Sr.No. Conference Publications  Year
1 A. Khan and M. Ali, “Consideration of simple approaches for structural health monitoring of structures in developing countries – An overview,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 106, IEEE, 2023. 2023
2 M. Shah and M. Ali, “Fresh Properties of Concrete having Banana Leaf Ash and Ba- nana Fibers,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 107, IEEE, 2023. 2023
3 S. Ahmed and M. Ali, “A Review on Properties of Concrete Having Crumb Rubber as Partial Replacement of Fine Aggregates,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 116, IEEE, 2023. 2023
4 A. Amjid and M. Ali, “Impact of Artificial and Natural Fibre Hybridization on Properties of Fresh Concrete,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 117, IEEE, 2023. 2023
5 S. Ahmed and M. Ali, “Mortarless Structures with Hollow Interlocking Blocks – A Comprehensive Review,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 123, IEEE, 2023. 2023
6 M. A. Javed and M. Ali, “Influence of Waste PET Bottle Particles and Steel Fibers on Fresh Properties of Concrete,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 125, IEEE, 2023. 2023
7 A. U. Rehman and M. Ali, “An overview on use of waste plastic for soil stabilization,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 307, IEEE, 2023. 2023
8 M. U. Shahid and M. Ali, “An overview of construction waste,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 501, IEEE, 2023. 2023
9 T. Ahmed and M. Ali, “A Review of Sustainability Indicators for Small-scale Construction Projects by Private Contractors,” in 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), p. 601, IEEE, 2023. 2023
10 S. I. Malik and S. Niazi, “Assessment of awareness concerning prophylaxis against COVID-19 in Pakistani population,” in International Conference of Chemistry, Materials & Technology (CMT-2023), 2023. 2023
11 A. Janjua, “Compliance with International Financial Reporting Standards Disclosure Requirements,” in Proceedings of 10th CIBRC, 2023), 2023. 2023
12 H. Muazzam, M. K. Ishak, A. Hanif, A. Bhatti, N. A. M. Isa, and M. N. Mahyuddin, “Vector Control of IPMSM used in Electric Vehicles,” in 2022 13th Asian Control Conference (ASCC), pp. 1317–1321, IEEE, 2022. 2022
13 H. M. Y. Naeem, Y. A. Butt, Q. Ahmed, and A. I. Bhatti, “Eco-driving Control of Electric Vehicle with Traffic Signals and Battery Dynamic Model,” in 2022 13th Asian Control Conference (ASCC), pp. 2320–2326, IEEE, 2022. 2022
14 M. U. Tahir, U. Rafique, M. M. Ahmed, M. Alibakhshikenari, F. Arpanaei, and B. S. Virdee, “Equilateral triangular slot-based planar rectangular antenna for millimeter- wave applications,” in 2022 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), pp. 103–106, IEEE, 2022. 2022
15 N. M. Khan, M. Mansoor, S. K. R. Moosavi, M. H. Zafar, U. A. Khan, and M. Shahzad, “A novel search and rescue optimization algorithm based artificial neural network for identification, classification and location of dc fault in two terminal hvdc transmission systems,” in 2022 International Conference on Emerging Trends in Smart Technologies (ICETST), pp. 1–6, 2022. 2022
16 A. J. Das and M. Ali, “Flexural Capacity of Recycled Plastic Corrugated Sheet,” in 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), p. 178, 2022. 2022
17 A. Iqbal and M. Ali, “An overview on need for automatic structural detailing of line elements in BIM tools,” in 1st International Conference on Advances in Civil & Envi- ron mental Engineering (ICACEE 2022), p. 172, 2022. 2022
18 H. Ilyas and M. Ali, “Low price instrumentations for structural health monitoring – A review,” in 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), p. 148, 2022. 2022
19 B. Hassan and M. Ali, “Economization of Stiffeners Considering Near- Fault Ground Motion Effects on Confined Brick Masonry Structures,” in 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), p. 132, 2022. 2022
20 M. Ali, S. Khalid, M. S. Saad, and M. Sudheer, “Sustainable Concrete: A review,” in 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), p. 171, 2022. 2022
21 B. Hassan and M. Ali, “Potential of used-petrol-engine-oil as an admixture in cement composites: A detailed review,” in 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022, Khuna, Bangladesh), p. 1141, 2022. 2022
22 Z. U. Abideen and M. Ali, “Effects of the combined use of banana fiber and used- diesel-engine oil on the workability of concrete,” in 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022, Khuna, Bangladesh), p. 1140, 2022. 2022
23 M. Abrar and M. Ali, “A review on the hybridization of varying length natural fibers for cement composites,” in 6th International Conference on Civil Engineering for Sustainable Development(ICCESD 2022, Khuna, Bangladesh), p. 1138, 2022. 2022
24 A. J. Das and M. Ali, “An overview on different reinforcing bars from manufacturing to strengthening element,” in 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022, Khuna, Bangladesh), p. 1137, 2022. 2022
25 S. Khalid, M. S. Saad, W. Ali, M. Sudheer, and M. Ali, “Behavior of concrete at high temperature: A review,” in 6th International Conference on Civil Engineering for Sustainable Development (ICCESD 2022, Khuna, Bangladesh), p. 1133, 2022. 2022
26 M. J. Hyder, A. Nauman, and S. Musheer, “Monthly Average Solar Radiation and Angstrom-Prescott Model for Islamabad, Pakistan,” Engineering Proceedings, vol. 23, no. 1, p. 26, 2022. 2022
27 M. Haroon, S. Rasheed, M. Irfan, M. Masud, and M. A. Munawar, “Computational Investigation of the Flow Structure through an Over-Expanded Nozzle,” Engineering Proceedings, vol. 23, no. 1, p. 7, 2022. 2022
28 U. Zia, S. Qureshi, H. Aslam, and M. Zulfiqar, “Driving Parameters for Technology Penetration in Pakistan: A Case Study for Indoor LED Lighting,” Engineering Proceedings, vol. 23, no. 1, p. 10, 2022. 2022
29 M. Masud, M. D. Ali, M. Irfan, S. Rasheed, and M. Haroon, “Numerical Investigation of Impact and Compression after Impact Performance of 45° Biaxial Composite Laminates,” Engineering Proceedings, vol. 23, no. 1, p. 18, 2022. 2022
30 N. Razzaq, N. Masood, S. Nawaz, N. Anjum, and N. Ramzan, “Stroke Prediction in Elderly Persons using Remote Health Monitoring,” in 29th IEEE International Conference on Electronics and Circuits Systems), p. 1133, 2022. 2022
31 A. Ashfaq, N. Anjum, S. Ahmed, and N. Masood, “19th International Conference on Frontiers of Information Technology,” in 2022 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC), 2022. 2022
32 A. S. Urooj, T. H. Zia, S. sohail, and E. Dilshad, “Synthesis and evaluation of silver nanoparticles of Glycyrrhiza glabra and Mentha Spicata,” in 10th International Conference on Biological and Computational Sciences, C-BICS 2022), 2022. 2022
33 M. Ullah, A. Hamza, I. A. Taj, and M. Tahir, “Low Resolution Face Recognition using Enhanced SRGANs Generated Images,” in 16th International Conference on Emerging Technologies, pp. 1-5, 2021. 2021
34 Z. Latif, A. Shahzad, R. Samar, and A. I. Bhatti, “Lateral Parameter-Varying Mod­elling and Control of a UAV on-Ground,” IFAC-PapersOnLine, vol. 54, no. 8, pp. ISO- 135, 2021. 2021
35 M. H. Zafar, U. A. Khan, and N. M. Khan, “Hybrid Grey Wolf Optimizer Sine Cosine Algorithm based Maximum Power Point Tracking Control of PV Systems under Uni­form Irradiance and Partial Shading Condition,” in 2021 4th International Conference on Energy Conservation and Efficiency (ICECE), pp. 1-6, IEEE, 2021. 2021
36 N. M. Khan, U. A. Khan, and M. H. Zafar, “Maximum Power Point Tracking of PV System under Uniform Irradiance and Partial Shading Conditions using Machine Learning Algorithm Trained by Sailfish Optimizer,” in 2021 4th International Confer­ence on Energy Conservation and Efficiency (ICECE), pp. 1-6, IEEE, 2021. 2021
37 M. H. Zafar, U. A. Khan, and N. M. Khan, “A sparrow search optimization algo­rithm based MPPT control of PV system to harvest energy under uniform and non­uniform irradiance,” in 2021 International Conference on Emerging Power Technolo­gies (ICEPT), pp. 1-6, IEEE, 2021. 2021
38 N. M. Khan, U. A. Khan, and M. H. Zafar, “Radial Basis Function trained with Dynamic Differential Annealed Optimization algorithm based Maximum Power Point Tracking Control of PV system under Uniform and Non-Uniform irradiance,” in 2021 International Conference on Emerging Power Technologies (ICEPT), pp. 1-6, IEEE, 2021. 2021
39 Q. Arooj and U. A. Khan, “Improving the Efficiency of Transmission Line by Using 48-Pulse Smart Power Flow Controller,” in 16th International Conference on Emerging Technologies (ICET), Islamabad, pp. 1-6, IEEE, 2021. 2021
40 M. H. Zafar, N. M. Khan, and U. A. Khan, “Short Term Hybrid PV/Wind Power Forecasting for Smart Grid Application using Feedforward Neural Network (FNN) Trained by a Novel Atomic Orbital Search (AOS) Optimization Algorithm,” in 2021 International Conference on Emerging Power Technologies (ICEPT), pp. 1-6, IEEE, 2021. 2021
41 N. M. Khan, U. A. Khan, and M. H. Zafar, “Optimal Control of PV System to Extract Maximum Power Under Non-Uniform Environmental Conditions,” in 2021 Interna­tional Conference on Emerging Power Technologies (ICEPT), pp. 1-6, IEEE, 2021. 2021
42 N. M. Khan, U. A. Khan, and M. H. Zafar, “Short Term Power Forecasting of Wind Energy System using Deep Neural Network (DNN) Trained by a Novel Meta-Heuristic Optimization Algorithm,” in 2021 International Conference on Emerging Power Tech­nologies (ICEPT), pp. 1-6, IEEE, 2021. 2021
43 S. S. S. Gardezi and N. Shafiq, “Prospects of a Sustainable EOL-Carbon Footprint As­sessment of a Tropical Housing Habitat,” in Proceedings of the International Conference on Civil, Offshore and Environmental Engineering, pp. 545-554, Springer, 2021. 2021
44 A. Zaman, F. Khalid, and M. Ali, “Provisions of Sustainability in Structural Design Approaches in Different Codes,” in 6th International Conference on Building Materials and Construction (ICBMC 2021), National University of Singapore, 2021. 2021
45 W. Ahmad, S. Gul, and M. Ali, “Review on Flaws In Concrete and its Structural Performance,” in International Congress on Phenomenological Aspects of Civil Engi­neering, Ataturk University, Turkey, 2021. 2021
46 A. Ejaz and M. Ali, “Limitations of Autodesk Robot Structural Analysis Professional for Structural Design Output: A Review of Frame Building,” in International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey, 2021. 2021
47 A. Rehman and M. Ali, “Effectiveness of Hybrid Fibers in Cementitious Composites Towards Sustainability: A Review,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA, 2021. 2021
48 A. J. Das and M. Ali, “Recycling of waste plastic with least effect to environment: A review,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA, 2021. 2021
49 B. Hassan and M. Ali, “A Review on Durability Methods for Natural Fibers in Polymer Matrices from Sustainability Aspects,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California, 2021. 2021
50 B. Hassan and M. Ali, “Workability of Concrete Having Used Petrol Engine Oil and Banana Fibers,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California, 2021. 2021
51 M. Abrar and M. Ali, “Effect of Banana fibers on the enhancement of compressive toughness of Reinforced Concrete Columns-A Review,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Fran­cisco, Californi, 2021. 2021
52 S. Ullah and M. Ali, “Treatment of Natural Fibers for Improving Cement Compos­ites Behavior-An Overview,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA, 2021. 2021
53 S. Ullah and M. Ali, “Sustainability Aspects in Seismic Performance of Confined Ma­sonry Structures: A Review,” in International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA, 2021. 2021
54 M. H. Dodhy, M. U. Farooqi, and M. Ali, “Utilization of Natural Fibers in Construction Industry: A Review,” in International Conference on Computational Civil Engineering Empower The Digital Transition In The Construction World, 2021. 2021
55 M. Abrar and M. U. Farooqi, “Impacts of Floods on Bridges -A Review,” in 1st International Conference on Applied Engineering and Natural Sciences, 2021. 2021
56 M. Abrar and M. U. Farooqi, “Remedial Measures to Reduce the Harmful Impacts of Tsunami on Buildings -A Review,” in 1st International Conference on Applied Engineering and Natural Sciences, 2021. 2021
57 R. Sabir and M. M. Khan, “Thermal hydraulic performance augmentation of dim­pled enhanced tubes for different dimple shapes using variation in radial dimples,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
58 R. Sabir and M. M. Khan, “Thermal hydraulic performance enhancement of U-tubes using inward ellipsoidal 45-degree dimples,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
59 L. Hussain and M. M. Khan, “A review on jet impingement cooling methods,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
60 Y. Zulfiqar and H. M. J. Joya, A J, “Stress Analysis of Flat and Conical Roof Cylin­drical Tank Due to Seismic Sloshing,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
61 H. Ahmed, Y. Zulfiqar, and H. M. J. Joya, A J, “Modelling and Analysis of Faults in a Nominal n Model of a Medium Transmission Line Using Simulink,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
62 Y. Zulfiqar and H. M. J. Joya, A J, “Deformation and Stress Analysis of Cylindrical Acid Storage Tank with Piping Attachments due to Sloshing Upon Kashmir 2005, Earthquake,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
63 M. Zulfiqar, U. R. Zia, T. Rashid, R. Siddiqui, S. Ullah, W. N. Awan, and M. M. Uddin, “Prospects of bioenergy potential in Punjab (Pakistan) under different scenar­ios of agricultural growth,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
64 M. Ahmed and M. Irfan, “Pevaporation Dynamics of two differently sized Interact­ing Droplets,” in International Conference on Advances in Mechanical Engineering, Pakistan, 2021. 2021
65 D. Hamid, H. Majeed, Z. A. Rahim, and M. S. Iqbal, “Competitive and Co-Operative Analysis of Genetic-Programming,” IOP Conference Series: Materials Science and Engineering, vol. 1051, no. 1, p. 012003, 2021. 2021
66 S. M. Muzammal, R. K. Murugesan, and N. Jhanjhi, “Introducing Mobility Metrics in Trust-based Security of Routing Protocol for Internet of Things,” in 2021 National Computing Colleges Conference (NCCC), pp. 1-5, IEEE, 2021. 2021
67 P. Mahadevappa, S. M. Muzammal, and R. K. Murugesan, “A Comparative Analysis of Machine Learning Algorithms for Intrusion Detection in Edge-Enabled IoT Networks,” arXiv preprint arXiv:2111.01383, 2021. 2021
68 A. Zaheer, M. Z. Asghar, and A. Qayyum, “Intrusion Detection and Mitigation Frame­work for SDN Controlled IoTs Network,” in 2021 IEEE 18th International Conference on Smart Communities: Improving Quality of Life Using ICT, IoT and AI (HONET), pp. 147-151, IEEE, 2021. 2021
69 M. Z. U. Khan, A. Ahmed, M. R. Siddiqui, and M. A. Ali, “Effect of Dimple Shape and Depth on Tribological Performance of Textured Surface,” in 18th IBCAST, 2021. 2021
70 U. U. Rehman, M. Zulfiqar, W. Nazir Awan, and A. Awais, “Comparative Assessment of Bioenergy Technologies for Energy Production through Agricultural Residues,” in International Conference on Energy, Water and Environment (ICEWE-21), 2021. 2021
71 M. Uzair Shah, R. A. Pasha, A. Hassan, U. U. Rehman, M. Zulfiqar, and W. Nazir Awan, “A Supply Chain System To Transition From Non Commercial Haz­ardous Energy Sources To SUustainable Bio Energy,” in International Conference on Energy, Water and Environment (ICEWE-21), 2021. 2021
72 H. Khalil, M. M. Ahmed, U. Rafique, R. Almesaeed, and W. Nazar, “Optimum placement of conformal antenna array based on path loss profile,” in Proceedings of Inter- national Conference on Advances in the Emerging Computing Technologies (AECT), pp. 1–5, IEEE, 2020. 2020
73 U. Rafique and H. Khalil, “Modified planar rectangular antenna array for wideband 5g mimo applications,” in Proceedings of International Conference on Advances in the Emerging Computing Technologies (AECT), pp. 1–5, IEEE, 2020. 2020
74 S. Agarwal, U. Rafique, and V. Jain, “Wideband e-shaped planar antenna for cellular, GPS, and wireless applications,” in International Conference on Intelligent Computing and Smart Communication 2019, pp. 633–641, Springer, 2020. 2020
75 U. F. Ahmed, Z. Hameed, F. Ahmed, T. A. U’Chong, M. M. A. Asif, et al., “Design and development of control system for unmanned ground vehicle and its manipulator,” in 2020 International Conference on Engineering and Emerging Technologies (ICEET), pp. 1–8, IEEE, 2020. 2020
76 A. Shehryar and M. Ali, “Improvement in impact resistance of GFRP reinforced concrete wall panels using jute fibres,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED- UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
77 M. Sudheer and M. Ali, “Behavior of interlocking plastic-block wall with opening under harmonic loading using locally developed shake tables,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
78 S. Afzal and M. Ali, “Out-of-plane behavior of mortar-free interlocking solid-walls under seismic loading – a review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED- UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
79 A. Abbas, A. Ejaz, and M. Ali, “Outilization of natural fibers in concrete for improving behavior of non-structural elements – a review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
80 H. U. Din and M. Ali, “Energy dissipation in 3d structure with multiple uplifts at column bases,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
81 Waris and M. Ali, “Finite element modelling of uplift in structures – a review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
82 M. B. T. Kiani and M. Ali, “Seismic analysis and design of elevated water tower – a review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
83 A. U. Rahman and M. Ali, “Influence of jute fibre and GFRP rebars in compressive and dynamic behavior of prototype thin shear concrete walls,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
84 M. Shah, M. U. Farooqi, and M. Ali, “Use of admixtures in improving bonded asphalt overlay on concrete pavements-a critical review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
85 S. Z. Ali, M. U. Farooqi, and M. Ali, “Assessment of asphalt overlay performance over concrete bridge deck,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
86 M. U. Rahman, M. U. Farooqi, and M. Ali, “Use of BIM tools in highway transportation system in developed countries – a review,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
87 M. A. Tariq, M. U. Farooqi, and M. Ali, “A review on different influential factors and techniques for evaluating bonding between asphalt overlay and concrete pavement,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
88 W. Raza, F. Khalid, and M. Ali, “A review on observed flaws in bricks and their possible sustainable remedies for local construction,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
89 A. Bashir, S. Gul, and M. Ali, “A critical review on limitations of non-linear analysis of multi-storey structures,” in 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED- UET / IEP Karachi, Pakistan, vol. 11, 2020 2020
90 S. Malik and T. Solaija, “Static and dynamic analysis of absolute nodal coordinate formulation planar elements,” in 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 167–173, IEEE, 2020. 2020
91 M. Rizwan, A. Nadeem, and M. A. Sindhu, “Theoretical evaluation of software coupling metrics,” in 2020 17th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 413–421, IEEE, 2020. 2020
92 I. Hassan and W. Aruba, “Comparative analysis of solid waste management practices in higher education institutions of developing countries,” in 3rd Asian Conference on Science, Technology & Medicine, ACSTM, Deira, Dubai UAE, 2019. 2019
93 M. Waqas and M. Ali, “An efficient approach to incorporate soil-structure interaction effects for practicing engineers,” in IACGE 2018: Geotechnical and Seismic Research and Practices for Sustainability, pp. 639{651, American Society of Civil Engineers Reston, VA, 2019. 2019
94 N. Ajaz, A. Rashid, and M. Ali, “Relationship between energy dissipation and column uplift in simple 3d structure during dynamic loading.,” Structure, vol. 75, pp. 0-017. 2019
95 M. Ali and M. Affan, “Compressive behavior of jute fiber reinforced concrete under freeze-thaw cycles,” in International Civil Engineering and Architecture Conference, 2019. 2019
96 M. Khan, M. Cao, and M. Ali, “Influence of caco3 whiskers, steel fibers and basalt fibers hybridization on exural toughness of concrete,” in 5th International Conference on Sustainable Construction Materials and Technology, Kingston University, London UK, 2019. 2019
97 F. Qamar, T. Thomson, and M. Ali, “Effect of natural fibrous plaster on lateral resistance of mortarless interlocking wall,” in 5th International Conference on Sustainable Construction Materials and Technology, Kingston University, London UK, 2019. 2019
98 M. Affan and M. Ali, “Behavior of jute fiber reinforced concrete under freeze-thaw cycles,” in International Civil Engineering and Architecture Conference, Trabzon, Turkey, 2019. 2019
99 M. Zahid and M. Ali, “Behavior of jute fiber reinforced stabilized earth-brick to improve load carrying capacity,” in International Civil Engineering and Architecture Conference, Trabzon, Turkey, 2019. 2019
100 M. M. B. Safdar and M. Ali, “Robot structural analysis for practising designers in developing countries – challenges and their solution,” in International Civil Engineering and Architecture Conference, Trabzon, Turkey, 2019. 2019
101 A. N and A. M, “Numerical modelling of uplift in simple 3d structure,” 2019. 2019
102 D. khan, E. AM, M. ST, and S. SS, “Embodied carbon footprint assessment of a conventional commercial building using bim,” 11th International Conference (CITC-11) September 9-11, 2019, London, UK, 2019. 2019
103 A. J. H. R. MHS, Syed and S. SS, “Assessment of embodied carbon footprint of an educational building in pakistan using building information modelling (bim),” 11th International Conference (CITC-11) September 9-11,2019, London, United Kingdom, 2019. 2019
104 S. Gul and S. Naseer, “Concrete containing recycled rubber steel fiber,” Procedia Structural Integrity, vol. 18, pp. 101{107, 2019. 2019
105 K. Mehdi, S. Gul, and M. Ali, “Influence of bio-based admixture on compressive strength of concrete for columns,” Procedia Structural Integrity, 2019. 2019
106 U. Khan, F. Khalid, and M. Ali, “Potential utilization of waste-materials in construction-determination of properties of composite having waste materials,” 2019. 2019
107 K. F. Raza, Ahmad and K. Ali, “Effect of various aggregate sources on concrete strength,” 2019. 2019
108 K. Arooj, M. Farooqi, and M. Ali, “Availability and potential of natural fibres of pakistan to be used in rigid pavements,” 2019. 2019
109 M. Farooqi and M. Ali, “Construction practices for first ever wheat straw reinforced concrete pavement for light traffic,” 5th International Conference on Sustainable Construction Materials and Technology, 2019. 2019
110 T. Ahmed, M. Farooqi, and M. Ali, “Compressive behaviour of rice straw reinforced concrete for rigid pavements,” 8th Global Conference on Materials Science and Engineering, 2019. 2019
111 M. Khana, S. S. Warsia, S. H. I. Jaffery, R. Ahmada, and M. Younasa, “Analysis of energy consumption in orthogonal machining of al 6061-t6 alloy,” in Advances in Manufacturing Technology XXXIII: Proceedings of the 17th International Conference on Manufacturing Research, incorporating the 34th National Conference on Manufacturing Research, 10-12 September 2019, Queen’s University, Belfast, vol. 9, p. 327, IOS Press, 2019. 2019
112 M. B. Bashir and A. Nadeem, “An experimental tool for search-based mutation testing,” in 2018 International Conference on Frontiers of Information Technology (FIT), pp. 30-34, IEEE, 2018. 2018
113 M. B. Bashir and A. Nadeem, “An evolutionary mutation testing system for java programs: emujava,” in Intelligent Computing-Proceedings of the Computing Conference, pp. 847-865, Springer, 2019. 2019
114 M. Muzamal and A. Nadeem, “Improving test adequacy assessment by novel javascript mutation operators,” in 2019 16th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 647{652, IEEE, 2019. 2019
115 M. Qasim Khan, N. Afzal, I. Riasat, S. Hafeez, S. Imtiaz, and S. Marriam Bakhtiar, “Emerging trends of single cell omics in neuroscience research,” in 1st International Conference on Recent Updates in Biotechnology ICRUB 2019. 2019
116 S. Khurshid, M. Qasim Khan, N. A. Qureshi, I. Riasat, S. Hafeez, and S. M. Bakhtiar, “Prevention and management of cardiovascular disorders by the virtue of nuterigenetics and exercise training,” in 1st International Conference on Recent Updates in Biotechnology ICRUB 2019. 2019
117 H. Khalil, M. M. Ahmed, S. Rahman, and U. Rafique, “Nose cone conformal antenna array design for X-band Radar applications,” in Proceedings of Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, pp. 1-3, 2018. 2018
118 U. Rafique, M. M. Ahmed, M. M. Hassan, and H. Khalil, “A modified super-wideband planar elliptical monopole antenna,” in Proceedings of Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, pp. 1-6, 2018. 2018
119 U. Rafique and S. Agarwal, “A modified Frequency Selective Surface band-stop filter for ultra-wideband applications,” in Proceedings of Second Symposium on Recent Advances in Communication Theory, Antennas and Propagation (CIAP 2018), Bangalore, India, pp. 891-894, 2018. 2018
120 H. Khalil, M. M. Ahmed, U. Rafique, S. Rahman, and M. Latif, “Design of X-band cylindrical conformal substrate integrated waveguide slot antenna array,” in Proceedings of 21st Saudi Computer Society National Computer Conference, pp. 1-4, 2018. 2018
121 S. A. Abbas, R. Samar, M. A. Rizvi, and A. I. Bhatti, “A method for multimodal optimization with application to signal processing,” in 2018 15th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 357{364, IEEE, 2018. 2018
122 U. Maqbool and U. A. Khan, \Wavelet based feature analysis of fault signals in a micro-grid,” in 2018 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), pp. 1{6, IEEE, 2018. 2018
123 W. Abbasi, I. Shah, and F. u. Rehman, “Steering algorithm for nonholonomic mechanical systems using sliding mode control,” in International Bhurban Conference on Applied Sciences and Technology, 2018. 2018
124 M. Ashraf, A. Rehman, et al., “Performance analysis of current injection techniques for shunt active power filter,” in IOP Conference Series: Earth and Environmental Science, vol. 168, p. 012014, IOP Publishing, 2018. 2018
125 U. Maqbool and U. A. Khan, “Dynamic and transient analysis of a wavelet based protec¬tion scheme,” in 5th International Conference on Electrical Engineering (ICEE), Lahore, Pakistan, pp. 1–5, 2018. 2018
126 U. Maqbool and U. A. Khan, “Wavelet based feature analysis of fault signals in a micro-grid,” in Power Generation Systems and Renewable Energy Technologies 2018, 2018. 2018
127 R. Ara and U. A. Khan, “An alternate grid-splitting scheme and efficient algorithm for voltage source converter based multiterminal dc grid protection and restoration control,” in Power Generation Systems and Renewable Energy Technologies 2018, 2018. 2018
128 M. B. Ali, K. Ateeq, H. M. Ali, and S. S. S. Gardezi, “Construction delays assessment-a case study of interchange project in Pakistan,” in 13th International Congress on Advances in Civil Engineering, 12-14 September 2018, Izmir/TURKEY, 2018. 2018
129 S. Sojla, Z. Bashir, and E. Dilshad, “Green synthesis and characterization of silver nanopar¬ticles using alovera plant gel and their biological evaluation,” in 1st National Conference on Medicinal Plant Research, 29-31 Aug 2018 at Department of Chemistry, Karakoram International University Gilgit), 2018. 2018
130 P. Arshad and F. Anwar, “HR leading through lean management and customer centricity at telenor shared services,” in The European Proceedings of Social and Behavioral Sciences, vol. XL, pp. 969–990, 2018. 2018
131 S. Fatima, M. M. Hassan, and A. S. Khattak, “Knowledge diversity in the creation of project team social capital for project innovation outcome: Moderated mediating role of the type of structure,” in 3rd international conference on business management perspectives in the asian context Lahore Business School, 2018. 2018
132 A. Hashmi, A. Ahmed. S, and A. I. Bhatti, “Using IBMR for provincial water distribution,” in International Sustainable Development Conference, 2018. 2018
133 S. Ahmed and A. Mehmood, “Prioritizing human development under CPEC,” in Interna¬tional Conference on Sustainable Development through innovationin Economics and Management Sciences (ICSDIEMS), 2018 2018
134 H. Khalil, S. U. Rahman, U. Rafque, and M. M. Ahmed, “Design of slot antenna array for tracking radar using particle swarm optimization,” in Progress In Electromagnetics Research Symposium-Fall (PIERS), Singapore, pp. 2985–2987, IEEE, 2017. 2017
135 U. Rafque, H. Khalil, and S. Rehman, “Dual-band microstrip patch antenna array for future 5G communications,” in Progress In Electromagnetics Research Symposium-Fall (PIERS), Singapore, pp. 55–59, IEEE, 2017. 2017
136 S. Rehman, U. Rafque, U. F. Ahmed, M. N. Khan, and M. M. Ahmed, “Efects of sub­strate on the AC performance of submicron GaN HEMTs,” in 2017 13th International Conference on Emerging Technologies (ICET), pp. 1–7, IEEE, 2017. 2017
137 H. Khalil, S. U. Rahman, M. M. Ahmed, Q. Cao, and I. Hussain, “Design of waveguide slot array to generate sum and diference pattern for synthetic aperture radar,” in Progress In Electromagnetics Research Symposium-Spring (PIERS), pp. 3632–3636, IEEE, 2017. 2017
138 A. Hashmi, M. F. Hanif, and A. I. Bhatti, “Simulation and analysis of dufng os­cillator using sliding mode control,” in International Conference on Communication, Computing and Digital Systems (C-CODE), pp. 326–330, IEEE, 2017. 2017
139 A. Yar, A. I. Bhatti, and Q. Ahmed, “High fdelity engine model for a unifed con­trol, diagnostic and condition monitoring framework,” in American Control Conference (ACC), pp. 1629–1635, IEEE, 2017. 2017
140 A. I. Bhatti, M. Haseeb, S. Azam, S. Fazal, and M. Ullah, “State feedback based intervention design in WNT and cell cycle network,” in American Control Conference (ACC), pp. 4242–4247, IEEE, 2017. 2017
141 N. Qayyum, A. I. Bhatti, and M. Liaquat, “Landing control of unmanned aerial vehicle using continuous model predictive control,” in 2017 29th Chinese Control And Decision Conference (CCDC), pp. 1804–1808, IEEE, 2017. 2017
142 A. Hanif, Q. Ahmed, A. I. Bhatti, and G. Rizzoni, “Genetic algorithms optimized multi-objective controller for an induction machine based electrifed powertrain,” in 2017 IEEE Conference on Control Technology and Applications (CCTA), pp. 853–858, IEEE, 2017. 2017
143 G. Murtaza, Q. Ahmed, A. I. Bhatti, and G. Rizzoni, “An alternate control framework development for atkinson cycle engine using variable late intake valve,” in 2017 IEEE Conference on Control Technology and Applications (CCTA), pp. 866–871, IEEE, 2017. 2017
144 M. U. Farooqi and M. Ali, “Short-term durability of wheat straw reinforced concrete for pavement applications,” in 5th International Conference on Infrastructure Engineering in Developing Countries (IEDC-2017), NED, Karachi, 2017. 2017
145 M. D. Hashmat, A. S. Sultan, S. Rahman, S. M. Hussain, S. A. Ali, et al., “Flowing gels for loss circulation prevention,” in SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition, Society of Petroleum Engineers, 2017. 2017
146 A. Khalid, P. Kirisci, Z. Ghrairi, K. D. Thoben, and J. Pannek, “Towards implementing safety and security concepts for human-robot collaboration in the context of industry 4.0,” in Proceedings of the 39th International MATADOR Conference on Advanced Manufacturing, Manchester, UK, 2017. 2017
147 A. Khalid, P. Kirisci, Z. Ghrairi, J. Pannek, and K.-D. Thoben, “Safety requirements in collaborative human-robot cyber-physical system,” in Dynamics in Logistics, pp. 41– 51, Springer, 2017. 2017
148 U. B. Nisar, M. Aleem, M. A. Iqbal, and N.-S. Vo, “Jumbler: A lock-contention aware thread scheduler for multi-core parallel machines,” in International Conference on Re­cent Advances in Signal Processing, Telecommunications & Computing (SigTelCom), pp. 77–81, IEEE, 2017. 2017
149 M. Mateen, M. A. Iqbal, M. Aleem, and M. A. Islam, “A hybrid approach for spam detection for Twitter,” in 2017 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 466–471, IEEE, 2017. 2017
150 I. Asra, M. A. Islam, M. A. Iqbal, and M. Aleem, “Graph centrality based spam detec­tion,” in IEEE International Bhurban Conference on Applied Sciences and Technology (IBCAST), Bhurban, Islamabad., 2017. 2017
151 M. Badri, M. Aleem, M. A. Islam, M. A. Iqbal, and M. Waqar, “A fast implemen­tation of minimum spanning tree method and applying it to kruskal’s and prim’s algorithms,” in International Conference on Computing and Mathematical Sciences (ICCMS), pp. 10–15, 2017. 2017
152 R. Khan, M. A. Islam, et al., “Quantifcation of PIR protocols privacy,” in International Conference on Communication, Computing and Digital Systems (C-CODE), pp. 90–95, IEEE, 2017. 2017
153 A. Muhammad and M. A. Islam, “Performance evaluation of matrix multiplication in virtual machine,” in International Conference on Communication, Computing and Digital Systems (C-CODE), pp. 205–210, IEEE, 2017. 2017
154 Q. Mahmood, M. A. Qadir, and M. T. Afzal, “OntoDocRel-CBS: Ontology for mod­elling content based document similarity measures,” in 15th International Conference on Frontiers of Information Technology (FIT), 2017. 2017
155 L. Zafar, M. T. Afzal, and U. Ahmed, “Exploiting polarity features for developing sen­timent analysis tool,” in Proceedings of the 3rd International Workshop on Emotions, Modality, Sentiment Analysis and the Semantic Web, co-located with 14th ESWC 2017, Portroz, Slovenia, 2017. 2017
156 M. I. Khan, “Impact of individual personality on entrepreneurial intention: Mediating role of entrepreneurial passion and moderating role of individual network,” in The 27th International Conference on the Pacifc Rim Management, Los Angeles, 2017. 2017
157 M. I. Khan and I. Butt, “Impact of social identity on entrepreneurial intention: Me­diating role of entrepreneurial passion, moderating role of market orientation,” in The 27th International Conference on the Pacifc Rim Management, Los Angeles, 2017. 2017
158 M. I. Khan and I. Haider, “Sustainable engagement: A strategic framework for re­sponsible SMEs in South Asia region,” in Sustainability, Ethics, and Entrepreneurship (SEE) Academic Research Conference, Carolina, USA, 2017. 2017
159 S. Ahmed, “Welfare and economic impact of food and fnancial crisis on Pakistan,” in Marginalization and Social Exclusion in the Perspective of Market Economy, 2017. 2017
160 M. Rashad, D. M. Minhas, M. Ashraf, and S. Hussain, “PFC topologies for AC to DC converters in DC micro-grid,” in 2016 18th Mediterranean Electrotechnical Conference (MELECON), pp. 1–6, IEEE, 2016. 2016
161 D. M. Minhas, M. Rashad, S. Hussain, and M. Ashraf, “Cost efective bidirectional power transactions for queueing energy requests in smart micro-grids,” in 2016 18th Mediterranean Electrotechnical Conference (MELECON), pp. 1–6, IEEE, 2016. 2016
162 N. Fatima, M. M. Ahmed, K. S. Karimov, and K. Ahmedov, “Humidity efect on organic semiconductor NiPc flms deposited at diferent gravity conditions,” in IOP Conference Series: Materials Science and Engineering, vol. 146, p. 012035, IOP Pub­lishing, 2016. 2016
163 N. Fatima, M. M. Ahmed, and K. S. Karimov, “Efect of heating on the impedance of NiPc based organic feld efect transistor,” in Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management, pp. 2667–2674, 2016. 2016
164 A. M. Khan, M. M. Ahmed, M. Rafq, and U. Rafque, “Breakdown in a high power microwave antenna,” in 2016 International Conference on Emerging Technolo­gies (ICET), pp. 1–5, IEEE, 2016. 2016
165 A. M. Khan, M. M. Ahmed, M. Rafq, and U. Rafque, “Design of an efcient high power microwave antenna,” in 2016 19th International Multi-Topic Conference (IN­MIC), pp. 1–6, IEEE, 2016. 2016
166 S. S. Saleem, M. M. Ahmed, U. Rafque, and U. F. Ahmed, “Optimization of linear antenna array for low SLL and high directivity,” in 2016 19th International Multi-Topic Conference (INMIC), pp. 1–6, IEEE, 2016. 2016
167 A. Hanif, A. I. Bhatti, and Q. Ahmed, “Estimation of thermally de-rated torque of an HEV drive using robust LPV observer,” in American Control Conference (ACC), pp. 1530–1535, IEEE, 2016. 2016
168 A. Hanif, S. M. N. Ali, Q. Ahmed, A. Bhatti, G. Yin, and M. H. Jafery, “Effect of variation in rotor resistance on the dynamic performance of induction motor,” in 2016 35th Chinese Control Conference (CCC), pp. 9524–9529, IEEE, 2016. 2016
169 A. R. Yasin, M. Ashraf, A. I. Bhatti, S. Ahmad, and M. Rashid, “Sliding mode control for efcient utilization of renewable energy sources in DC micro grid: A comparison with a linear PID controller,” in 2016 International Conference and Exposition on Electrical and Power Engineering (EPE), pp. 621–625, IEEE, 2016. 2016
170 I. Khan, A. I. Bhatti, R. Anjum, and Q. Khan, “Constructive mechanism of lead/lag design for a class of linear systems,” in 2016 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2016. 2016
171 Y. A. Butt and A. I. Bhatti, “Exponential stabilization of kinematic nonholonomic systems using adaptive backstepping,” in 2016 International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2016. 2016
172 G. Murtaza, Y. A. Butt, and A. I. Bhatti, “Higher order sliding mode based control scheme for air path of diesel engine,” in 2016 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2016. 2016
173 S. A. Shaukat, K. Munawar, M. Arif, A. I. Bhatti, U. I. Bhatti, and U. M. Al-Saggaf, “Robust vehicle localization with GPS dropouts,” in 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS), pp. 1–6, IEEE, 2016. 2016
174 M. U. Farooqi and M. Ali, “Compressive behavior of wheat straw reinforced concrete for pavement applications,” in 4th International Conference on Sustainable Construction Materials and Technologies, 2016. 2016
175 M. U. Farooqi and M. Ali, “Compressive behavior of wheat straw reinforced concrete for pavement applications,” in 4th International Conference on Sustainable Construction Materials and Technologies, Las Vegas, USA, 2016. 2016
176 M. A. U. R. Tariq, “Pakistan’s food management and safety standards in context of water resources pricing. Soil and water resources: utilization, allocation and pricing,” in Department of Irrigation and Drainage, FAE&T and Water Management Research Centre, Faisalabad, Pakistan, 2016. 2016
177 M. U. Farooqi and M. Ali, “Flexural behavior of wheat straw reinforced concrete for pavement applications,” in 36th Cement and Concrete Science Conference, Cardif, UK, 2016. 2016
178 M. D. Hashmat, A. S. Sultan, S. Rahman, S. M. Hussain, et al., “Crosslinked polymeric gels as loss circulation materials: an experimental study,” in SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition, Society of Petroleum Engineers, 2016. 2016
179 K. Shaukat, N. Masood, S. Mehreen, F. Haider, A. Bakar, and U. Shaukat, “Population of data in web-tables schema,” in 2016 19th International Multi-Topic Conference (INMIC), pp. 1–6, IEEE, 2016. 2016
180 R. Ahmad, M. T. Afzal, and M. A. Qadir, “Information extraction from PDF sources based on rule-based system using integrated formats,” in Semantic Web Evaluation Challenge, pp. 293–308, Springer, 2016. 2016
181 M. Ullah, R. Khan, and M. A. Islam, “Poshida, a protocol for private information retrieval,” in 2016 Sixth International Conference on Innovative Computing Technology (INTECH), pp. 464–470, IEEE, 2016. 2016
182 R. Khan, M. Ullah, and M. A. Islam, “Revealing PIR protocols protected users,” in 2016 Sixth International Conference on Innovative Computing Technology (INTECH), pp. 535–541, IEEE, 2016. 2016
183 R. Asif and M. A. Islam, “Finding most collaborating mathematicians a co-author network analysis of mathematics domain,” in 2016 International Conference on Com­puting, Electronic and Electrical Engineering (ICE Cube), pp. 289–293, IEEE, 2016. 2016
184 H. Jafar and M. A. Islam, “Evaluation of graph centrality measure for tweet topic classifcation,” in International conference on Computing, Electronic and Electrical Engineering (ICE Cube), 2016. 2016
185 Z. Hassan, M. A. Qadir, M. A. Islam, U. Shahzad, and N. Akhter, “Modifed MinG algorithm to fnd top-K shortest paths from large RDF graphs,” in Semantic Web Evaluation Challenge, pp. 213–227, Springer, Cham, 2016. 2016
186 Z. Ul-Abdin, M. Shafque, and M. A. Qadir, “Telemedicine aware video coding un­der very-low bitrates,” in International Conference. Health Informatics and Medical Systems, 2016. 2016
187 A. Haider, A. Nadeem, and S. Akram, “Regression test suite optimization using adap­tive neuro fuzzy inference system,” in 14th International Conference on Frontiers of Information Technology (FIT 2016) Islamabad, Pakistan, 2016. 2016
188 A. Haider, A. Nadeem, and S. Akram, “Safe regression test suite optimization: A review,” in International Conference on Open Source Systems & Technologies (ICOSST 2016), Lahore, Pakistan, 2016. 2016
189 A. Qayyum, M. Shoaib, I. Faye, and A. R. Kashif, “Refnements of some new ef­cient quadrature rules,” in AIP Conference Proceedings, vol. 1787, p. 080003, AIP Publishing, 2016. 2016
190 M. I Khan et al., “Impact of social media marketing on customer purchase inten­tion: Mediating role of customer trust (marketing and communication in connected environment),” in 14th International Conference of the Society for Global Business & Economic Development (SGBED), New Jersey, USA, 2016. 2016
191 M. Asif, I. A. Taj, S. Ziauddin, M. B. Ahmad, and M. Tahir, “An efcient scheme for intra prediction block size and mode selection in advanced video coding,” in 2015 13th International Conference on Frontiers of Information Technology (FIT), pp. 211–215, IEEE, 2015. 2015
192 M. Z. Baig, Y. Mehmood, E. Javed, and I. Taj, “A novel: Exploiting GPU parallel processing for AFIS performance improvement,” in 2nd International Conference on Engineering & Emerging Technologies (ICEET), 2015. 2015
193 M. Riaz, M. Ashraf, K. S. Hong, G. H. Kim, and M. Rehan, “Adaptive synchronization of two diferent chaotic systems containing mutually Lipschitz nonlinearities subject to state time-delays,” in 2015 15th International Conference on Control, Automation and Systems (ICCAS), pp. 60–65, IEEE, 2015. 2015
194 Y. A. Butt, A. I. Bhatti, and Y. L. Sachkov, “Integrability by quadratures in optimal control of a unicycle on hyperbolic plane,” in American Control Conference (ACC), pp. 4251–4256, IEEE, 2015. 2015
195 Q. Khan, A. I. Bhatti, and R. Akmeliawati, “Robust stabilization of underactuated sys­tems via fast terminal sliding mode,” in 2015 10th Asian Control Conference (ASCC), pp. 1–6, IEEE, 2015. 2015
196 M. Z. Babar, R. Samar, A. I. Bhatti, and M. Baglietto, “Robust integrated lateral guidance and control of UAVs,” in 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR), pp. 523–528, IEEE, 2015. 2015
197 S. Rahman, M. E. Kandil, N. Al-Saif, A. S. Sultan, et al., “Measurements of volumetric phase behavior of mixtures of n-decane and CO2 at high pressures and high temper­atures,” in SPE Saudi Arabia Section Annual Technical Symposium and Exhibition, Society of Petroleum Engineers, 2015. 2015
198 M. Rafque, M. T. Nawaz, R. D. Evans, and M. Agha, “Analysing success factors in the development of absorptive capacity in pharmaceutical organisations based in Pakistan,” in 9th International Conference on Business Administration (ICBA’15), Dubai, UAE, World Scientifc and Engineering Academy and Society, 2015. 2015
199 M. Imran, M. T. Afzal, and M. A. Qadir, “Similarity-based malware classifcation using hidden markov model,” in 2015 Fourth International Conference on Cyber Security, Cyber Warfare, and Digital Forensic (CyberSec), pp. 129–134, IEEE, 2015. 2015
200 M. Imran, M. T. Afzal, and M. A. Qadir, “Using hidden markov model for dynamic malware analysis: First impressions,” in 2015 12th International Conference on Fuzzy Systems and Knowledge Discovery (FSKD), pp. 816–821, IEEE, 2015. 2015
201 N. Sharif and M. T. Afzal, “Recommendation approaches for e-learners: A survey,” in Proceedings of the 7th International Conference on Management of computational and collective intElligence in Digital EcoSystems, pp. 137–141, ACM, 2015. 2015
202 R. Ahmad and M. T. Afzal, “Research paper recommendation by exploiting co-citation occurrences in generic sections of scientifc papers,” in PhD Symposium at 13th Inter­national Conference on Frontiers of Information Technology, 2015. 2015
203 M. Tahir, Z. Ul-Abdin, and M. A. Qadir, “Enhancing the HEVC video analyzer for medical diagnostic videos,” in 2015 12th International Conference on High-Capacity Optical Networks and Enabling/Emerging Technologies (HONET), pp. 1–5, IEEE, 2015. 2015
204 Z. Ul-Abdin, M. Shafque, and M. A. Qadir, “Evaluating video codecs for telemedicine under very-low bitrates,” in 2015 8th International Congress on Image and Signal Processing (CISP), pp. 98–103, IEEE, 2015. 2015
205 I. Ihsan and M. A. Qadir, “Querying semantically related items using modifed 4-index scheme for XML documents,” in 2015 13th International Conference on Frontiers of Information Technology (FIT), pp. 47–52, IEEE, 2015. 2015
206 U. Farooq, T. P. Dhamala, A. Nongaillard, Y. Ouzrout, and M. A. Qadir, “A word sense disambiguation method for feature level sentiment analysis,” in 2015 9th Interna­tional Conference on Software, Knowledge, Information Management and Applications (SKIMA), pp. 1–8, IEEE, 2015. 2015
207 I. Ihsan, M. A. Qadir, F. F. Kiyani, and M. ur Rehman, “Semantic indexing for XML documents using RDBMS,” in 2015 International Conference on Information and Communication Technologies (ICICT), pp. 1–5, IEEE, 2015. 2015
208 A. Hussain, A. Nadeem, and M. T. Ikram, “Review on formalizing use cases and scenarios: Scenario based testing,” in 2015 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2015. 2015
209 M. Touseef, N. A. Butt, A. Hussain, and A. Nadeem, “Testing from UML design using activity diagram: A comparison of techniques,” in 11th International Conference on Emerging Technologies (ICET 2015), Peshawar, 2015. 2015
210 M. Rizwan, A. Nadeem, and M. B. Khan, “An evaluation of software fault tolerance techniques for optimality,” in 2015 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2015. 2015
211 Q. u. Zaman, M. A. Sindhu, and A. Nadeem, “Formalizing a use case to a kripke struc­ture,” in International Software Engineering and Applications (SEA 2015), Marina del Rey, USA, 2015. 2015
212 J. Khurshid and M. I. Khan, “Development of integral model for women entrepreneur­ship in South Asia,” in 60th Annual ICSB World Conference Dubai, UAE, 2015. 2015
213 Z. Riaz and M. I. Khan, “Impact of service failure severity and agreeableness on con­sumer switchover intentions: Mediating role of consumer forgiveness,” in 4th Interna­tional Conference on emerging trends in Management, Islamabad, 2015. 2015
214 J. Khurshid and M. I. Khan, “Investigation of factors afecting women entrepreneurship in Pakistan,” in 2nd International Conference: Challenges in Business & Management, Islamabad, 2015. 2015
215 M. Mubashir and M. I. Khan, “The impact of corporate social responsibility on con­sumer loyalty with mediation of customer satisfaction in banking industry of Pakistan,” in 2nd International Conference: Challenges in Business & Management, Islamabad, 2015. 2015
216 M. S. Akbar, K. A. Khaliq, R. N. B. Rais, and A. Qayyum, “Information-centric networks: categorizations, challenges, and classifcations,” in 2014 23rd Wireless and Optical Communication Conference (WOCC), pp. 1–5, IEEE, 2014. 2014
217 M. Asif, S. Majeed, I. A. Taj, M. B. Ahmed, and S. M. Ziauddin, “Exploiting MB level parallelism in H. 264/AVC encoder for multi-core platform,” in 2014 IEEE/ACS 11th International Conference on Computer Systems and Applications (AICCSA), pp. 125– 130, IEEE, 2014. 2014
218 U. Ali, M. Z. Shah, A. I. Bhatti, and R. Samar, “Robust nonlinear control design for scaled Yak-54 Unmanned Aerial Vehicle,” in The 26th Chinese Control and Decision Conference (CCDC), pp. 713–718, IEEE, 2014. 2014
219 A. Hanif, A. I. Bhatti, A. R. Yassin, G. Murtaza, and Q. Ahmed, “Sliding mode-based observer design for feld-oriented control of induction machine drive for applications in hybrid electric vehicles,” in 2014 33rd Chinese Control Conference (CCC), pp. 263–268, IEEE, 2014. 2014
220 M. Muzammel, G. Shabbir, and U. Rafque, “Energy efcient approach for clustering algorithm in wireless sensor networks,” in Proceedings of 17th International Multi Topic Conference (INMIC 2014), pp. 46–51, IEEE, 2014. 2014
221 U. Rafque, S. A. Ali, and G. Shabbir, “Ultra-wideband patch antenna for microwave communications,” in Proceedings of 17th International Multi Topic Conference (INMIC 2014), pp. 10–13, IEEE, 2014. 2014
222 A. Khalid and Z. H. Khan, “Multi-objective optimization for error compensation in intelligent micro-factory CPS,” in Computational Intelligence for Decision Support in Cyber-Physical Systems, pp. 67–103, Springer, 2014. 2014
223 A. Hussain, Z. H. Khan, A. Khalid, and M. Iqbal, “A comparison of pulse compres­sion techniques for ranging applications,” in Computational Intelligence for Decision Support in Cyber-Physical Systems, pp. 169–191, Springer, 2014. 2014
224 A. Wahab, A. Khalid, and R. Nawaz, “Non-contact metrology inspection system for precision micro products,” in 2014 International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE), pp. 151–156, IEEE, 2014. 2014
225 A. Khalid and A. Nawaz, “Sensor less control of DC motor using Kalman flter for low cost CNC machine,” in 2014 International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE), pp. 180–185, IEEE, 2014. 2014
226 Q. Mahmood, M. A. Qadir, and M. T. Afzal, “Finding relatedness between research papers using similarity and dissimilarity scores,” in International Conference on Web-Age Information Management, pp. 707–710, Springer, 2014. 2014
227 S. Tahir and M. T. Afzal, “A novel phylogenetic tree data visualization application for researchers,” in Science and Information Conference (SAI), pp. 93–99, IEEE, 2014. 2014
228 N. Masood and N. Andleeb, “A taxonomy of changes in schema evolution,” in 2014 International Conference on Computational Science and Technology (ICCST), pp. 1–6, IEEE, 2014. 2014
229 M. Aleem, R. Prodan, and C. Bologa, “Using JAVA for programming heterogeneous manycore parallel computers,” in 3rd International Conference Theory and Practice in Modern Computing. IADIS Lisbon, Portugal, 2014. 2014
230 P. A. Shah, H. B. Hasbullah, S. Rafque, S. U. Rehman, and L. T. Jung, “Fuzzy logic based link status classifcation for efcient multipath routing in multi-hop wireless mesh networks,” in 2014 International Conference on Computer and Information Sciences (ICCOINS), pp. 1–6, IEEE, 2014. 2014
231 M. B. Bashir and A. Nadeem, “A state-based ftness function for the integration testing of object-oriented programs,” in 2014 International Conference on Emerging Technolo­gies (ICET), pp. 24–29, IEEE, 2014. 2014
232 F. S. Khan and M. I. Khan, “Impact of corporate social responsibility on consumer purchase intension with mediating role of customer company identifcation,” in 4th International Conference on Business Management, Development, Competitive and Innovation, IBA Sukkur, 2014. 2014
233 M. Irshad and M. I. Khan, “Evaluating consumer based brand equity and its impact on purchase intentions: A moderating role of word of mouth,” in 4th International Conference on Business Management, Development, Competitive and Innovation, IBA Sukkur, 2014. 2014
234 A. Zaheer, S. Naz, A. Rasheed, K. A. Khaliq, T. Javed, and A. Qayyum, “Smart trimming of video from edge, for fne-grained adaptive multicast,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
235 M. Ashraf and M. Aslam, “Impedance matching for underwater piezoelectric transduc­ers using piezoelectric transformer,” in 2013 10th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 308–311, IEEE, 2013. 2013
236 F. A. Mughal, M. M. Ahmed, K. Hayat, U. Rafque, and Q. D. Memon, “A wideband power divider for microwave applications,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2013. 2013
237 W. Afzal, M. M. Ahmed, and F. A. Mughal, “L-shaped multiband microstrip patch antenna for DCS and WLAN applications,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2013. 2013
238 M. M. Ahmed, N. M. Memon, and S. A. Moiz, “Efects of interfacial layer on submi­cron GaAs MESFETs characteristics,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
239 Q. D. Memon, M. M. Ahmed, N. M. Memon, and U. Rafque, “An efcient mechanism to simulate DC characteristics of GaAs MESFETs using swarm optimization,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2013. 2013
240 M. A. Bashir, M. M. Ahmed, U. Rafque, and Q. D. Memon, “Design of a Ku-band high gain low noise amplifer,” in 2013 IEEE International RF and Microwave Conference (RFM), pp. 168–171, IEEE, 2013. 2013
241 F. A. Mughal, M. M. Ahmed, and U. Rafque, “An efcient power divider for dual-band microwave applications,” in 2013 11th International Conference on Frontiers of Information Technology (FIT), pp. 42–44, IEEE, 2013. 2013
242 S. A. Moiz, A. M. Nahhas, H. Nasir, K. S. Karimov, and M. M. Ahmed, “Electrical properties of Ag-silicon Schottky diode with orange-dye as interface layer deposited at various gravity accelerations,” in 2013 Saudi International Electronics, Communica­tions and Photonics Conference (SIECPC), pp. 1–5, IEEE, 2013. 2013
243 M. Asad, S. Iqbal, and A. I. Bhatti, “MIMO sliding mode controller design using in­verse hyperbolic function,” in 2013 10th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 54–62, IEEE, 2013. 2013
244 M. R. Azam, A. I. Bhatti, A. Arshad, and M. Z. Babar, “Sensitivity analysis of WNT signaling pathway,” in 2013 10th International Bhurban Conference on Applied Sci­ences and Technology (IBCAST), pp. 122–127, IEEE, 2013. 2013
245 A. Tahir, S. Iqbal, A. I. Bhatti, and M. Pervaiz, “Steadiness of real time inverted pendulum,” in 2013 10th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 68–72, IEEE, 2013. 2013
246 S. U. Ali, M. Z. Shah, R. Samar, and A. I. Bhatti, “Lateral control of UAVs: Trajec­tory tracking via higher-order sliding modes,” in 2013 9th Asian Control Conference (ASCC), pp. 1–6, IEEE, 2013. 2013
247 F. Tahir, Q. Ahmed, and A. I. Bhatti, “Real-time switched model predictive control of a twin rotor system,” in 2013 IEEE 52nd Annual Conference on Decision and Control (CDC), pp. 4847–4852, IEEE, 2013. 2013
248 M. Z. Babar, S. U. Ali, M. Z. Shah, R. Samar, A. I. Bhatti, and W. Afzal, “Robust con­trol of UAVs using H8 control paradigm,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2013. 2013
249 M. Asad, A. I. Bhatti, and S. Iqbal, “Digital phase locked loop design using discrete time sliding mode loop flter,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
250 M. B. Bashir, T. Malik, and M. T. Afzal, “SSTCSC: A semantic structure of test cases and source code,” in 2013 11th International Conference on Frontiers of Information Technology (FIT), pp. 241–246, IEEE, 2013. 2013
251 Q. Mahmood, M. A. Qadir, and M. T. Afzal, “Document similarity detection using se­mantic social network analysis on RDF citation graph,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
252 R. Mehmood, M. T. Afzal, and H. Maurer, “Knowledge discovery in hash tags,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), IEEE, 2013. 2013
253 A. Sohail, M. T. Afzal, and J. Ahmad, “Discovery of medical experts,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
254 Z. Babar, M. Waqas, Z. Halim, and M. A. Islam, “Genetic programming based degree constrained spanning tree extraction,” in 2013 Eighth International Conference on Digital Information Management (ICDIM), pp. 241–246, IEEE, 2013. 2013
255 U. Farooq, Y. Ouzrout, A. Nongaillard, and M. A. Qadir, “Product reputation evalu­ation: The impact of conjunction on sentiment analysis,” in 7th Int. Conf. Software, Knowledge, Information Management and Applications (SKIMA 2013), pp. 590–602, 2013. 2013
256 S. A. Khan and A. Nadeem, “Automated test data generation for coupling based inte­gration testing of object oriented programs using particle swarm optimization (PSO),” in 7th International Conference on Genetic and Evolutionary Computing (ICGEC), pp. 115–124, 2013. 2013
257 M. B. Bashir and A. Nadeem, “A ftness function for evolutionary mutation testing of object-oriented programs,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
258 S. A. Khan and A. Nadeem, “Coupling based integration testing: A ftness function,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
259 S. A. Khan and A. Nadeem, “A tool for data fow testing using evolutionary approaches (ETODF),” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
260 T. Masood, A. Nadeem, and S. Ali, “An automated approach to regression testing of web services based on WSDL operation changes,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2013. 2013
261 A. A. Haider, A. Nadeem, and S. Rafq, “Computational intelligence and safe reduction of test suite,” in 2013 IEEE 9th International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2013. 2013
262 A. A. Haider, A. Nadeem, and S. Rafq, “On the fy test suite optimization with fuzzyoptimizer,” in 2013 11th International Conference on Frontiers of Information Technology (FIT), pp. 101–106, IEEE, 2013. 2013
263 S. U. Rehman and A. Nadeem, “A critical analysis, Saudi international electronics,” in Communications and Photonics Conference (SIECPC 2013), Riyadh, KSA, IEEE, 2013. 2013
264 S. A. Khan and A. Nadeem, “Automated test data generation for coupling based integration testing of object oriented programs using evolutionary approaches,” in 2013 Tenth International Conference on Information Technology: New Generations (ITNG), pp. 369–374, IEEE, 2013. 2013
265 A. Khan and M. I. Khan, “Consequences of work family conficts on employee per­formance: Meditating role of job satisfaction (an empirical study of nursing industry of Pakistan),” in International Research Conference on Contemporary Management Practices, Lahore, 2013. 2013
266 P. A. Shah, M. Yousaf, A. Qayyum, and H. B. Hasbullah, “Efectiveness of multi-homing and parallel transmission during and after the vertical handover,” in 2012 International Conference on Computer & Information Science (ICCIS), vol. 2, pp. 625– 629, IEEE, 2012. 2012
267 P. A. Shah, S. Yasmin, S. Asghar, A. Qayyum, and H. B. Hasbullah, “A fuid fow model for SCTP trafc over the internet,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
268 E. Elahi, A. Qayyum, and S. Naz, “The efect of payload length on QoS in IEEE 802.11s wireless mesh networks,” in 2012 18th IEEE International Conference on Networks (ICON), pp. 70–73, IEEE, 2012. 2012
269 S. Kanwal, I. A. Taj, and A. Farooq, “A novel classifcation technique for cancer diag­nostics based on microarray gene expression profling (MGEP),” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
270 W. Ahmed, I. A. Taj, M. Ghafoor, and K. Shahzad, “Polar binary encoding of iris tex­ture for real-time personal identifcation,” in 2012 International Conference on Emerg­ing Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
271 S. A. Moiz, S. M. Imran, A. M. Nahhas, F. Rehman, M. M. Ahmed, H.-T. Kim, and J.-H. Lee, “Polaron hopping mechanism of conducting polymer,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
272 U. Rafque, S. A. Ali, M. A. Khan, and M. M. Ahmed, “A wideband slot-coupled inverted microstrip patch antenna for wireless communications,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–4, IEEE, 2012. 2012
273 W. Afzal, U. Rafque, M. M. Ahmed, M. A. Khan, and F. A. Mughal, “A tri-band H-shaped microstrip patch antenna for DCS and WLAN applications,” in 2012 19th In­ternational Conference on Microwave Radar and Wireless Communications (MIKON), vol. 1, pp. 256–258, IEEE, 2012. 2012
274 I. Khan, A. I. Bhatti, Q. Khan, and Q. Ahmad, “Sliding mode control of lateral dy­namics of an AUV,” in 2012 9th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 27–31, IEEE, 2012. 2012
275 S. S. H. Rizvi, A. I. Bhatti, Q. Khan, Q. Ahmad, A. Hameed, and Z. Butt, “Smooth sliding mode control for PEM fuel cell system,” in 2012 24th Chinese Control and Decision Conference (CCDC), pp. 3557–3562, IEEE, 2012. 2012
276 U. Ali, M. Z. Shah, R. Samar, and A. I. Bhatti, “Robust level fight control design for scaled Yak-54 unmanned aerial vehicle using single sliding surface,” in 2012 24th Chinese Control and Decision Conference (CCDC), pp. 1209–1214, IEEE, 2012. 2012
277 S. S. H. Rizvi, A. I. Bhatti, Q. Khan, Q. Ahmad, and A. Hameed, “HOSM control design of PEM fuel cell using super twisting algorithm,” in 2012 9th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 43–50, IEEE, 2012. 2012
278 G. Murtaza and A. I. Bhatti, “Control of DC motors using sliding mode,” in 2012 9th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 37–42, IEEE, 2012. 2012
279 M. A. Rizvi, Q. Raza, A. I. Bhatti, S. Zaidi, and M. Khan, “Modeling and simulation of SI engines for fault detection,” in Internal Combustion Engines, InTech, 2012. 2012
280 M. Asad, A. I. Bhatti, and S. Iqbal, “A novel reaching law for smooth sliding mode con­trol using inverse hyperbolic function,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
281 Y. A. Butt and A. I. Bhatti, “Robust altitude tracking of a helicopter using sliding mode control structure,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–7, IEEE, 2012. 2012
282 A. Yar and A. I. Bhatti, “Control of air-to-fuel ratio of spark ignited engine using super twisting algorithm,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2012. 2012
283 A. Arshad, A. I. Bhatti, R. Samar, Q. Ahmed, and E. Aamir, “Model development of ucg and calorifc value maintenance via sliding mode control,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
284 M. A. Rizvi, S. S. H. Zaidi, M. A. Akram, and A. I. Bhatti, “Misfre fault detection in SI engine using sliding mode observer,” in IECON 2012-38th Annual Conference on IEEE Industrial Electronics Society, pp. 5114–5119, IEEE, 2012. 2012
285 M. Z. Shah, R. Samar, and A. I. Bhatti, “Cross-track control of UAVs during circular and straight path following using sliding mode approach,” in 2012 12th International Conference on Control, Automation and Systems (ICCAS), pp. 185–190, IEEE, 2012. 2012
286 N. Mehdi, F. M. Malik, A. I. Bhatti, and N. Qaiser, “Sampled data dynamic surface control for inertia wheel pendulum,” in 2012 International Conference on Robotics and Artifcial Intelligence (ICRAI), pp. 91–95, IEEE, 2012. 2012
287 G. A. Mirza, N. Masood, and S. Asghar, “Formal representation and resolution of null value confict in database integration, Wuhan, China,” in The 2nd IEEE Conference on Computer and Management, vol. 2, pp. 1527–1533, 2012. 2012
288 S. Gillani, S. Naz, M. Naeem, M. T. Afzal, and A. Qayyum, “ERRAGMap: visualiza­tion tool,” in 2012 8th International Conference on Information Science and Digital Content Technology (ICIDT), vol. 3, pp. 736–740, IEEE, 2012. 2012
289 S. Naz, M. Naeem, M. T. Afzal, and A. Qayyum, “Expertise identifcation and visu­alization,” in 2012 8th International Conference on Computing and Networking Tech­nology (ICCNT), pp. 16–20, IEEE, 2012. 2012
290 N. Sharif, M. T. Afzal, and D. Helic, “A framework for resource recommendations for learners using social bookmarking,” in 2012 8th International Conference on Comput­ing and Networking Technology (ICCNT), pp. 71–76, IEEE, 2012. 2012
291 S. A. Khan, M. T. Afzal, and M. A. Qadir, “Exploiting title-keywords relation to develop concept classifer for scientifc community,” in International Conference on Networked Digital Technologies, pp. 438–448, Springer Berlin Heidelberg, 2012. 2012
292 M. Ahmad, M. A. Qadir, T. Ali, M. A. Abbas, and M. T. Afzal, “Semantic cache system,” in Semantics in Action-Applications and Scenarios, InTech, 2012. 2012
293 M. A. Abbas, M. A. Qadir, and M. T. Afzal, “Semantic cache reasoners,” in Semantics-Advances in Theories and Mathematical Models, InTech, 2012. 2012
294 M. A. Abbas, M. A. Qadir, M. Ahmad, and T. Ali, “Semantic aware implication and satisfability for conjunctive queries in semantic caching,” in International Conference on Networked Digital Technologies, pp. 44–54, Springer, Berlin, Heidelberg, 2012. 2012
295 S. Z. Ahmad, M. A. Qadir, and S. Khan, “Adaptive path ranking technique for maxi­mization of gains of bandwidth aggregation over heterogeneous wireless links,” in 2012 Seventh International Conference on Broadband, Wireless Computing, Communication and Applications (BWCCA), pp. 127–134, IEEE, 2012. 2012
296 A. Khan and M. I. Khan, “The impact of work family confict on employee’s perfor­mance in the nursing industry of Pakistan),” in International Conference on Emerging Trends in Management, Islamabad, 2012. 2012
297 M. B. Bashir and A. Nadeem, “Control oriented mutation testing for detection of poten­tial software bugs,” in 2012 10th International Conference on Frontiers of Information Technology (FIT), pp. 35–40, IEEE, 2012. 2012
298 A. A. Haider, S. Rafq, and A. Nadeem, “Test suite optimization using fuzzy logic,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
299 S. Ahmed and A. Nadeem, “A survey on mobile agent communication protocols,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
300 M. B. Bashir and A. Nadeem, “Object oriented mutation testing: A survey,” in 2012 International Conference on Emerging Technologies (ICET), pp. 1–6, IEEE, 2012. 2012
301 S. Naz, S. Asghar, S. Fong, and A. Qayyum, “Multi-way association clustering anal­ysis on adaptive real-time multicast data,” in International Conference on Networked Digital Technologies, pp. 383–394, Springer, 2011. 2011
302 M. M. Ali, M. Ghafoor, I. A. Taj, and K. Hayat, “Palm print recognition using oriented hausdorf distance transform,” in Frontiers of Information Technology (FIT), pp. 85– 88, IEEE, 2011. 2011
303 M. Ghafoor, U. I. Bajwa, and I. A. Taj, “Fuel nozzle spray pattern classifer,” in Frontiers of Information Technology (FIT), pp. 303–307, IEEE, 2011. 2011
304 H. Qayyum and M. Ashraf, “Performance comparison of direction-of-arrival estima­tion algorithms for towed array sonar system,” in Digital Information Processing and Communications, pp. 509–517, Springer, 2011. 2011
305 U. Rafque, G. I. Kiani, M. M. Ahmed, and S. Habib, “Frequency selective surface absorber for WLAN security,” in Proceedings of the 5th European Conference on An­tennas and Propagation (EUCAP), pp. 872–875, IEEE, 2011. 2011
306 U. Rafque, M. M. Ahmed, M. A. Haq, and M. T. Rana, “Transmission of RF signals through energy efcient window using FSS,” in 2011 7th International Conference on Emerging Technologies (ICET), pp. 1–4, IEEE, 2011. 2011
307 S. Iqbal, C. Edwards, and A. I. Bhatti, “Robust feedback linearization using higher order sliding mode observer,” in 2011 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC), pp. 7968–7973, IEEE, 2011. 2011
308 M. Z. Shah, R. Samar, and A. I. Bhatti, “Sliding mode based lateral control for UAVs using piecewise linear sliding surface,” in 2011 International Conference on Commu­nications, Computing and Control Applications (CCCA), pp. 1–6, IEEE, 2011. 2011
309 S. Liaqat, S. A. Khan, M. B. Ihsan, S. Z. Asghar, A. Ejaz, and A. I. Bhatti, “Automatic recognition of ground radar targets based on target RCS and short time spectrum variance,” in 2011 International Symposium on Innovations in Intelligent Systems and Applications (INISTA), pp. 164–167, IEEE, 2011. 2011
310 G. Jabeen and N. Masood, “Tuned schema merging (tusme),” in 2011 5th Interna­tional Conference on Software, Knowledge Information, Industrial Management and Applications (SKIMA), pp. 1–7, IEEE, 2011. 2011
311 S. A. Khan, M. T. Afzal, A. B. Nawab, M. A. Qadir, and A. Shahid, “Recommending contextualized research directions for scientifc community,” in International Confer­ence on Computers and Emerging Science (ICCET) , Khair Pur, Pakistan, 2011. 2011
312 A. Shahid, M. T. Afzal, and M. A. Qadir, “Does citation frequency discover semantic relatedness,” in International Conference on Computers and Emerging Science (IC­CET), Khair Pur, Pakistan, 2011. 2011
313 A. Khalid, M. T. Afzal, and M. A. Qadir, “Building a classifcation scheme for citation functions,” in International Conference on Internet and Web Engineering (ICIWE), Kuala Lampur, Malaysia, 2011. 2011
314 N. A. Sajid, T. Ali, M. T. Afzal, M. Ahmad, and M. A. Qadir, “Exploiting reference section to classify paper’s topics,” in Proceedings of the International Conference on Management of Emergent Digital EcoSystems, pp. 220–225, ACM, 2011. 2011
315 M. A. Raza, M. T. Afzal, and A. Khanum, “Discovering, structuring and visualizing organizations from linked open data,” in 2011 6th International Conference on Com­puter Sciences and Convergence Information Technology (ICCIT), pp. 738–744, IEEE, 2011. 2011
316 M. Naqvi, A. U. Mailk, S. Razzaq, and M. T. Afzal, “Extraction and visualization of citation network,” in 2011 International Conference on Computer Networks and Information Technology (ICCNIT), pp. 205–209, IEEE, 2011. 2011
317 M. Naqvi, A. Usman, S. Batool, and T. Afzal, “Finding scientifc experts of ACM cat­egories based on temporal association rule mining,” in 2011 International Conference on Computer Networks and Information Technology (ICCNIT), pp. 273–277, IEEE, 2011. 2011
318 M. A. Abbas, M. A. Qadir, M. Ahmad, T. Ali, and N. A. Sajid, “Graph based query trimming of conjunctive queries in semantic caching,” in 2011 7th International Con­ference on Emerging Technologies (ICET), pp. 1–5, IEEE, 2011. 2011
319 S. Khan, S. Z. Ahmed, and M. A. Qadir, “Throughput enhancement of simultane­ous multipath communication using modifed fast retransmit scheme,” in 2011 Inter­national Conference on Computer Networks and Information Technology (ICCNIT), pp. 9–12, IEEE, 2011. 2011
320 A. Khalid, M. T. Afzal, and M. A. Qadir, “Citation network visualization of CiteSeer dataset,” in 2011 6th International Conference on Computer Sciences and Convergence Information Technology (ICCIT), pp. 367–370, IEEE, 2011. 2011
321 A. Khalid, M. T. Afzal, and M. A. Qadir, “Restructuring citaiton reasons,” in 3rd International Conference on Computer Engineering and Technology (ICCET 2011), ASME Press, 2011. 2011
322 Z. Hassan and M. A. Qadir, “MinG: An efcient algorithm to mine graphs for se­mantic associations,” in 2011 International Conference on Computer Networks and Information Technology (ICCNIT), pp. 59–64, IEEE, 2011. 2011
323 Z. Khai, A. Nadeem, and G.-s. Lee, “A prolog based approach to consistency checking of UML class and sequence diagrams,” in International Conference on Advanced Software Engineering and its Applications (ASEA), Jeju Island, Korea, vol. 57, Springer, 2011. 2011
324 T. Masood, A. Nadeem, and G.-s. Lee, “A safe regression testing technique for web services based on WSDL specifcation,” in International Conference on Advanced Soft­ware Engineering and its Applications (ASEA), Jeju Island, Korea, vol. 57, Springer, 2011. 2011
325 S. U. Rehman and A. Nadeem, “AgentSpeak (L) based testing of autonomous agents,” in International Conference on Advanced Software Engineering and Its Applications (ASEA), Jeju Island, Korea, pp. 11–20, Springer, 2011. 2011
326 S. A. Khan and A. Nadeem, “Applying evolutionary approaches to data fow testing at unit level,” in International Conference on Advanced Software Engineering and Its Applications (ASEA), Jeju Island, Korea, Springer, 2011. 2011
327 Z. Khalid, S. Sameen, and S. I. Malik, “In silico mining of RAS gene family expression data in human thyroid cancer,” in 2011 5th International Conference on Bioinformatics and Biomedical Engineering,(iCBBE), pp. 1–4, IEEE, 2011. 2011
328 A. Vaseer and M. I. Khan, “The impact of internal marketing on faculty job satisfac­tion: An empirical study of public and private universities in Pakistan,” in Interna­tional Business Information Management Conference (16th IBIMA), Kuala Lumpur, Malaysia, 2011. 2011
329 M. I. Khan and M. A. Qureshi, “Global entrepreneurship: A technical portrait for black and white entrepreneurship in networked world,” in Global Business Research Conference, Beijing, China, 2011. 2011
330 M. I. Khan, M. A. Qureshi, and Q. Abbas, “Globalization: Ofshore outsourcing of information systems,” in Global Business Research Conference, Beijing, China, 2011. 2011
331 M. Aazam, I. Khan, M. Alam, and A. Qayyum, “Comparison of IPv6 tunneled traf­fc of teredo and ISATAP over test-bed setup,” in 2010 International Conference on Information and Emerging Technologies (ICIET), pp. 1–4, IEEE, 2010. 2010
332 E. Elahi, N. Hassan, S. Asghar, and A. Qayyum, “Performance modeling of bandwidth aggregation for TCP connections,” in 2010 12th IEEE International Conference on High Performance Computing and Communications (HPCC), pp. 689–694, IEEE, 2010. 2010
333 E. Elahi, M. Yousaf, A. Sheikh, M. M. Rehan, M. O. Chughtai, and A. Qayyum, “On the implementation of end-to-end mobility management framework (EMF),” in 2010 IEEE 6th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob), pp. 458–465, IEEE, 2010. 2010
334 M. Aazam, S. A. H. Shah, I. Khan, and A. Qayyum, “Deployment and performance evaluation of teredo and ISATAP over real test-bed setup,” in Proceedings of the In­ternational Conference on Management of Emergent Digital Ecosystems, pp. 229–233, ACM, 2010. 2010
335 S. Yasmin, M. Yousaf, and A. Qayyum, “Security issues related with DNS dynamic updates for mobile nodes: A survey,” in Proceedings of the 8th International Conference on Frontiers of Information Technology, p. 17, ACM, 2010. 2010
336 M. Asif, M. Farooq, and I. A. Taj, “Optimized implementation of motion compensation for H.264 decoder,” in 2010 5th International Conference on Computer Sciences and Convergence Information Technology (ICCIT), pp. 216–221, IEEE, 2010. 2010
337 N. A. Khan, I. A. Taj, and M. N. Jafri, “Instantaneous frequency estimation using fractional fourier transform and wigner distribution,” in International Conference on Signal Acquisition and Processing-ICSAP’10, pp. 319–321, IEEE, 2010. 2010
338 I. Sajid, S. G. Ziavras, and M. M. Ahmed, “Hardware-based speed up of face recognition towards real-time performance,” in 2010 13th Euromicro Conference on Digital System Design: Architectures, Methods and Tools (DSD), pp. 763–770, IEEE, 2010. 2010
339 I. Sajid, M. M. Ahmed, and M. Sahgeer, “FPGA-based optimized architecture for face recognition using fxed point householder algorithm,” in 2010 4th International Confer­ence on New Trends in Information Science and Service Science (NISS), pp. 139–144, IEEE, 2010. 2010
340 I. Sajid, M. M. Ahmed, and S. G. Ziavras, “Pipelined implementation of fxed point square root in FPGA using modifed non-restoring algorithm,” in 2010 The 2nd In­ternational Conference on Computer and Automation Engineering (ICCAE), vol. 3, pp. 226–230, IEEE, 2010. 2010
341 Q. Ahmed, A. I. Bhatti, S. Iqbal, and I. H. Kazmi, “2-sliding mode based robust control for 2-DOF helicopter,” in 2010 11th International Workshop on Variable Structure Systems (VSS), pp. 481–486, IEEE, 2010. 2010
342 M. Z. Shah, R. Samar, and A. I. Bhatti, “Adaptive sliding mode roll control of a canard-controlled missile,” in 2010 Chinese Control and Decision Conference (CCDC), pp. 2808–2813, IEEE, 2010. 2010
343 S. Iqbal, C. Edwards, and A. I. Bhatti, “A smooth second-order sliding mode controller for relative degree two systems,” in IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society, pp. 2379–2384, IEEE, 2010. 2010
344 Q. Ahmed and A. I. Bhatti, “Second order sliding mode observer for estimation of SI engine volumetric efciency & throttle discharge coefcient,” in 2010 11th International Workshop on Variable Structure Systems (VSS), pp. 307–312, IEEE, 2010. 2010
345 I. H. Kazmi, A. I. Bhatti, and M. Iqbal, “Parameter estimation of PEMFC system with unknown input,” in 2010 11th International Workshop on Variable Structure Systems (VSS), pp. 301–306, IEEE, 2010. 2010
346 T. Hussain, S. Asghar, and N. Masood, “Web usage mining: A survey on preprocess­ing of web log fle,” in 2010 International Conference on Information and Emerging Technologies (ICIET), pp. 1–6, IEEE, 2010. 2010
347 G. A. Mirza, N. Masood, and S. Asghar, “A survey of data level conficts in database integration,” in SKIMA 2010, p. 2, 2010. 2010
348 A. Latif, M. T. Afzal, and K. Tochtermann, “Constructing experts profles from linked open data,” in 2010 6th International Conference on Emerging Technologies (ICET), pp. 33–38, IEEE, 2010. 2010
349 T. Ali, M. A. Qadir, and M. Ahmad, “Translation of relational queries into descrip­tion logic for semantic cache query processing,” in 2010 International Conference on Information and Emerging Technologies (ICIET), pp. 1–6, IEEE, 2010. 2010
350 T. Ali and M. A. Qadir, “DL based subsumption analysis for relational semantic cache query processing and management,” in 10th International Conference on Knowledge Management and Knowledge Technologies, Messe Congress Graz, Austria, pp. 1–3, 2010. 2010
351 M. Fahad, N. Moalla, A. Bouras, M. A. Qadir, and M. Farukh, “Disjoint-knowledge analysis and preservation in ontology merging process,” in 2010 Fifth International Conference on Software Engineering Advances (ICSEA), pp. 422–428, IEEE, 2010. 2010
352 M. Ahmad, S. Asghar, M. A. Qadir, and T. Ali, “Graph based query trimming algo­rithm for relational data semantic cache,” in Proceedings of the International Confer­ence on Management of Emergent Digital EcoSystems, pp. 47–52, ACM, 2010. 2010
353 S. Nazir, M. T. Afzal, M. A. Qadir, and H. Maurer, “CAOWL-SAI: context aware OWL based semantic association inference,” in 2010 Sixth International Conference on Networked Computing and Advanced Information Management (NCM), pp. 746– 751, IEEE, 2010. 2010
354 S. A. Khan and M. A. Qadir, “A genaric framework for evaluation of ontology to relational database transformation process,” in 2010 International Conference on In­formation and Emerging Technologies (ICIET), pp. 1–5, IEEE, 2010. 2010
355 M. Fahad, N. Moalla, A. Bouras, M. A. Qadir, and M. Farukh, “A semantic approach for classifcation of web ontologies,” in Proc. 10th International Conference on Knowl­edge Management and Knowledge Technologies, J. UCS, Graz Austria, pp. 69–80, 2010. 2010
356 S. Z. Ahmad, M. A. Qadir, and A. Bouras, “An opportunistic multi-server scheduling approach for service guarantees through mobile routers,” in 2010 Second International Conference on Advances in Future Internet (AFIN), pp. 63–68, IEEE, 2010. 2010
357 N. I. Qazi and M. A. Qadir, “Algorithms to evaluate ontologies based on extended error taxonomy,” in 2010 International Conference on Information and Emerging Technolo­gies (ICIET), pp. 1–6, IEEE, 2010. 2010
358 R. Ahmad, A. Nadeem, T.-h. Kim, et al., “ISARE: an integrated software architecture reuse and evaluation framework,” in International Conference on Advanced Software Engineering and Its Applications, pp. 174–187, Springer, 2010. 2010
359 M. Ahmad, A. Nadeem, and T.-h. Kim, “An automated approach to testing poly­morphic features using object-Z,” in International Conference on Advanced Software Engineering and its Applications (ASEA), Jeju Island, Korea, Springer, 2010. 2010
360 M. A. Ahmad and A. Nadeem, “Consistency checking of UML models using description logics: A critical review,” in 2010 6th International Conference on Emerging Technolo­gies (ICET), pp. 310–315, IEEE, 2010. 2010
361 S. Khalid and A. Nadeem, “Automated generation of fnite state machine from object-oriented formal specifcations,” in 2010 6th International Conference on Emerging Technologies (ICET), pp. 304–309, IEEE, 2010. 2010
362 S. A. Khan and A. Nadeem, “UML extensions for modeling of aspect oriented software: a survey,” in Proceedings of the 2010 National Software Engineering Conference, p. 5, ACM, 2010. 2010
363 K. Latif, M. A. B. U. Rahim, A. Rauf, and A. Nadeem, “Evaluation of UML-real time profles for industrial control systems,” in 2010 International Conference on Informa­tion and Emerging Technologies (ICIET), pp. 1–5, IEEE, 2010. 2010
364 M. I. Khan and A. Muzafar, “The trust solution for business issues in knowledge economy (e-security),” in Proceedings of the International Conference on Information and Knowledge Engineering Singapore, 2010. 2010
365 I. Khan and W. Ahmed, “The plagiarism prevention model for higher education in South Asia,” in Proceedings of Edulearn10 International Conference On Education And New Learning Technologies, pp. 2752–2756, IATED, 2010. 2010
366 I. Khan and W. Ahmad, “E-education: E-readiness model for educational institutions (global education & training perspective),” in EDULEARN10 Proceedings, pp. 6800– 6806, IATED, 2010. 2010
367 M. I. Khan, M. A. Qureshi, and Q. Abbas, “Agile methodology in software devel­opment (SMEs) of Pakistan software industry for successful software projects (CMM framework),” in 2010 International Conference on Educational and Network Technol­ogy (ICENT), pp. 576–580, IEEE, 2010. 2010
368 M. I. Khan, H. A. Talpur, and M. A. Qureshi, “The emergence of silver bullets trans­forming Pakistan to knowledge economy,” in Proceedings of the 14th IBIMA conference on Global Business Transformation through Innovation and Knowledge Management, Istanbul, Turkey, 2010. 2010
369 M. I. Khan, Q. M. A, and Q. Abbas, “Data warehouse failure prevention model (busi­ness intelligence perspective),” in Proceedings of the 14th IBIMA conference on Global Business Transformation through Innovation and Knowledge Management, Istanbul, Turkey, 2010. 2010
370 M. I. Khan, Q. M. A, and Q. Abbas, “Global outsourcing: Investigation of critical success factors in global software (ICT) projects,” in International Conference on In­formation and Communication Technologies, Tokyo, Japan, 2010. 2010
371 M. I. Khan and M. A. Qureshi, “Past, present and future: The establishment of entrepreneurship development centres in the world (global comparison perspective),” in 2nd International Conference on Business, Technology and Engineering (ICBTE), Islamabad, 2010. 2010
372 S. A. Moiz, M. M. Ahmed, K. S. Karimov, and F. Rehman, “Organic semiconduc­tor based optical sensor,” in International Symposium of Advanced Materials (ISAM 2009), Pakistan, 2009. 2009
373 M. M. Ahmed, S. A. Moiz, et al., “Steering control of nonholonomic control systems using model decomposition: A fre truck example,” in 2nd International Conference on Computer, Control and Communication-IC4 2009, pp. 1–8, IEEE, 2009. 2009
374 M. Rehan, M. Yousaf, A. Qayyum, and S. A. Malik, “A cross-layer user centric vertical handover decision approach based on MIH local triggers,” in WMNC/PWC, pp. 359– 369, Springer, 2009. 2009
375 U. Shaukat, A. Qayyum, and S. Hussain, “Performance evaluation of multicast pro­tocols for multimedia trafc,” in International Conference on Emerging Technologies-ICET 2009, pp. 383–388, IEEE, 2009. 2009
376 P. A. Shah, M. Rehan, H. M. O. Chughtai, and A. Qayyum, “On reducing throughput degradation of TCP connection after vertical handover,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–4, IEEE, 2009. 2009
377 I. Khan and A. Qayyum, “Performance evaluation of AODV and OLSR in highly fading vehicular ad hoc network environments,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–5, IEEE, 2009. 2009
378 E. Ahmed, M. Aazam, and A. Qayyum, “Comparison of various IPv6 fow label formats for end-to-end QoS provisioning,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–5, IEEE, 2009. 2009
379 U. Shaukat and A. Qayyum, “MPEMM: Multi-perspective performance evaluation model for multicast,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–5, IEEE, 2009. 2009
380 P. A. Shah, M. Yousaf, A. Qayyum, and S. A. Malik, “An analysis of service disrup­tion time for TCP applications using end-to-end mobility management protocols,” in Proceedings of the 7th International Conference on Advances in Mobile Computing and Multimedia, pp. 360–364, ACM, 2009. 2009
381 D. Mirza, I. A. Taj, and A. Khalid, “A robust eyelid and eyelash removal method and a local binarization based feature extraction technique for iris recognition system,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
382 Z. E. Bhatti, U. I. Bajwa, and I. A. Taj, “Introducing set of internal parameters for Laplacian faces to enhance performance under varying conditions,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–5, IEEE, 2009. 2009
383 R. Mehmood, M. U. Ali, and I. A. Taj, “Applying centroid based adjustment to ker­nel based object tracking for improving localization,” in International Conference on Information and Communication Technologies-ICICT’09, pp. 209–214, IEEE, 2009. 2009
384 R. R. Sheikh and I. A. Taj, “Cardiac disorder diagnosis based on ECG segments anal­ysis and classifcation,” in Third International Conference on Electrical Engineering­ICEE’09, pp. 1–6, IEEE, 2009. 2009
385 N. M. Memon, M. M. Ahmed, and S. A. Moiz, “Extraction of intrinsic AC parameters of mm wavelength GaAs HEMTs from measured DC characteristics,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–7, IEEE, 2009. 2009
386 S. M. Imran, S. A. Moiz, M. M. Ahmed, J.-H. Lee, and H.-T. Kim, “Structural charac­terization of the silver-polyaniline nanocomposite for electronic devices,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–4, IEEE, 2009. 2009
387 Q. Ahmed, A. I. Bhatti, and S. Iqbal, “Nonlinear robust decoupling control design for twin rotor system,” in 7th Asian Control Conference-ASCC 2009, pp. 937–942, IEEE, 2009. 2009
388 M. Iqbal, A. I. Bhatti, S. Iqbal, Q. Khan, and I. H. Kazmi, “Parameter estimation of uncertain nonlinear MIMO three tank systems using higher order sliding modes,” in IEEE International Conference on Control and Automation-ICCA 2009, pp. 1931– 1936, IEEE, 2009. 2009
389 Q. Ahmed, A. I. Bhatti, and S. Iqbal, “Robust decoupling control design for twin rotor system using hadamard weights,” in 2009 IEEE Control Applications, (CCA) & Intelligent Control, (ISIC), pp. 1009–1014, IEEE, 2009. 2009
390 M. Iqbal, A. I. Bhatti, S. Iqbal, Q. Khan, and I. H. Kazmi, “Fault diagnosis of nonlinear systems using higher order sliding mode technique,” in 7th Asian Control Conference-ASCC 2009, pp. 875–880, IEEE, 2009. 2009
391 M. Rafq, S. U. Rehman, Q. R. Butt, and A. I. Bhatti, “Power efcient sliding mode control of SR motor for speed control applications,” in IEEE 13th International Mul­titopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
392 Q. R. Butt, A. I. Bhatti, M. Iqbal, M. A. Rizwi, R. Mufti, and I. H. Kazmi, “Estima­tion of automotive engine parameters: Part I: Discharge coefcient of throttle body,” in 2009 6th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 275–280, IEEE, 2009. 2009
393 M. A. Rizvi and A. I. Bhatti, “Hybrid model for early detection of misfre fault in SI engines,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
394 M. A. Rizvi, A. I. Bhatti, and Q. R. Butt, “Fault detection in a class of hybrid system,” in International Conference on Emerging Technologies-ICET 2009, pp. 130–135, IEEE, 2009. 2009
395 I. H. Kazmi, A. I. Bhatti, and S. Iqbal, “A nonlinear observer for PEM fuel cell system,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
396 S. H. Qaiser, A. I. Bhatti, M. Iqbal, and J. Qadir, “LMI-based robust control system design for a research reactor,” in 2009 6th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 207–211, IEEE, 2009. 2009
397 M. Iqbal, A. I. Bhatti, S. Iqbal, and Q. R. Butt, “LMI based controller synthesis of an uncertain three tank system,” in 2009 6th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 192–196, IEEE, 2009. 2009
398 H. Z. Bukhar, A. I. Bhatti, M. F. Aftab, and K. Shafq, “Multi-objective controller for control moment gyro (CMG) using LMI,” in 2009 6th International Bhurban Confer­ence on Applied Sciences and Technology (IBCAST), pp. 203–206, IEEE, 2009. 2009
399 M. Iqbal, A. I. Bhatti, and Q. Khan, “Dynamic sliding modes control of uncertain non­linear MIMO three tank system,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–7, IEEE, 2009. 2009
400 S. H. Qaiser, A. I. Bhatti, M. Iqbal, R. Samar, and J. Qadir, “Non linear model validation and second order sliding mode controller design for a research reactor,” in IEEE International Conference on Industrial Technology-ICIT 2009, pp. 1–6, IEEE, 2009. 2009
401 I. H. Kazmi and A. I. Bhatti, “Robust controller using LMI framework for PEM fuel cell system,” in International Conference on Emerging Technologies-ICET 2009, pp. 136– 141, IEEE, 2009. 2009
402 K. Shafq, M. Imran, H. Z. Bukhari, S. Ahmed, and A. I. Bhatti, “LMI based multi-objective state-feedback controller design for magnetic levitation system,” in 2009 6th International Bhurban Conference on Applied Sciences and Technology (IBCAST), pp. 197–202, IEEE, 2009. 2009
403 N. M. Dar and N. Zahra, “Generic metadata repository for a data warehouse,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
404 A. Khalid, S. A. H. Shah, and M. A. Qadir, “OntRel: An ontology indexer to store OWL-DL ontologies and its instances,” in International Conference of Soft Computing and Pattern Recognition-SOCPAR’09, pp. 478–483, IEEE, 2009. 2009
405 M. Fahad and M. A. Qadir, “Similarity computation by ontology merging sys­tem: DKP-OM,” in 2nd International Conference on Computer, Control and Communication-IC4 2009, pp. 1–6, IEEE, 2009. 2009
406 M. A. Abbas and M. A. Qadir, “Cross attribute knowledge: A missing concept in semantic cache query processing,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
407 M. Ahmad, M. A. Qadir, M. Sanaullah, and M. F. Bashir, “An efcient query matching algorithm for relational data semantic cache,” in 2nd International Conference on Computer, Control and Communication-IC4 2009, pp. 1–6, IEEE, 2009. 2009
408 S. Z. Ahmad, M. A. Qadir, and M. S. Akbar, “Service optimization of in-elastic fows stripped over multiple asymmetric mobile channels,” in IEEE 13th International Mul­titopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
409 S. Z. Ahmad, M. A. Qadir, and M. S. Akbar, “Dependable quality-of-service provision­ing through aggregate scheduling of multiple service classes on heterogeneous wireless channels,” in First International Conference on Future Information Networks-ICFIN 2009, pp. 167–172, IEEE, 2009. 2009
410 A. K. Malik, M. A. Qadir, N. Iftikhar, and M. Usman, “Constraint-based query dis­tribution framework for an integrated global schema,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
411 M. S. Akbar, S. Z. Ahmad, and M. A. Qadir, “Adaptive congestion control mechanism of TCP fows for performance optimization in mobile heterogeneous wireless networks,” in 2nd International Conference on Computer, Control and Communication-IC4 2009, pp. 1–6, IEEE, 2009. 2009
412 S. Hussain and M. A. Qadir, “Detection of crashed objects in eACID and its compari­sion with other techniques,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
413 S. Hussain and M. A. Qadir, “A benchmark for fault monitors in distributed systems,” in International Conference on Emerging Technologies-ICET 2009, pp. 94–101, IEEE, 2009. 2009
414 N. Noureen and M. A. Qadir, “BiSim: A simple and efcient biclustering algorithm,” in International Conference of Soft Computing and Pattern Recognition-SOCPAR’09, pp. 1–6, IEEE, 2009. 2009
415 S. Hussain and M. A. Qadir, “Extensive experimentation with eACID,” in International Conference on Emerging Technologies-ICET 2009, pp. 377–382, IEEE, 2009. 2009
416 S. Sayyab, A. Nadeem, and S. Fazal, “BVirusGS: DNA analysis toolkit for Bego­movirus genome analysis,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1–5, IEEE, 2009. 2009
417 L. Shoaib, A. Nadeem, and A. Akbar, “An empirical evaluation of the infuence of human personality on exploratory software testing,” in IEEE 13th International Mul­titopic Conference-INMIC 2009, pp. 1–6, IEEE, 2009. 2009
418 M. B. Bashir, A. Nadeem, and N. Masood, “Fitness function design for evolutionary testing of object-oriented programs: A survey,” in International Conference on Soft­ware, Knowledge and Information Management and Applications (SKIMA 2009), Fes, Morocco, IEEE, 2009. 2009
419 S. Manzoor, A. Nadeem, and N. Masood, “A survey of change identifcation techniques for regression testing,” in International Conference on Software, Knowledge and Infor­mation Management and Applications (SKIMA 2009), Fes, Morocco, IEEE, 2009. 2009
420 S. Manzoor and A. Nadeem, “Identifying data member level changes for regression testing of object-oriented programs,” in SERA (selected papers), pp. 191–201, Springer, 2009. 2009
421 M. Bashir and A. Nadeem, “A state based ftness function for evolutionary testing of object-oriented programs,” in 7th ACIS International Conference on Software Engi­neering Research, Management and Applications (SERA 2009), Haikou, Hainan Is­land, China, Springer, 2009. 2009
422 M. G. Nabi and A. Nadeem, “A formal model for English auction protocol,” in 7th ACIS International Conference on Software Engineering Research, Management and Applications-SERA’09, pp. 119–126, IEEE, 2009. 2009
423 S. U. R. Khan, I. U. Rehman, and S. U. R. Malik, “The impact of test case reduction and prioritization on software testing efectiveness,” in International Conference on Emerging Technologies-ICET 2009, pp. 416–421, IEEE, 2009. 2009
424 Z. Zaman, A. Nadeem, and F. Yousuf, “Data fow based testing of aspect oriented programs: A survey,” in International Conference of Software Engineering Theory and Practice (SETP 2009), Orlando, Florida, USA, pp. 98–104, 2009. 2009
425 M. M. Khokhar, M. J. Rehman, and A. Nadeem, “Heuristics for identifying error-prone segments of code,” in Proceedings of the International Workshop on Software Systems (IWSS) Istanbul, Turkey, 2009. 2009
426 N. Noureen, N. Kulsoom, A. de la Fuente, S. Fazal, and S. I. Malik, “Functional and promoter enrichment based analysis of biclustering algorithms using gene expression data of yeast,” in IEEE 13th International Multitopic Conference-INMIC 2009, pp. 1– 6, IEEE, 2009. 2009
427 M. I. Khan and M. Malik, “E-banking: The comparative analysis of e-banking sector of Pakistan,” in The 2009 International Conference on e-Technology (e-Tech), Singapore, 2009. 2009
428 M. I. Khan, M. A. Qureshi, and A. Hafz, “The impact of ofshore software business on IT professionals profles,” in 2nd COMSATS International Business Research Con­ference, Lahore, 2009. 2009
429 M. I. Khan, “The litmus test for emergence of electronic wave in academic sector of Pakistan,” in 2nd Electronic Learning and Distance Education Conference, Islamabad, 2009. 2009
430 M. Yousaf and A. Qayyum, “On end-to-end mobility management in 4G heteroge­neous wireless networks,” in IEEE International Networking and Communications Conference-INCC 2008, pp. 118–123, IEEE, 2008. 2008
431 I. Sajid, M. M. Ahmed, and I. Taj, “Design and implementation of a face recognition system using fast PCA,” in International Symposium on Computer Science and its Applications-CSA’08, pp. 126–130, IEEE, 2008. 2008
432 N. Masood and O. Iqbal, “Conceptual and context based combination of schema match­ers,” in 4th International Conference on Emerging Technologies-ICET 2008, pp. 269– 274, IEEE, 2008. 2008
433 S. Hussain and M. A. Qadir, “Enhanced adaptive, convergent and intelligent fault mon­itoring in distributed systems (eACID): Working and analysis,” in IEEE International Multitopic Conference-INMIC 2008, pp. 463–467, IEEE, 2008. 2008
434 M. Ahmad, M. A. Qadir, and M. Sanaullah, “Query processing over relational databases with semantic cache: A survey,” in IEEE International Multitopic Conference-INMIC 2008, pp. 558–564, IEEE, 2008. 2008
435 M. Fahad, M. A. Qadir, and S. A. H. Shah, “Evaluation of ontologies and DL rea­soners,” in International Conference on Intelligent Information Processing, pp. 17–27, Springer, Boston, MA, 2008. 2008
436 S. Z. Ahmad, M. A. Qadir, and M. S. Akbar, “A distributed resource management scheme for load-balanced QoS provisioning in heterogeneous mobile wireless networks,” in Proceedings of the 4th ACM symposium on QoS and security for wireless and mobile networks, pp. 63–70, ACM, 2008. 2008
437 S. A. H. Shah, A. Khalid, and M. A. Qadir, “Ontofetcher: An approach for query generation to gather ontologies and ranking them by ensuring user’s context,” in 4th International Conference on Emerging Technologies-ICET 2008, pp. 247–252, IEEE, 2008. 2008
438 S. Hussain and M. A. Qadir, “ACID: Adaptive, convergent, and intelligent fault monitoring for distributed systems,” in 4th International Conference on Emerging Technologies-ICET 2008, pp. 126–131, IEEE, 2008. 2008
439 A. Razaque, S. H. K. Banuri, K. Shahzad, M. A. Qadir, and M. Ahmad, “Analyis of TCP variants at various link error rates under mobility aware anchor point node hybrid network,” in Proceedings of the Mosharaka International Conference on Com­munications, Signals and Coding, pp. 60–65, IEEE, 2008. 2008
440 A. Razaque, K. Shahzad, and M. A. Qadir, “Analytical comparison of TCP variants under mobility aware Anchor Point Node (APN) hybrid network,” in Proceedings of the Mosharaka International Conference on Communications, Signals and Coding, pp. 66– 71, IEEE, 2008. 2008
441 M. Fahad, M. A. Qadir, and M. W. Noshairwan, “Ontological errors-inconsistency, incompleteness and redundancy,” in ICEIS (3-2), pp. 253–285, 2008. 2008
442 S. Z. Ahmad, M. S. Akbar, and M. A. Qadir, “Towards dependable wireless networks a QoS constraint resource management scheme in heterogeneous environment,” in 4th International Conference on Emerging Technologies-ICET 2008, pp. 182–186, IEEE, 2008. 2008
443 M. Sanaullah, M. A. Qadir, and M. Ahmad, “SCAD-XML: Semantic cache architecture for XML data fles using Xpath with cases and rules,” in IEEE International Multitopic Conference-INMIC 2008, pp. 361–367, IEEE, 2008. 2008
444 M. Usman, A. Nadeem, and T.-H. Kim, “UJECTOR: a tool for executable code gen­eration from UML models,” in Advanced Software Engineering and Its Applications, pp. 165–170, IEEE, 2008. 2008
445 F. Yousuf, A. Nadeem, Z. Zaman, T.-H. Kim, and M.-K. Choi, “Design diverse-multiple version connector: A fault tolerant component based architecture,” in Advanced Soft­ware Engineering and Its Applications, pp. 128–133, IEEE, 2008. 2008
446 A. A. A. Jilani, A. Nadeem, T.-H. Kim, and E.-S. Cho, “Formal representations of the data fow diagram: A survey,” in Advanced Software Engineering and Its Applications, pp. 153–158, IEEE, 2008. 2008
447 M. Usman, A. Nadeem, T.-H. Kim, and E.-S. Cho, “A survey of consistency checking techniques for UML models,” in Advanced Software Engineering and Its Applications, pp. 57–62, IEEE, 2008. 2008
448 M. Latif and A. Nadeem, “Automatic extraction of pre-and post-conditions from z-specifcations,” in Software Engineering Research, Management and Applications, pp. 101–114, Springer, 2008. 2008
449 M. N. Qamar, A. Nadeem, M. U. Khan, and M. Ali, “An automatable framework for formal specifcation & verifcation of aspect oriented programs,” in Workshop on Crit­ical System Development Using Modeling Languages 2006 (CSDUML-06) co-located with ACM/IEEE MoDELS 2006 Conference Genova, Italy, 2008. 2008
450 I. Khan, “E-business: The security socket layer devalues e-business in Pakistan,” in CSREA EEE, pp. 486–492, 2008. 2008
451 M. A. Qadir and W. Noshairwan, “Warnings for disjoint knowledge omission in on­tologies,” in Second International Conference on Internet and Web Applications and Services-ICIW’07, pp. 45–45, IEEE, 2007. 2007
452 M. Fahad, M. A. Qadir, and M. W. Noshairwan, “Semantic inconsistency errors in ontology,” in IEEE International Conference on Granular Computing-GRC 2007, pp. 283–283, IEEE, 2007. 2007
453 M. Fahad, M. A. Qadir, M. W. Noshairwan, and N. Iftakhir, “DKP-OM: A semantic based ontology merger,” in Proc. 3rd International Conference I-Semantics, pp. 313– 322, 2007. 2007
454 W. Noshairwan, M. A. Qadir, and M. Fahad, “Sufcient knowledge omission error and redundant disjoint relation in ontology,” in Advances in Intelligent Web Mastering, pp. 260–265, Springer, Berlin, Heidelberg, 2007. 2007
455 M. A. Qadir, M. Fahad, and M. W. Noshairwan, “On conceptualization mismatches between ontologies,” in IEEE International Conference on Granular Computing-GRC 2007, pp. 275–275, IEEE, 2007. 2007
456 S. Z. Ahmad, M. S. Akbar, and M. A. Qadir, “A cross-layer vertical handover deci­sion model for heterogeneous wireless networks,” in 4th International Conference on Innovations in Information Technology-IIT’07, pp. 441–445, IEEE, 2007. 2007
457 M. F. Bashir, R. A. Zaheer, Z. M. Shams, and M. A. Qadir, “SCAM: Semantic caching architecture for efcient content matching over data grid,” in Advances in Intelligent Web Mastering, pp. 41–46, Springer, Berlin, Heidelberg, 2007. 2007
458 N. Iftikhar, M. A. Qadir, and O. A. Hamid, “Group profle and ontology-based semantic annotation of multimedia data for efcient retrieval,” in Held in conjunction with the 6th International and Interdisciplinary Conference on Modeling and Using Context, p. 109, Citeseer, 2007. 2007
459 A. Sultana, M. F. Bashir, and M. A. Qadir, “CFiTT-corrupt free fle transfer tech­nique,” in International Conference on Information and Emerging Technologies-ICIET 2007, pp. 1–6, IEEE, 2007. 2007
460 M. A. Qadir, M. Fahad, and S. A. H. Shah, “Incompleteness errors in ontology,” in IEEE International Conference on Granular Computing-GRC 2007, pp. 279–279, IEEE, 2007. 2007
461 S. Z. Ahmad and M. A. Qadir, “Terminal mobility services in the middleware environment,” in IEEE/ACS International Conference on Computer Systems and Applications-AICCSA’07, pp. 332–335, IEEE, 2007. 2007
462 M. A. Rizvi, A. I. Bhatti, and Q. R. Butt, “Misfire detection in IC engines using finite state automata,” in 15th International Conference on Soft Computing MENDEL, Brno, Czech Republic, ISSN, pp. 1803–3814, 2009. 2007
463 A. Ali, A. Nadeem, M. Z. Z. Iqbal, and M. Usman, “Regression testing based on UML design models,” in 13th Pacifc Rim International Symposium on Dependable Computing-PRDC 2007, pp. 85–88, IEEE, 2007. 2007
464 N. Raza, A. Nadeem, and M. Z. Z. Iqbal, “An automated approach to system testing based on scenarios and operations contracts,” in Seventh International Conference on Quality Software-QSIC’07, pp. 256–261, IEEE, 2007. 2007
465 M. Z. Z. Iqbal, Z. I. Malik, A. Nadeem, et al., “An approach for selective state ma­chine based regression testing,” in Proceedings of the 3rd International Workshop on Advances in Model-based Testing, pp. 44–52, ACM, 2007. 2007
466 M. Qamar, A. Nadeem, and R. Aziz, “An approach to test aspect-oriented programs,” in World Congress on Engineering, pp. 211–216, 2007. 2007
467 F. Rehman, M. M. Ahmed, N. M. Memon, and M. Riaz, “Feedback stabilization of non­holonomic systems with drift accomplished by tracking to their own extended systems; a rigid body with two torque actuators example,” in IEEE International Multitopic Conference-INMIC’06, pp. 404–409, IEEE, 2006. 2006
468 F. Rehman, M. M. Ahmed, M. N. Memon, and M. Riaz, “Signal modeling using transmultiplexer structures,” pp. 68–73, IEEE, 2006. 2006
469 F. Rehman, M. M. Ahmed, N. M. Memon, and M. Riaz, “Time-varying stabilizing control for a hopping robot model during the fight phase,” in IEEE International Multitopic Conference-INMIC’06, pp. 400–403, IEEE, 2006. 2006
470 H. A. Mirza and M. M. Ahmed, “Interference rejection capability of cross dipole an­tenna array system,” in 2006 International Conference on Advances in Space Tech­nologies, pp. 68–74, IEEE, 2006. 2006
471 M. I. Ahmad, M. M. Ahmed, and I. U. Shah, “Design and analysis of cross cage dipole antenna,” in 2006 International Conference on Advances in Space Technologies, pp. 75–80, IEEE, 2006. 2006
472 S. A. Moiz, M. M. Ahmed, K. S. Karimov, and M. Mehmood, “Temperature dependent electrical characterization of organic semiconductor diodes deposited at 277g,” in IEEE International Multitopic Conference-INMIC’06, pp. 467–471, IEEE, 2006. 2006
473 M. F. Bashir and M. A. Qadir, “Traceability techniques: A critical study,” in IEEE International Multitopic Conference-INMIC’06, pp. 265–268, IEEE, 2006. 2006
474 M. F. Bashir and M. A. Qadir, “Hisis: 4-level hierarchical semantic indexing for efficient content matching over semantic cache,” in IEEE International Multitopic Conference­INMIC’06, pp. 211–214, IEEE, 2006. 2006
475 M. F. Bashir and M. A. Qadir, “Survey on efficient semantic content matching over semantic cache,” in IEEE International Multitopic Conference-INMIC’06, pp. 215–218, IEEE, 2006. 2006
476 I. Ihsan, M.-U. D. Ahmed, M. A. Qadir, et al., “UREKA learning-object taxon­omy & repository architecture-ULTRA,” in IEEE International Multitopic Conference­INMIC’06, pp. 231–236, IEEE, 2006. 2006
477 M. O. B. Nazir and M. A. Qadir, “An efcient, scalable and fault tolerant micro-mobility management scheme using adaptive foreign agents,” in IEEE International Multitopic Conference-INMIC’06, pp. 326–330, IEEE, 2006. 2006
478 N. Iftikhar, H. Liaquat, and M. A. Qadir, “Profle based context-aware query processing architecture,” in IEEE International Multitopic Conference-INMIC’06, pp. 250–254, IEEE, 2006. 2006
479 I. Hashmi, M. A. Qadir, et al., “A hybrid UDP-TCP (RHUT) protocol for data repli­cation,” in IEEE John Vincent Atanasof 2006 International Symposium on Modern Computing-JVA’06, pp. 98–106, IEEE, 2006. 2006
480 H. Liaqaut, N. Iftikhar, and M. A. Qadir, “Context aware information retrieval us­ing role ontology and query schemas,” in IEEE International Multitopic Conference­INMIC’06, pp. 244–249, IEEE, 2006. 2006
481 A. R. Rind, K. Shahzad, and M. A. Qadir, “Evaluation and comparison of TCP and UDP over wired-cum-wireless LAN,” in IEEE International Multitopic Conference­INMIC’06, pp. 337–342, IEEE, 2006. 2006
482 I. Ihsan, M. Ahmed, M. A. Qadir, N. Iftikhar, et al., “Semantically meaningful unit-SMU; An openly reusable learning object for UREKA learning-object taxonomy & repository architecture-ULTRA,” in IEEE International Conference on Computer Sys­tems and Applications, pp. 1011–1018, IEEE, 2006. 2006
483 M. S. Akbar, S. Z. Ahmed, and M. A. Qadir, “Quantitative analytical perfor­mance of TCP variants in IP and MPLS networks,” in IEEE International Multitopic Conference-INMIC’06, pp. 331–336, IEEE, 2006. 2006
484 S. Z. Ahmad, M. S. Akbar, and M. A. Qadir, “High speed scalable mobility man­agement architecture over infrastructural WLAN,” in IEEE International Multitopic Conference-INMIC’06, pp. 343–348, IEEE, 2006. 2006
485 A. Nadeem, Z. I. Malik, and M. R. Lyu, “An automated approach to inheritance and polymorphic testing using a VDM++ specifcation,” in IEEE International Multitopic Conference-INMIC’06, pp. 224–230, IEEE, 2006. 2006
486 A. Nadeem, A. Awais, et al., “TestFilter: a statement-coverage based test case reduc­tion technique,” in IEEE International Multitopic Conference-INMIC’06, pp. 275–280, IEEE, 2006. 2006
487 I. Rauf, A. Nadeem, and M. Khokhar, “Formalizing object oriented design patterns with object-Z,” in IEEE International Multitopic Conference-INMIC’06, pp. 269–274, IEEE, 2006. 2006
488 A. Nadeem and M. R. Lyu, “A framework for inheritance testing from VDM++ spec­ifcations,” in 12th Pacifc Rim International Symposium on Dependable Computing­PRDC’06, pp. 81–88, IEEE, 2006. 2006
489 T. Waheed, M. U. Khan, and A. Nadeem, “Polymorphic extensions to object-z speci­fcations,” in TENCON 2006, pp. 1–4, IEEE, 2006. 2006
490 A. Ashraf and A. Nadeem, “Automating the generation of test cases from object-z specifcations,” in 30th Annual International Computer Software and Applications Conference-COMPSAC’06, vol. 2, pp. 101–104, IEEE, 2006. 2006
491 M. M. Khokhar, A. Nadeem, and O. M. Paracha, “An antecedence graph approach for fault tolerance in a multi-agent,” in 7th International Conference on Mobile Data Management-MDM 2006, pp. 137–137, IEEE, 2006. 2006
492 Y. Zafar and M. M. Ahmad, “Globally asynchronous locally synchronous mi­cropipelined processor implementation in FPGA,” in Proceedings of the IEEE Sym­posium on Emerging Technologies, pp. 277–282, IEEE, 2005. 2005
493 I. Ihsan, M. A. Qadir, and N. Iftikhar, “Mobile Ad-Hoc Service Grid-MASGRID,” in WEC (5), pp. 124–127, 2005. 2005
494 I. I. Mohib ur Rehman, M. U. Ahmed, N. Iftikhar, and M. A. Qadir, “Generic multime­dia database architecture,” in In Proceedings of The 3rd World Enformatika Conference (WEC’05), 2005. 2005
495 M. U. Ahmed, I. Ihsan, M. A. Qadir, N. Iftikhar, et al., “Semantic integration of learning objects for UREKA navigation & integration toolkit-UNIT,” in Proceedings of the IEEE Symposium on Emerging Technologies, pp. 525–529, IEEE, 2005. 2005
496 M. U. Ahmed, R. A. Zaheer, and M. A. Qadir, “Intelligent cache management for data grid,” in Proceedings of the 2005 Australasian workshop on Grid computing and e-research-Volume 44, pp. 5–12, Australian Computer Society, Inc., 2005. 2005
497 M. Ur Rehman, I. Ihsan, M. U. Ahmed, M. A. Qadir, and N. Iftikhar, “UREKA-grid enabled educational multimedia database,” in SEKE, pp. 485–490, 2005. 2005