046
G. A. Anwar, F. Dinu, and M. Ahmed, “Numerical study on ultimate deformation and resistance capacity of bolted T-Stub connection,” International Journal of Steel Structures, vol. 19, no. 3, pp. 970-977, 2019. 2019 0.873
T. Ahmed, K. Arooj, H. S. Ranja, F. M. U, and M. Ali, “Prospects of NFRC for pavements in developing countries,” 2019. 2019
K. M. Mehdi, U. Tahir, Q. Salar, S. Gul, and M. Ali, “Influence of bio-based admixture on the behavior of concrete,” 2019. 2019
L. Hussain and M. M. Khan, “Passive control of vortex shedding and drag reduction in laminar flow across circular cylinder using wavy wall channel,” 2019. 2019
L. A. Khan, M. M. Khan, A. Jan, and S. A. kazmi, “Acceleration of charging process of a horizontal latent thermal energy storage unit with longitudinal fins,” 2019. 2019
R. Sabir, M. M. Khan, and N. Sheikh, “Assessment of thermo-hydraulic performance of inward dimpled tubes with variation in angular orientations,” Applied Thermal En­gineering, vol. 170, p. 115040, 2019. 2019 4.026
S. O. B. Islam, W. A. Lughmani, W. S. Qureshi, A. Khalid, M. A. Mariscal, and S. Garcia-Herrero, “Exploiting visual cues for safe and flexible cyber-physical production systems,” Advances in Mechanical Engineering, vol. 11, no. 12, p. 1687814019897228, 2019. 2019 1.024
M. Khan, A. Khalid, W. A. Lughmani, and M. M. Khan, “Wave power potential estimation in the exclusive economic zone: A case study,” 2019. 2019
S. Rasheed, W. A. Lughmani, A. Khalid, and M. M. Khan, “Modelling of human robot accident interaction to assess impact and damage in a smart factory context,” 2019. 2019
I. S O, L. A. Khan, A. Khalid, and W. A. Lughmani, “Book chapter” A smart micro factory design: An integrated approach,” Computers & Industrial Engineering, vol. 129, pp. 220-227, 2019. 2019 3.518
S. S. Warsi, M. H. Agha, R. Ahmad, S. H. I. Jaffery, and M. Khan, “Sustainable turning using multi-objective optimization: a study of al 6061 t6 at high cutting speeds,” The International Journal of Advanced Manufacturing Technology, vol. 100, no. 1-4, pp. 843-855, 2019. 2019 2.496
S. S. Warsi, S. R. Ahmad, H. I. Jaffery, M. H. Agha, and M. Khan, “Sustainable machining: a comprehensive analysis of energy consumption during turning of Al 6061 T6 alloy,” 2019. 2019
T. Zahid, A. Baqai, and T. Schmidt, “meta-heuristics approach for the development of alternative process plans in reconfigurable systems,” 2019. 2019
T. Zahid, M. H. Agha, and T. Schmidt, “Investigation of surrogate measures of ro­bustness for project scheduling problems,” Computers & Industrial Engineering, vol. 129, pp. 220-227, 2019. 2019 3.518
Q. Mahmood and M. A. Qadir, “A comprehensive analysis of content-based similarity techniques for finding the redundancies and missing gaps in research papers features utilization,” 2019. 2019
I. Ihsan and M. A. Qadir, “CCRO: Citation’s Context & Reasons Ontology,” IEEE Access, vol. 7, pp. 30 423-30 436, 2019. 2019 3.557
M. U. Sadiq, M. M. Yousaf, L. Aslam, M. Aleem, S. Sarwar, and S. W. Jaffry, “NvPD: novel parallel edit distance algorithm, correctness, and performance evaluation,” Clus­ter Computing, pp. 1-16, 2019. 2019 1.851
M. Ullah, M. A. Islam, R. Khan, M. Aleem, and M. A. Iqbal, “Obsecure logging (OSLo): A framework to protect and evaluate the web search privacy in health care domain,” Journal of Medical Imaging and Health Informatics, vol. 9, no. 6, pp. 1181-1190, 2019. 2019 0.499
M. A. Iqbal, M. Aleem, M. Ibrahim, S. Anwar, and M. A. Islam, “Amazon cloud computing platform EC2 and VANET simulations,” International Journal of Ad Hoc and Ubiquitous Computing, vol. 30, no. 3, pp. 127-136, 2019. 2019 0.648
R. Khan, M. A. Islam, M. Ullah, M. Aleem, and M. A. Iqbal, “Privacy exposure mea­sure: A privacy-preserving technique for health-related web search,” Journal of Medical Imaging and Health Informatics, vol. 9, no. 6, pp. 1196-1204, 2019. 2019 0.499
F. Shahid, M. Aleem, M. A. Islam, M. A. Iqbal, M. M. Yousaf et al., “A review of technological tools in teaching and learning computer science,” Eurasia Journal of Mathematics, Science and Technology Education, vol. 15, no. 11, 2019. 2019
A. Hussain, M. Aleem, M. A. Iqbal, and M. A. Islam, “Investigation of cloud scheduling algorithms for resource utilization using cloudsim.” Computing & Informatics, vol. 38, no. 3, 2019. 2019 0.421
Y. N. Khalid, M. Aleem, U. Ahmed, M. A. Islam, and M. A. Iqbal, “Troodon: a machine-learning based load-balancing application scheduler for CPU-GPU system,” Journal of Parallel and Distributed Computing, vol. 132, pp. 79-94, 2019. 2019 1.815
M. Aleem, R. Prodan, M. A. Islam, and M. A. Iqbal, “On the parallel programmability of java symphony for multi-cores and clusters,” International Journal of Ad Hoc and Ubiquitous Computing, vol. 30, no. 4, pp. 247-264, 2019. 2019 0.648
A. Hussain, M. Aleem, M. A. Iqbal, and M. A. Islam, “SLA-RALBA: cost-efficient and resource-aware load balancing algorithm for cloud computing,” The Journal of Supercomputing, pp. 1-27, 2019. 2019 1.532
A. Shahid, M. T. Afzal, M. Abdar, M. E. Basiri, X. Zhou, N. Y. Yen, and J.-W. Chang, “Insights into relevant knowledge extraction techniques: a comprehensive review,” The Journal of Supercomputing, pp. 1-39, 2019. 2019 2.157
U. Ahmed, H. Waqas, and M. T. Afzal, “Pre-production box-office success quotient forecasting,” Soft Computing, pp. 1-19, 2019. 2019 2.784
M. Ameer and M. T. Afzal, “Evaluation of h-index and its qualitative and quanti­tative variants in neuroscience,” Scientometrics, vol. 121, no. 2, pp. 653-673, 2019. 2019 2.77
A. M. Khan, A. Shahid, M. T. Afzal, F. Nazar, F. S. Alotaibi, and K. H. Alyoubi, “SwICS: Section-wise in-text citation score,” IEEE Access, vol. 7, pp. 137090-137102, 2019. 2019 4.098
R. Ghani, F. Qayyum, M. T. Afzal, and H. Maurer, “Comprehensive evaluation of h-index and its extensions in the domain of mathematics,” Scientometrics, vol. 118, no. 3, pp. 809-822, 2019. 2019 2.173
Q.-u. Ain, H. Riaz, and M. T. Afzal, “Evaluation of h-index and its citation intensity based variants in the field of mathematics,” Scientometrics, vol. 111, no. 1, pp. 187-211, 2019. 2019 2.173
M. T. Ikram and M. T. Afzal, “Aspect based citation sentiment analysis using linguistic patterns for better comprehension of scientific knowledge,” Scientometrics, vol. 119, no. 1, pp. 73-95, 2019, 2019 2.173
R. Habib and M. T. Afzal, “Sections-based bibliographic coupling for research paper recommendation,” Scientometrics, vol. 119, no. 2, pp. 643-656, 2019. 2019 2.173
S. Ur Rehman, A. Nadeem, and M. A. Sindhu, “Towards automated testing of multi­agent systems using prometheus design models,” in The International Arab Journal of Information Technology, 2019, vol. 16, no. 1, pp. 54-65. 2019 0.41
M. Rizwan, A. Nadeem, and M. A. Sindhu, “Analyses of classifier’s performance mea­sures used in software fault prediction studies,” IEEE Access, vol. 7, pp. 82 764-82 775, 2019. 2019 4.098
N. M. Minhas, S. Masood, K. Petersen, and A. Nadeem, “A systematic mapping of test case generation techniques using UML interaction diagram,” Journal of Software: Evolution and Process, 2019. 2019 1.305
S. R. Aziz, T. Khan, and A. Nadeem, “Experimental validation of inheritance metrics’ impact on software fault prediction,” IEEE Access, vol. 7, pp. 85 262-85 275, 2019. 2019 4.098
F. Nazir, M. N. Majeed, M. A. Ghazanfar, and M. Maqsood, “An Arabic mispronunci­ation detection system based on frequency of mistakes for Asian speakers,” 2019. 2019
S. Afzal, M. Maqsood, F. Nazir, U. Khan, F. Aadil, K. M. Awan, I. Mehmood, and O.-Y. Song, “A data augmentation-based framework to handle class imbalance prob­lem for Alzheimer’s stage detection,” IEEE Access, vol. 7, pp. 115 528-115 539. 2019 4.098
M. Maqsood, F. Nazir, U. Khan, F. Aadil, H. Jamal, I. Mehmood, and O.-y. Song, “Transfer learning assisted classification and detection of alzheimer’s disease stages using 3D MRI scans,” Sensors, vol. 19, no. 11, p. 2645, 2019. 2019 3.031
F. Nazir, M. N. Majeed, M. A. Ghazanfar, and M. Maqsood, “Mispronunciation detection using deep convolutional neural network features and transfer learning- based model for Arabic phonemes,” IEEE Access, vol. 7, pp. 52 589-52 608, 2019. 2019 4.098
F. Nazir, M. A. Ghazanfar, M. Maqsood, F. Aadil, S. Rho, and I. Mehmood, “So­cial media signal detection using tweets volume, hashtag, and sentiment analysis,” Multimedia Tools and Applications, vol. 78, no. 3, pp. 3553-3586, 2019. 2019 2.101
K. Shaukat, N. Masood, and M. Khushi, “A novel approach to data extraction on hyperlinked webpages,” Applied Sciences, vol. 9, no. 23, p. 5102, 2019. 2019
U. Ahmed, M. Aleem, Y. Noman Khalid, M. Arshad Islam, and M. Azhar Iqbal, “RALB-HC: a resource-aware load balancer for heterogeneous cluster,” Concurrency and Computation: Practice and Experience, p. e5606, 2019. 2019 1.447
M. Ubaid Ur Rehman, M. Aleem, M. A. Islam, and S. Ahmed, “Smart applications for diabetes management: A comprehensive survey and ranking,” Health Informatics Journal, p. 1460458219869159, 2019. 2019 2.297
I. Qasim, M. W. Anwar, F. Azam, H. Tufail, W. H. Butt, and M. N. Zafar, “An introduction to model-driven mobile HMI Framework (MMHF) for industrial control systems,” 2019. 2019
I. Qasim, M. W. Anwar, F. Azam, H. Tufail, W. H. Butt, and M. N. Zafar, “A model- driven mobile HMI Framework (MMHF) for industrial control systems,” IEEE Access, vol. 8, pp. 10 827-10 846, 2019. 2019 4.098
M. Zahid, I. Inayat, M. Daneva, and Z. Mehmood, “A security risk mitigation frame­work for cyber physical systems,” Journal of software: Evolution and Process, p. e2219, 2019. 2019 1.305
M. T. Khan and S. I. Malik, “Structural dynamics behind variants in pyrazinamidase and pyrazinamide resistance,” Journal of Biomolecular Structure and Dynamics, pp. 1-15, 2019. 2019 3.31
M. T. Khan, A. C. Kaushik, A. I. Bhatti, Y.-J. Zhang, S. Zhang, A. J. Wei, S. I. Malik, and D. Q. Wei, “Marine natural products and drug resistance in latent tuberculosis,” Marine Drugs, vol. 17, no. 10, p. 549, 2019. 2019 3.772
A. U. Rehman, M. T. Khan, H. Liu, A. Wadood, S. I. Malik, and H.-F. Chen, “Ex­ploring the pyrazinamide drug resistance mechanism of clinical mutants T370P and W403G in Ribosomal Protein S1 of mycobacterium tuberculosis,” Journal of chemical information and modeling, vol. 59, no. 4, pp. 1584-1597, 2019. 2019 3.966
S. I. Malik, S. Ali, N. Masood, T. Nadeem, A. S. Khan, M. T. Afzal et al., “Pyrazinamide resistance and mutations in pncA among isolates of Mycobacterium tubercu­losis from Khyber Pakhtunkhwa, Pakistan,” BMC infectious diseases, vol. 19, no. 1, p. 116, 2019. 2019 2.62
M. T. Khan, A. C. Kaushik, S. I. Malik, S. Ali, and D. Wei, “Artificial neural networks for prediction of tuberculosis disease,” Frontiers in microbiology, vol. 10, no. 1, p. 395. 2019 1.232
E. Dilshad, N. Zahra, Z. Nooruddin, A. Butt, and S. m. Bakhtiar, “Single-cell editing: The CRISPR/Cas9 and applications,” pp. 397-415, 2019. 2019
H. Raja, E. Dilshad, S. Tayyaba, and A. Amin, “Isolation and screening of bacteria for their role in oil recovery and metal tolerance from petroleum reservoirs,” 2019. 2019
S. Rehman, K. Keefover-Ring, I. ul Haq, E. Dilshad, M. I. Khan, N. Akhtar, and B. Mirza, “Drier climatic conditions increase with an olide content of with an iacoagulans enhancing its inhibitory potential against human prostate cancer cells,” Applied biochemistry and biotechnology, vol. 188, no. 2, pp. 460-480, 2019. 2019 2.14
I. Younus, H. Ismail, E. D. Chahat Batool Rizvi, K. Saba, B. Mirza, and M. Tahir, “Antioxidant, analgesic and anti-inflammatory activities of in vitro and field-grown iceberg lettuce extracts,” Journal of Pharmacy & Pharmacognosy Research, vol. 7, no. 5, pp. 343-355, 2019. 2019
E. Dilshad, S. S. Tazeem, Z. Bashir, A. H. Iqbal, A. S. Khokhar, N. Zahra, M. A. Khan, H. Ismail, and M. Shabbir, “Silver nanoparticles of aloe vera gel as strong therapeutic candidates,” 2019
A. Kazmi, M. A. Khan, and H. Ali, “Biotechnological approaches for production of bioactive secondary metabolites in Nigella sativa: an up-to-date review,” International Journal of Secondary Metabolite, vol. 6, no. 2, pp. 172-195, 2019. 2019
H. Ali, M. A. Khan, W. K. Kayani, E. Dilshad, R. Rani, and R. S. Khan, “Production of biomass and medicinal metabolites through adventitious roots in ajuga bracteosa under different spectral lights,” Journal of Photochemistry and Photobiology B: Biology, vol. 193, pp. 109-117, 2019. 2019 4.067
S. Zafar, E. Dilshad, H. Ismail, C. B. Rizvi, and B. Mirza, “Rol genes enhance content of artemisinin and other secondary metabolites in shennong hybrid of artemisia annua,” Chinese Herbal Medicines, vol. 11, no. 2, pp. 209-215, 2019. 2019
M. S. Khan, B. Mehmood, Q. Yousafi, S. Bibi, S. Fazal, S. Saleem, M. W. Sajid, A. Ihsan, M. Azhar, and M. A. Kamal, “Molecular docking studies reveals rhein from rhubarb (Rheum rhabarbarum) as a putative inhibitor of ATP-binding Cassette Super Family G member 2,” Medicinal chemistry (Shariqah (United Arab Emirates)), 2019. 2019
A. Kanwal, S. Fazal, A. I. Bhatti, M. Ullah, and M. A. Khalid, “PubMedInfo Crawler: An innovative extraction process that leads towards biological information mining,” Meta Gene, vol. 20, p. 100550, 2019. 2019
A. Amin, I. Ahmed, N. K. Khalid, P. Schumann, and H. Jurgen, “Arthrobacter zafarii sp. nov., a moderately thermotolerant and halotolerant actinobacterium isolated from Cholistan desert soil of Pakistan,” International Journal of Systematic and Evolution­ary Microbiology, 2019. 2019 2.166
A. Amin, I. Ahmed, N. Khalid, I. U. Khan, and A. Ali, “Bacterial diversity of cholistan desert, Pakistan: insights on the comparative analysis between different arid zones,” Microorganisms, 2019. 2019 4.167
E. Dilshad, N. Zahra, Z. Nooruddin, A. A. Butt, and S. M. Bakhtiar, “Single-cell editing: The CRISPR/Cas9 and applications,” in Single-Cell Omics. Elsevier, 2019, pp. 397-415. 2019
F. Nawaz, M. N. Khan, A. Javed, I. Ahmed, N. Ali, M. I. Ali, S. M. Bakhtiar, and M. Imran, “Genomic and functional characterization of enterococcus mundtii QAUEM2808, isolated from artisanal fermented milk product dahi,” Frontiers in Mi­crobiology, vol. 10, 2019. 2019 4.259
H. Qayyum and S. M. Bakhtiar, “Single Cell Omics in cardiovascular disease,” 2019. 2019
M. Nadeem, U. Naz, and S. M. Bakhtiar, “TNF: common culprit of inflammatory diseases,” International Journal of Bioautomation, 2019. 2019 1.35
S. A and S. M. Bakhtiar, “Etiology, prevalence, treatment of causing syndrome and its involvement with other diseases,” Precision Medicine, vol. 3, 2019. 2019
F. M and S. M. Bakhtiar, “Homochromatosis- the trigger of type ii diabetes,” Precision Medicine, vol. 3, 2019. 2019
H. A. Butt, S. Gul, A. Azam, A. Aftab, and S. M. Bakhtiar, “Nutrigenetics and pharmacogenetics approaches in management of obesity,” Precision Medicine, vol. 3, 2019. 2019
I. S. Naveed, N. Afzal, M. Fiyaz, M. Nadeem, and S. M. Bakhtiar, “Precision medicine for multifactorial disorders,” Precision Medicine, vol. 3, 2019. 2019
H. Saira, A. Noor, I. Riasat, M. Qasim, and S. M. Bakhtiar, “Etiology, genetics, clinical manifestations and possible treatments of acromegaly,” Precision Medicine, vol. 3, 2019. 2019
M. N. Abrar, M. Sagheer, and S. Hussain, “Entropy formation analysis for the peri­staltic motion of ferrofluids in the presence of joule heating and fluid friction phe­nomena in a plumb duct,” Journal of Nanofluids, vol. 8, no. 6, pp. 1305-1313, 2019. 2019 0.98
M. Sagheer, S. Shah, S. Hussain, and M. Akhtar, “Impact of non-uniform heat source/sink on magnetohydrodynamic maxwell nanofluid flow over a convectively heated stretching surface with chemical reaction,” Journal of Nanofluids, vol. 8, no. 4, pp. 795-805, 2019. 2019 0.98
F. Shahzad, M. Sagheer, and S. Hussain, “Numerical solution of rotating flow of a nanofluid over a stretching surface in the presence of magnetic field,” Journal of Nanofluids, vol. 8, no. 2, pp. 359-370, 2019. 2019 0.98
I. Rashid, M. Sagheer, and S. Hussain, “Exact solution of stagnation point flow of MHD cu-h 2 o nanofluid induced by an exponential stretching sheet with thermal conductivity,” Physica Scripta, vol. 95, no. 2, p. 025207, 2019. 2019 2.151
I. Rashid, M. Sagheer, and S. Hussain, “Entropy formation analysis of MHD boundary layer flow of nanofluid over a porous shrinking wall,” Physica A: Statistical Mechanics and its Applications, vol. 536, p. 122608, 2019. 2019 2.5
N. Akmal, M. Sagheer, S. Hussain, and A. Kamran, “Investigation of free convection in micropolar nanofluid with induced magnetic field,” The European Physical Journal Plus, vol. 134, no. 5, p. 235, 2019. 2019 2.612
F. Shahzad, M. Sagheer, and S. Hussain, “MHD tangent hyperbolic nanofluid with chemical reaction, viscous dissipation and joule heating effects,” AIP Advances, vol. 9, no. 2, p. 025007, 2019. 2019 1.579
N. Akmal, M. Sagheer, S. Hussain, and A. Kamran, “Study of micropolar nanofluids with power-law spin gradient viscosity model by the keller box method,” Canadian Journal of Physics, vol. 98, no. 1, pp. 16-27, 2019. 2019 1.016
S. Batul, R. Ali, D. Shehwar, and N. Husain, “Nadler’s fixed-point theorem in c? – algebra valued metric spaces with applications,” 2019. 2019
S. Inam, S. Kanwal, and R. Ali, “Cryptosystem based on polynomials over circulant matrices,” 2019. 2019
M. Zia and R. Ali, “Cryptanalysis of an encryption scheme that uses elliptic curve over finite field,” 2019. 2019
F. Mehmood, R. Ali, and N. Hussain, “Fixed point result s for multivalued mappings in extended fuzzy b-metric space,” 2019. 2019
M. Sohail Ashraf, R. Ali, and N. Hussain, “New fixed-point results in generalized fuzzy metric spaces with applications,” 2019. 2019
R. Ali, M. Mubashar, and S. Batul, “A groebner bas is attack on a multivariate poly­nomial public key cryptosystem,” 2019. 2019
F. Mehmood, R. Ali, and N. Hussain, “Contractions in fuzzy rectangular b-metric spaces with application,” Journal of Intelligent & Fuzzy Systems, no. Preprint, pp. 1-11, 2019. 2019 1.637
M. Zia and R. Ali, “Cryptanalysis and improvement of blind signcryption scheme based on elliptic curve,” Electronics Letters, vol. 55, no. 8, pp. 457-459, 2019. 2019 1.343
S. Atif, S. Hussain, and M. Sagheer, “Effect of thermal radiation on MHD micropolar carreau nanofluid with viscous dissipation, joule heating, and internal heating,” Scientia Iranica, vol. 26, no. 6, pp. 3875-3888, 2019. 2019 1.017
S. Hussain, K. Mehmood, M. Sagheer, and A. Ashraf, “Mixed convective magneto nanofluid flow over a backward facing step and entropy generation using extended darcy-brinkman-forchheimer model,” Journal of Thermal Analysis and Calorimetry, vol. 138, 2019. 2019 2.731
S. M. Atif, S. Hussain, and M. Sahheer, “Numerical simulation of mixed convective magneto nanofluid flow and entropy generation over backward facing step with darcy-brinkman- forchheimer model,” Journal of Thermal Analysis and Calorimetry, vol. 138, pp. 3183-3203, 2019. 2019 2.471
S. Atif, S. Hussain, and M. Sagheer, “Effect of viscous dissipation and joule heating on MHD radiative tangent hyperbolic nanofluid with convective and slip conditions,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, no. 4, p. 189, 2019. 2019 1.743
A. Kamran, S. Hussain, and M. Sagheer, “Transport phenomena in marangoni driven Micropolar Alumina-Dihydrogen Oxide Nanofluid with thermal inertia,” Journal of Nanofluids, vol. 8, no. 5, pp. 1123-1132, 2019. 2019 0.98
M. Atlas, S. Hussain, and M. Sagheer, “Squeezing flow of upper convected maxwell nanofluid subject to entropy generation and cattaneo-christove double diffusion,” Jour­nal of Nanofluids, vol. 8, no. 2, pp. 420-429, 2019. 2019 0.98
S. Shah, S. Hussain, M. Sagheer, and M. Bilal, “Numerical study of three dimensional mixed convective maxwell nanofluid flow over a stretching surface with non-linear ther­mal radiation and convective boundary conditions,” Journal of Nanofluids, vol. 8, no. 1, pp. 160-170, 2019. 2019 0.98
S. Hussain, T. Armaghani, and M. Jamal, “Magnetoconvection and entropy analysis in T-Shaped porous enclosure using finite element method,” Journal of Thermophysics and Heat Transfer, pp. 1-12, 2019. 2019 1.051
S. Hussain, H. F. Oztop, M. A. Qureshi, and N. Abu-Hamdeh, “Magnetohydrodynamic flow and heat transfer of ferrofluid in a channel with non-symmetric cavities,” Journal of Thermal Analysis and Calorimetry, pp. 1-13, 2019. 2019 2.471
S. Hussain, M. Jamal, and S. E. Ahmed, “Hydrodynamic forces and heat transfer of nanofluid forced convection flow around a rotating cylinder using finite element method: The impact of nanoparticles,” International Communications in Heat and Mass Transfer, vol. 108, p. 104310, 2019. 2019 4.127
S. Hussain and S. E. Ahmed, “Steady natural convection in open cavities filled with a porous medium utilizing buongiorno’s nanofluid model,” International Journal of Mechanical Sciences, vol. 157, pp. 692-702, 2019. 2019 4.134
S. Hussain and S. E. Ahmed, “Unsteady mhd forced convection over a backward facing step including a rotating cylinder utilizing fe3o4-water ferrofluid,” Journal of Mag­netism and Magnetic Materials, vol. 484, pp. 356-366, 2019. 2019 2.683
S. Hussain, H. F. Oztop, K. Mehmood, and M. E. Ali, “Mixed convection and entropy production in a nanofluid-filled closed space with inclined magnetic field,” Journal of Thermal Analysis and Calorimetry, vol. 137, no. 5, pp. 1735-1755, 2019. 2019 2.209
S. M. Atif, S. Hussain, and M. Sagheer, “Magnetohydrodynamic stratified bioconvective flow of micropolar nanofluid due to gyrotactic microorganisms,” AIP Advances, vol. 9, no. 2, p. 025208, 2019. 2019 1.653
S. M. Atif, S. Hussain, and M. Sagheer, “Heat and mass transfer analysis of time- dependent tangent hyperbolic nanofluid flow past a wedge,” Physics Letters A, vol. 383, no. 11, pp. 1187-1198, 2019. 2019 1.863
M. Atlas, S. Hussain, and M. Sagheer, “Entropy generation and unsteady Casson fluid flow squeezing between two parallel plates subject to Cattaneo-Christov heat and mass flux,” The European Physical Journal Plus, vol. 134, no. 1, p. 33, 2019. 2019 2.24
J. U. Satti, M. Afzal, and R. Nawaz, “Scattering analysis of a partitioned wave-bearing cavity containing different material properties,” Physica Scripta, vol. 94, no. 11, p. 115223, 2019. 2019 2.151
T. Nawaz, M. Afzal, and R. Nawaz, “The scattering analysis of trifurcated waveguide involving structural discontinuities,” Advances in Mechanical Engineering, vol. 11, no. 7, p. 1687814019829282, 2019 2019 1.024
D. Shehwar, R. Ali, and S. Batool, “The C*-ALGEBRA valued caristi’s fixed point theorem: A graphic version,” Journal of Mathematical Analysis, vol. 10, 2019. 2019
M. Anwar, D. Shehwar, R. Ali, and S. Batool, “Fixed point and common fixed-point theorems on wardowski type mappings in sb-metric spaces,” 2019. 2019
M. Anwar, D. Shehwar, R. Ali, and N. Hussain, “Wardowski type @-F-contractive approach for nonself multivalued mappings,” University Politehnica of Bucharest Sci­entific BulletinSeries A-Applied Mathematics and Physics, 2019. 2019 0.478
S. Saeed and A. Hassan, “Liquidity commonality risk and asset pricing in emerging and developed stock,” NUML International Journal of Business & Management, vol. 19, no. 2, pp. 92-110, 2019. 2019
I. Yousaf and A. Hassan, “Linkages between crude oil and emerging Asian stock mar­kets: New evidence from the Chinese stock market crash,” Finance Research Letters, vol. 31, no. 4, pp. 207-217, 2019. 2019 1.709
E. Ishaq, S. Bashir, and A. K. Khan, “Paradoxical leader behaviors: Leader personality and follower outcomes,” Applied Psychology, 2019. 2019 3.265
E. Ishaq, S. Bashir, A. K. Khan, M. M. Hassan, and R. Zakarira, “Epistemic curiosity and perceived workload: a moderated mediation model of achievement striving and overwork climate,” The International Journal of Human Resource Management, pp. 1-24, 2019. 2019 3.15
A. Sarwar, S. Bashir, and A. Karim Khan, “Spillover of Workplace Bullying into Family Incivility: Testing a Mediated Moderation Model in a Time-Lagged Study,” Journal of Interpersonal Violence, p. 0886260519847778, 2019. 2019 2.443
L. Muhammad, I. Saba, and S. Aziz, “Maqasid al-shariah and Islamic finance industry: Addressing the concerns,” Journal of Islamic Business and Management, vol. 9, no. 2, pp. 368-376, 2019. 2019
A. Sarwar and L. Muhammad, “Impact of employee perceptions of mistreatment on organizational performance in the hotel industry,” International Journal of Contem­porary Hospitality Management, 2019. 2019 3.95
L. Muhammad, “Do service firm employee and customer relations matter for customer forgiveness in service recovery?” Asia Pacific Journal of Marketing and Logistics, vol. 29, pp. 1036-1054, 2019. 2019 1.204
N. T. Bhutta, B. Simonetti, and V. Ventre, “Does Islamic capital asset pricing model outperform conventional capital asset pricing model?” in Decision Making in Social Sciences: Between Traditions and Innovations, Springer, 2019, pp. 471-482, 2020. 2019
A. Mahmood Ahmed and S. Anwar, “Taxicab app usage: Cues inquiry and classifica­tion,” 2019. 2019
M. Kamran, J. Ahmed, and I. Ullah, “Does Islamic label indicate higher use of trade credit? evidence from shari ‘ah compliant non-financial firms in Pakistan,” Journal of Islamic Business and Management, vol. 9, no. 2, pp. 328-340, 2019. 2019
M. U. Niaz and M. Iqbal, “Effect of microfinance on women empowerment: A case study of Pakistan,” Paradigms, vol. 13, no. 1, pp. 52-59, 2019. 2019
M. M. Iqbal and A. Shah, “Economic rationale of the prohibition of interest: A new aspect,” Islamic Studies, vol. 58, no. 4, p. 503, 2019. 2019
M. Zulkifal, M. Abbas, K. Arif-ullah, N. Humaira, and A. S. Fawad, “Thiazolidine derivatives attenuate carrageenan-induced inflammatory pain in mice,” 2019. 2019
M. Abbas, S. Alzarea, R. L. Papke, and S. Rahman, “The a7 nicotinic acetylcholine receptor positive allosteric modulator prevents lipopolysaccharide-induced allodynia, hyperalgesia and TNF-a in the hippocampus in mice,” Pharmacological Reports, vol. 71, no. 6, pp. 1168-1176, 2019. 2019 2.761
F. A. Shah, G.-P. Liu, A. Kury, L. Tareq, A. Zeb, M. Abbas, T. Li, X. Yang, F. Liu, Y. Jiang et al., “Melatonin protects MCAO-induced neuronal loss via NR2A mediated prosurvival pathways,” Frontiers in pharmacology, vol. 10, p. 297, 2019. 2019 3.845
Z. Idris, M. Abbas, H. Nadeem, and A.-u. Khan, “The benzimidazole derivatives, b1 (n-[(1h-benzimidazol-2-yl) methyl]-4-methoxyaniline) and b8 (n-{4-[(1H-Benzimidazol- 2-yl) Methoxy] Phenyl} acetamide) attenuate morphine-induced paradoxical pain in mice,” Frontiers in neuroscience, vol. 13, 2019. 2019 3.648
H. Bibi, H. Nadeem, M. Abbas, and M. Arif, “Synthesis and anti-nociceptive potential of isoxazole carboxamide derivatives,” BMC Chemistry, vol. 13, no. 1, p. 6, 2019. 2019
N. S. Malik, M. Ahmads, M. U. Minhas, and Q. Khalid, “Determination of acyclovir in rabbit plasma by high performance liquid Chromatographic (hplc) Technique,” Acta Polpniae Pharmaceutica, vol. 76, no. 3, pp. 421-429, 2019. 2019 0.447
S. Bashir, A. Khan, and M. Mahmood, “Evaluation of the learning environment in pharmacy institutes of pakistan,” 2019. 2019
S. Bashir, “Pharmacological importance of manilkara zapota and its bioactive con­stituents,” Boletin Latinoamericano Y Del Caribe de Plantas Medicinales Y Aromati cas, vol. 18, no. 4, pp. 347-358, 2019. 2019 0.5
2018
S. Rehman, M. M. Ahmed, U. Rafique, and M. N. Khan, “A nonlinear model to assess DC/AC performance reliability of submicron SiC MESFETs,” Journal of Computational Electronics, pp. 1–11, 2018. 2018 1.526
Z. Ahmed, M. M. Ahmed, and M. B. Ihsan, “A novel differential fed high gain patch antenna using resonant slot loading,” Radioengineering, vol. 27, no. 3, pp. 662–670, 2018. 2018 1.048
Z. Ahmed, M. M. Ahmed, M. B. Ihsan, A. A. Chaudhary, and J. K. Arif, “Novel dual band patch antenna with gap coupled composite right/left-handed transmission line,” International Journal of Microwave and Wireless Technologies, pp. 1–7, 2018. 2018 0.745
M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “An improved model to assess temperature-dependent DC characteristics of submicron GaN HEMTs,” Journal of Computational Electronics, vol. 17, no. 2, pp. 653–662, 2018. 2018 1.0431
M. Riaz, M. M. Ahmed, U. Rafique, and U. F. Ahmed, “Assessment of intrinsic small signal parameters of submicron SiC MESFETs,” Solid-State Electronics, vol. 139, pp. 80–87, 2018. 2018 1.666
U. Qazi, M. R. Ali, and A. Moqueet, “An estimation of the impact of uninterpretable power supply systems on electricity distribution utility of Pakistan,” Journal of Basic and Applied Sciences, vol. 14, pp. 92–97, 2018. 2018
S. M. Shah, R. Samar, and M. A. Z. Raja, “Fractional-order algorithms for tracking rayleigh fading channels,” Nonlinear Dynamics, vol. 92, no. 3, pp. 1243–1259, 2018. 2018 1.4339
Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of epidemic computer virus model with effect of quarantine in the presence of immunity,” Fundamenta Informaticae, vol. 161, no. 3, pp. 249–273, 2018. 2018 0.725
A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle based control oriented model of a gasoline engine including multi-cylinder dynamics,” Control Engineering Practice, vol. 70, pp. 63–76, 2018. 2018 2.616
M. R. Azam, S. Fazal, M. Ullah, and A. I. Bhatti, “System-based strategies for p53 recovery,” IET Systems Biology, vol. 12, no. 3, pp. 101–107, 2018. 2018 0.573
A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle based control oriented gasoline engine model including lumped cylinder dynamics,” Journal of Dynamic Systems, Measurement, and Control, vol. 140, no. 8, pp. 1–9, 2018. 2018 1.521
A. Jafar, A. I. Bhatti, A. S. M, and N. Ahmed, “Robust gain scheduled control algorithm for lab helicopter: An LMI based approach,” IMECH Journal of Systems and Control Engineering, pp. 1–14, 2018. 2018 1.442
M. T. Khan, S. I. Malik, A. I. Bhatti, S. Ali, A. S. Khan, M. T. Zeb, T. Nadeem, and S. Fazal, “Pyrazinamide-resistant mycobacterium tuberculosis isolates from Khyber Pakhtunkhwa and rpsA mutations,” Journal of Biological Regulators and Homeostatic Agents, vol. 32, no. 3, pp. 705–709, 2018. 2018 1.397
A. Munir, S. Azam, S. Fazal, and A. I. Bhatti, “Evaluation of the whole body physiologically based pharmacokinetic (wb-pbpk) modeling of drugs,” Journal of Theoretical Biology, vol. 451, pp. 1–9, 2018. 2018 1.8333
A. Jafar, A. I. Bhatti, S. M. Ahmad, and N. Ahmed, “H∞ optimization-based robust decoupling control algorithm in linear parameter varying systems using hadamard weighting,” Transactions of the Institute of Measurement and Control, pp. 1–16, 2018. 2018 1.574
A. M. Chaudhry, A. Arshad Uppal, Y. M. Alsmadi, A. I. Bhatti, and V. I. Utkin, “Robust multi-objective control design for underground coal gasification energy conversion process,” International Journal of Control, pp. 1–17, 2018. 2018 2.101
U. Rafique and S. U. Din, “Beveled-shaped super-wideband planar antenna,” Turkish Journal of Electrical Engineering and Computer Sciences, pp. 1–9, 2018. 2018 0.58
S. Naz, R. N. B. Rais, P. A. Shah, S. Yasmin, A. Qayyum, S. Rho, and Y. Nam, “A dynamic caching strategy for CCN-based MANETs,” Computer Networks, vol. 142, pp. 93–107. 2018
K. A. Khaliq, S. M. Raza, O. Chughtai, A. Qayyum, and J. Pannek, “Experimental validation of an accident detection and management application in vehicular environment,” Computers & Electrical Engineering, vol. 71, pp. 137–150, 2018. 2018 1.747
M. Raza, N. Aslam, H. Le-Minh, S. Hussain, Y. Cao, and N. M. Khan, “A critical analysis of research potential, challenges, and future directives in industrial wireless sensor networks,” IEEE Communications Surveys & Tutorials, vol. 20, no. 1, pp. 39–95, 2018 2018 20.23
M. Y. M. Mirza, N. M. Khan, A. Jamal, and R. Ramer, “Characterization of spatial reflection co-efficient for ground-to-aircraft and satellite-to-aircraft communication.,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 1, 2018. 2018 0.59
M. Y. Wani, M. Riaz, and N. M. Khan, “Geometrical modeling of scattering environment for highways in umbrella cell based MIMO communication systems,” Wireless Personal Communications, vol. 101, no. 1, pp. 59–74, 2018. 2018 1.2
A. Yasin, M. Ashraf, and A. Bhatti, “Fixed frequency sliding mode control of power con¬verters for improved dynamic response in dc micro-grids,” Energies, vol. 11, no. 10, p. 2799, 2018. 2018 2.676
M. Rashad, M. Ashraf, A. I. Bhatti, D. M. Minhas, and B. A. Ahmed, “Mathematical modeling and stability analysis of DC microgrid using SM hysteresis controller,” International Journal of Electrical Power & Energy Systems, vol. 95, pp. 507–522, 2018. 2018 3.61
M. Rashad, U. Raoof, M. Ashraf, and B. Ashfaq Ahmed, “Proportional load sharing and stability of dc microgrid with distributed architecture using SM controller,” Mathematical Problems in Engineering, vol. 2018, 2018. 2018 1.145
M. Sajid, I. A. Taj, U. I. Bajwa, and N. I. Ratyal, “Facial asymmetry-based age group estimation: Role in recognizing age-separated face images,” Journal of forensic sciences, 2018. 2018
M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and M. Tahir, “An efficient framework for prediction parameters selection in advanced video coding,” IEEE Access, 2018. 2018 3.557
M. Ghafoor, S. Iqbal, S. A. Tariq, and N. M. Taj, Imtiaz A Jafri, “Efficient fingerprint matching using graphical processing unit,” IET Image Processing, vol. 12, no. 2, p. 274, 2018. 2018 1.401
N. Ratyal, I. Taj, U. Bajwa, and M. Sajid, “Pose and expression invariant alignment based multi-view 3D face recognition.,” KSII Transactions on Internet & Information Systems, vol. 12, no. 10, 2018. 2018 0.611
W. Abbasi, I. Shah, et al., “Smooth super twisting sliding mode based steering control for nonholonomic systems transformable into chained form,” Kybernetika, vol. 54, no. 3, pp. 476–495, 2018. 2018 0.632
S. ud Din and F. ur Rehman, “Synchronization of a novel 4-D hyperchaotic rikitake dynamo system along with unknown parameters via adaptive integral sliding mode,” Journal of Control Engineering and Applied Informatics, vol. 20, no. 1, pp. 108–118, 2018. 2018
S. ud Din, F. ur Rehman, and Q. Khan, “Smooth super-twisting sliding mode control for the class of underactuated systems,” PloS one, vol. 13, no. 10, p. e0203667, 2018. 2018 2.766
I. Shah and F. U. Rehman, “Smooth second order sliding mode control of a class of under-actuated mechanical systems,” IEEE Access, vol. 6, pp. 7759–7771, 2018. 2018 3.557
M. Khan and M. Ali, “Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber,” Construction and Building Materials, vol. 182, pp. 703–715, 2018. 2018 3.485
M. U. Farooqi and M. Ali, “Contribution of plant fibers in improving the behavior and capacity of reinforced concrete for structural applications,” Construction and Building Materials, vol. 182, pp. 94–107, 2018. 2018 3.485
F. Qamar, T. Thomas, and M. Ali, “Use of natural fibrous plaster for improving the out of plane lateral resistance of mortarless interlocked masonry walling,” Construction and Building Materials, vol. 174, pp. 320–329, 2018. 2018 0.485
M. Khan and M. Ali, “Effectiveness of hair and wave polypropylene fibers for concrete roads,” Construction and Building Materials, vol. 166, pp. 581–591, 2018. 2018 3.485
M. Ali, “Role of post-tensioned coconut-fibre ropes in mortar-free interlocking concrete construction during seismic loadings,” KSCE Journal of Civil Engineering, vol. 22, no. 4, pp. 1336–1343, 2018. 2018 0.812
M. Ahmed and T. Mahmood, “Elastic-displacement-based multi-modal pushover analysis in high-rise core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, pp. 1–22, 2018. 2018 1.5
M. M. Khan, J. H´elie, and M. Gorokhovski, “Computational methodology for nonevaporating spray in quiescent chamber using large eddy simulation,” International Journal of Multiphase Flow, vol. 102, pp. 102–118, 2018. 2018 2.592
M. Ebrahem, S. Manzoor, N. A. Sheikh, M. Ali, and M. M. Khan, “Numerical investigation of transient response of a coupled two-degrees-of-freedom symmetric airfoil before flutter,” International Journal of Aeroacoustics, vol. 17, no. 3, pp. 275–294, 2018. 2018 0.623
S. S. Warsi, S. H. I. Jaffery, R. Ahmad, M. Khan, M. H. Agha, and L. Ali, “Development and analysis of energy consumption map for high-speed machining of Al 6061-T6 alloy,” The International Journal of Advanced Manufacturing Technology, pp. 1–12, 2018. 2018 2.209
A. Ayub, N. A. Sheikh, R. Tariq, M. M. Khan, and C. M. Invernizzi, “Exergetic optimization and comparison of combined gas turbine supercritical CO2 power cycles,” Journal of Renewable and Sustainable Energy, vol. 10, no. 4, pp. 1–23, 2018. 2018 1.387
M. Irfan and M. Muradoglu, “A front tracking method for particle-resolved simulation of evaporation and combustion of a fuel droplet,” Computers & Fluids, 2018. 2018 2.21
H. Rafiq, M. Aleem, and M. A. Islam, “On the evaluation of android malware detectors,” Sukkur IBA Journal of Computing and Mathematical Sciences, vol. 2, no. 1, pp.20–28, 2018. 2018
H. Murtaza, M. A. Iqbal, M. A. Islam, and M. Aleem, “Content-aware reliable and energy-efficient MAC (CARE-MAC) protocol for wireless body area networks,” Ad Hoc & Sensor Wireless Networks, 2018. 2018 1.034
M. A. Iqbal, B. Dai, M. A. Islam, M. Aleem, and N.-S. Vo, “Topology-based floworiented adaptive network coding-aware routing scheme for VANETs,” KSII Transactions on Internet & Information Systems, vol. 12, no. 5, pp. 2044–2062, 2018. 2018 0.452
M. Ibrahim, M. A. Iqbal, M. Aleem, and M. A. Islam, “SIM-cumulus: An academic cloud for the provisioning of Network-Simulation-as-a-Service (NSaaS),” IEEE Access, vol. 6, pp. 27 313–27 323, 2018. 2018 3.244
A. Hussain, M. Aleem, A. Khan, M. A. Iqbal, and M. A. Islam, “RALBA: A computation-aware load balancing scheduler for cloud computing,” Cluster Computing, pp. 1–14, 2018. 2018 2.04
Y. N. Khalid, M. Aleem, R. Prodan, M. A. Iqbal, and M. A. Islam, “E-OSched: A load balancing scheduler for heterogeneous multicores,” The Journal of Supercomputing, pp. 1–33, 2018 2018 1.326
M. A. Jaffar, M. S. Zia, M. Hussain, A. B. Siddiqui, S. Akram, and U. Jamil, “An ensemble shape gradient features descriptor based nodule detection paradigm: A novel model to augment complex diagnostic decisions assistance,” Multimedia Tools and Applications, pp. 1–27, 2018. 2018 1.53
S. U. R. Khan, M. A. Islam, M. Aleem, and M. A. Iqbal, “Temporal specificity based text classification for information retrieval,” Turkish Journal of Electrical Engineering & Computer Science, 2018. 2018 0.52
M. Raheel, S. Ayaz, and M. T. Afzal, “Evaluation of h-index, its variants and extensions based on publication age & citation intensity in civil engineering,” Scientometrics, vol. 114, no. 3, pp. 1107–1127, 2018. 2018 2.147
M. T. Ikram, M. T. Afzal, and N. A. Butt, “Automated citation sentiment analysis using high order n-grams: A preliminary investigation,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 26, no. 4, pp. 1922–1932, 2018. 2018 2.573
M. T. Khan, S. I. Malik, S. Ali, A. Sheed Khan, T. Nadeem, M. T. Zeb, N. Masood, and M. T. Afzal, “Prevalence of pyrazinamide resistance in Khyber Pakhtunkhwa, Pakistan,” Microbial Drug Resistance, 2018. 2018 2.344
S. Haider, M. Tanvir Afzal, M. Asif, H. Maurer, A. Ahmad, and A. Abuarqoub, “Impact analysis of adverbs for sentiment classification on twitter product reviews,” Concurrency and Computation: Practice and Experience, p. e4956, 2018. 2018 1.114
F. Qayyum and M. T. Afzal, “Identification of important citations by exploiting research articles metadata and cue-terms from content,” Scientometrics, pp. 1–23, 2018. 2018 2.173
A. Y. Khan, A. S. Khattak, and M. T. Afzal, “Extending co-citation using sections of research articles,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 26, no. 6, pp. 3345–3355, 2018. 2018 0.52
R. Ahmad and M. T. Afzal, “CAD: an algorithm for citation anchors detection in research papers,” Scientometrics, vol. 117, no. 3, pp. 1405–1423, 2018. 2018 2.173
A. Hussain, M. Aleem, M. A. Islam, and M. A. Iqbal, “A rigorous evaluation of state-of¬the-art scheduling algorithms for cloud computing,” IEEE Access, 2018. 2018 3.557
S. U. R. Khan, M. A. Islam, M. Aleem, M. A. Iqbal, and U. Ahmed, “Section-based focus time estimation of news articles,” IEEE Access, vol. 6, pp. 75452–75460, 2018. 2018 3.55
A. Kanwal and S. Fazal, “Construction and analysis of protein-protein interaction network correlated with ankylosing spondylitis,” Gene, vol. 638, pp. 41–51, 2018. 2018 2.498
A. Munir, S. Azam, S. Aslam, A. Mehmood, G. M. Shah, S. Amjad, M. Younis, and S. Fazal, “Computational design of small interfering rnas and small hairpin rnas to silence mutated p53 gene expressions,” Informatics in Medicine Unlocked, vol. 12, pp. 1–5, 2018. 2018
N. Noureen, S. Fazal, A. M. Qaider, and A. Tanvir, “Hcvs: Pinpointing chromatin states through hierarchical clustering and visualization scheme,” Current Bioinformatics, 2018. 2018 0.54
W. K. Kayani, B. H. Kiani, E. Dilshad, and B. Mirza, “Biotechnological approaches for artemisinin production in artemisia,” World Journal of Microbiology and Biotechnology, vol. 34, no. 4, p. 54, 2018. 2018
A. Munir, S. Hussain, and E. Dilshad, “Silver nanoparticles conjugated with neurotrophin 3 upregulate myelin gene transcription pathway,” Journal of theoretical biology, vol. 459, pp. 111–118, 2018. 2018
S. Hussain, J. Z. K. Khattak, M. Ismail, Q. Mansoor, and M. H. Khan, “Molecular charac-terization of deafness in autosomal recessive pedigrees of Khyber Pakhtunkhwa Pakistan,” Pakistan Journal of Pharmaceutical Sciences, vol. 31, no. 1, pp. 51–56, 2018. 2018
M. T. Khan, A. U. Rehaman, M. Junaid, S. I. Malik, and D.-Q. Wei, “Insight into novel clinical mutants of RpsA-S324F, E325K, and G341R of mycobacterium tuberculosis asso¬ciated with pyrazinamide resistance,” Computational and structural biotechnology journal, vol. 16, pp. 379–387, 2018. 2018
M. Khan, S. Malik, A. Bhatti, S. Ali, A. Khan, M. Zeb, T. Nadeem, and S. Fazal, “Pyrazinamide-resistant mycobacterium tuberculosis isolates from khyber pakhtunkhwa and rpsA mutations.,” Journal of biological regulators and homeostatic agents, vol. 32, no. 3, p. 705, 2018. 2018 0.54
M. Anum, S. I. Malik, and K. A. Malik, “Proteome mining for the identification of putative drug targets for human pathogen clostridium tetani,” Current Bioinformatics, 2018. 2018 0.54
A. Munir, S. I. Malik, and K. A. Malik, “De-novo ligand design against mutated huntington gene by ligand-based pharmacophore modeling approach.,” Current computer-aided drug design, 2018. 2018
S. Atif, S. Hussain, and M. Sagheer, “Numerical study of mhd micropolar carreau nanofluid in the presence of induced magnetic field,” AIP Advances, vol. 8, no. 3, p. 035219, 2018. 2018 1.178
D.-C. Lu, M. Ramzan, M. Bilal, J. D. Chung, and U. Farooq, “Upshot of chemical species and nonlinear thermal radiation on oldroyd-B nanofluid flow past a bidirectional stretched surface with heat generation/absorption in a porous media,” Communications in Theoretical Physics, vol. 70, pp. 71–80, 2018. 2018 1.175
T. Sajid, M. Sagheer, S. Hussain, and M. Bilal, “Darcy-forchheimer flow of Maxwell nanofluid flow with nonlinear thermal radiation and activation energy,” AIP Advances, vol. 8, no. 3, p. 035102, 2018. 2018 1.565
M. Sagheer, M. Bilal, S. Hussain, and R. N. Ahmed, “Thermally radiative rotating magneto-nanofluid flow over an exponential sheet with heat generation and viscous dissipation: A comparative study,” Communications in Theoretical Physics, vol. 69, no. 3, p. 317, 2018. 2018 1.178
S. Atif, S. Hussain, and M. Sagheer, “Numerical study of mhd micropolar carreau nanofluid in the presence of induced magnetic field,” AIP Advances, vol. 8, no. 3, p.035219, 2018. 2018 1.653
M. Atlas, S. Hussain, and M. Sagheer, “Entropy generation and squeezing flow past a riga plate with cattaneo-christov heat flux,” Bulletin of the Polish Academy of Sciences: Technical Sciences, 2018. 2018 1.361
S. Shah, S. Hussain, and M. Sagheer, “Thermal stratification effects on mixed convective maxwell fluid flow with variable thermal conductivity and homogeneous/heterogeneous reactions,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 9, p. 452, 2018. 2018 1.627
S. Hussain, H. F. Oztop, K. Mehmood, and M. E. Ali, “Control of combined convection in a nanofluid-filled lid-driven closed space via rectangular bar in the presence of magnetic field,” Journal of Thermal Analysis and Calorimetry, pp. 1–18, 2018. 2018 2.209
A. Kamran, S. Hussain, and M. Sagheer, “Impact of induced magnetic field on free convec¬tive flow of kerosene/water based single and multiwalled carbon nanotubes,” AIP Advances, vol. 8, no. 10, p. 105130, 2018. 2018 1.653
S. Hussain, S. E. Ahmed, and F. Saleem, “Impact of periodic magnetic field on entropy generation and mixed convection,” Journal of Thermophysics and Heat Transfer, pp. 1–14, 2018. 2018 1.085
M. Zia and R. Ali, “Cryptanalysis and improvement of an elliptic curve based signcryption scheme for firewalls,” PloS one, vol. 13, no. 12, p. e0208857, 2018. 2018 2.766
B. Javed, A. K. Khan, S. Arjoon, M. Mashkoor, and A. u. Haque, “Openness to experience, ethical leadership, and innovative work behavior,” The Journal of Creative Behavior, 2018. 2018 1.615
M. B. Saeed, M. M. Iqbal, and K. S. Syed, “Corporate governance mechanisms and conservatism; evidence from Pakistan,” NICE Research Journal of Social Sciences, vol. 11, pp. 18–38, 2018. 2018
A. Khan and S. M. M. R. Naqvi, “The impact of internalized stigma at workplace through interlinking mechanism of self-esteem of tuberculosis patients in Pakistan,” Journal of Managerial Sciences, vol. 9, pp. 323–342, 2018 2018
Q. Hayat and S. M. M. R. Naqvi, “Job strain, employee greed, and employee envy: Moderating role of self-monitoring in the banking sector of Pakistan,” Journal of Managerial Sciences, vol. 9, pp. 221–224, 2018. 2018
B. Javed, M. Y. A. Rawwas, S. Khandai, K. Shahid, and H. H. Tayyeb, “Ethical leadership, trust in leader and creativity: The mediated mechanism and an interacting effect,” Journal of Management & Organization, pp. 1–18, 2018. 2018 1.159
J. Ahmed and M. Mughal, “They earn and send; we spend: Consumption patterns of Pakistani migrant households,” International Journal of Social Economics, vol. 45, no. 7, pp. 1092–1108, 2018. 2018
S. Rizwan, J. Ahmed, and R. Rasiah, “The devil made me do it: Environmental factors leading to corporate financial fraud,” Journal of Managerial Sciences, vol. 11, no. 03, pp. 321–353, 2018. 2018
S. Fatima and M. A. Zafar, “Servant leadership and meaningfulness at work: The contingency effect of leader ethical sensitivity,” Pakistan Journal of Social Sciences, vol. 38, no. 1, 2018. 2018
M. Khalid, S. Bashir, A. K. Khan, and N. Abbas, “When and how abusive supervision leads to knowledge hiding behaviors: An islamic work ethics perspective,” Leadership & Organization Development Journal, vol. 39, no. 6, pp. 794–806, 2018. 2018 1.067
S. A. Khattak and S. Bashir, “Evaluation of union commitment in public sector organi¬zations of pakistan: A time lagged study.,” Abasyn University Journal of Social Sciences, vol. 11, no. 1, 2018. 2018
A. Majeed and S. Ahmed, “Do board audit and cultural dynamics affect firm performance? evidence from karachi meezan index,” Journal of Islamic Business and Management, vol. 8, no. 2, 2018. 2018
2017
N. Fatima, F. Aziz, Z. Ahmad, M. A. Najeeb, M. I. Azmeer, K. S. Karimov, M. M. Ahmed, S. Basheer, R. A. Shakoor, and K. Sulaiman, “Compositional engineering of the pi-conjugated small molecular VOPcPhO: Alq3 complex to boost humidity sens­ing,” RSC Advances, vol. 7, no. 32, pp. 19 780–19 786, 2017. 2017 3.108
Q. Zafar, N. Fatima, K. S. Karimov, M. M. Ahmed, and K. Sulaiman, “Realizing broad-bandwidth visible wavelength photodiode based on solution-processed ZnPc/PC71BM dyad,” Optical Materials, vol. 64, pp. 131–136, 2017. 2017 2.235
K. S. Karimov, Z. Ahmad, N. Fatima, M. M. Ahmed, and M. Abid, “Effect of humidity on copper phthalocyanine films deposited at different gravity conditions,” Pigment & Resin Technology, vol. 46, no. 1, pp. 64–70, 2017. 2017 0.67
K. S. Karimov, M. H. Sayyad, M. M. Ahmed, M. N. Khan, Z. M. Karieva, S. A. Moiz, M. Shah, K. h. Zakaullah, and M. A. Turaeva, “Effect of temperature and humid­ity on electrical properties of organic orange dye complex films,” Eurasian Chemico-Technological Journal, vol. 6, no. 2, pp. 145–149, 2017. 2017
S. U. Rahman, Q. CAO, M. M. Ahmed, and H. Khalil, “Analysis of linear antenna array for minimum side lobe level, half power beamwidth, and nulls control using PSO,” Jour­nal of Microwaves, Optoelectronics and Electromagnetic Applications, vol. 16, no. 2, pp. 577–591, 2017. 2017
N. Fatima, M. M. Ahmed, K. S. Karimov, Z. Ahmad, and F. F. Muhammad, “Optical sensors based on the NiPc CoPc composite films deposited by drop casting and under the action of centrifugal force,” Chinese Physics B, vol. 26, no. 6, 2017. 2017 1.223
M. M. Ahmed, M. Riaz, and U. F. Ahmed, “An improved model for the I − V char­acteristics of submicron SiC MESFETs by evaluating the potential distribution inside the channel,” Journal of Computational Electronics, vol. 16, no. 3, pp. 1–12, 2017. 2017 1.562
N. Fatima, M. M. Ahmed, and K. S. Karimov, “Effects of humidity and temperature on orange dye-based organic field effect transistors fabricated at different gravity,” Journal of Electronic Materials, vol. 46, no. 11, pp. 6588–6594, 2017. 2017 1.579
J. S. Malik, U. Rafique, S. A. Ali, and M. A. Khan, “Novel patch antenna for multiband cellular, WiMAX, and WLAN applications,” Turkish Journal of Electrical Engineering and Computer Sciences, vol. 25, no. 3, pp. 2005–2014, 2017. 2017 0.58
K. Majeed, Z. Masood, R. Samar, and M. A. Z. Raja, “A genetic algorithm optimized Morlet wavelet artificial neural network to study the dynamics of nonlinear troesch’s system,” Applied Soft Computing, vol. 56, pp. 420–435, 2017. 2017 3.541
S. M. Shah, R. Samar, N. M. Khan, and M. A. Z. Raja, “Design of fractional-order variants of complex LMS and NLMS algorithms for adaptive channel equalization,” Nonlinear Dynamics, vol. 88, no. 2, pp. 839–858, 2017. 2017 3.464
Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of Mexican Hat Wavelet neural networks for solving Bratu type nonlinear systems,” Neurocomputing, vol. 221, pp. 1–14, 2017. 2017 3.317
M. A. Z. Raja, R. Samar, M. A. Manzar, and S. M. Shah, “Design of unsupervised fractional neural network model optimized with interior point algorithm for solving Bagley–Torvik equation,” Mathematics and Computers in Simulation, vol. 132, pp. 139–158, 2017. 2017 1.218
F. Khattak, M. Haseeb, S. Fazal, A. I. Bhatti, and M. Ullah, “Mathematical modeling of E6-p53 interactions in cervical cancer,” Asian Pacific Journal of Cancer Prevention, vol. 18, no. 4, pp. 1057–1061, 2017. 2017 1.24
A. A. Uppal, Y. M. Alsmadi, V. I. Utkin, A. I. Bhatti, and S. A. Khan, “Sliding mode control of underground coal gasification energy conversion process,” IEEE Transactions on Control Systems Technology, vol. 26, no. 2, pp. 587–598, 2017. 2017 3.992
M. Haseeb, S. Azam, A. I. Bhatti, R. Azam, M. Ullah, and S. Fazal, “On p53 revival using system oriented drug dosage design,” Journal of Theoretical Biology, vol. 415, pp. 53–57, 2017. 2017 2.133
A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle-based control oriented model of a gasoline engine,” Journal of Dynamic Systems, Measurement, and Control, vol. 139, no. 5, pp. 1–14, 2017. 2017 1.355
Q. Khan, R. Akmeliawati, A. I. Bhatti, and M. A. Khan, “Robust stabilization of underactuated nonlinear systems: A fast terminal sliding mode approach,” ISA Trans­actions, vol. 66, pp. 241–248, 2017. 2017 3.394
S. A. Tariq, S. Iqbal, M. Ghafoor, I. A. Taj, N. M. Jafri, S. Razzaq, and T. Zia, “Massively parallel palmprint identification system using GPU,” Cluster Computing, pp. 1–16, 2017. 2017 2.04
Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Cut locus and optimal synthesis in sub-Riemannian problem on the lie group SH(2),” Journal of Dynamical and Control Systems, vol. 23, no. 1, pp. 155–195, 2017. 2017 0.708
K. A. Khaliq, A. Qayyum, and J. Pannek, “Performance analysis of proposed conges­tion avoiding protocol for IEEE 802.11s,” International Journal of Advanced Computer Science and Applications, vol. 8, no. 2, pp. 356–369, 2017. 2017
S. Yasmin, A. Qayyum, and R. N. B. Rais, “Cooperation in opportunistic networks: An overlay approach for destination-dependent utility-based schemes,” Arabian Journal for Science and Engineering, vol. 42, no. 2, pp. 467–482, 2017. 2017
S. Din, Q. Khan, F. Rehman, and R. Akmeliawanti, “A comparative experimental study of robust sliding mode control strategies for underactuated systems,” IEEE Ac­cess, 2017. 2017 3.244
H. Raza and N. M. Khan, “Low complexity linear channel estimation for MIMO com­munication systems,” Wireless Personal Communications, pp. 1–14, 2017. 2017 0.951
N. M. Khan and H. Raza, “Processing-efficient distributed adaptive RLS filtering for computationally constrained platforms,” Wireless Communications and Mobile Com­puting, vol. 2017, 2017. 2017 1.899
G. Ahmed and N. M. Khan, “Adaptive power-control based energy-efficient routing in wireless sensor networks,” Wireless Personal Communications, vol. 94, no. 3, pp. 1297–1329, 2017. 2017 0.951
M.-Y. M. Mirza, G. Ahmed, and N. M. Khan, “Model-based adaptive transmission power control (MATPoC) for wireless sensor networks in fading environment,” Journal of Circuits, Systems and Computers, vol. 26, no. 09, pp. 1–34, 2017. 2017 0.481
A. A. Awan, H. Ishtiaq, and M. Hassan, “Optimizing lining length of watercourses for increased water saving in Punjab, Pakistan,” Journal of Biodiversity and Environmen­tal Sciences (JBES), vol. 10, no. 2, pp. 173–180, 2017. 2017
I. Hassan, A. R. Ghumman, Y. Ghazaw, R. H. Abdel-Maguid, and B. Samreen, “Cli­mate change impact on precipitation in arid areas of Pakistan,” International Journal of Water Resources and Arid Environments, vol. 6, no. 1, pp. 80–88, 2017. 2017
M. Ahmed, “No access fluid viscous dampers locations in reinforced-concrete core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, vol. 170, no. 1, pp. 33–50, 2017. 2017 0.424
M. Ali, “Role of post-tensioned Coconut-fibre ropes in mortar-free interlocking concrete construction during seismic loadings,” KSCE Journal of Civil Engineering, pp. 1–8, 2017. 2017 0.818
T. Mehmood, P. Warnitchai, M. Ahmed, and M. I. Qureshi, “Alternative approach to compute shear amplification in high-rise reinforced concrete core wall buildings using uncoupled modal response history analysis procedure,” The Structural Design of Tall and Special Buildings, vol. 26, no. 4, 2017. 2017 1.195
J. Iqbal, Z. H. Khan, and A. Khalid, “Prospects of robotics in food industry,” Food Science and Technology (Campinas), vol. 37, no. 2, pp. 159–165, 2017. 2017 1.64
S. S. Warsi, S. H. I. Jaffery, R. Ahmad, M. Khan, L. Ali, M. H. Agha, and S. Akram, “Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 1–13, 2017. 2017 1.366
A. Ashfaq, Z. H. Kamali, M. H. Agha, and H. Arshid, “Heat coupling of the pan-European vs. regional electrical grid with excess renewable energy,” Energy, vol. 122, pp. 363–377, 2017. 2017 1.772
M. M. Khan, J. H´elie, M. Gorokhovski, and N. A. Sheikh, “Experimental and numerical study of flash boiling in gasoline direct injection sprays,” Applied Thermal Engineering, vol. 123, pp. 377–389, 2017. 2017 3.356
M. M. Khan, J. H´elie, M. Gorokhovski, and N. A. Sheikh, “Air entrainment in high pressure multihole gasoline direct injection sprays,” Journal of Applied Fluid Mechanics, vol. 10, no. 4, pp. 1223–1234, 2017. 2017
M. R. Bhatti, N. A. Sheikh, S. Manzoor, M. M. Khan, and M. Ali, “Numerical study of hydrogen peroxide thermal decomposition in a shock tube,” Journal of Thermal Science, vol. 26, no. 3, pp. 235–244, 2017. 2017
M. M. Khan and N. A. Sheikh, “Experimental characterization of high pressure gasoline direct injection sprays,” Journal of Mechanical Science and Technology, vol. 31, no. 4, pp. 2015–2022, 2017. 2017 1.128
M. Ahmad, M. A. Qadir, and T. Ali, “Indexing for semantic cache to reduce query matching complexity,” Journal of the National Science Foundation of Sri Lanka, vol. 45, no. 1, 2017. 2017 0.42
S. Khan and M. A. Qadir, “Deterministic time markov chain modeling of simultaneous multipath transmission schemes,” IEEE Access, vol. 5, 2017. 2017 3.244
N. Noureen, H. M. Zohaib, M. A. Qadir, and S. Fazal, “ChromBiSim: Interactive chromatin biclustering using a simple approach,” Genomics, 2017. 2017 3.27
R. Ahmad, M. T. Afzal, and M. A. Qadir, “Pattern analysis of citation-anchors in citing documents for accurate identification of in-text citations,” IEEE Access, vol. 5, pp. 5819–5828, 2017. 2017 3.244
N. Ikram, M. Qadir, and M. Afzal, “Investigating correlation between protein sequence similarity and semantic similarity using gene ontology annotations,” IEEE/ACM Transactions on Computational Biology and Bioinformatics, 2017. 2017 1.955
A. Shahid and M. T. Afzal, “Section-wise indexing and retrieval of research articles,” Cluster Computing, pp. 1–12, 2017. 2017 2.04
S. A. Khan, M. A. Qadir, M. A. Abbas, and M. T. Afzal, “OWL2 benchmarking for the evaluation of knowledge based systems,” PloS One, vol. 12, no. 6, p. e0179578, 2017. 2017 2.806
R. Habib and M. T. Afzal, “Paper recommendation using citation proximity in bibli­ographic coupling,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 25, no. 4, pp. 2708–2718, 2017. 2017 0.578
M. Imran, M. T. Afzal, and M. A. Qadir, “A comparison of feature extraction tech­niques for malware analysis,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 25, no. 2, pp. 1173–1183, 2017. 2017 0.578
M. A. Iqbal, M. Aleem, M. Ibrahim, A. Saleem, and M. A. Islam, “Amazon cloud computing platform EC2 and VANET simulations,” accepted in International Journal of Ad hoc and Ubiquitous Computing (Inderscience), 2017. 2017 0.705
M. Aleem, P. Radu, M. A. Islam, and M. A. Iqbal, “On the parallel programmability of JavaSymphony for multi-cores and clusters,” accepted in International Journal of Ad hoc and Ubiquitous Computing, 2017. 2017 0.705
S. Aurangzeb, M. Aleem, M. A. Iqbal, and M. A. Islam, “Ransomware: A survey and trends.” Journal of Information Assurance & Security, vol. 6, no. 2, 2017. 2017
M. Badri, M. Aleem, M. Arshad Islam, M. A. Iqbal, and M. Waqar, “Fast imple­mentation of minimum spanning tree method and applying it to kruskal’s and prim’s algorithms,” Sukkur IBA Journal of Computing and Mathematical Sciences, vol. 1, no. 1, pp. 58–66, 2017. 2017
M. Aleem, A. Ishtiaq, S. H. Abbasi, and M. A. Islam, “User tracking mechanisms and counter measures,” International Journal of Applied Mathematics, Electronics and Computers, vol. 5, no. 2, pp. 33–40, 2017. 2017
Z. Halim, A. R. Baig, G. Abbas, and M. A. Islam, “Computational intelligence-based search of entertaining rules in the space of predator/prey games,” Journal of Multiple-Valued Logic & Soft Computing, vol. 28, no. 6, 2017. 2017 0.365
S. A. Khan and A. Nadeem, “Automated generation and infeasible detection of test paths for data flow testing using genetic algorithm,” Science International, vol. 29, no. 2, pp. 311–311, 2017. 2017 1.365
M. N. Shahwani, S. Nisar, A. Aleem, M. Panezai, S. Afridi, and S. I. Malik, “Ampli­fication of mitochondrial DNA for detection of plasmodiumvivax in Balochistan,” The Journal of the Pakistan Medical Association, vol. 67, no. 5, p. 677, 2017. 2017 0.616
A. Munir, S. Azam, S. Ali, A. Mehmood, A. H. Shah et al., “Repurposing of modified alpidem and propoxyphene to cure AURKA, BCAS1, GNAS and MLH1 gene mutations in colorectal cancer,” Drug Designing, vol. 6, no. 141, pp. 2169–0138, 2017. 2017
F. Khattak, M. Haseeb, S. Fazal, A. I. Bhatti, and M. Ullah, “Mathematical modeling of E6-p53 interactions in cervical cancer,” Asian Pacific Journal of Cancer Prevention, vol. 18, no. 4, p. 1057, 2017. 2017 1.24
A. Saeed, P. A. Channar, F. A. Larik, F. Jabeen, U. Muqadar, S. Saeed, U. Florke, H. Ismail, E. Dilshad, and B. Mirza, “Design, synthesis, molecular docking studies of organotin-drug derivatives as multi-target agents against antibacterial, antifungal, α­amylase, α-glucosidase and butyrylcholinesterase,” Inorganica Chimica Acta, vol. 464, pp. 204–213, 2017. 2017 2.002
S. Azam, A. Munir, M. S. Khan, S. Fazal, A. Mehmood et al., “In-silico identification of novel resistant genes for fungal pathogen fusarium oxysporum f.sp. cubense race 4: Causative agent of banana vascular wilt disease,” Journal Of Plant Biochemistry & Physiology, vol. 5, no. 175, p. 2, 2017. 2017
S. Hussain, J. Z. K. Khattak, M. Ismail, Q. Mansoor, and M. H. Khan, “Molecular characterization of deafness in autosomal recessive pedigrees of Khyber Pakhtunkhwa,” Pakistan Journal of Pharmaceutical Sciences, vol. 31, no. 1, 2017. 2017 0.649
H. Ismail, E. Dilshad, M. T. Waheed, and B. Mirza, “Transformation of Lettuce with rol ABC Genes: Extracts show enhanced antioxidant, analgesic, anti-Inflammatory, an­tidepressant, and anticoagulant activities in aats,” Applied Biochemistry and Biotech­nology, vol. 181, no. 3, pp. 1179–1198, 2017. 2017 1.751
S. Hussain, “Finite element solution for MHD flow of nanofluids with heat and mass transfer through a porous media with thermal radiation, viscous dissipation and chem­ical reaction effects,” Advances in Applied Mathematics and Mechanics, vol. 9, no. 4, pp. 904–923, 2017. 2017 0.763
Y. Mehmood, M. Sagheer, and S. Hussain, “MHD oblique stagnation point flow of nanofluid over a convective stretching surface,” Journal of Computational and Theo­retical Nanoscience, vol. 14, no. 4, pp. 1724–1734, 2017. 2017 1.666
S. Hussain, S. Ahmad, K. Mehmood, and M. Sagheer, “Effects of inclination angle on mixed convective nanofluid flow in a double lid-driven cavity with discrete heat sources,” International Journal of Heat and Mass Transfer, vol. 106, pp. 847–860, 2017. 2017 3.453
Y. Mehmood, M. Sagheer, S. Hussain, and M. Bilal, “MHD stagnation point flow and heat transfer in viscoelastic fluid with cattaneo–christov heat flux model,” Neural Computing and Applications, pp. 1–8, 2017. 2017 2.525
M. Bilal, M. Sagheer, and S. Hussain, “Three dimensional MHD upper-convected maxwell nanofluid flow with nonlinear radiative heat flux,” Alexandria Engineering Journal, 2017. 2017
M. Bilal, M. Sagheer, S. Hussain, and Y. Mehmood, “MHD stagnation point flow of williamson fluid over a stretching cylinder with variable thermal conductivity and ho­mogeneous/heterogeneous reaction,” Communications in Theoretical Physics, vol. 67, no. 6, p. 688, 2017. 2017 0.989
M. Bilal, S. Hussain, and M. Sagheer, “Boundary layer flow of magneto-micropolar nanofluid flow with hall and ion-slip effects using variable thermal diffusivity,” Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 65, no. 3, pp. 383–390, 2017. 2017 1.156
K. Mehmood, S. Hussain, and M. Sagheer, “Mixed convection in alumina-water nanofluid filled lid-driven square cavity with an isothermally heated square blockage inside with magnetic field effect: Introduction,” International Journal of Heat and Mass Transfer, vol. 109, pp. 397–409, 2017. 2017 3.458
K. Mehmood, S. Hussain, and M. Sagheer, “Numerical simulation of MHD mixed convection in alumina–water nanofluid filled square porous cavity using KKL model: Effects of non-linear thermal radiation and inclined magnetic field,” Journal of Molecular Liquids, vol. 238, pp. 485–498, 2017. 2017 3.648
M. Bilal, M. Sagheer, and S. Hussain, “On MHD 3D upper convected maxwell fluid flow with thermophoretic effect using non-linear radiative heat flux,” Canadian Journal of Physics, 2017. 2017 0.877
S. Hussain, S. E. Ahmed, and T. Akbar, “Entropy generation analysis in MHD mixed convection of hybrid nanofluid in an open cavity with a horizontal channel containing an adiabatic obstacle,” International Journal of Heat and Mass Transfer, vol. 114, pp. 1054–1066, 2017. 2017 3.453
S. Hussain, H. F. Oztop, M. Jamal, and N. A. Hamdeh, “Double diffusive nanofluid flow in a duct with cavity heated from below,” International Journal of Mechanical Sciences, vol. 131, pp. 535–545, 2017. 2017 2.884
A. Kamran, S. Hussain, M. Sagheer, and N. Akmal, “A numerical study of magnetohy­drodynamics flow in casson nanofluid combined with joule heating and slip boundary conditions,” Results in Physics, vol. 7, pp. 3037–3048, 2017. 2017 0.946
J. B. Lawrie and M. Afzal, “Acoustic scattering in a waveguide with a height disconti­nuity bridged by a membrane: A tailored galerkin approach,” Journal of Engineering Mathematics, vol. 105, no. 1, pp. 99–115, 2017. 2017 1.076
J. Ahmed, “Does external debt lead to growth in the presence of quality institutions?” World Economy Brief, vol. 7, no. 22, pp. 1–5, 2017. 2017
N. Kanwal, M. S. Zafar, and S. Bashir, “The combined effects of managerial control, resource commitment, and top management support on the successful delivery of in­formation systems projects,” International Journal of Project Management, vol. 35, no. 8, pp. 1459–1465, 2017. 2017 4.034
S. Shaheen, S. Bashir, and A. K. Khan, “Examining organizational cronyism as an antecedent of workplace deviance in public sector organizations,” Public Personnel Management, vol. 46, no. 3, pp. 308–323, 2017. 2017 0.981
M. M. Hassan, S. Bashir, and S. M. Abbas, “The impact of project managers person­ality on project success in NGOs: The mediating role of transformational leadership,” Project Management Journal, vol. 48, no. 2, pp. 74–87, 2017. 2017 2.714
B. Javed, A. A. Khan, S. Bashir, and S. Arjoon, “Impact of ethical leadership on creativity: the role of psychological empowerment,” Current Issues in Tourism, vol. 20, no. 8, pp. 839–851, 2017. 2017 2.451
B. Javed, S. Bashir, M. Y. A. Rawwas, and S. Arjoon, “Islamic work ethic, inno­vative work behaviour, and adaptive performance: the mediating mechanism and an interacting effect,” Current Issues in Tourism, vol. 20, no. 6, pp. 647–663, 2017. 2017 2.451
I. Rasool, A. Rajput et al., “The impact of perceived internal corporate social responsi­bility on organizational citizenship behavior: A micro-perspective analysis,” Business & Economic Review, vol. 9, no. 1, pp. 181–201, 2017. 2017
A. U. Shah and M. I. Khan, “The mediating role of overall justice in justice employees attitudes relationship: A test of five factors mode,” Journal of Managerial Science, vol. 10, no. 3, pp. 27–48, 2017. 2017 3.962
I. Ahmad and M. A. Zafar, “Impact of psychological contract fulfillment on orga­nizational citizenship behavior: Mediating role of perceived organizational support,” International Journal of Contemporary Hospitality Management, vol. 30, no. 2, pp. 1001–1015, 2017. 2017 2.874
L. Saqib and M. A. Zafar, “A critical analysis of shari’ah issues in the contemporary state bank guidelines on islamic agriculture finance (a study from Pakistan),” Islamic Studies, vol. 54, no. 1-2, 2017. 2017
B. Javed, S. M. M. R. Naqvi, A. K. Khan, S. Arjoon, and H. H. Tayyeb, “Impact of inclusive leadership on innovative work behavior: The role of psychological safety,” Journal of Management & Organization, pp. 1–20, 2017. 2017 0.539
B. Shabbir and S. M. M. Raza Naqvi, “Impact of workload and job complexity on employee job performance with the moderating role of social support and mediating role of job stress: A study of travel agencies in Rawalpindi, Islamabad and AJK,” Journal of Accounting and Marketing, vol. 6, no. 1, 2017. 2017 0.139
2016
Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Maxwell strata and conjugate points in the sub-Riemannian problem on the lie group SH(2),” Journal of Dynamical and Control Systems, vol. 22, no. 4, pp. 747–770, 2016. 2016 0.708
M. Ghafoor, I. A. Taj, and M. N. Jafri, “Fingerprint frequency normalisation and enhancement using two-dimensional short-time fourier transform analysis,” IET Com­puter Vision, vol. 10, no. 8, pp. 806–816, 2016. 2016 0.573
G. Murtaza, A. I. Bhatti, and Q. Ahmed, “Control-oriented model of atkinson cycle en­gine with variable intake valve actuation,” Journal of Dynamic Systems, Measurement, and Control, vol. 138, no. 6, pp. 1–9, 2016. 2016 1.339
I. Khan, A. I. Bhatti, A. Arshad, and Q. Khan, “Robustness and performance pa­rameterization of smooth second order sliding mode control,” International Journal of Control, Automation and Systems, vol. 14, no. 3, pp. 681–690, 2016. 2016 1.687
S. U. Ali, R. Samar, M. Z. Shah, A. I. Bhatti, K. Munawar, and U. M. Al-Sggaf, “Lateral guidance and control of UAVs using second-order sliding modes,” Aerospace Science and Technology, vol. 49, pp. 88–100, 2016. 2016 2.57
M. A. Z. Raja, R. Samar, E. S. Alaidarous, and E. Shivanian, “Bio-inspired comput­ing platform for reliable solution of Bratu-type equations arising in the modeling of electrically conducting solids,” Applied Mathematical Modelling, vol. 40, no. 11, pp. 5964–5977, 2016. 2016 2.291
S. J. Nawaz, M. I. Tiwana, M. Patwary, N. M. Khan, M. I. Tiwana, and A. H. Haseeb, “GA based sensing of sparse multipath channels with superimposed training sequence,” Elektronika ir Elektrotechnika, vol. 22, no. 1, pp. 87–91, 2016. 2016 0.859
S. M. Shah, R. Samar, N. M. Khan, and M. A. Z. Raja, “Fractional-order adaptive signal processing strategies for active noise control systems,” Nonlinear Dynamics, vol. 85, no. 3, pp. 1363–1376, 2016. 2016 3.464
M. Y. Wani, M. Riaz, and N. M. Khan, “Modeling and characterization of MIMO mobile-to-mobile communication channels using elliptical scattering geometry,” Wire­less Personal Communications, vol. 91, no. 2, pp. 509–524, 2016. 2016 0.951
M. S. Khan and N. M. Khan, “Low complexity signed response based sybil attack detection mechanism in wireless sensor networks,” Journal of Sensors, vol. 2016, 2016. 2016 1.734
T. Ahmed and N. M. Khan, “Direct radio frequency sampling methodology for multiple signals in an energy-sparse spectrum,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 24, no. 6, pp. 4637–4647, 2016. 2016 0.578
M. Riaz, M. Rehan, and M. Ashraf, “Synchronization of nonlinear master–slave systems under input delay and slope-restricted input nonlinearity,” Complexity, vol. 21, no. S1, pp. 220–233, 2016. 2016 4.621
S. J. Nawaz, N. M. Khan, and R. Ramer, “3-D spatial spread quantifiers for multipath fading wireless channels,” IEEE Wireless Communications Letters, vol. 5, no. 5, pp. 484–487, 2016. 2016 2.449
M. Sajid, I. A. Taj, U. I. Bajwa, and N. I. Ratyal, “The role of facial asymmetry in recognizing age-separated face images,” Computers & Electrical Engineering, vol. 54, pp. 255–270, 2016. 2016 1.57
M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and A. Raza, “An efficient inter pre­diction mode selection scheme for advanced video coding based on motion homogeneity and residual complexity,” IEEJ Transactions on Electrical and Electronic Engineering, vol. 11, no. 6, pp. 760–767, 2016. 2016 0.517
W. Abbasi et al., “Adaptive integral sliding mode stabilization of nonholonomic drift-free systems,” Mathematical Problems in Engineering, vol. 2016, 2016. 2016 0.802
Q. Khan, R. Akmeliawati et al., “Robust control of underactuated systems: Higher order integral sliding mode approach,” Mathematical Problems in Engineering, vol. 2016, 2016. 2016
K. A. Khaliq, A. Qayyum, and J. Pannek, “Synergies of advanced technologies and role of VANET in logistics and transportation,” International Journal of Advanced Computer Science and Applications, vol. 7, no. 11, pp. 359–369, 2016. 2016
S. Yasmin, R. N. Bin Rais, and A. Qayyum, “Resource aware routing in heterogeneous opportunistic networks,” International Journal of Distributed Sensor Networks, vol. 12, no. 1, p. 2907980, 2016. 2016 1.239
K. A. Khaliq, A. Qayyum, J. Pannek et al., “Wireless body area networks (WBAN): Architecture, applications and MAC protocols,” Abstract of Emerging Trends in Sci­entific Research, vol. 6, 2016. 2016
M. Riaz, M. M. Ahmed, and U. Munir, “An improved model for current voltage char­acteristics of submicron SiC MESFETs,” Solid-State Electronics, vol. 121, pp. 54–61, 2016. 2016 1.58
M. Ahmed, “No access multiple plastic hinge concept for high-rise reinforced-concrete core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, vol. 169, no. 9, pp. 688–701, 2016. 2016 0.424
R. Farooq, W. Ahmad, H. N. Hashmi, and Z. Saeed, “Computation of momentum transfer coefficient and conveyance capacity in asymmetric compound channel,” Ara­bian Journal for Science and Engineering, vol. 41, no. 10, pp. 4225–4234, 2016. 2016
M. Khan and M. Ali, “Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks,” Construction and Building Materials, vol. 125, pp. 800–808, 2016. 2016 3.169
M. Ali, “Use of coconut fibre reinforced concrete and coconut-fibre ropes for seismic-resistant construction,” Materiales de Construcci´on, vol. 66, no. 321, p. e073, 2016. 2016 1.343
I. Hassan, “Rainwater harvesting-an alternative water supply in the future for Pak­istan,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 8, no. 6, pp. 213–222, 2016. 2016 2.678
I. Hassan, A. R. Ghumman, and H. N. Hashmi, “Global warming and tempera­ture changes for Saudi Arabia,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 8, no. 1, pp. 179–191, 2016. 2016
A. Khalid, P. Kirisci, Z. Ghrairi, K.-D. Thoben, and J. Pannek, “A methodology to develop collaborative robotic cyber physical systems for production environments,” Logistics Research, vol. 9, no. 23, pp. 1–15, 2016. 2016
M. Umar, N. Khan, M. H. Agha, and M. Abbas, “SAP-ERP implementation: Change management model using qualitative approach,” International Journal of Computer Science and Network Security (IJCSNS), vol. 16, no. 6, pp. 9–13, 2016. 2016
L. A. K. Rayyan Azam Khan, Z. K. Farzan Majeed Noori, and A. Majeed, “Design and simulation of a sine wave inverter with PID control for nonlinear load applications,” International Journal of Innovation and Scientific Research, vol. 26, no. 2, pp. 672–683, 2016. 2016 3.917
R. A. K. Farzan Majeed Noori, Liaquat Ali Khan, “Cost effective recognition and classification of moving objects using simulink,” Journal of Scientific and Engineering Research, vol. 3, no. 5, pp. 174–182, 2016. 2016
M. M. Khan and N. A. Sheikh, “Identification and characterization of coherent struc­tures in gasoline injector nozzle flow using proper orthogonal decomposition,” Journal of Mechanical Science and Technology, vol. 30, no. 8, pp. 3673–3680, 2016. 2016 1.128
N. A. Sheikh, S. Manzoor, M. M. Khan, and M. Ali, “Hydrodynamic description of a vibrofluidized granular bed driven at high frequency,” The European Physical Journal Applied Physics, vol. 75, no. 3, p. 31101, 2016. 2016 0.684
U. Farooq, A. Nongaillard, Y. Ouzrout, and M. A. Qadir, “A feature-based reputation model for product evaluation,” International Journal of Information Technology & Decision Making, vol. 15, no. 06, pp. 1521–1553, 2016. 2016 1.406
U. Farooq, A. Nongaillard, Y. Ouzrout, and M. A. Qadir, “A multi source product reputation model,” Computers in Industry, vol. 83, pp. 55–67, 2016. 2016 2.691
K. Shaukat, T. Tariq, A. Junaid, M. A. Ahsan, K. Mehmood, and U. Shaukat, “KSD an efficient algorithm for association rule mining,” International Journal of Computer Science and Information Security, vol. 14, no. 5, p. 351, 2016. 2016
S. Ayaz and M. T. Afzal, “Identification of conversion factor for completing-h index for the field of mathematics,” Scientometrics, vol. 109, no. 3, pp. 1511–1524, 2016. 2016 2.147
M. Imran, M. T. Afzal, and M. A. Qadir, “Malware classification using dynamic fea­tures and hidden markov model,” Journal of Intelligent & Fuzzy Systems, vol. 31, no. 2, pp. 837–847, 2016. 2016 1.261
N. Sajid, M. T. Afzal, and M. Qadir, “Multi-label classification of computer science documents using fuzzy logic,” Journal of the National Science Foundation of Sri Lanka, vol. 44, no. 2, 2016. 2016 0.42
M. T. Ikram, N. A. Butt, and M. T. Afzal, “Open source software adoption evalua­tion through feature level sentiment analysis using Twitter data,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 24, no. 5, pp. 4481–4496, 2016. 2016 0.578
M. Aleem, M. A. Islam, and M. A. Iqbal, “A comparative study of heterogeneous processor simulators,” International Journal of Computer Applications, vol. 148, no. 12, 2016. 2016 3.12
A. Javed, B. Qamar, M. Jameel, A. Shafi, and B. Carpenter, “Towards scalable Java HPC with hybrid and native communication devices in MPJ express,” International Journal of Parallel Programming, vol. 44, no. 6, pp. 1142–1172, 2016. 2016 1.156
R. Ul-Islam, S. A. Haider, T. Abbas, and M. Ikram, “Matter-wave teleportation via cavity-field trans-pads,” Laser Physics Letters, vol. 13, no. 10, p. 105204, 2016. 2016 2.537
S. Ahmed and A. Nadeem, “A mobile agent based communication protocol to optimize message delivery cost,” Journal of Systems and Software, vol. 121, pp. 40–48, 2016. 2016 2.444
R. Bano, M. Ismail, A. Nadeem, M. H. Khan, and H. Rashid, “Potential risk factors for breast cancer in Pakistani women,” Asian Pacific Journal of Cancer Prevention, vol. 17, no. 9, pp. 4307–4312, 2016. 2016 1.24
S. A. Khan and A. Nadeem, “An empirical investigation on test data generation for coupling based integration testing,” Science International, vol. 28, no. 1, 2016. 2016 1.365
N. Farah, A. Mehdi, S. I. Soomro, N. I. Soomro, R. Tareb, N. Desmasures, J. P. Vernoux, S. M. Bakhtiar, and M. Imran, “Draft genome sequence of enterococcus mundtii QAUEM2808, isolated from dahi, a fermented milk product,” Genome an­nouncements, vol. 4, no. 5, pp. e00 995–16, 2016. 2016
R. Tabassum, M. Haseeb, and S. Fazal, “Structure prediction of outer membrane pro-tease protein of salmonella typhimurium using computational techniques,” Interna­tional Journal Bioautomation, vol. 20, no. 1, 2016. 2016
N. Farah, A. Mehdi, S. I. Soomro, N. I. Soomro, R. Tareb, N. Desmasures, J. P. Vernoux, S. M. Bakhtiar, and M. Imran, “Implementation of mathematical models for HCV infection,” Journal of Applied Environmental and Biological Sciences, vol. 6, no. 2S, pp. 109–113, 2016. 2016
H. A. Butt and S. M. Bakhtiar, “Identification and classification of bacterial auto-transporters,” Jurnal Teknologi, vol. 78, no. 4-3, pp. 47–51, 2016. 2016
H. Ismail, E. Dilshad, M. T. Waheed, M. Sajid, W. K. Kayani, and B. Mirza, “Transfor­mation of Lactuca sativa L. with rol C gene results in increased antioxidant potential and enhanced analgesic, anti-inflammatory and antidepressant activities in vivo,” 3 Biotech, vol. 6, no. 2, p. 215, 2016. 2016 1.361
W. K. Kayani, E. Dilshad, T. Ahmed, H. Ismail, and B. Mirza, “Evaluation of Ajuga bracteosa for antioxidant, anti-inflammatory, analgesic, antidepressant and anticoagu­lant activities,” BMC Complementary and Alternative Medicine, vol. 16, no. 1, p. 375, 2016. 2016 2.288
S. F. Ahmad, Z. Anwar, S. Hussain, M. Jehangir, I. Jehangir, A. Jamal, J. Z. K. Khattak, and A. Ali Khan, “A detailed report on the specific area based percentage and diagnostic methods of hepatitis C in Khyber Pakhtunkhwa, Pakistan,” Molecular and Biochemical Diagnosis (Journal), vol. 2, no. 1, pp. 51–64, 2016. 2016
K. M. Haroon, S. Hussain, R. Bano, H. Jamshed-Ul-Hassan, and U. R. M. Aadil, “Associations of most prevalent risk factors with lung cancer and their impact on survival length,” Asian Pacific Journal of Cancer Prevention, vol. 17, no. S3, pp. 65–70, 2016. 2016 1.24
A. Shaheen, S. Hussain, and S. Nadeem, “Physiological flow of jeffrey six constant fluid model due to ciliary motion,” Communications in Theoretical Physics, vol. 66, no. 6, p. 701, 2016. 2016 0.989
S. Kanwal and R. Ali, “A cryptosystem with noncommutative platform groups,” Neural Computing and Applications, pp. 1–6, 2016. 2016 2.505
S. Inam and R. Ali, “A new ElGamal-like cryptosystem based on matrices over groupring,” Neural Computing and Applications, pp. 1–5, 2016. 2016 2.505
M. Afzal, R. Nawaz, and A. Ullah, “Attenuation of dissipative device involving cou­pled wave scattering and change in material properties,” Applied Mathematics and Computation, vol. 290, pp. 154–163, 2016. 2016 1.738
A. R. Kashif, M. Shoaib, and M. A. Latif, “Applications and derivation of Ostrowski type inequalities for n-times differentiable functions for some efficint quadrature rules,” Science International, vol. 28, no. 3, 2016. 2016 1.365
A. R. Kashif, M. Shoaib, and M. A. Latif, “Improved version of perturbed Ostrowski type inequalities for n-times differ­entiable mappings with three-step kernel and its application,” Journal of Nonlinear Sciences and Applications, vol. 9, 2016. 2016
E. Karapinar, R. Ali, T. Kamran, and M. U. Ali, “Generalized multivalued rational type contractions,” Journal of Advanced Mathematical Studies, vol. 9, no. 6, pp. 26–36, 2016. 2016
T. Kamran, M. Postolache, A. Ghiura, S. Batul, and R. Ali, “The banach contraction principle in C∗-algebra-valued b-metric spaces with application,” Fixed Point Theory and Applications, vol. 2016, no. 1, 2016. 2016 0.971
S. Nadeem, A. Munim, A. Shaheen, and S. Hussain, “Physiological flow of Carreau fluid due to ciliary motion,” AIP Advances, vol. 6, no. 3, p. 035125, 2016. 2016 1.568
A. Akgul, S. Hussain, and I. Pehlivan, “A new three-dimensional chaotic system, its dynamical analysis and electronic circuit applications,” Optik-International Journal for Light and Electron Optics, vol. 127, no. 18, pp. 7062–7071, 2016. 2016 0.8335
T. Hussain, S. Hussain, and T. Hayat, “Impact of double stratification and magnetic field in mixed convective radiative flow of maxwell nanofluid,” Journal of Molecular Liquids, vol. 220, pp. 870–878, 2016. 2016 3.643
S. Hussain, K. Mehmood, and M. Sagheer, “MHD mixed convection and entropy gen­eration of water–alumina nanofluid flow in a double lid driven cavity with discrete heating,” Journal of Magnetism and Magnetic Materials, vol. 419, pp. 140–155, 2016. 2016 2.63
K. Mehmood, S. Hussain, and M. Sagheer, “Mixed convection flow with non-uniform heat source/sink in a doubly stratified magnetonanofluid,” AIP Advances, vol. 6, no. 6, p. 065126, 2016. 2016 1.568
S. Shah, S. Hussain, and M. Sagheer, “MHD effects and heat transfer for the UCM fluid along with joule heating and thermal radiation using cattaneo-christov heat flux model,” AIP Advances, vol. 6, no. 8, p. 085103, 2016. 2016 1.568
S. T. Hussain, Z. H. Khan, S. Nadeem et al., “Water driven flow of carbon nanotubes in a rotating channel,” Journal of Molecular Liquids, vol. 214, pp. 136–144, 2016. 2016 3.648
A. Noor, S. Bashir, and V. A. Earnshaw, “Bullying, internalized hepatitis (Hepati­tis C virus) stigma, and self-esteem: Does spirituality curtail the relationship in the workplace,” Journal of Health Psychology, vol. 21, no. 9, pp. 1860–1869, 2016. 2016 2.182
M. Sarmad and S. Bashir, “Impact of nurses personality on patients satisfaction; an occupational focus on spirituality at work as moderator,” Abasyn University Journal of Social Sciences, vol. 9, no. 1, pp. 69–85, 2016. 2016
M. H. Khan, A. Fraz, and A. Hassan, “The diversification puzzle: The role of asymmet­ric information and insider trading in Pakistan,” The Lahore Journal of Economics, vol. 21, no. 2, pp. 97–119, 2016. 2016
A. Fraz and A. Hassan, “Testing information efficiency using random walk model: Empirical evidence from Karachi stock exchange,” Journal of Managerial Sciences, vol. 10, no. 2, pp. 249–266, 2016. 2016
L. Saqib and M. A. Zafar, “A realistic approach to the concept of ijarah (leasing) in islamic finance and its possible role in the development of agricultural sector in Pakistan,” Hamdard Islamicus, vol. 2, no. 3, 2016. 2016
L. S. Behar-Horenstein, N. Isaac, C. N. Southwell, M. E. Hudson-Vassell, L. Niu, M. Pratto, K. W. Roberts, R. J. Wingfield, J. D. Wolfgang, and M. A. Zafar, “Promot­ing academic socialization through service learning experiences,” International Journal of Teaching and Learning in Higher Education, vol. 28, no. 2, pp. 158–167, 2016. 2016
I. Ahmed, M. A. Zafar, K. Shahzad, and K. Khan, “Understanding the concept of Cor­porate Social Responsibility (CSR): Attributions from islamic perspective,” Journal of Islamic Business and Management, vol. 6, no. 2, pp. 135–152, 2016. 2016
Z. Riaz and M. I. Khan, “Impact of service failure severity and agreeableness on con­sumer switchover intention: Mediating role of consumer forgiveness,” Asia Pacific Journal of Marketing and Logistics, vol. 28, no. 3, pp. 420–434, 2016. 2016 1.204
J. K. Khattak, M. R. Naqvi, and S. Muhammad, “Impact of consumer beliefs on beef buying intention in Pakistan: An application of the theory of planned behavior,” Abasyn University Journal of Social Sciences, vol. 9, no. 2, pp. 495–508, 2016. 2016
2015
M. A. Z. Raja, R. Samar, T. Haroon, and S. M. Shah, “Unsupervised neural network model optimized with evolutionary computations for solving variants of nonlinear MHD Jeffery-Hamel problem,” Applied Mathematics and Mechanics, vol. 36, no. 12, pp. 1611–1638, 2015. 2015 0.763
M. A. Z. Raja, J. A. Khan, A. M. Siddiqui, D. Behloul, T. Haroon, and R. Samar, “Exactly satisfying initial conditions neural network models for numerical treatment of first Painlev´e equation,” Applied Soft Computing, vol. 26, pp. 244–256, 2015. 2015 3.541
M. A. Z. Raja, J. A. Khan, S. M. Shah, R. Samar, and D. Behloul, “Comparison of three unsupervised neural network models for first Painlev´e Transcendent,” Neural Computing and Applications, vol. 26, no. 5, pp. 1055–1071, 2015. 2015 2.505
M. A. Z. Raja, M. A. Manzar, and R. Samar, “An efficient computational intelligence approach for solving fractional order riccati equations using ANN and SQP,” Applied Mathematical Modelling, vol. 39, no. 10, pp. 3075–3093, 2015. 2015 2.35
M. Asad, A. I. Bhatti, S. Iqbal, and Y. Asfia, “A smooth integral sliding mode controller and disturbance estimator design,” International Journal of Control, Automation and Systems, vol. 13, no. 6, pp. 1326–1336, 2015. 2015 1.523
A. A. Uppal, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Optimization and control of one dimensional packed bed model of underground coal gasification,” Journal of Process Control, vol. 35, pp. 11–20, 2015. 2015 2.7
M. Z. Shah, R. Samar, and A. I. Bhatti, “Guidance of air vehicles: A sliding mode approach,” IEEE Transactions on Control Systems Technology, vol. 23, no. 1, pp. 231–244, 2015. 2015 3.882
M. Z. Shah, R. Samar, and A. I. Bhatti, “Lateral track control of UAVs using the sliding mode approach: From design to flight testing,” Transactions of the Institute of Measurement and Control, vol. 37, no. 4, pp. 457–474, 2015. 2015 1.049
K. A. Khaliq, S. Hussain, A. Qayyum, and J. Pannek, “Novel data link layer encoding scheme for multi-hop wireless mesh network,” Procedia Computer Science, vol. 52, pp. 665–669, 2015. 2015
I. H. Syed and N. M. Khan, “MIMO–OFDM communication system with opportunistic diversity-order selection and KF-based channel estimation,” Wireless Personal Com­munications, vol. 84, no. 1, pp. 587–603, 2015. 2015 0.951
S. J. Nawaz, M. Riaz, N. M. Khan, and S. Wyne, “Temporal analysis of a 3D ellip­soid channel model for the vehicle-to-vehicle communication environments,” Wireless Personal Communications, vol. 82, no. 3, pp. 1337–1350, 2015. 2015 0.951
S. J. Nawaz, N. M. Khan, M. I. Tiwana, N. Hassan, and S. I. Shah, “Airborne internet access through submarine optical fiber cables,” IEEE Transactions on Aerospace and Electronic Systems, vol. 51, no. 1, pp. 167–177, 2015. 2015 1.975
M. Riaz, N. M. Khan, and S. J. Nawaz, “A generalized 3-D scattering channel model for spatiotemporal statistics in mobile-to-mobile communication environment,” IEEE Transactions on Vehicular Technology, vol. 64, no. 10, pp. 4399–4410, 2015. 2015 4.066
S. A. Moiz, H. Nasir, A. M. Nahhas, K. S. Karimov, and M. M. Ahmed, “Improved electrical response of MIS diode with disperse orange-25 as insulator deposited by centrifugal process,” Advances in Applied Science Research, vol. 6, no. 5, pp. 16–25, 2015. 2015 3.52
K. Karimov, M. M. Ahmed, F. Noshin, M. Saleem, M. Mahroof-Tahir, S. A. Moiz, K. M. Akhmedov, M. Zahid, S. Z. Abbas, and A. Rashid, “Nickel phthalocyanine based organic photo transistor: effect of semiconductor film thickness,” The European Physical Journal Applied Physics, vol. 72, no. 2, p. 20202, 2015. 2015 0.684
N. I. Ratyal, I. A. Taj, U. I. Bajwa, and M. Sajid, “3D face recognition based on pose and expression invariant alignment,” Computers & Electrical Engineering, vol. 46, pp. 241–255, 2015. 2015 1.57
M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and M. Tahir, “A hybrid scheme based on pipelining and multitasking in mobile application processors for advanced video coding,” Scientific Programming, vol. 2015, p. 22, 2015. 2015 0.224
I. Hassan and A. R. Ghumman, “Application of civil engineering softwares for down-scaling GCM results,” International Invention Journal of Engineering Science and Technology, vol. 2, no. 1, pp. 1–9, 2015. 2015
M. Ahmed, S. Tayyaba, and M. W. Ashraf, “Effect of buckling restrained braces loca­tions on seismic responses of high-rise RC core wall buildings,” Shock and Vibration, vol. 2016, 2015. 2015 1.281
F. Qamar and M. Ali, “Modification of traditional supporting steelwork system for non-standard structures,” Engineering Structures, vol. 96, pp. 153–159, 2015. 2015 2.258
R. D. Evans, M. Rafique, M. Agha et al., “Exploring the required success factors for de­veloping absorptive capacity in knowledge intensive organisations,” The International Technology Management Review, vol. 5, no. 3, pp. 125–134, 2015. 2015
M. Rafique, R. D. Evans, M. T. Nawaz, and M. H. Agha, “Should organisations com­pete or collaborate when absorbing new external knowledge?” International Journal of Advanced Corporate Learning, vol. 8, no. 3, pp. 4–10, 2015. 2015
W. Rehmat, I. Aaltio, M. H. Agha, and H. R. Khan, “Is training effective? Evaluating training effectiveness in call centers,” EJBO: Electronic Journal of Business Ethics and Organization Studies, vol. 20, no. 1, 2015. 2015
S. Khan and M. A. Qadir, “Inter-path OOS packets differentiation based congestion control for simultaneous multipath transmission,” International Arab Journal of In­formation Technology, 2015. 2015 0.724
K. Shaukat, N. Masood, S. Mehreen, and U. Azmeen, “Dengue fever prediction:A data mining problem,” Journal of Data Mining in Genomics & Proteomics, vol. 2015, 2015. 2015 1.16
A. Shahid, M. T. Afzal, and M. A. Qadir, “Lessons learned: The complexity of accu­rate identification of in-text citations.” The International Arab Journal of Information Technology (IAJIT), vol. 12, no. 5, pp. 481–488, 2015. 2015 0.065
A. Hussain, S. Sattar, and M. T. Afzal, “Literature review on feature identification in sentiment analysis,” International Journal of Computer Applications, vol. 132, no. 3, pp. 22–27, 2015. 2015
S. Ur Rehman and A. Nadeem, “An approach to model based testing of multiagent systems,” The Scientific World Journal, vol. 2015, 2015. 2015 1.219
A. Munir, S. Azam, and S. Fazal, “Repositioning of methotrexate to cure mutations of DYR, TYMS and PURA Gene, Bleomycin in the treatment of mutant DNA, TOPa, POLa, and RIR genes,” Merit Research Journal of Medicine and Medical Sciences, vol. 3, p. 7, 2015. 2015 1.257
M. Nisar, N. Noureen, S. Fazal, and M. A. Qadir, “MCaVoH: A toolkit for mining, clas­sification and visualization of human microbiota,” Journal of Microbiological Methods, vol. 117, pp. 28–35, 2015. 2015 1.857
M. S. Khan and S. Fazal, “Advanced modelling and functional characterization of B2 bradykinin receptor,” International Journal Bioautomation, vol. 19, no. 2, 2015. 2015
N. Noureen, M. Touseef, S. Fazal, and M. A. Qadir, “ChromClust: A semi-supervised chromatin clustering toolkit for mining histone modifications interplay,” Genomics, vol. 106, no. 6, pp. 355–359, 2015. 2015 2.386
S. M. B. Shifa Tariq Ashraf, “Exploring the protein interaction related to hepatitus C virus,” NUST Journal of Natural Sciences, vol. 3, no. 1, pp. 13–18, 2015. 2015
M. B. Amjad Ali and V. Azevedo, “Autism Spectrum Disorders (ASD): From diagnosis to management,” Journal of Molecular and Genetic Medicine, 2015 2015 1.2
S. M. Bakhtiar, A. Ali, and D. Barh, “Epigenetics in head and neck cancer,” Can­cer Epigenetics: Risk Assessment, Diagnosis, Treatment, and Prognosis, pp. 751–769, 2015. 2015
M. Haseeb and S. Hussain, “Pharmacophore development for anti-lung cancer drugs,” Asian Pacific Journal of Cancer Prevention, vol. 16, no. 18, pp. 8307–8311, 2015. 2015 1.24
M. T. Muhammad Bilal, H. S. Khan, and H. Tariq Zeb, “Antimicrobial activity of ethanol and ethyl acetate extracts of roots adiantum capillus-veneris,” Journal of Rashid Latif Medical College, vol. 4, no. 1, pp. 39–44, 2015. 2015
S. M. B. Shifa Tariq Ashraf, “Exploring the protein interaction related to hepatitus,” NUST Journal of Natural Sciences, vol. 3, no. 1, pp. 13–18, 2015. 2015
A. U. Tariq, M. H. Khan, S. Hussain, R. Bano, and A. Navid, “In silico characteri­zation of genetic alterations associated with mal de meleda,” International Journal of Sciences: Basic and Applied Research, vol. 19, no. 2, pp. 65–76, 2015. 2015 0.246
T. Kamran et al.,“C∗-valued G-contractions and fixed points,” Journal of Inequalities and Applications, vol. 2015, no. 1, p. 304, 2015. 2015 0.63
M. Ramzan and M. Bilal, “Time dependent MHD nano-second grade fluid flow induced by permeable vertical sheet with mixed convection and thermal radiation,” PloS One, vol. 10, no. 5, p. e0124929, 2015. 2015 4.411
T. Kamran, R. Ali, and S. Sultan, “Generalized multivalued integral type weak con­tractions,” Journal of Advanced Mathematical Studies, vol. 8, no. 1, pp. 115–120, 2015. 2015
S. Batul and T. Kamran, “C∗-valued contractive type mapping,” Journal of Advanced Mathematical Studies, vol. 2015, no. 142, pp. 1–9, 2015. 2015
S. Hussain, Z. Abidin, and C. G. Petrov, “Time discretization scheme for the solutions of the chen system,” Journal of Computational and Nonlinear Dynamics, vol. 10, no. 6, pp. 1–7, 2015. 2015 1.233
S. Nadeem, A. Shaheen, and S. Hussain, “Physiological breakdown of Jeffrey six con­stant nanofluid flow in an endoscope with nonuniform wall,” AIP Advances, vol. 5, no. 12, pp. 1–16, 2015. 2015 1.444
M. M. Hassan, S. Bashir, and P. Mussel, “Personality, learning, and the mediating role of epistemic curiosity: A case of continuing education in medical physicians,” Learning and Individual Differences, vol. 42, pp. 83–89, 2015. 2015 1.65
M. Z. Mirza and S. Bashir, “Workers’9/11 in Pakistan: Neglected sparks causing confla­gration,” International Journal of Occupational Safety and Ergonomics, vol. 21, no. 3, pp. 405–410, 2015. 2015 0.469
T. Tahir and A. Fraz, “Human capital, capital structure, employee pay: Empirical evi­dence from Pakistan,” Global Journal of Management And Business Research, vol. 15, no. 9, pp. 1–23, 2015. 2015 1.203
S. M. M. R. Naqvi and S. Bashir, “IT-expert retention through organizational com­mitment: A study of public sector information technology professionals in Pakistan,” Applied Computing and Informatics, vol. 11, no. 1, pp. 60–75, 2015. 2015 1.204
2014
A. Rasheed, S. Ajmal, and A. Qayyum, “Adaptive routing update approach for VANET using local neighbourhood change information,” Malaysian Journal of Computer Sci­ence, vol. 27, no. 4, 2014. 2014 0.476
A. Rasheed, S. Ajmal, and A. Qayyum, “Protocol independent adaptive route update for VANET,” The Scientific World Journal, vol. 2014, 2014. 2014 1.203
M. S. Akbar, M. S. Khan, K. A. Khaliq, A. Qayyum, and M. Yousaf, “Evaluation of IEEE 802.11n for multimedia application in VANET,” Procedia Computer Science, vol. 32, pp. 953–958, 2014. 2014
T. Saraj, M. Yousaf, S. Akbar, A. Qayyum, and M. Tufail, “Isp independent archi­tecture (iia) for ipv6 packet traversing and inter-connectivity over hybrid (ipv4/ipv6) internet,” Procedia Computer Science, vol. 32, pp. 973–978, 2014. 2014
K. A. Khaliq, M. S. Akbar, A. Qayyum, E. Elahi, and A. Zaheer, “Congestion avoid­ance hybrid wireless mesh protocol (CA-HWMP) for IEEE 802.11s,” Procedia Com­puter Science, vol. 32, pp. 229–236, 2014. 2014
S. Naz, T. Siraj, M. S. Akbar, M. Yousaf, A. Qayyum, and M. Tufail, “Performance analysis of IPv6 QoS for multimedia applications using real testbed,” Procedia Com­puter Science, vol. 32, pp. 182–189, 2014. 2014
S. Ajmal, A. Rasheed, A. Qayyum, and A. Hasan, “Classification of VANET MAC, routing and approaches: A detailed survey,” Journal of Universal Computer Science, vol. 20, no. 4, pp. 462–487, 2014. 2014 0.698
M. Ghafoor, I. A. Taj, W. Ahmad, and N. M. Jafri, “Efficient 2-fold contextual filtering approach for fingerprint enhancement,” IET Image Processing, vol. 8, no. 7, pp. 417– 425, 2014. 2014 1.04
M. Raza, G. Ahmed, and N. Khan, “Power control-based GRACE (PC-GRACE) rout­ing protocol for wireless sensor networks,” Journal of Networking Technology, vol. 5, no. 4, pp. 137–144, 2014. 2014
Q. Khan, A. I. Bhatti, and A. Ferrara, “Dynamic sliding mode control design based on an integral manifold for nonlinear uncertain systems,” Journal of Nonlinear Dynamics, vol. 2014, pp. 1–10, 2014. 2014 3.464
M. Pervaiz, Q. Khan, A. I. Bhatti, and S. A. Malik, “Dynamical adaptive integral slid­ing backstepping control of nonlinear nontriangular uncertain systems,” Mathematical Problems in Engineering, vol. 2014, pp. 1–14, 2014. 2014 0.802
M. A. Akram, M. A. Rizvi, A. I. Bhatti, and N. Messai, “Mode identification for hybrid model of SI engine to detect misfire fault,” Journal of Control Engineering and Applied Informatics, vol. 16, no. 3, pp. 65–74, 2014. 2014 0.696
A. A. Uppal, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Control oriented modeling and optimization of one dimensional packed bed model of underground coal gasification,” Journal of Process Control, vol. 24, no. 1, pp. 269–277, 2014. 2014 2.7
M. Pervaiz, Q. Khan, A. I. Bhatti, and S. A. Malik, “Output tracking via adaptive backstepping higher order integral sliding mode for uncertain nonlinear systems,” Dis­crete Dynamics in Nature and Society, vol. 2014, pp. 1–10, 2014. 2014 0.711
Q. Khan and A. I. Bhatti, “Robust dynamic integral sliding mode for MIMO nonlinear systems operating under matched and unmatched uncertainties,” Journal of Control Engineering and Applied Informatics, vol. 16, no. 4, pp. 107–117, 2014. 2014 0.696
N. Mehdi, M. Rehan, F. M. Malik, A. I. Bhatti, and M. Tufail, “A novel anti-windup framework for cascade control systems: An application to underactuated mechanical systems,” ISA Transactions, vol. 53, no. 3, pp. 802–815, 2014. 2014 3.394
Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Extremal trajectories and Maxwell strata in sub-Riemannian problem on group of motions of pseudo-Euclidean plane,” Journal of Dynamical and Control Systems, vol. 20, no. 3, pp. 341–364, 2014. 2014 0.708
M. A. R. Anjum and M. M. Ahmed, “A new approach for inversion of large random matrices in massive MIMO systems,” PloS One, vol. 9, no. 4, pp. 1–7, 2014. 2014 2.806
M. H. Zaheer, M. Rehan, G. Mustafa, and M. Ashraf, “Delay-range-dependent chaos synchronization approach under varying time-lags and delayed nonlinear coupling,” ISA Transactions, vol. 53, no. 6, pp. 1716–1730, 2014. 2014 3.394
M. A. Z. Raja, R. Samar, and M. M. Rashidi, “Application of three unsupervised neural network models to singular nonlinear BVP of transformed 2D Bratu equation,” Neural Computing and Applications, vol. 25, no. 7-8, pp. 1585–1601, 2014. 2014 2.505
M. Z. Shah, M. K. Ozgoren, and R. Samar, “3D guidance of unmanned aerial vehi­cles using sliding mode approach,” World Academy of Science, Engineering and Tech­nology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 8, no. 10, pp. 1705–1711, 2014. 2014 0.708
S. M. Shah, R. Samar, S. M. R. Naqvi, and J. A. Chambers, “Fractional order con­stant modulus blind algorithms with application to channel equalisation,” Electronics Letters, vol. 50, no. 23, pp. 1702–1704, 2014. 2014 1.155
M. A. Z. Raja, R. Samar et al., “Solution of the 2-dimensional Bratu problem using neural network, swarm intelligence and sequential quadratic programming,” Neural Computing and Applications, vol. 25, no. 7-8, pp. 1723–1739, 2014. 2014 2.505
M. A. Z. Raja and R. Samar, “Numerical treatment for nonlinear MHD Jeffery–Hamel problem using neural networks optimized with interior point algorithm,” Neurocom­puting, vol. 124, pp. 178–193, 2014. 2014 3.317
M. A. Z. Raja and R. Samar, “Numerical treatment of nonlinear MHD Jeffery–Hamel problems using stochas­tic algorithms,” Computers & Fluids, vol. 91, pp. 28–46, 2014. 2014 2.313
M. Riaz, M. Rehan, K.-S. Hong, M. Ashraf, and H. U. Rasheed, “Static and adap­tive feedback control for synchronization of different chaotic oscillators with mutually Lipschitz nonlinearities,” Chinese Physics B, vol. 23, no. 11, p. 110502, 2014. 2014 1.233
J.-G. Lee, U. A. Khan, J.-S. Hwang, J.-K. Seong, W.-J. Shin, B.-B. Park, and B.-W. Lee, “Assessment on the influence of resistive superconducting fault current limiter in VSC-HVDC system,” Physica C: Superconductivity and its Applications, vol. 504, pp. 163–166, 2014. 2014 1.404
U. Rafique and S. A. Ali, “Ultra-wideband patch antenna for K-band applications,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 12, no. 12, pp. 8252–8256, 2014. 2014
Z. Tang, M. Ali, and N. Chouw, “Residual compressive and shear strengths of novel coconut-fibre-reinforced-concrete interlocking blocks,” Construction and Building Ma­terials, vol. 66, pp. 533–540, 2014. 2014 3.169
M. Ali, “Seismic performance of coconut-fibre-reinforced-concrete columns with dif­ferent reinforcement configurations of coconut-fibre ropes,” Construction and Building Materials, vol. 70, pp. 226–230, 2014. 2014 3.169
N. Sharif, M. T. Afzal, and D. Helic, “Learning management systems: A need for specialized systems,” Transaction on Internet Research, Special Issue, vol. 10, no. 2, pp. 44–47, 2014. 2014
S. Ur Rehman, A. F. Haider, M. T. Afzal, and M. Asghar, “Measuring the relevance between tags and citations in social web,” Research Journal of Applied Sciences, En­gineering and Technology, vol. 7, no. 24, pp. 5172–5178, 2014. 2014
M. T. Khan et al., “CYP3A5 polymorphism and the risk of cancer: A metaanalysis,” European Scientific Journal, vol. 10, no. 30, 2014. 2014
A. A. Haider, A. Nadeem, and S. Rafiq, “Multiple objective test suite optimization: A fuzzy logic based approach,” Journal of Intelligent & Fuzzy Systems, vol. 27, no. 2, pp. 863–875, 2014. 2014 1.004
M. Haseeb, S. Vaqar, S. Fazal, and A. Khalil, “Ligand based pharmacophore develop­ment for colorectal cancer drugs,” Professional Medical Journal, vol. 21, no. 5, 2014. 2014
U. Shaukat, M. Toor, B. Ahmad, S. Fazal, and N. Mehmood, “Genetic and com­putational analysis of Tgfb1 & Fgfr2 polymorphism in correlation to breast cancer susceptibility in Pakistani women,” Journal of Cancer Science and Therapy, vol. 6, pp. 433–439, 2014. 2014 3.09
S. M. Bakhtiar, A. Ali, S. M. Baig, D. Barh, A. Miyoshi, and V. Azevedo, “Identifying human disease genes: advances in molecular genetics and computational approaches,” Genetics and Molecular Research, vol. 13, no. 3, pp. 5073–5087, 2014. 2014 0.775
F. Usman, B. Ahmad, and S. Hussain, “Institutional based prevalence of ischemic heart disease in Khyber Pakhtunkhwa Pakistan,” Journal of Rashid Latif Medical College, vol. 1, pp. 01–05, 2014. 2014
S. Zeb, S. Rehman, M. S. Khan, and H. S. Fazal, S and, “Parkinson’s disease mech­anisms and its treatment,” Journal of Rashid Latif Medical College, vol. 3, no. 1, pp. 49–53, 2014. 2014
S. Hussain, F. K. Bakhtiar, and M. H. Khan, “A bayesian meta-analysis and systematic review on global and local prevalence of hepatitis B,” International Journal of Scientific Research and Management, vol. 2, no. 12, pp. 1846–1855, 2014. 2014 4.009
S. Hussain, “Hepatitis B: A global burden,” International Journal of Novel Research in Life Sciences, vol. 1, no. 1, pp. 24–30, 2014. 2014
S. Hussain, “A common genetic disorder “deafness”,” International Journal of Novel Re­search in Life Sciences, vol. 1, no. 1, pp. 31–37, 2014. 2014
S. Hussain, M. H. Khan, M. T. Khan, S. Zeb, M. Haseeb, and A. U. Tariq, “Association of gjb2 gene mutations with non syndromic autosomal recessive deafness in different populations of the world,” International Journal of Basic and Applied Sciences, vol. 3, no. 4, p. 521, 2014. 2014
M. T. Khan, S. S. B. Khan, and S. Hussain, “Study of antimicrobial activity of garlic extracts against foodborne pathogens and its comparison with garlic oil and different antibiotics,” Pakistan Journal of Clinical and Biomedical Research, vol. 2, no. 1, pp. 33–37, 2014. 2014
M. Fatima, O. Khan, and S. Hussain, “Antimicrobial activity of citrus lemon against food borne pathogens,” Pakistan Journal of Clinical and Biomedical Research, vol. 2, no. 1, pp. 27–32, 2014. 2014
S. Hussain, F. Schieweck, and S. Turek, “Efficient Newton-multigrid solution techniques for higher order space–time Galerkin discretizations of incompressible flow,” Applied Numerical Mathematics, vol. 83, pp. 51–71, 2014. 2014 1.221
S. Ahmad, S. Hussain, A. A. Siddiqui, A. Ali, and M. Aqeel, “Application of Fourier transform to MHD flow over an accelerated plate with partial-slippage,” AIP Advances, vol. 4, no. 6, pp. 1–10, 2014. 2014 1.414
Z. Hassan, Z. Saleem, A. A. Rajput et al., “The mediating role of employee engagement between the relationship of distributive justice and organizational citizenship behav­ior: Empirical evidence from aviation sector of Pakistan,” International Journal of Management Sciences, vol. 2, no. 11, pp. 494–500, 2014. 2014 4.136
A. A. Rajput and S. H. Kalhoro, “The impact of macro factors entrepreneur, innovation and opportunity on entrepreneurial success of SMEs,” Middle-East Journal of Scientific Research, vol. 20, no. 2, pp. 149–161, 2014. 2014
F. Hanif and S. M. M. R. Naqvi, “Analysis of work family conflict in view of nurses,” Health Sector of Pakistan: International Journal of Gender and Women Studies, vol. 2, no. 4, pp. 103–116, 2014. 2014
2013
M. A. Z. Raja, R. Samar et al., “Neural network optimized with evolutionary comput­ing technique for solving the 2-dimensional Bratu problem,” Neural Computing and Applications, vol. 23, no. 7-8, pp. 2199–2210, 2013. 2013 2.505
R. Samar, M. Z. Shah, and M. Nzar, “Lateral control implementation for an unmanned aerial vehicle,” ISRN Aerospace Engineering, vol. 2013, pp. 1–14. 2013
S. Naz, M. Naeem, and A. Qayyum, “Performance evaluation of index schemes for semantic cache,” International Journal of Information Technology and Computer Sci­ence, vol. 5, no. 4, pp. 40–46, 2013. 2013
S. Gillani, M. Naeem, R. Habibullah, and A. Qayyum, “Semantic schema matching using DBpedia,” International Journal of Intelligent Systems and Applications, vol. 5, no. 4, pp. 72–80, 2013. 2013 2.313
U. I. Bajwa, I. A. Taj, M. W. Anwar, and X. Wang, “A multifaceted independent performance analysis of facial subspace recognition algorithms,” PloS One, vol. 8, no. 2, pp. 1–12, 2013. 2013 2.806
M. Ajab, I. A. Taj, I. Shafi, and S. Stankovic, “A new form of Gabor Wigner Trans­form by adaptive thresholding in Gabor Transform and Wigner distribution and the power of signal synthesis techniques to enhance the strengths of GWT,” Metrology and Measurement Systems, vol. 20, no. 1, pp. 99–106, 2013. 2013 1.598
M. Riaz, S. J. Nawaz, and N. M. Khan, “3D ellipsoidal model for mobile-to-mobile radio propagation environments,” Wireless Personal Communications, vol. 72, no. 4, pp. 2465–2479, 2013. 2013 0.951
Z. M. Loni and N. M. Khan, “Analysis of fading statistics in cellular mobile commu­nication systems,” The Journal of Supercomputing, vol. 64, no. 2, pp. 295–309, 2013. 2013 1.326
Q. Ahmed, A. I. Bhatti, M. A. Rizvi, and M. Raza, “Gasoline engine air filter health monitoring by second-order sliding modes,” International Journal of Adaptive Control and Signal Processing, vol. 27, no. 6, pp. 447–461, 2013. 2013 1.708
S. Hussain, A. Bhatti, A. Samee, and S. H. Qaiser, “Estimation of reactivity and average fuel temperature of a pressurized water reactor using sliding mode differentiator observer,” IEEE Transactions on Nuclear Science, vol. 60, no. 4, pp. 3025–3032, 2013. 2013 1.171
Q. R. Butt, A. I. Bhatti, M. R. Mufti, M. A. Rizvi, and I. Awan, “Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer,” Simulation Modelling Practice and Theory, vol. 32, pp. 138–154, 2013. 2013 1.954
S. Hussain, A. I. Bhatti, A. Samee, and S. H. Qaiser, “Estimation of precursor density of a power reactor using uniform second order sliding mode observer,” Annals of Nuclear Energy, vol. 54, pp. 233–239, 2013. 2013 1.312
Q. Ahmed, A. I. Bhatti, Q. Khan, and M. Raza, “Condition monitoring of gasoline engine air intake system using second order sliding modes,” International Journal of Vehicle Design, vol. 62, no. 2-4, pp. 312–332, 2013. 2013 0.713
A. Arshad, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Optimization of 1-D packed bed model of underground coal gasification,” Optimization, no. 1/52, 2013. 2013 0.943
M. Naeem, S. Gillani, M. A. Qadir, and S. Asghar, “gSemSim: Semantic similarity measure for intra gene ontology terms,” International Journal of Information Technol­ogy and Computer Science (IJITCS), pp. 32–40, 2013. 2013
M. Naeem, M. B. Khan, and M. T. AFzal, “Expertise discovery: A web mining ap­proach,” Journal of AI and Data Mining, pp. 35–47, 2013. 2013 0.1266
N. A. Sajid, M. T. Afzal, M. A. Qadir, and S. A. Khan, “The insights of classification schemes,” Sindh University Research Journal (SURJ), vol. 46, 2013. 2013
N. A. Sajid, S. Asghar, M. Afzal, and T. Ali, “Fuzzy based document classification,” Proceeding of the Pakistan Academy of Sciences, vol. 51, no. 2, 2013. 2013
I. A. Qureshi and A. Nadeem, “GUI testing techniques: A survey,” International Journal of Future Computer and Communication, vol. 2, no. 2, p. 142, 2013. 2013
A. A. Haider and A. Nadeem, “A survey of safety analysis techniques for safety critical systems,” International Journal of Future Computer and Communication, vol. 2, no. 2, p. 134, 2013. 2013
A. A. Haider and A. Nadeem, “Formal modelling languages to specify real-time systems: A survey,” Interna­tional Journal of Future Computer and Communication, vol. 2, no. 2, p. 130, 2013. 2013
S. Bilal, S. B. Ali, S. Fazal, and A. Mir, “Generation of a 3d model for human cereblon using comparative modelling,” Journal of Bioinformatics and Sequence Analysis, vol. 5, no. 1, pp. 10–15, 2013. 2013
M. H. Khan, S. Fazal, R. Bano, and H. Rashid, “A miracle if restored, p53,” African Journal of Biotechnology, vol. 12, no. 24, pp. 3745–3751, 2013. 2013 0.573
A. Kanwal, S. Fazal, S. Asghar, and M. Naeem, “MODY GENES, linkage analysis and subgroup discovery from text documents,” Professional Medical Journal, vol. 20, no. 4, 2013. 2013
A. Kanwal, S. Fazal, S. Asghar, and M. Naeem, “Subgroup discovery of the MODY GENES,” Professional Medical Journal, vol. 20, no. 5, 2013. 2013
R. Mahmood and S. Hussain, “Galerkin discretizations of 4th order in space and time for the convection-diffusion-reaction (CoDiRe) equation,” International Journal of Ba­sic & Applied Sciences, vol. 13, no. 4, pp. 1–12, 2013. 2013
S. Bashir and M. Nasir, “Breach of psychological contract, organizational cynicism and union commitment: A study of hospitality industry in Pakistan,” International Journal of Hospitality Management, vol. 34, pp. 61–65, 2013. 2013 2.757
M. A. Khattak, N. Iqbal, A. A. Rajut et al., “Impact of culture on the employee perfor­mance: A comparison of private and public sector universities,” International Journal of Academic Research in Accounting, Finance and Management Sciences, vol. 3, no. 1, pp. 210–218, 2013. 2013
N. Jamal and A. Fraz, “Relationship of single stock futures with the spot price: Ev­idence from Karachi stock exchange,” Research Journal of the Institute of Business Administration Karachi-Pakistan, vol. 8, no. 1, pp. 52–76, 2013. 2013
S. Naqvi, M. Ishtiaq, N. Kanwal, M. U. Butt, and S. Nawaz, “Impact of gender diversity on team performance: The moderating role of organizational culture in telecom sector of Pakistan,” Asian Journal of Social Sciences & Humanities, vol. 2, no. 4, pp. 228–235, 2013. 2013
S. M. M. R. Naqvi, N. Kanwal, M. Ishtiaq, and M. U. Butt, “Impact of corporate social responsibility on organizational performance of tobacco industry of Pakistan with moderating role of business ethics,” International Journal of Management Sciences and Business Research, vol. 2, no. 9, pp. 23–27, 2013. 2013 3.274
S. M. M. R. Naqvi, N. Kanwal, M. Ishtiaq, M. Ali et al., “Impact of job autonomy on organizational commitment: Moderating role of job satisfaction in tobacco industry of Pakistan,” Far East Journal of Psychology and Business, vol. 12, no. 5, pp. 57–72, 2013. 2013
S. R. Naqvi, M. Ishtiaq, N. Kanwal, and M. Ali, “Impact of job autonomy on organiza­tional commitment and job satisfaction: The moderating role of organizational culture in fast food sector of Pakistan,” International Journal of Business and Management, vol. 8, no. 17, pp. 92–102, 2013. 2013
S. M. M. R. Naqvi, M. Ishtiaq, N. Kanwal, M. Ali, and I. S, “Impact of corporate social responsibility on brand image in different FMCGs of Pakistan,” Interdisciplinary Journal of Contemporary Research In Business, vol. 5, no. 1, pp. 79–93, 2013. 2013
S. M. M. R. Naqvi, F. Malik, and Q. Mahmood, “The impact of promotions, recog­nition, autonomy and pay incentives on job satisfaction: A case of banking sector employees in Pakistan,” European Journal of Business Management, vol. 5, no. 5, pp. 187–193, 2013. 2013 7.17
S. Jawaid, A. A. Rajput, and S. M. M. R. Naqvi, “Impact of celebrity endorsement on teenager impulsive buying behavior,” Interdisciplinary Journal of Contemporary Research in Business, vol. 4, no. 10, pp. 1071–1080, 2013. 2013
2012
Q. Khan, A. I. Bhatti, M. Iqbal, and Q. Ahmed, “Dynamic integral sliding mode control for SISO uncertain nonlinear systems,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 7, pp. 4621–4633, 2012. 2012
I. H. Kazmi and A. I. Bhatti, “Parameter estimation of proton exchange membrane fuel cell system using sliding mode observer,” International Journal of Innovative Comput­ing, Information and Control, vol. 8, no. 7B, pp. 5137–5148, 2012. 2012
S. H. Qaiser, M. Iqbal, A. I. Bhatti, R. Samar, and J. Qadir, “Estimation of reactivity in a research reactor by using a second-order sliding mode observer,” Nuclear Science and Engineering, vol. 172, no. 3, pp. 327–336, 2012. 2012 0.822
P. A. Shah, M. Yousaf, A. Qayyum, and H. B. Hasbullah, “Performance compari­son of end-to-end mobility management protocols for TCP,” Journal of Network and Computer Applications, vol. 35, no. 6, pp. 1657–1673, 2012. 2012 3.5
S. Naz, Y. Majeed, and A. Qayyum, “Automatic translation of heterogeneous data models,” International Journal of Computer and Communication Engineering, vol. 1, no. 1, pp. 35–38, 2012. 2012
M. Yousaf, A. Qayyum, and S. A. Malik, “An architecture for exploiting multihoming in mobile devices for vertical handovers & bandwidth aggregation,” Wireless Personal Communications, vol. 66, no. 1, pp. 57–79, 2012. 2012 0.951
M. Rafiq, S.-U. Rehman, F.-U. Rehman, Q. R. Butt, and I. Awan, “A second order sliding mode control design of a switched reluctance motor using super twisting algo­rithm,” Simulation Modelling Practice and Theory, vol. 25, pp. 106–117, 2012. 2012 1.954
U. I. Bajwa, I. A. Taj, and M. W. Anwar, “A unified classifier for robust face recognition based on combining multiple subspace algorithms,” Optics Communications, vol. 285, no. 21, pp. 4324–4332, 2012. 2012 1.588
M. Ajab, I. A. Taj, and N. A. Khan, “Comparative analysis of variants of Gabor-Wigner transform for cross-term reduction,” Metrology and Measurement Systems, vol. 19, no. 3, pp. 499–508, 2012. 2012 1.203
Q. Ahmed, A. Iqbal, I. Taj, and K. Ahmed, “Gasoline engine intake manifold leakage diagnosis/prognosis using hidden Markov model,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 7, pp. 4661–4674, 2012. 2012
M. Touseef, M. Aziz-ul Haq, U. Rafique, M. A. Khan, M. M. Ahmed et al., “Genetic algorithm optimization of log-periodic dipole array,” International Journal of Electro­magnetics and Applications, vol. 2, no. 6, pp. 169–173, 2012. 2012
U. Rafique, S. A. Ali, M. T. Afzal, and M. Abdin, “Bandstop filter design for GSM shielding using Frequency Selective Surfaces,” International Journal of Electrical and Computer Engineering, vol. 2, no. 6, pp. 846–850, 2012. 2012
I. A. Sajid, S. G. Ziavras, and M. M. Ahmed, “Efficient face recognition using frequency distribution curve matching,” IET Image Processing, vol. 6, no. 8, pp. 1161–1169, 2012,. 2012 1.244
I. A. Sajid, M. M. Ahmed, and M. Sagheer, “An optimized face recognition system using stable orthogonalization,” International Journal of Innovative Computing, In­formation and Control, vol. 8, no. 1A, pp. 219–32, 2012. 2012
M. Abdin, U. Rafique, F. Malik, S. Qasim, M. A. Khan, and M. M. Ahmed, “A novel dual-band frequency selective surface absorber,” International Journal of Electromag­netics and Applications, vol. 2, no. 6, pp. 182–185, 2012. 2012
M. Aziz-ul Haq, M. T. Afzal, U. Rafique, M. A. Khan, M. M. Ahmed et al., “Log peri­odic dipole antenna design using particle swarm optimization,” International Journal of Electromagnetics and Applications, vol. 2, no. 4, pp. 65–68, 2012. 2012
S. J. Nawaz, K. I. Ahmed, M. N. Patwary, and N. M. Khan, “Superimposed training-based compressed sensing of sparse multipath channels,” IET Communications, vol. 6, no. 18, pp. 3150–3156, 2012. 2012 1.061
R. Samar and W. A. Kamal, “Optimal path computation for autonomous aerial vehi­cles,” Cognitive Computation, vol. 4, no. 4, pp. 515–525, 2012. 2012 3.441
I. Ghalib, M. H. Agha, S. Hameed, and M. A. Choudhary, “A survey of lean imple­mentation gap analysis in public sector organizations,” Life Science Journal, vol. 9, no. 4, pp. 1261–1269, 2012. 2012 2.743
S. Hameed, M. H. Agha, and M. A. Choudhary, “The role of data protection technolo­gies: A case study,” Life Science Journal, vol. 9, no. 4, pp. 1270–1279, 2012. 2012 2.743
A. Hanif and M. H. Agha, “Utilizing quality tools: A predictive maintenance perspec­tive,” International Journal of Performability Engineering, vol. 8, no. 6, pp. 699–704, 2012. 2012
S. Z. Ahmad, M. A. Qadir, M. S. Akbar, and A. Bouras, “Analysis of multi-server scheduling paradigm for service guarantees during network mobility,” Wireless Per­sonal Communications, vol. 63, no. 1, pp. 177–197, 2012. 2012 0.951
T. Hussain, M. A. Qadir, and S. Asghar, “Fuzzification of web objects: a semantic web mining approach,” International Journal of Computer Science, vol. 9, no. 2, pp. 61–67, 2012. 2012 2.28
M. Ahmad, S. Gruner, and M. T. Afzal, “Computational analysis of medieval manuscripts: A new tool for analysis and mapping of medieval documents to mod­ern orthography,” Journal of Universal Computer Science (JUCS), vol. 18, no. 20, pp. 2750–2770, 2012. 2012 0.762
A. Latif, M. T. Afzal, and H. A. Maurer, “Weaving scholarly legacy data into web of data,” Journal of Universal Computer Science (JUCS), vol. 18, no. 16, pp. 2301–2318, 2012. 2012 0.762
M. W. Hussain, M. T. Afzal, and M. Waqas, “Finding semantic relationship among associated medical terms,” International Journal of Emerging Sciences, vol. 2, no. 2, p. 300, 2012. 2012
S. A. Khan, M. T. Afzal, and M. A. Qadir, “Metadata based classification of scientific documents,” International Journal of Information Studies, vol. 4, no. 4, pp. 184–193, 2012. 2012
S. Kanwal, S. Nishat, M. I. Khan, S. I. Malik, and K. Akhtar, “Comparative homology modeling of human rhodopsin with several templates of bovine rhodopsin,” African Journal of Biotechnology, vol. 11, no. 2, pp. 466–473, 2012. 2012 0.573
Z. Khalid, S. Sameen, S. Malik, and S. Shehzad, “Computational analysis on the role of GPM6A in human thyroid cancer,” Journal of Data Mining in Genomics and Proteomics, vol. 3, no. 114, pp. 2153–0602, 2012. 2012 1.16
S. A. Shad, A. H. Sayyed, S. Fazal, M. A. Saleem, S. M. Zaka, and M. Ali, “Field evolved resistance to carbamates, organophosphates, pyrethroids, and new chemistry insecticides in Spodoptera litura Fab. (Lepidoptera: Noctuidae),” Journal of pest sci­ence, vol. 85, no. 1, pp. 153–162, 2012. 2012 3.78
S. F. Attiya K., “Maturity-onset diabetes of the young (MODY) Genes: Literature review,” Clinical Practice, vol. 1, no. 1, pp. 4–11, 2012. 2012 2.4
S. Azam, S. Fazal, and I. Muhammad, “Assessment of non-syndromic autosomal reces­sive intellectual disability (NS-ARID) genes,” International Journal of Modern Phar­maceutical Research, vol. 1, pp. 94–105, 2012. 2012
S. Bashir, M. Nasir, S. Qayyum, and A. Bashir, “Dimensionality of counterproductive work behaviors in public sector organizations of Pakistan,” Public Organization Review, vol. 12, no. 4, pp. 357–366, 2012. 2012
A. A. Rajput, S. H. Kalhoro, and R. Wasif, “Impact of product price and quality on consumer buying behavior: Evidence from Pakistan,” Interdisciplinary Journal of Contemporary Research in Business, vol. 4, no. 4, pp. 485–496, 2012. 2012
S. Rasool, A. A. Kiyani, M. J. Aslam, M. U. Akram, and A. A. Rajput, “Impact of organizational culture on employee’s career salience: An empirical study of banking sector in Islamabad, Pakistan,” International Journal of Business and Social Science, vol. 3, no. 7, pp. 299–306, 2012. 2012
H. Haroon, H. R. Yasir, S. Azeem, and F. Ahmed, “International portfolio diversifica­tion in developing equity markets of South Asia,” Studies in Business & Economics, vol. 7, no. 1, pp. 80–100, 2012. 2012
S. M. M. R. Naqvi, M. Ishtiaq, N. Kanwal, and S. Inderyas, “Impact of gender diversity on organizational performance in telecom sector of Pakistan: The moderating role of organizational culture,” Scottish Journal of Arts, Social Sciences and Scientific Studies, vol. 7, no. 1, pp. 32–49, 2012. 2012
2011
S. J. Nawaz, N. M. Khan, M. N. Patwary, and M. Moniri, “Effect of directional an­tenna on the Doppler spectrum in 3-D mobile radio propagation environment,” IEEE Transactions on Vehicular Technology, vol. 60, no. 7, pp. 2895–2903, 2011. 2011 4.066
Q. Ahmed, A. I. Bhatti, and M. Iqbal, “Virtual sensors for automotive engine sensors fault diagnosis in second-order sliding modes,” IEEE Sensors Journal, vol. 11, no. 9, pp. 1832–1840, 2011. 2011 2.512
S. Iqbal and A. I. Bhatti, “Load varying polytopic based robust controller design in LMI framework for a 2DOF stabilized platform,” Arabian Journal for Science and Engineering, vol. 36, no. 2, pp. 311–327, 2011. 2011 0.244
Q. Ahmed and A. I. Bhatti, “Estimating SI engine efficiencies and parameters in second-order sliding modes,” IEEE Transactions on Industrial Electronics, vol. 58, no. 10, pp. 4837–4846, 2011. 2011 7.168
M. A. Rizvi, A. I. Bhatti, and Q. R. Butt, “Hybrid model of the gasoline engine for misfire detection,” IEEE Transactions on Industrial Electronics, vol. 58, no. 8, pp. 3680–3692, 2011. 2011 7.168
M. Iqbal, A. I. Bhatti, S. I. Ayubi, and Q. Khan, “Robust parameter estimation of nonlinear systems using sliding-mode differentiator observe