Sr.No. Journal Publications  Year Impact Factor
1 A. M. Khan, M. M. Ahmed, and U. Rafique, “Experimental study of rf–plasma interaction using a low-pressure dc glow discharge tube for mpc,” Electronics, vol. 12, no. 3, p. 551, 2023. 2023 2.69
2 S. Kanwal and I. A. Taj, “CVit-Net: A conformer driven RGB-D salient object detector with operation-wise attention learning,” Expert Systems with Applications, p. 120075, 2023. 2023 8.665
3 W. A. Toor and M. Ashraf, “Performance Analysis of Learning-Based Disturbance Observer for Pulsed Superconducting Cavity Field Control,” Electronics, vol. 12, no. 7, p. 1556, 2023. 2023 2.69
4 M. W. Zaffar and I. Hassan, “Hydraulic investigation of stilling basins of the barrage before and after remodeling using FLOW-3D,” Water Supply, 2023 2023 1.768
5 N. Shaheen, R. A. Khushnood, S. A. Memon, and F. Adnan, “Feasibility assessment of newly isolated calcifying bacterial strains in self-healing concrete,” Construction and Building Materials, vol. 362, p. 129662, 2023. 2023 7.693
6 A. Sultan, N. Shaheen, and R. A. Khushnood, “Experimental evaluation of bacterial self-healing concrete embodying Bacillus pumilus cured in normal and accelerated modes,” Materials and Structures, vol. 56, no. 2, pp. 1–17, 2023. 2023 4.285
7 M. M. Khan, “Experimental study of multi streams gasoline direct injection sprays under engine-like conditions,” 2023. 2023
8 L. A. Khan and M. M. Khan, “Influence of Angular Orientation of Fins on Thermal Charging and Discharging Performance of Latent Heat Storage Unit,” High Temp, vol. 60, p. 238–251, 2023. 2023 0.518
9 S. O. B. Islam, W. A. Lughmani, W. S. Qureshi, and A. Khalid, “A connective frame- work to minimize the anxiety of collaborative Cyber-Physical System,” International Journal of Computer Integrated Manufacturing, pp. 1–19, 2023. 2023 4.42
10 U. Asad, M. Khan, A. Khalid, and W. A. Lughmani, “Human-Centric Digital Twins in Industry: A Comprehensive Review of Enabling Technologies and Implementation Strategies,” Sensors, vol. 23, no. 8, p. 3938, 2023. 2023 3.847
11 U. Asad, S. Rasheed, W. A. Lughmani, T. Kazim, A. Khalid, and J. Pannek, “Biomechanical Modeling of Human-Robot Accident Scenarios: A Computational Assessment for Heavy-Payload-Capacity Robots,” Applied Sciences, vol. 13, no. 3, p. 1957, 2023. 2023 2.838
12 S. A. Kayani, S. S. Warsi, and R. A. Liaqait, “A Smart Decision Support Frame- work for Sustainable and Resilient Supplier Selection and Order Allocation in the Pharmaceutical Industry,” Sustainability, vol. 15, no. 7, p. 5962, 2023. 2023 3.889
13 M. Ahmed, A. Ayub, N. A. Sheikh, M. W. Shahzad, M. Haroon, and M. Imran, “Thermodynamic optimization and performance study of supercritical CO2 thermo- dynamic power cycles with dry cooling using response surface method,” International Communications in Heat and Mass Transfer, vol. 142, p. 106675, 2023. 2023 6.782
14 L. Zafar, N. Masood, and S. Ayaz, “Impact of field of study (FoS) on authors’ citation trend,” Scientometrics, pp. 1–20, 2023. 2023 3.801
15 E. Irshad and A. B. Siddiqui, “Cyber threat attribution using unstructured reports in cyber threat intelligence,” Egyptian Informatics Journal, vol. 24, no. 1, pp. 43–59, 2023. 2023 4.195
16 A. Munir, S. Fazal, A. I. Bhatti, and B. Sajjad, “Pharmacokinetics- Pharmacodynamics Modeling and Evaluation of Tumor Response to Bortezomib Proteasome Inhibitor in Waldenstrom Macroglobulinemia,” American Journal of Clinical Oncology, vol. 46, no. 4, pp. 150–160, 2023. 2023 2.787
17 H. Ahsan and S. I. Malik, “NGS-Mutational Analysis of Driver Genes and TGFB1 with Tumor suppressive and Oncogenic roles in Glioblastoma: An Integrated approach with Driver DBV3,” Journal of Tianjin University Science and Technology, vol. 56, no. 4, pp. 102–125, 2023. 2023
18 A. Liaqat, A. Alfatih, S. U. Jan, L. Sun, P. Zhao, and C. Xiang, “Transcription elongation factor atspt4-2 positively modulates salt tolerance in arabidopsis thaliana,” BMC Plant Biology, vol. 23, no. 1, p. 49, 2023. 2023 5.26
19 A. Alfatih, J. Zhang, Y. Song, S. U. Jan, Z.-S. Zhang, J.-Q. Xia, Z.-Y. Zhang, T. Nazish, J. Wu, P.-X. Zhao et al., “Nitrate-responsive OsMADS27 promotes salt tolerance in rice,” Plant Communications, vol. 4, no. 2, 2023. 2023 8.625
20 M. Ullah, M. Rizwan, A. Raza, X. Zhao, Y. Sun, S. Gul, M. I. Waheed, M. N. Khan, A. Gul, S. U. Jan et al., “Genome Characterization of Probiotic Lactobacillus delbrueckii Subsp. bulgaricus Strain NDO2 Isolated from Traditional Yogurt using High Throughput Next Generation Sequencing,” Pakistan Journal of Zoology, 2023. 2023 0.687
21 A. Fatima, F. Haider, J. M. A. Qaiser, S. U. Jan, and S. M. Bakhtiar, “Insilico analysis of peptides isolated from agaricus bisporus manifests potential antimicrobial therapeutic activities,” World Journal of Biology and Biotechnology, vol. 8, no. 1, pp. 25–29, 2023. 2023
22 S. u. Jan, M. Rehman, T. Nazish, S. A. Jan, A. Liaqat, M. Moustafa, A. Gul, N. u. Huda, S. M. Bakhtiyar, S. Gul et al., “Genome-wide study and expression analysis of nodule-inception-like Protein (NLP) Gene family in Physcomitrella Patens reveals its role in Nitrogen Response,” Pak. J. Bot, vol. 55, p. 1, 2023. 2023 1.101
23 I. Khan, S. Khan, M. Akhoundian, D. Shah, S. S. Shah, and S. A. Jan, “Biogenesis of Non-coding RNAs (ncRNAs) and Their Biological Role in Rice (Oryza sativa L.),” Plant Molecular Biology Reporter, pp. 1–12, 2023. 2023 1.816
24 S. A. Jan, Z. K. Shinwari, N. Habib, S. Ali, M. S. Afridi, M. Khan et al., “Impact of Climate Change on Marine Biodiversity: Current Challenges and Future Perspectives: Marine Biodiversity, Climate Change and Complexity,” Proceedings of the Pakistan Academy of Sciences: B. Life and Environmental Sciences, vol. 60, no. 1, pp. 29–47, 2023. 2023
25 N. Habib, M. P. Narsing Rao, S. A. Jan, A. Banerjee, A. Thamchaipenet, and W.- J. Li, “Genome-based reclassification of Picrophilus torridus Zillig et al. 1996 as a later heterotypic synonym of Picrophilus oshimae Schleper et al. 1996,” International Journal of Systematic and Evolutionary Microbiology, vol. 73, no. 4, p. 005851, 2023. 2023 2.689
26 A. Fatima and S. Jan, “Approaches for sustainable production of soybean under current climate change condition,” MOJ Biol Med, vol. 8, no. 1, pp. 27–31, 2023. 2023
27 H. Ismail, D. Khalid, S. B. Ayub, M. U. Ijaz, S. Akram, M. Z. Bhatti, M. M. Taqi, E. Dilshad, S. Anwaar, G. E.-S. Batiha et al., “Effects of Phoenix dactylifera against Streptozotocin-Aluminium Chloride Induced Alzheimer’s Rats and Their In Silico Study,” BioMed Research International, vol. 2023. 2023. 2023 3.246
28 H. Ashraf, E. Dilshad, T. Afsar, A. Almajwal, H. Shafique, and S. Razak, “Molecular Screening of Bioactive Compounds of Garlic for Therapeutic Effects against COVID- 19,” Biomedicines, vol. 11, no. 2, p. 643, 2023. 2023 4.757
29 A. N. Khan and E. Dilshad, “Enhanced Antioxidant and Anticancer Potential of Artemisia carvifolia Buch Transformed with rol A Gene,” Metabolites, vol. 13, no. 3, p. 351, 2023. 2023 5.581
30 S. Hussain, S. M. Atif, M. Sagheer, and I. Jahangeer, “Analysis of magneto hydro- dynamic squeezed viscous fluid flow in a porous medium,” Journal of Central South University, vol. 30, no. 3, pp. 844–854, 2023. 2023 2.392
31 A. Aloqaily, D.-e.-S. Sagheer, I. Urooj, S. Batul, and N. Mlaiki, “Solving Integral Equations via Hybrid Interpolative -Type Contractions in -Metric Spaces,” Symmetry, vol. 15, no. 2, p. 465, 2023. 2023 2.94
32 M. S. Khan, I. Hameed, M. A. Memon, and E. Bonyah, “Computational analysis of magnetic induced micropolar flow in a rectangular channel through FreeFem++,” AIP Advances, vol. 13, no. 4, p. 045106, 2023. 2023 1.697
33 M. Akram, A. I. Hunjra, I. R. Malik, and M. A. S. Al-Faryan, “Dynamic connectedness among Pakistani stock markets and its major trading partners,” International Journal of Emerging Markets, 2023. 2023 3.422
34 F. W. Mir and N. T. Bhutta, “Impact of return and volatility spillover from banking industry to other industries: Evidence from Pakistan,” International Journal of Finance & Economics, 2023. 2023 1.6934
35 A. Batool and N. T. Bhutta, “Evaluation Of Momentum And Contrarian Strategies For Conventional And Shariah-Compliant Securities: Evidence From Pakistan Stock Exchange,” Journal of Positive School Psychology, pp. 105–129, 2023. 2023
36 A. Shafique and N. T. Bhutta, “Conceptual Framework: The impact of trade war on financial markets,” journal of Jilin University, vol. 42, no. 3, pp. 65–71, 2023. 2023
37 I. A. Janjua, M. Aksar, and S. Zafar, “Impact of compliance with International Financial reporting standards on value relevance,” Pakistan Journal of Social Research, vol. 5, no. 1, pp. 419–430, 2023. 2023
38 S. Hassan, M. A. Aksar, S. Khan, T. Ahmed, and M. Zahoor, “Impact of Audit Quality on Real Earnings Management: Moderating Role of Corporate Governance,” Reviews of Management Sciences, vol. 5, no. 1, pp. 1–12, 2023. 2023
39 B. H. Subhani, W. Wei, J. Ahmed, and U. Farooq, “Impact of Firm Reputation on Firm Financing Decision: Evidence from Non-Financial Sector of Pakistan,” Journal of Finance and Accounting Research, vol. 4, no. 2, pp. 53–74, 2023. 2023
40 N. Mubarak, A. Osmadi, J. Khan, A. Mahdiyar, and A. Riaz, “What Makes People Hide Knowledge,” Antecedents and consequences of knowledge hiding and organizations, vol. 16648714, 2023. 2023
41 N. Mubarak, J. Khan, S. Bashir, and S. Safdar, “Dark side of leadership and information technology project success: the role of mindfulness,” Journal of Managerial Psychology, 2023. 2023 4.09
42 N. Mubarak, J. Khan, and O. Pesämaa, “Lord of the Flies in Project-Based Organizations: The Role of Passive Leadership on Creativity and Project Success,” Project Management Journal, p. 87569728231157088, 2023. 2023 4.946
43 S. F. Badshah, M. U. Minhas, K. U. Khan, K. Barkat, O. Abdullah, A. Munir, M. Suhail, N. S. Malik, N. Jan, and H. Chopra, “Structural and in-vitro characterization of highly swellable β-cyclodextrin polymeric nanogels fabricated by free radical polymerization for solubility enhancement of rosuvastatin,” Particulate Science and Technology, pp. 1–15, 2023. 2023 2.628
44 M. Majid, A. Farhan, M. W. Baig, M. T. Khan, Y. Kamal, S. Bungau, I.-u. Haq et al., “Ameliorative Effect of Structurally Divergent Oleanane Triterpenoid, 3-Epifriedelinol from Ipomoea batatas against BPA-Induced Gonadotoxicity by Targeting PARP and NF-κB Signaling in Rats,” Molecules, vol. 28, no. 1, p. 290, 2023. 2023 4.927
45 A. S. Sheikh, H. Nadeem, M. T. Khan, A. Saeed, and B. Murtaza, “Antibacterial potential of novel acetamide derivatives of 2-mercaptobenzothiazole: Synthesis and docking studies,” ACS omega, 2023. 2023 4.132
46 Q. U. Memon, U. Munir, U. F. Ahmed, and M. M. Ahmed, “An efficient technique to predict DC characteristics of nano-FinFETs using a deep neural network,” Journal of Computational Electronics, pp. 1–12, 2022. 2022 1.983
47 A. M. Khan, M. M. Ahmed, U. Rafique, A. Kiyani, and S. M. Abbas, “An Efficient Slotted Waveguide Antenna System Integrated with Inside-Grooves and Modified Gaussian Slot Distribution,” Electronics, vol. 11, no. 18, p. 2948, 2022. 2022 2.69
48 M. A. Chaudhary and M. M. Ahmed, “Inline pseudoelliptic waveguide filters using asymmetric Iris coupled transverse rectangular ridge resonators,” International Journal of Microwave and Wireless Technologies, vol. 14, no. 5, pp. 537–545, 2022. 2022 1.09
49 M. A. Chaudhary and M. M. Ahmed, “Pseudoelliptic Waveguide Filters Using U- shaped Ridge Resonators,” IEEE Transactions on Circuits and Systems II: Express Briefs, 2022. 2022 3.292
50 U. Rafique, S. Khan, M. M. Ahmed, S. H. Kiani, S. M. Abbas, S. I. Saeed, M. Al- ibakhshikenari, and M. Dalarsson, “Uni-Planar MIMO Antenna for Sub-6 GHz 5G Mobile Phone Applications,” Applied Sciences, vol. 12, no. 8, p. 3746, 2022. 2022 2.679
51 M. U. Tahir, U. Rafique, and M. M. Ahmed, “Rhombus-Inscribed Circular Ring Fractal Array Antenna for Millimeter-Wave 5G Applications,” International Journal of Antennas and Propagation, vol. 2022. 2022. 2022 1.174
52 H. Khalil, U. Rafique, and M. M. Ahmed, “SIW-based dual-beam conical conformal slot array antenna for X-band applications,” Frequenz, vol. 76, no. 5-6, pp. 265–272, 2022. 2022 0.726
53 Q.-u.-d. Memon, U. F. Ahmed, and M. M. Ahmed, “A Schrödinger–Poisson model for output characteristics of trigate ballistic Si fin field effect transistors (FinFETs),” International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 35, no. 1, p. e2927, 2022. 2022 1.296
54 H. Raza, I. Ahmad, N. M. Khan, W. Abbasi, M. S. Anwar, S. Ahmad, and M. A. El-Affendi, “Validation of Parallel Distributed Adaptive Signal Processing (PDASP) Framework through Processing-Inefficient Low-Cost Platforms,” Mathematics, vol. 10, no. 23, p. 4600, 2022. 2022 2.592
55 R. F. Masood, I. A. Taj, M. B. Khan, M. A. Qureshi, and T. Hassan, “Deep Learning based Vertebral Body Segmentation with Extraction of Spinal Measurements and Disorder Disease Classification,” Biomedical Signal Processing and Control, vol. 71, p. 103230, 2022. 2022 3.88
56 Z. Latif, A. Shahzad, A. I. Bhatti, J. F. Whidborne, and R. Samar, “Autonomous Landing of an UAV Using H∞ Based Model Predictive Control,” Drones, vol. 6, no. 12, p. 416, 2022. 2022 5.532
57 R. Anjum, A. Yar, G. Murtaza, Q. Ahmed, and A. I. Bhatti, “Framework for fault- tolerant speed tracking control of gasoline engines using the first principle-based engine model,” Journal of Control and Decision, pp. 1–12, 2022. 2022
58 S. G. Bhatti and A. I. Bhatti, “Radar Signal Intrapulse Modulation Recognition using phase-based STFT and BiLSTM,” IEEE Access, vol. 10, pp. 80 184–80 194, 2022. 2022 3.476
59 H. M. Y. Naeem, A. I. Bhatti, Y. A. Butt, and Q. Ahmed, “Eco-driving control of electric vehicle with battery dynamic model and multiple traffic signals,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 236, no. 6, pp. 1133–1143, 2022. 2022 1.484
60 H. Muazzam, M. K. Ishak, A. Hanif, A. A. Uppal, A. Bhatti, and N. A. M. Isa, “Virtual Sensor Using a Super Twisting Algorithm Based Uniform Robust Exact Differentiator for Electric Vehicles,” Energies, vol. 15, no. 5, p. 1773, 2022. 2022 3.004
61 H. Muazzam, M. K. IshaK, A. Hanif, and A. I. Bhatti, “Compensating Thermal Derated Torque of IPMSM Centric Electric Vehicles,” IEEE Access, vol. 10, pp. 24 468–24 480, 2022. 2022 3.367
62 A. Hashmi, A. I. Bhatti, S. Ahmed, M. A. U. R. Tariq, and A. Savitsky, “Revisiting the Indus Basin Model for an Energy Sustainable Pakistan,” Water, vol. 14, no. 5, p. 702, 2022. 2022 3.103
63 S. Bano, M. R. Azam, A. A. Uppal, S. B. Javed, and A. I. Bhatti, “Robust p53 recovery using chattering free sliding mode control and a gain-scheduled modified Utkin observer,” Journal of theoretical biology, vol. 532, p. 110914, 2022. 2022 2.691
64 A. Mahmood, F. u. Rehman, and A. I. Bhatti, “Trajectory Optimization of a Subsonic Unpowered Gliding Vehicle Using Control Vector Parameterization,” Drones, vol. 6, no. 11, p. 360, 2022. 2022 5.432
65 M. R. Mufti, M. U. Farooq, J. Ali, N. Mehmood et al., “Synchronization and Anti synchronization of Identical 4D Hyperchaotic Financial System with External Perturbation via Sliding Mode Control Technique,” Complexity, vol. 2022. 2022. 2022 2.833
66 M. Naeem, M. Ashraf, and U. A. Khan, “A robust auto-synchronizer for synchronverter,” Computers & Electrical Engineering, vol. 98, p. 107661, 2022. 2022 3.818
67 M. H. Zafar, N. M. Khan, M. Mansoor, and U. A. Khan, “Towards green energy for sustainable development: Machine learning based MPPT approach for thermoelectric generator,” Journal of Cleaner Production, vol. 351, p. 131591, 2022. 2022 11.072
68 M. K. Khan, M. H. Zafar, M. Mansoor, A. F. Mirza, U. A. Khan, and N. M. Khan, “Green energy extraction for sustainable development: A novel MPPT technique for hybrid PV-TEG system,” Sustainable Energy Technologies and Assessments, vol. 53, p. 102388, 2022. 2022 7.632
69 M. Adnan, F. Khalid, and M. Ali, “Compressive Behavior of Interlocking Plastic Blocks Structural Elements Having Slenderness,” Buildings, vol. 12, no. 12, p. 2257, 2022. 2022 3.324
70 S. S. Khan and M. Ali, “Short-Term and Long-Term Needs for Sustainable Concrete— An Overview,” Engineering Proceedings, vol. 22, no. 1, p. 14, 2022. 2022
71 S. Ahmed and M. Ali, “Performance Evaluation of Jute-Fiber-Reinforced Concrete Walls with GFRP Reinforcement for Impact Energy Dissipation,” Engineering Proceedings, vol. 22, no. 1, p. 21, 2022. 2022
72 M. Khan, M. Cao, C. Xie, and M. Ali, “Effectiveness of hybrid steel-basalt fiber rein- forced concrete under compression,” Case Studies in Construction Materials, vol. 16, p. e00941, 2022. 2022 3.328
73 M. Khan, M. Cao, S. Chu, and M. Ali, “Properties of hybrid steel-basalt fiber rein- forced concrete exposed to different surrounding conditions,” Construction and Building Materials, vol. 322, p. 126340, 2022. 2022 6.141
74 M. Affan and M. Ali, “Experimental investigation on mechanical properties of jute fiber reinforced concrete under freeze-thaw conditions for pavement applications,” Construction and Building Materials, vol. 323, p. 126599, 2022. 2022 6.141
75 M. Khan, M. Cao, X. Chaopeng, and M. Ali, “Experimental and analytical study of hybrid fiber reinforced concrete prepared with basalt fiber under high temperature,” Fire and Materials, vol. 46, no. 1, pp. 205–226, 2022. 2022 2.407
76 A. Khan and M. Sudheer, “Machine learning-based monitoring and modeling for spatio-temporal urban growth of Islamabad,” The Egyptian Journal of Remote Sensing and Space Science, vol. 25, no. 2, pp. 541–550, 2022. 2022 5.188
77 M. U. Farooqi and M. Ali, “A study on Natural Fabre Reinforced Concrete from Materials to Structural Applications,” Arabian Journal for Science and Engineering, pp. 1–12, 2022. 2022 2.807
78 Q. Wang, A. Hussain, M. U. Farooqi, and A. F. Deifalla, “Artificial intelligence- based estimation of ultra-high-strength concrete’s flexural property,” Case Studies in Construction Materials, vol. 17, p. e01243, 2022. 2022 4.934
79 Z. Meng, L. Li, M. U. Farooqi, L. Feng, and L. Wang, “Fiber factor for fresh and hardened properties of polyethylene fiber-reinforced geopolymer mortar,” Journal of Building Engineering, vol. 53, p. 104556, 2022. 2022 7.144
80 L. Li, Y.-j. Wei, Z. Li, and M. U. Farooqi, “Rheological and viscoelastic characterizations of fly ash/slag/silica fume-based geopolymer,” Journal of Cleaner Production, vol. 354, p. 131629, 2022. 2022 11.072
81 M. Abdullah, N. Ali, M. A. Javid, and Q. Hussain, “Awareness and knowledge levels of engineering and planning students and practitioners about the 15-minute city concept in a developing country,” Journal of Urban Mobility, vol. 2, p. 100037, 2022. 2022
82 N. Ali, M. A. Javid, T. Campisi, K. Chaiyasarn, and P. Saingam, “Measuring Customers’ Satisfaction and Preferences for Ride-Hailing Services in a Developing Country,” Sustainability, vol. 14, no. 22, p. 15484, 2022. 2022 3.889
83 M. W. Malik and S. A. Rizwan, “Utilization of Acacia Modesta Gum Powder as Viscosity-Modifying Agent in Self-Compacting Paste Systems,” Engineering Proceedings, vol. 22, no. 1, p. 15, 2022. 2022
84 M. Khan, M. M. Khan, M. Irfan, N. Ahmad, M. A. Haq, I. Khan, and M. Mousa, “Energy performance enhancement of residential buildings in Pakistan by integrating phase change materials in building envelopes,” Energy Reports, vol. 8, pp. 9290–9307, 2022. 2022 4.937
85 L. Hussain and M. Khan, “Recent Progress in Flow Control and Heat Transfer Enhancement of Impinging Sweeping Jets Using Double Feedback Fluidic Oscillators: A Review,” Journal of Heat Transfer, vol. 144, no. 12, p. 120802, 2022. 2022 1.855
86 H. F. Ahmed, M. M. Khan, and F. K. Malik, “Influence of passive wake control on thermal-hydraulic performance of a cylinder confined in wavy channel under high blockage ratios,” Thermophysics and Aeromechanics, vol. 29, pp. 357–371, 2022. 2022 0.824
87 R. Sabir, M. M. Khan, M. Imran, N. A. Sheikh, and M. Irfan, “Role of transverse dimples in thermal-hydraulic performance of dimpled enhanced tubes,” International Communications in Heat and Mass Transfer, vol. 139, p. 106435, 2022. 2022 6.782
88 M. S. Shafiq and M. M. Khan, “Effects of fin length distribution functions and enclosure aspect ratio on latent thermal energy storage performance of dual-wall-heated unit,” Journal of Energy Storage, vol. 53, p. 105247, 2022. 2022 8.907
89 R. Sabir, M. M. Khan, and N. Sheikh, “Numerical investigation of thermal-hydraulic performance of u-tubes enhanced with ellipsoidal 45° dimples,” Journal of Heat Trans- fer, vol. 144, no. 8, 2022. 2022 2.021
90 F. Malik, M. Khan, H. Ahmed, M. Irfan, and I. U. Ahad, “Performance characteristics of PCM based thermal energy storage system for fluctuating waste heat sources,” Case Studies in Thermal Engineering, p. 102012, 2022. 2022 4.724
91 R. Qaiser, M. M. Khan, H. F. Ahmed, F. K. Malik, M. Irfan, and I. U. Ahad, “Performance enhancement of latent energy storage system using effective designs of tubes and shell,” Energy Reports, vol. 8, pp. 3856–3872, 2022. 2022 6.87
92 R. Sabir, M. M. Khan, N. A. Sheikh, and I. U. Ahad, “Effect of dimple pitch on thermal-hydraulic performance of tubes enhanced with ellipsoidal and teardrop dim- ples,” Case Studies in Thermal Engineering, vol. 31, p. 101835, 2022. 2022 6.87
93 S. O. B. Islam and W. A. Lughmani, “A Connective Framework for Social Collaborative Robotic System,” Machines, vol. 10, no. 11, p. 1086, 2022. 2022 2.899
94 A. Khalid, Y. Wei, M. R. Saleem, and W. A. Lughmani, “Meso scale component manufacturing: a comparative analysis of non-lithography and lithography-based processes,” Journal of Micromechanics and Microengineering, vol. 32, no. 6, p. 063002, 2022. 2022 1.881
95 L. Yue, G. Xu, J. Mumtaz, Y. Chen, and T. Zou, “Order Releasing and Scheduling for a Multi-Item MTO Industry: An Efficient Heuristic Based on Drum Buffer Rope,” Applied Sciences, vol. 12, no. 4, p. 1925, 2022. 2022 2.679
96 G. Patel, T. V. Sibalija, J. Mumtaz, Z. Li et al., “Abrasive water jet machining for a high-quality green composite: the soft computing strategy for modeling and optimization,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 44, no. 3, pp. 1–20, 2022. 2022 2.22
97 F. U. Hasnain, M. Irfan, and M. M. Khan, “Branching of fins and addition of Al2O3 nanoparticles for rapid charging and discharging of latent heat storage unit,” Inter- national Journal of energy Research, 2022. 2022 4.674
98 U. Zia, H. Aslam, and S. Qureshi, “Driving Parameters for Technology Penetration in Pakistan: A Case Study for Indoor LED Lighting,” Engineering Proceedings, vol. 23, no. 10, p. 10, 2022. 2022
99 U. Muhammad Niazi, S. Rahman, S. Legutko et al., “Experimental and Numerical Investigation of Effect of Static and Fatigue Loading on Behavior of Different Double Strap Adhesive Joint Configurations in Fiber Metal Laminates,” Materials, vol. 15, no. 5, p. 1840, 2022. 2022 3.748
100 M. Hassan, A. Mubashar, M. Masud, A. Zafar, M. Umair Ali, and Y. S. Rim, “Effect of Temperature and Al2O3 NanoFiller on the Stress Field of CFRP/Al Adhesively Bonded Single-Lap Joints,” Coatings, vol. 12, no. 12, p. 1865, 2022. 2022 3.236
101 M. Masud, M. D. Ali, M. Irfan, S. Rasheed, and M. Haroon, “Numerical Investigation of Impact and Compression after Impact Performance of 45° Biaxial Composite Laminates,” Engineering Proceedings, vol. 23, no. 1, p. 18, 2022. 2022
102 M. Haroon, S. Rasheed, M. Irfan, M. Masud, and M. A. Munawar, “Computational Investigation of the Flow Structure through an Over-Expanded Nozzle,” Engineering Proceedings, vol. 23, no. 1, p. 7, 2022. 2022
103 Y. Zulfiqar, M. J. Hyder, A. Jehanzeb, H. W. Ahmad, A. Zulfiqar, U. Ma- sood Chaudry, and T.-S. Jun, “Numerical Investigation of an Optimum Ring Baffle Design to Optimize the Structural Strength of a Tank Subjected to Resonant Seismic Sloshing,” Structural Engineering International, pp. 1–11, 2022. 2022 1.182
104 N. N. Malik, M. J. Hyder, and A. Shah, “Experiemental Investigation ON Techniques to Improve the accuracy of MPU 6050 for TILT Measurement,” Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, vol. 54, no. 9, pp. 158–174, 2022. 2022
105 M. J. Hyder, A. Nauman, and S. Musheer, “Monthly Average Solar Radiation and Angstrom-Prescott Model for Islamabad, Pakistan,” Engineering Proceedings, vol. 23, no. 1, p. 26, 2022. 2022
106 A. Muhammad and M. A. Qadir, “MF-Storm: a maximum flow-based job scheduler for stream processing engines on computational clusters to increase throughput,” PeerJ Computer Science, vol. 8, p. e1077, 2022. 2022 2.411
107 R. Mumtaz and M. A. Qadir, “CustRE: a rule-based system for family relations extraction from English text,” Knowledge and Information Systems, vol. 64, no. 7, pp. 1817–1844, 2022. 2022 2.531
108 R. Mumtaz, M. A. Qadir, and A. Saeed, “CustFRE: An annotated dataset for extraction of family relations from English text,” Data in brief, vol. 41, p. 107980, 2022. 2022
109 H. Waqas and A. Qadir, “Completing features for author name disambiguation (AND): an empirical analysis,” Scientometrics, vol. 127, no. 2, pp. 1039–1063, 2022. 2022 3.238
110 F. Jafari, A. Nadeem et al., “Evaluation of Metamorphic Testing for Edge Detection in MRI Brain Diagnostics,” Applied Sciences, vol. 12, no. 17, p. 8684, 2022. 2022 2.838
111 N. F. Malik, A. Nadeem, and M. A. Sindhu, “Achieving state space reduction in generated ajax web application state machine,” Intelligent Automation and Soft Computing, vol. 33, no. 1, pp. 429–455, 2022. 2022 1.647
112 M. Rizwan, A. Nadeem, S. Sarwar, M. Iqbal, M. Safyan, and Z. U. Qayyum, “Ekmex- an extended framework for labeling an unlabeled fault dataset,” Multimedia Tools and Applications, vol. 81, no. 9, pp. 12 141–12 156, 2022. 2022 2.757
113 T. Ashfaq, M. I. Khalid, G. Ali, M. E. Affendi, J. Iqbal, S. Hussain, S. S. Ullah, A. S. Yahaya, R. Khalid, and A. Mateen, “An Efficient and Secure Energy Trading Approach with Machine Learning Technique and Consortium Blockchain”, 2022. 2022
114 S. W. Khan, Q. Hafeez, M. I. Khalid, R. Alroobaea, S. Hussain, J. Iqbal, J. Almotiri, and S. S. Ullah, “Anomaly detection in traffic surveillance videos using deep learning,” Sensors, vol. 22, no. 17, p. 6563, 2022. 2022 3.847
115 I. Ehsan, A. Mumtaz, M. I. Khalid, J. Iqbal, S. Hussain, S. Sajid Ullah, and F. Umar, “Internet of Things-Based Fire Alarm Navigation System: A Fire-Rescue Department Perspective,” Mobile Information Systems, 2022. 2022 1.863
116 M. S. Khan, R. Irfan, J. Iqbal, S. Hussain, S. Sajid Ullah, R. Alroobaea, F. Umar et al., “Optimizing Deep Learning Model for Software Cost Estimation Using Hybrid Meta- Heuristic Algorithmic Approach,” Computational Intelligence and Neuroscience, vol. 2022. 2022. 2022 3.12
117 S. Bharany, S. Sharma, J. Frnda, M. Shuaib, M. I. Khalid, S. Hussain, J. Iqbal, and S. S. Ullah, “Wildfire Monitoring Based on Energy Efficient Clustering Approach for FANETS,” Drones, vol. 6, no. 8, p. 193, 2022. 2022 5.532
118 M. Shuaib, S. Badotra, M. I. Khalid, A. D. Algarni, S. S. Ullah, S. Bourouis, J. Iqbal, S. Bharany, and L. Gundaboina, “A Novel Optimization for GPU Mining Using Overclocking and Undervolting,” Sustainability, vol. 14, no. 14, p. 8708, 2022. 2022 3.889
119 S. S. Ullah, S. Hussain, M. Uddin, R. Alroobaea, J. Iqbal, A. M. Baqasah, M. Abdel- haq, and R. Alsaqour, “A Computationally Efficient Online/Offline Signature Scheme for Underwater Wireless Sensor Networks,” Sensors, vol. 22, no. 14, p. 5150, 2022. 2022 3.847
120 J. Iqbal, H. Bibi, N. U. Amin, H. AlSalman, S. Sajid Ullah, and S. Hussain, “Efficient and Secure Key Management and Authentication Scheme for WBSNs Using CP-ABE and Consortium Blockchain,” Journal of Sensors, vol. 2022. p. 2419992, 2022. 2022 2.336
121 M. Irfan Khalid, J. Iqbal, S. Hussain, N. Yaqub, and A. Naseem, “Implementation of Interference-Aware Susceptible Channel Assignment for Cognitive Radio Network,” 2022. 2022
122 M. Ayaz, J. Iqbal, M. Adnan, S. S. Hussain, A. Alabrah, N. U. Amin, S. Al-Hadhrami, M. Rahman, and S. Md, “A Content Dissemination Technique Based on Priority to Improve Quality of Service of Vehicular Ad Hoc Networks,” Journal of Advanced Transportation, vol. 2022. 2022. 2022 2.419
123 I. Ehsan, M. Irfan Khalid, L. Ricci, J. Iqbal, A. Alabrah, S. Sajid Ullah, and T. M. Alfakih, “A Conceptual Model for Blockchain-Based Agriculture Food Supply Chain System,” Scientific Programming, vol. 2022. 2022. 2022 1.025
124 M. I. Khalid, J. Iqbal, A. Alturki, S. Hussain, A. Alabrah, and S. S. Ullah, “Blockchain-Based Land Registration System: A Conceptual Framework,” Applied Bionics and Biomechanics, vol. 2022. 2022. 2022 1.781
125 S. Hussain, S. S. Ullah, M. Uddin, J. Iqbal, and C.-L. Chen, “A Comprehensive Survey on Signcryption Security Mechanisms in Wireless Body Area Networks,” Sensors, vol. 22, no. 3, p. 1072, 2022. 2022 3.847
126 J. Iqbal, M. Adnan, Y. Khan, H. AlSalman, S. Hussain, S. S. Ullah, N. U. Amin, and A. Gumaei, “Designing a Healthcare-Enabled Software-Defined Wireless Body Area Network Architecture for Secure Medical Data and Efficient Diagnosis,” Journal of Healthcare Engineering, vol. 2022. p. 9210761, 2022. 2022 2.682
127 C. A. U. Hassan, J. Iqbal, M. S. Khan, S. Hussain, A. Akhunzada, M. Ali, A. Gani, M. Uddin, and S. S. Ullah, “Design and Implementation of Real-Time Kitchen Moni- toring and Automation System Based on Internet of Things,” Energies, vol. 15, no. 18, p. 6778, 2022. 2022 3.252
128 N. Alturki, and S. S. Ullah, “Effectively Predicting the Presence of Coronary Heart Disease Using Machine Learning Classifiers,” Sensors, vol. 22, no. 19, p. 7227, 2022. 2022 3.847
129 C. A. U. Hassan, M. Hammad, M. Uddin, J. Iqbal, J. Sahi, S. Hussain, and S. S. Ullah, “Optimizing the Performance of Data Warehouse by Query Cache Mechanism,” IEEE Access, vol. 10, pp. 13 472–13 480, 2022. 2022 3.367
130 C. A. u. Hassan, J. Iqbal, N. Ayub, S. Hussain, R. Alroobaea, and S. S. Ullah, “Smart Grid Energy Optimization and Scheduling Appliances Priority for Residential Buildings through Meta-Heuristic Hybrid Approaches,” Energies, vol. 15, no. 5, p. 1752, 2022. 2022 3.004
131 C. Anwar ul Hassan, M. Hammad, J. Iqbal, S. Hussain, S. S. Ullah, H. AlSalman, M. A. Mosleh, and M. Arif, “A Liquid Democracy Enabled Blockchain-Based Electronic Voting System,” Scientific Programming, vol. 2022. 2022. 2022 1.025
132 A. Nawaz and M. Malik, “Rising stars prediction in reviewer network,” Electronic Commerce Research, vol. 22, no. 1, pp. 53–75, 2022. 2022 3.747
133 N. Ahmed, A. b. Ngadi, J. M. Sharif, S. Hussain, M. Uddin, M. S. Rathore, J. Iqbal, M. Abdelhaq, R. Alsaqour, S. S. Ullah et al., “Network Threat Detection Using Ma- chine/Deep Learning in SDN-Based Platforms: A Comprehensive Analysis of State-of- the-Art Solutions, Discussion, Challenges, and Future Research Direction,” Sensors, vol. 22, no. 20, p. 7896, 2022. 2022 3.847
134 M. S. Rathore, N. Ahmad, R. Kohli, J. Iqbal, R. Alroobaea, S. Hussain, S. S. Ul- lah, and F. Umar, “In the direction of service guarantees for virtualized network functions,” Wireless Communications and Mobile Computing, vol. 2022. 2022. 2022 2.336
135 A. B. Dogar, R. Fatima, A. Yasin, M. Shafiq, J. A. Khan, M. Assam, A. Mohamed, E.- A. Attia et al., “Stochastic Recognition of Human Physical Activities via Augmented Feature Descriptors and Random Forest Model, 2022” 2022
136 S. Fida, N. Masood, N. Tariq, and F. Qayyum, “A Novel Hybrid Ensemble Cluster- ing Technique for Student Performance Prediction,” Journal of Universal Computer Science, vol. 28, no. 8, pp. 777–798, 2022. 2022 1.056
137 S. Irfan, N. Anjum, T. Althobaiti, A. A. Alotaibi, A. B. Siddiqui, and N. Ramzan, “Heartbeat Classification and Arrhythmia Detection Using a Multi-Model Deep- Learning Technique,” Sensors, vol. 22, no. 15, p. 5606, 2022. 2022 3.847
138 A. Jabbar, Q. H. Abbasi, N. Anjum, T. Kalsoom, N. Ramzan, S. Ahmed, P. M. Rafi- ul Shan, O. P. Falade, M. A. Imran, and M. Ur Rehman, “Millimeter-Wave Smart Antenna Solutions for URLLC in Industry 4.0 and Beyond,” Sensors, vol. 22, no. 7, p. 2688, 2022. 2022 3.847
139 M. A. Jamshed, C. Theodorou, T. Kalsoom, N. Anjum, Q. H. Abbasi, and M. Ur- Rehman, “Intelligent computing-based forecasting of deforestation using fire alerts: A deep learning approach,” Physical Communication, vol. 55, p. 101941, 2022. 2022 2.379
140 Z. Mehmood, H. N. Chaudhry, R. A. Naqvi, F. Kulsoom, A. Munshi, and M. Bilal, “Passive Framework of Sparse Region Duplication Detection from Digital Images,” Journal of Sensors, vol. 2022. 2022. 2022 2.336
141 D. Hamid, S. Sajid Ullah, J. Iqbal, S. Hussain, C. Hassan, A. Ul, and F. Umar, “A Machine Learning in Binary and Multiclassification Results on Imbalanced Heart Disease Data Stream,” Journal of Sensors, 2022. 2022 2.336
142 S. Haider, A. Mahmood, S. Khatoon, M. Alshamari, and M. T. Afzal, “Automatic Classification of Eyewitness Messages for Disaster Events Using Linguistic Rules and ML/AI Approaches,” Applied Sciences, vol. 12, no. 19, p. 9953, 2022. 2022 2.838
143 F. S. Ujager, A. Mahmood, M. Usman, and M. S. Rathore, “A Hierarchical Energy Conservation Framework (HECF) of Wireless Sensor Networks by Temporal Association Rule Mining for Smart Buildings,” Egyptian Informatics Journal, vol. 23, no. 1, pp. 137–147, 2022. 2022 4.195
144 S. Inam, A. Mahmood, S. Khatoon, M. Alshamari, and N. Nawaz, “Multisource data integration and comparative analysis of machine learning models for on-street parking prediction,” Sustainability, vol. 14, no. 12, p. 7317, 2022. 2022 3.889
145 A. Sajid, M. S. Saeed, R. M. Malik, S. Fazal, S. Malik, and M. A. Kamal, “Prediction of Secondary and Tertiary Structure and Docking of Rb1WT And Rb1R661W Proteins,” Current Biotechnology, vol. 11, no. 1, pp. 71–85, 2022. 2022
146 S. Hussain and S. I. Malik, “Proliferative Effects of Lung Cancer Cells Derived Exosomes on T Cells,” Brazilian Archives of Biology and Technology, vol. 65, 2022. 2022 1.18
147 S. Hussain and S. Malik, “Effects of tumor derived exosomes on T cells markers expression,” Brazilian Journal of Biology, vol. 84, 2022. 2022 1.651
148 A. Iqbal, “Structural Diversity and Forest Tree Species Composition of Sheringal Valley Dir Kohistan Pakistan,” Fresenius Environmental Bulletin, vol. 31, no. 10, pp. 10 128–10 135, 2022. 2022 0.618
149 S. A. Jan, R. Tabassum, and H. Bashir, “Speed breeding methods for soybean improvement: recent advances,” J Nutr Health Food Eng, vol. 12, no. 2, pp. 41–42, 2022. 2022
150 M. Khan, S. H. Shah, M. Abdullah, M. Salman, F. Hayat, R. Sarwar, N. Hassan, S. A. Jan, M. Saddam, Z. Rahman et al., “Current Epidemiological Status and Antibiotic Resistance Profile of Urinary Tract Infection,” Journal of Bioresource Management, vol. 9, no. 1, p. 12, 2022. 2022
151 S. A. Jan, Z. K. Shinwari, M. Faizan, and S. Ijaz, “Anticancer properties of soybean: an updated review,” J Cancer Prev Curr Res, vol. 13, no. 1, pp. 22–23, 2022. 2022
152 S. Jan, Z. Shinwari, I. Khan, S. Khan, A. Iqbal, and H. Khurshid, “CRISPR-CAS9 Mediated Genome Editing In Plants against Viruses: An Updated Review,” Pak. J. Bot, vol. 54, no. 4, pp. 1575–1578, 2022. 2022 0.972
153 I. Riasat, N. I. Soomro, A. Noor, J. Iqbal, and S. M. Bakhtiar, “Ace Gene and its Associations with Inflammation or Inflammatory Disorders,” International Journal of Biology and Biotechnology, vol. 19, no. 4, pp. 413–422, 2022. 2022
154 S. Imtiaz, N. I. Soomro, I. Riasat, S. Hafeez, J. Iqbal, and S. M. Bakhtiar, “Association of BDNF Gene (rs6265/G196A) Polymorphism with Depression,” NUST Journal of Natural Sciences, vol. 6, no. 2, 2022. 2022
155 E. Dilshad, M. Idrees, B. Sajid, A. Munir, and S. Fazal, “Non-Toxic Flavonoids of Artemisia annua can be used as Anti-Cancer Compounds: A Computational Analysis,” Life and Science, vol. 3, no. 4, pp. 12–12, 2022. 2022
156 E. Dilshad, M. Maaz, N. M. Ashraf et al., “Identification of Anti-inflammatory Metabolites from Trigonella foenum greacum using Computational Approaches,” Cur- rent Trends in OMICS, vol. 2, no. 1, pp. 55–88, 2022. 2022
157 S. Safi, Y. Badshah, M. Shabbir, K. Zahra, K. Khan, E. Dilshad, T. Afsar, A. Al- majwal, N. W. Alruwaili, D. Al-Disi et al., “Predicting 3d structure, cross talks, and prognostic significance of klf9 in cervical cancer,” Frontiers in Oncology, vol. 11, pp. 797 007–797 007, 2022. 2022 6.244
158 E. Dilshad, F. Mehmood, R. Tariq, A. Munir, and S. Fazal, “Chemical constituents of artemisia annua are potent inhibitors of alpha-amylase in type ii diabetes,” Life and Science, vol. 3, no. 1, pp. 10–10, 2022. 2022
159 I. U. Khan, M. Saqib, A. Amin, F. Hussain, L. Li, Y.-H. Liu, B.-Z. Fang, I. Ahmed, and W.-J. Li, “Noviherbaspirillum aridicola sp. nov., isolated from an arid soil in pakistan,” International Journal of Systematic and Evolutionary Microbiology, vol. 72, no. 2, p. 005232, 2022. 2022 2.747
160 S. Riaz, I. Ejaz, R.-u.-R. , B. Aftab, M. Zahid, and Z. Andleeb, “The Effect of Bougainvillea spectabilis Leaf Extract on Polycystic Ovary Syndrome (PCOS) in Rat Model,” Journal of Food and Nutrition Research, vol. 10, no. 11, pp. 762–771, 2022. 2022 1.138
161 S. Riaz, M. Zahid, R. Rehman, B. Aftab, M. Imran, and S. Ijlal Shahrukh, “Effect of Phytoestrogens in the Treatment of Polycystic Ovary Syndrome in Rat Model,” Journal of Food and Nutrition Research, vol. 10, no. 7, pp. 518–525, 2022. 2022 1.138
162 M. Ullah, M. Rizwan, A. Raza, X. Zhao, Y. Sun, S. Gul, M. I. Waheed, M. N. Khan, A. Gul, S. U. Jan et al., “Comparative Genomic and Functional Characterization of Lactobacillus casei Group (LCG) Probiotic Strains Isolated from Traditional Yogurts by Next-Generation Sequencing,” Pakistan Journal of Zoloogy, pp. 1–10, 2022. 2022 0.687
163 A. Alfatih, J. Zhang, Y. Song, S. U. Jan, Z.-S. Zhang, J.-Q. Xia, Z.-Y. Zhang, T. Nazish, J. Wu, P.-X. Zhao et al., “Nitrate-responsive OsMADS27 promotes salt tolerance in rice,” Plant Communications, p. 100458, 2022. 2022 8.625
164 M. U. R. Kayani, K. Yu, Y. Qiu, X. Yu, L. Chen, and L. Huang, “Longitudinal analysis of exposure to a low concentration of oxytetracycline on the zebrafish gut microbiome.” Frontiers in microbiology, vol. 13, pp. 985 065–985 065, 2022. 2022 6.064
165 L. Huang, “Genome-Resolved Characterization of Structure and Potential Functions of the Zebrafish Stool Microbiome,” Frontiers in Cellular and Infection Microbiology, vol. 12, p. 910766, 2022. 2022 6.073
166 M. Sagheer, S. Atif, S. Hussain, and H. Rehman, “Squeezed MHD tangent hyperbolic fluid flow across a sensor surface,” Heat Transfer, vol. 51, no. 6, pp. 5101–5113, 2022. 2022
167 S. Hussain, M. Jamal, Z. Haddad, and M. Arici, “Numerical modeling of magnetohy- drodynamic thermosolutal free convection of power law fluids in a staggered porous enclosure,” Sustainable Energy Technologies and Assessments, vol. 53, p. 102395, 2022. 2022 7.632
168 S. Hussain, M. Molana, T. Armaghani, A. Rashad, and H. A. Nabwey, “Energy storage performance and irreversibility analysis of a water-based suspension containing nano- encapsulated phase change materials in a porous staggered cavity,” Journal of Energy Storage, vol. 53, p. 104975, 2022. 2022 8.907
169 S. Hussain, M. Zeeshan et al., “Irreversibility analysis for the natural convection of Casson fluid in an inclined porous cavity under the effects of magnetic field and viscous dissipation,” International Journal of Thermal Sciences, vol. 179, p. 107699, 2022. 2022 4.779
170 L. Kolsi, S. Hussain, K. Ghachem, M. Jamal, and C. Maatki, “Double Diffusive Natural Convection in a Square Cavity Filled with a Porous Media and a Power Law Fluid Separated by a Wavy Interface,” Mathematics, vol. 10, no. 7, p. 1060, 2022. 2022 2.258
171 S. Hussain, M. Pour, M. Jamal, and T. Armaghani, “MHD Mixed Convection and Entropy Analysis of Non-Newtonian Hybrid Nanofluid in a Novel Wavy Elbow-Shaped Cavity with a Quarter Circle Hot Block and a Rotating Cylinder,” Experimental Techniques, pp. 1–20, 2022. 2022 1.167
172 S. Hussain, A. M. Aly, and H. F. Öztop, “Magneto-bioconvection flow of hybrid nanofluid in the presence of oxytactic bacteria in a lid-driven cavity with a streamlined obstacle,” International Communications in Heat and Mass Transfer, vol. 134, p. 106029, 2022. 2022 5.683
173 S. Hussain and B. P. Geridonmez, “Mixed bioconvection flow of Ag-MgO/water in the presence of oxytactic bacteria and inclined periodic magnetic field,” International Communications in Heat and Mass Transfer, vol. 134, p. 106015, 2022. 2022 5.683
174 S. Hussain, T. Tayebi, T. Armaghani, A. Rashad, and H. Nabwey, “Conjugate natural convection of non-Newtonian hybrid nanofluid in wavy-shaped enclosure,” Applied Mathematics and Mechanics, vol. 43, no. 3, pp. 447–466, 2022. 2022 2.866
175 S. Hussain, N. Alsedias, and A. M. Aly, “Natural convection of a water-based suspension containing nano-encapsulated phase change material in a porous grooved cavity,” Journal of Energy Storage, vol. 51, p. 104589, 2022. 2022 6.583
176 M. Afzal and H. Bilal, “Silencing performance analysis of a membrane cavity with different edge conditions,” Journal of Vibration and Control, p. 10775463221118707, 2022. 2022 2.633
177 H. Bilal and M. Afzal, “Reflection and transmission of acoustic waves through the bridging membrane junctions,” Waves in Random and Complex Media, pp. 1–24, 2022. 2022 4.853
178 M. Afzal, J. U. Satti, A. Wahab, and R. Nawaz, “Scattering analysis of a partitioned membrane-bounded cavity with material contrast,” The Journal of the Acoustical Society of America, vol. 151, no. 1, pp. 31–44, 2022. 2022 1.84
179 S. Kanwal, S. Inam, R. Ali, and O. Cheikhrouhou, “Lightweight Noncommutative Key Exchange Protocol for IoT Environments,” Frontiers in Environmental Science, p. 1775, 2022. 2022 5.411
180 T. S. Ali and R. Ali, “A novel color image encryption scheme based on a new dynamic compound chaotic map and S-box,” Multimedia Tools and Applications, pp. 1–15, 2022. 2022 2.757
181 M. Zia and R. Ali, “Cryptanalysis of an Encryption Scheme that Uses Elliptic Curve Over Finite Field,” Kuwait Journal of Science, vol. 49, no. 1, pp. 1–11, 2022. 2022 0.948
182 S. Batul, F. Mehmood, A. Hussain, R. George, and M. Sohail, “Some results for multivalued mappings in extended fuzzy b-metric spaces,” AIMS Mathematics, vol. 8, no. 3, pp. 5338–5351, 2022. 2022 2.739
183 S. Batul, D.-S. Sagheer, M. Anwar, H. Aydi, and V. Parvane, “Fuzzy Fixed-Point Results of Fuzzy Mappings on b-Metric Spaces via (a, F)-Contractions,” Advances in Mathematical Physics, vol. 2022. pp. 1–8, 2022. 2022 1.364
184 S. Batul, F. Mehmood, D.-S. Sagheer, M. S. Ashraf, H. Aydi, and Y. Gaba, “On Geraghty Contractive Mappings and an Application,” Journal of Mathematics, vol. 2022., 2022. 2022 1.55
185 S. Batul, H. A. Dur-e Shehwar Sagheer, A. Mukheimer, and S. S. Aiadi, “Best proximity point results for Prevsic type non self-operators in b-metric spaces,” AIMS Mathematics, vol. 7, no. 6, pp. 10 711–10 730, 2022. 2022 1.427
186 S. Batul, F. Mehmood, A. Hussain, D.-e.-S. Sagheer, H. Aydi, and A. Mukheimer, “Multivalued contraction maps on fuzzy b-metric spaces and an application,” AIMS Mathematics, vol. 7, no. 4, pp. 5925–5942, 2022. 2022 1.427
187 E. Azhar, A. Kamran, and S. Atif, “Exploring the dynamics of natural convective Prandtl fluid flow subjected to induced magnetic field,” Waves in Random and Com- plex Media, pp. 1–17, 2022. 2022 4.051
188 A. Kamran and E. Azhar, “Numerical outlook of a viscoelastic nanofluid in an inclined channel via Keller box method,” International Communications in Heat and Mass Transfer, vol. 137, p. 106260, 2022. 2022 6.782
189 A. Kamran, E. Azhar, N. Akmal, Z. Mehmood, and Z. Iqbal, “Finite Difference Approach for Critical Value Analysis to Describe Jeffery–Hamel Flow Toward an Inclined Channel with Microrotations,” Arabian Journal for Science and Engineering, pp. 1–8, 2022. 2022 2.807
190 M. Siddique and A. Kashif, “The restricted six-body problem with stable equilibrium points and a rhomboidal configuration,” Advances in Astronomy, vol. 2022. 2022. 2022 1.093
191 R. Ejaz, S. Ashraf, A. Hassan, and A. Gupta, “An empirical investigation of mar- ket risk, dependence structure, and portfolio management between green bonds and international financial markets,” Journal of Cleaner Production, vol. 365, p. 132666, 2022. 2022 11.072
192 I. Yousaf, S. Alireza Athari, D. Kirikkaleli, A. Hassan, and S. Ali, “The Role OF Family Control In Determining the Capital Strcuture: Evidence From Non-financial Listed Firms,” Ekonomski pregled, vol. 73, no. 3, pp. 459–481, 2022. 2022
193 M. Sheraz, D. Xu, A. ullah, J. Ahmed, and Q. Jiang, “Nexus between Energy consumption, Financial Market Development, and Urbanization: evidence from Emerging Economy,” The Singapore Economic Review, pp. 1–20, 2022. 2022 1.736
194 M. Aksar and J. Ahmed, “Does Managerial Behaviour Matter? Evidence from Emerging Economies,” Global Business Review, p. 09721509221109054, 2022. 2022
195 U. Farooq, J. Ahmed, W. Akhter, and M. I. Tabash, “Environmental regulations and trade credit activities of corporate sector: A new panel data evidence,” Journal of Cleaner Production, p. 132307, 2022. 2022 11.072
196 J. Ahmed, U. Farooq, and B. H. Subhani, “The moderating role of information and communication technology in the nexus between financial development, economic growth and energy consumption,” OPEC Energy Review, 2022. 2022
197 U. Farooq, J. Ahmed, and M. Shahbaz, “How various energy sources affect industrial investment? empirical evidence from asian economies,” Energy, vol. 248, p. 123536, 2022. 2022 7.147
198 K. K. Kurramovich, A. A. Abro, A. I. Vaseer, S. U. Khan, S. R. Ali, and M. Murshed, “Roadmap for carbon neutrality: the mediating role of clean energy development- related investments,” Environmental Science and Pollution Research, vol. 29, no. 23, pp. 34 055–34 074, 2022. 2022 4.223
199 Z. Ahmed, M. Ahmad, M. Murshed, A. I. Vaseer, and D. Kirikkaleli, “The trade- off between energy consumption, economic growth, militarization, and co2 emissions: does the treadmill of destruction exist in the modern world?” Environmental Science and Pollution Research, vol. 29, no. 12, pp. 18 063–18 076, 2022. 2022 4.223
200 S. Kihombo, A. I. Vaseer, Z. Ahmed, S. Chen, D. Kirikkaleli, and T. S. Adebayo, “Is there a tradeoff between financial globalization, economic growth, and environmental sustainability? An advanced panel analysis,” Environmental Science and Pollution Research, vol. 29, p. 3983–3993, 2022. 2022 4.223
201 S. Faiz, N. Mubarak, S. Safdar, and J. Khan, “A “Curates Egg” Perception of Politics: Why and When Organizational Politics Leads to Good and Bad Outcomes,” Performance Improvement Quarterly, vol. 34, no. 4, pp. 627–648, 2022. 2022
202 F. Ahmed, I. Ali, S. Kousar, and S. Ahmed, “The environmental impact of industrialization and foreign direct investment: empirical evidence from Asia-Pacific region,” Environmental Science and Pollution Research, vol. 29, no. 20, pp. 29 778–29 792, 2022. 2022 4.223
203 G. Mustafa, N. Mubarak, J. Khan, M. Nauman, and A. Riaz, “Impact of Leader- Member Exchange on Innovative Work Behavior of Information Technology Project Employees; Role of Employee Engagement and Self-Efficacy,” Employee Responsibilities and Rights Journal, pp. 1–19, 2022. 2022
204 J. Khan, M. Jaafar, N. Mubarak, and A. K. Khan, “Employee mindfulness, innovative work behaviour, and IT project success: the role of inclusive leadership,” Information Technology and Management, pp. 1–15, 2022. 2022
205 N. Mubarak, A. Osmadi, J. Khan, A. Mahdiyar, and A. Riaz, “What makes people hide knowledge? influence of passive leadership and creative self-efficacy,” Frontiers in psychology, vol. 12, 2022. 2022 4.232
206 N. Mubarak, J. Khan, and A. Osmadi, “How does leader’s knowledge hiding kill innovative work behavior,” International Journal of Managing Projects in Business, no. ahead-of-print, 2022. 2022 2.951
207 N. Mubarak, J. Khan, and A. K. Khan, “Psychological distress and project success: The moderating role of employees’ resilience and mindfulness,” International Journal of Project Management, 2022. 2022 7.172
208 J. Khan, N. Mubarak, S. A. Khattak, S. Safdar, and M. Jaafar, “Despotic leadership and IT project efficiency: the role of resilience,” International Journal of Managing Projects in Business, 2022. 2022 2.634
209 I. Yousaf and S. Haqqani, “HIV Treatment Adherence Self-efficacy Scale for Pakistani HIV/AIDS patients: Translation and psychometric evaluation,” Applied Nursing Re- search, vol. 66, p. 151606, 2022. 2022 1.847
210 S. Zaigham, U. Arshad, and S. Seemab, “Phonological Adaptation of English Loan- words by Urdu Speakers,” Pakistan Languages and Humanities Review, vol. 6, no. 4, pp. 115–128, 2022. 2022
211 M. F. Alam, M. Uzair, and U. Arshad, “Unfolding Graphic Representation in Sci- ence Textbooks at Intermediate Level: A Narratological Appraisal,” Pakistan Social Sciences Review, vol. 6, no. 2, pp. 918–928, 2022. 2022
212 A. Khalid, S. Haqqani, and C. Williams, “Guided self-help Urdu version of the living life to the full intervention for secondary school adolescents with low mood and anxiety in Pakistan: A feasibility study,” Heliyon, vol. 8, no. 7, p. e09809, 2022. 2022 3.776
213 M. Zada, S. Zada, M. Ali, Z. Y. Jun, N. Contreras-Barraza, and D. Castillo, “How classy servant leader at workplace? Linking servant leadership and task performance during the COVID-19 crisis: a moderation and mediation approach,” Frontiers in Psychology, vol. 13, 2022. 2022 4.232
214 H. B. Khalid and M. I. Khan, “The Role Of Self-Expressive Brands And Brand Tribalism In Advocating Apparel Brands,” Journal of Positive School Psychology, vol. 6, no. 11, pp. 1148–1158, 2022. 2022
215 M. I. K. Gulfam Murtaza, “LMX Ambivalence and Innovative Work Behavior: A Moderated Mediation Mechanism of Individual Mindfulness and Negative Effect,” Journal of Southwest Jiaotong University, vol. 57, no. 5, 2022. 2022
216 M. I. K. Haris Bin Khalid, “Psychographic motives and self-concept resonate: A study of loyalty and Advocacy of Fashion in the Millennial Consumers,” Journal of Southwest Jiaotong University, vol. 57, no. 5, 2022. 2022
217 F. W. Mir and N. T. Bhutta, “Impact of return and volatility spillover from banking industry to other industries: Evidence from Pakistan,” International Journal of Finance & Economics, 2022. 2022 1.634
218 R. Yousaf and N. Bhutta, “Impact of Electioneering on Currency and Stock Market; Evidence from South Asian Countries,” Studies of Applied Economics, vol. 40, no. 2, 2022. 2022
219 G. K. Qureshi and N. T. Bhutta, “Bivariate Hedging Between Crypto-Currency and Traditional Assets,” Journal of Positive School Psychology, vol. 6, no. 11, pp. 545–568, 2022. 2022
220 T. Ahmed, Q. A. Malik, B. Z. Butt, and M. Aksar, “Role of Corporate Governance to Restrict Tunneling Activities of Foreign Institutional Investors in the Pakistan Stock Market,” The International Trade Journal, pp. 1–12, 2022. 2022
221 U.-e. Rubbab, S. M. M. R. Naqvi, M. Irshad, and R. Zakariya, “Impact of supervisory delegation on employee voice behavior: role of felt obligation for constructive change and voice climate,” European Journal of Training and Development, 2022. 2022
222 R. Zakariya and S. Muhammad Mehdi Raza Naqvi, “Leader instigated task conflict and its effects on employee job crafting; the mediating role of employee attributions,” PLOS ONE, vol. 17, no. 12, pp. 1–14, 2022. 2022 3.752
223 S. Alzarea, M. Abbas, P. J. Ronan, K. Lutfy, and S. Rahman, “The Effect of an α-7 Nicotinic Allosteric Modulator PNU120596 and NMDA Receptor Antagonist Memantine on Depressive-like Behavior Induced by LPS in Mice: The Involvement of Brain Microglia,” Brain Sciences, vol. 12, no. 11, p. 1493, 2022. 2022 3.333
224 H. Hussain, L. Rashan, U. Hassan, M. Abbas, F. L. Hakkim, and I. R. Green, “Frank- incense diterpenes as a bio-source for drug discovery,” Expert Opinion on Drug Discovery, vol. 17, no. 5, pp. 513–529, 2022. 2022 6.098
225 M. Aslam, K. Barkat, N. S. Malik, M. S. Alqahtani, I. Anjum, I. Khalid, U. R. Tulain, N. Gohar, H. Zafar, A. C. Paiva-Santos et al., “pH Sensitive Pluronic Acid/Agarose- Hydrogels as Controlled Drug Delivery Carriers: Design, Characterization and Toxicity Evaluation,” Pharmaceutics, vol. 14, no. 6, p. 1218, 2022. 2022 6.525
226 S. I. Shah, F. Nasir, N. S. Malik, M. Alamzeb, M. Abbas, I. U. Rehman, F. Khuda, Y. Shah, K. W. Goh, A. Zeb et al., “Efficacy Evaluation of 10-Hydroxy Chondrofoline and Tafenoquine against Leishmania tropica (HTD7),” Pharmaceuticals, vol. 15, no. 8, p. 1005, 2022. 2022 5.215
227 F. Akhtar, U. R. Tulain, A. Erum, M. Ahmad, A. Rashid, N. S. Malik, and H. Ijaz, “Impact of various monomers on release of losartan potassium from guar gum based polymeric network,” Pakistan Journal of Pharmaceutical Sciences, vol. 35, no. 5, 2022. 2022 0.863
228 A. Erum, U. R. Tulain, A. Maqsood, N. S. Malik, A. Rashid, L. Z. Warraich et al., “Fabrication and comparative appraisal of natural and synthetic polymeric pH responsive nanoparticles for effective delivery of dexlansoprazole,” Polymer Bulletin, pp. 1–17, 2022. 2022 2.843
229 A. Baloch, M. Ahmad, M. U. Minhas, S. F. Badshah, K. Barkat, M. Suhail, and N. S. Malik, “Fabrication of swellable PEGylated hydrogel by free radical polymerization for controlled delivery of non-steroidal anti-inflammatory drug; characterization and statistical analysis,” Particulate Science and Technology, pp. 1–14, 2022. 2022 2.628
230 W. Ahmad, I. Khalid, K. Barkat, M. U. Minhas, I. U. Khan, H. K. Syed, N. S. Mali, A. Jamshed, A. Ikram, and M. Badshah, “Development and evaluation of polymeric nanogels to enhance solubility of letrozole,” Polymer Bulletin, pp. 1–32, 2022. 2022 2.483
231 N. Shahid, A. Erum, M. Zaman, U. R. Tulain, Q.-u.-a. Shoaib, N. S. Malik, R. Kausar, A. Rashid, and U. Rehman, “Synthesis and evaluation of chitosan based controlled re- lease nanoparticles for the delivery of ticagrelor,” Designed Monomers and Polymers, vol. 25, no. 1, pp. 55–63, 2022. 2022 2.65
232 M. U. Minhas, S. Ahmad, K. U. Khan, M. Sohail, O. Abdullah, I. Khalid, and N. S. Malik, “Synthesis And Evaluation of Polyethylene Glycol-4000-Co-Poly (AMPS) Based Hydrogel Membranes for Controlled Release of Mupirocin for Efficient Wound Healing,” Current drug delivery, 2022. 2022 2.565
233 A. Mahmood, A. Erum, S. Mumtaz, U. R. Tulain, N. S. Malik, and M. S. Alqahtani, “Preliminary Investigation of Linum usitatissimum Mucilage-Based Hydrogel as Possible Substitute to Synthetic Polymer-Based Hydrogels for Sustained Release Oral Drug Delivery,” Gels, vol. 8, no. 3, p. 170, 2022. 2022 4.702
234 U. Laraib, U. R. Tulain, A. Erum, M. A. Hussain, N. S. Malik, A. Rashid, S. Kausar, and H. Ijaz, “Development and evaluation of Artemisia vulgaris mucilage-based polymeric network for controlled drug delivery,” Pakistan Journal of Pharmaceutical Sciences, vol. 35, no. 2, 2022. 2022 0.684
235 D. Badshah, S. Faisal, D. Khan, K. Ullah, D. Malik, N. Shafmshad, D. Suhail, D. Jan et al., “Structural and In-Vitro Characterization of Highly Swellable B-Cyclodextrin Polymeric Nanogels Fabricated by Free Radical Polymerization for Solubility Enhancement of Rosuvastatin,” JDDST-D-22-01017, 2022. 2022 3.981
236 A. M. Zubair, M. N. H. Malik, W. Younis, M. A. H. Malik, S. Jahan, I. Ahmed, A. Yuchi, M. N. Mushtaq, R. Tahir, M. B. Sarwar et al., “Novel acetamide derivatives of 2-aminobenzimidazole prevent inflammatory arthritis in rats via suppression of pro- inflammatory mediators,” Inflammopharmacology, pp. 1–15, 2022. 2022 5.093
237 A. Bukhari, H. Nadeem, S. Sarwar, I. Abbasi, M. T. Khan, I. Hamid, and U. Bukhari, “Exploring Therapeutic Potential of 1, 3, 4-Oxadiazole Nucleus as Anticancer Agents: A Mini-Review.” Medicinal Chemistry (Shariqah (United Arab Emirates)), 2022. 2022 2.329
238 M. Muddassir, A. Batool, M. Alam, G. Abbas Miana, R. Altaf, S. Alghamdi, M. Almehmadi, O. Abdulaziz, A. Amer Alsaiari, M. Umar Khayam Sahibzada, A. Khusro, and M. Tariq Khan, “Evaluation of in vitro, in silico antidiabetic and antioxidant potential of bioactivity based isolated “Pakistanine” from Berberis baluchistanica,” Arabian Journal of Chemistry, vol. 15, no. 11, p. 104221, 2022. 2022 6.212
239 A. Batool, G. A. Miana, M. Alam, M. T. Khan, M. Muddassir, W. Zaman, S. Khan, A. Aman, A. Khusro, M. V. Arasu et al., “Bioassay-guided fractionation and isolation of Arctigenin from Saussurea heteromalla for in vitro and in silico cytotoxic activity against HeLa cells,” Physiological and Molecular Plant Pathology, vol. 117, p. 101749, 2022. 2022 2.747
240 I. Ajmal, M. A. Farooq, S. Q. Abbas, J. Shah, M. Majid, and W. Jiang, “Isoprenaline and salbutamol inhibit pyroptosis and promote mitochondrial biogenesis in arthritic chondrocytes by downregulating β-arrestin and GRK2.” Frontiers in pharmacology, vol. 13, pp. 996 321–996 321, 2022. 2022 5.988
241 M. W. Baig, M. Majid, B. Nasir, S. S. ul Hassan, S. Bungau, and I.-u. Haq, “Toxicity evaluation induced by single and 28-days repeated exposure of withametelin and daturaolone in Sprague Dawley rats,” Frontiers in Pharmacology, vol. 13, p. 3690, 2022. 2022 5.988
242 I. Bano, P. Horky, S. Q. Abbas, M. Majid, A. H. M. Bilal, F. Ali, T. Behl, S. S. u. Hassan, and S. Bungau, “Ferroptosis: A New Road towards Cancer Management,” Molecules, vol. 27, no. 7, p. 2129, 2022. 2022 4.927
243 M. Majid, A. Farhan, M. I. Asad, M. R. Khan, S. S. u. Hassan, I.-u. Haq, and S. Bungau, “An Extensive Pharmacological Evaluation of New Anti-Cancer Triter- penoid (Nummularic Acid) from Ipomoea batatas through In Vitro, In Silico, and In Vivo Studies,” Molecules, vol. 27, no. 8, p. 2474, 2022. 2022 4.927
244 I. Naz, M. R. Khan, J. A. Zai, R. Batool, S. Maryam, and M. Majid, “Indigofera linifolia ameliorated ccl4 induced endoplasmic reticulum stress in liver of rat,” Journal of Ethnopharmacology, vol. 285, p. 114826, 2022. 2022 4.36
245 I. Hamid, H. Nadeem, S. F. Ansari, S. Khiljee, I. Abbasi, A. Bukhari, M. Arif, and M. Imran, “2-Substituted Benzoxazoles as Potent Anti-Inflammatory Agents: Synthe- sis, Molecular Docking and In Vivo Anti-Ulcerogenic Studies,” Medicinal Chemistry (Shariqah (United Arab Emirates)), vol. 18, no. 7, pp. 791–809, 2022. 2022 2.329
246 Y. Hussain, K. F. Alsharif, M. Aschner, A. Theyab, F. Khan, L. Saso, and H. Khan, “Therapeutic Role of Carotenoids in Blood Cancer: Mechanistic Insights and Therapeutic Potential,” Nutrients, vol. 14, no. 9, p. 1949, 2022. 2022 6.706
247 L. Saso, “How Curcumin Targets Inflammatory Mediators in Diabetes: Therapeutic Insights and Possible Solutions,” Molecules, vol. 27, no. 13, p. 4058, 2022. 2022 4.927
248 A. W. Khan, Z. ul Abidin, M. U. K. Sahibzada, M. Faheem, N. G. Qazi, M. Alam, I. Ullah, J. Uddin, A. Khan, and A. Al-Harrasi, “Potential biomedical applications of Araucaria araucana as an antispasmodic, bronchodilator, vasodilator, and antiemetic: Involvement of calcium channels,” Journal of Ethnopharmacology, vol. 298, p. 115651, 2022. 2022 5.195
249 I. Ahmad, M. F. A. Khan, A. Rahdar, S. Hussain, F. K. Tareen, M. W. Salim, N. Ajalli, M. I. Amirzada, and A. Khan, “Design and Evaluation of pH Sensitive PEG- Protamine Nanocomplex of Doxorubicin for Treatment of Breast Cancer,” Polymers, vol. 14, no. 12, p. 2403, 2022. 2022 4.967
250 M. Saood, R. Yasmin et al., “Factors and Predictors of Health-Related Quality of Life of the General Population of Pakistan,” Frontiers in Public Health, vol. 10, 2022. 2022 6.461
251 S. Iqbal and M. I. Khan, “Spirituality as a predictor of psychological well-being: An explanatory mechanism of religiosity and sustainable consumption,” Religions, vol. 11, no. 12, p. 634, 2020. 2020
252 U. F. Gillani, M. I. Khan, M. W. Ishaq, K. Aziz, and M. N. Akram, “The factors of why the people of Pakistan do not purchase paid apps,” International Journal of Online Marketing (IJOM), vol. 10, no. 2, pp. 44-56, 2020. 2020
253 S. Safdar, M. H. Saghir, S. Faiz, M. R. Yasmin, M. N. Mubarak et al., “Trust in leaders and job satisfaction of health care workers: Linking organizational justice to citizenship behavior,” The Journal of Social Sciences Research, vol. 6, no. 8, pp. 737-744, 2020. 2020
254 S. Safdar and S. Liu, “The influence of justice on commitment of Pakistani bankers: job satisfaction as mediator,” International Journal of Public Administration, vol. 43, no. 14, pp. 1183-1193, 2020. 2020
255 A. Aslam, S. Fatima, M. M. Hassan, J. A. Qureshi, and S. Dilawar, “Job Crafting Incidents: Antecedents of Job Crafting and its Impact on Individual’s Task and Contextual Performance: Application of Job Demand Resource Theory,” Pacific Business Review International, vol. 13, no. 3, 2020. 2020
256 H. Ali, S. Hassan, M. S. Malik, and M. M. Hassan, “Impact of Cognitive factors on Financial behavior with mediating role of Financial Anxiety,” Epistemology, vol. 7, no. 3, pp. 82-99, 2020. 2020
257 M. Majeed, M. Irshad, T. Fatima, J. Khan, and M. M. Hassan, “Relationship Between Problematic Social Media Usage and Employee Depression: A Moderated Mediation Model of Mindfulness and Fear of COVID-19,” Frontiers in Psychology, vol. 11, p. 557987, 2020. 2020
258 U. Ullah, H. Badshah, Z. Malik, Z. Uddin, M. Alam, S. Sarwar, A. Aman, A.-u. Khan, and F. A. Shah, “Hepatoprotective effects of melatonin and celecoxib against ethanol- induced hepatotoxicity in rats,” Immunopharmacology and Immunotoxicology, pp. 1-9, 2020. 2.086 2020
259 A. Khan, Z. Iqbal, S. Nazir, M. Alam, and A. Naz, “Evaluation of emesis control with orally disintegrating tablets and conventional tablets of domperidone: a random­ized trial,” Latin American Journal of Pharmacy, vol. 39, no. 1, pp. 29-37, 2020. 0.29 2020
260 M. T. Khan, H. Nadeem, A.-u. Khan, M. Abbas, M. Arif, N. S. Malik, Z. Malik, and I. Javed, “Amino acid conjugates of 2-mercaptobenzimidazole provide better anti-inflammatory pharmacology and improved toxicity profile,” Drug Development Re­search, vol. 81, no. 8, pp. 1057-1072, 2020. 1.902 2020
261 A. Mohsin Alvi, L. Tariq Al Kury, M. Umar Ijaz, F. Ali Shah, M. Tariq Khan, A. Sadiq Sheikh, H. Nadeem, A.-u. Khan, A. Zeb, and S. Li, “Post-treatment of synthetic polyphenolic 1, 3, 4 oxadiazole compound a3, attenuated ischemic stroke- induced neuroinflammation and neurodegeneration,” Biomolecules, vol. 10, no. 6, p. 816, 2020. 4.694 2020
262 S. Iqbal, F. A. Shah, K. Naeem, H. Nadeem, S. Sarwar, Z. Ashraf, M. Imran, T. Khan, T. Anwar, and S. Li, “Succinamide derivatives ameliorate neuroinflammation and ox­idative stress in scopolamine-induced neurodegeneration,” Biomolecules, vol. 10, no. 3, p. 443, 2020. 4.694 2020
263 Q. Khalid, M. Ahmad, M. U. Minhas, F. Batool, N. S. Malik, and M. Rehman, “Novel ,0-cyclodextrin nanosponges by chain growth condensation for solubility enhancement of dexibuprofen: characterization and acute oral toxicity studies,” Journal of Drug Delivery Science and Technology, p. 102089, 2020. 2.734 2020
264 Y. Mehmood, U. Farooq, H. Yousaf, H. Riaz, R. K. Mahmood, A. Nawaz, Z. Abid, M. Gondal, N. S. Malik, K. Barkat et al., “Antiviral activity of green silver nanopar­ticles produced using aqueous buds extract of syzygium aromaticum,” Pak. J. Pharm. Sci, vol. 33, no. 2, pp. 839-845, 2020. 0.596 2020
265 N. S. Malik, M. Ahmad, M. U. Minhas, R. Tulain, I. Khalid, K. Barkat, and A. Rashid, “Toxicological evaluation of xanthan gum-based hydrogel formulation in wistar rats using single dose study,” Acta Poloniae Pharmaceutica, vol. 77, no. 2, pp. 353-360, 2020. 0.447 2020
266 N. S. Malik, M. Ahmad, M. U. Minhas, R. Tulain, K. Barkat, I. Khalid, and Q. Khalid, “Chitosan/xanthan gum-based hydrogels as potential carrier for an antiviral drug: Fabrication, characterization, and safety evaluation,” Frontiers in Chemistry, vol. 8, p. 50, 2020. 3.782 2020
267 N. A. Salam, M. A. Naeem, N. S. Malik, M. Riaz, F. Aslam et al., “Exploring the potential of tianeptine matrix tablets: Synthesis, physicochemical characterization and acute toxicity studies.” Pakistan Journal of Pharmaceutical Sciences, vol. 33, no. 1 (Supplementary), pp. 269-279, 2020. 0.596 2020
268 N. U. Rehman, M. Abbas, M. Al-Rashida, A. Tokhi, M. A. Arshid, M. S. Khan, I. Ahmad, and K. Rauf, “Effect of 4-fluoro-n-(4-sulfamoylbenzyl) benzene sulfonamide on acquisition and expression of nicotine-induced behavioral sensitization and striatal adenosine levels,” Drug Design, Development and Therapy, vol. 14, p. 3777, 2020. 3.216 2020
269 N. U. Rehman, M. Al-Rashida, A. Tokhi, Z. Ahmed, F. Subhan, M. Abbas, M. A. Arshid, and K. Rauf, “Analgesic and antiallodynic effects of 4-fluoro-n-(4- sulfamoylbenzyl) benzene sulfonamide in a murine model of pain,” Drug Design, De­velopment and Therapy, vol. 14, p. 4511, 2020. 3.216 2020
270 N. U. Rehman, K. Esmaeilpour, S. Joushi, M. Abbas, M. al Rashida, K. Rauf, and Y. Masoumi-Ardakani, “Effect of 4-fluoro-n-(4-sulfamoylbenzyl) benzene sulfonamide on cognitive deficits and hippocampal plasticity during nicotine withdrawal in rats,” Biomedicine & Pharmacotherapy, vol. 131, p. 110783, 2020. 4.545 2020
271 S. Akhtar, M. Abbas, K. Naeem, M. Faheem, H. Nadeem, and A. Mehmood, “Benzimi­dazole derivative ameliorates opioid-mediated tolerance during anticancer-induced neu­ropathic pain in mice,” Anti-cancer agents in medicinal chemistry, 2020. 2.049 2020
272 M. Sona Khan, W. Trenet, N. Xing, B. Sibley, M. Abbas, M. al Rashida, K. Rauf, and C. D. Mandyam, “A novel sulfonamide, 4-fs, reduces ethanol drinking and physical withdrawal associated with ethanol dependence,” International Journal of Molecular Sciences, vol. 21, no. 12, p. 4411, 2020. 4.183 2020
273 M. Imran, L. T. Al Kury, H. Nadeem, F. A. Shah, M. Abbas, S. Naz, A.-u. Khan, and S. Li, “Benzimidazole containing acetamide derivatives attenuate neuroinflamma­tion and oxidative stress in ethanol-induced neurodegeneration,” Biomolecules, vol. 10, no. 1, p. 108, 2020. 4.694 2020
274 S. Bashir and A. Safdar, “Coriander seeds: Ethno-medicinal, phytochemical and phar­macological profile,” Science of Spices and Culinary Herbs-Latest Laboratory, Pre- clinical, and Clinical Studies, vol. 2, pp. 39-64, 2020. 2020
275 S. Bashir, A.-u. Khan, M. Mahmood, M. Abbas, S. Akhtar, A. W. Khan, M. T. Aqeel, M. Akhlaq, and H. Ahmad, “Students’ perception of the learning environment in private-sector pharmacy institutes of Pakistan,” Pharmacy Education, vol. 20, pp. 191-197, 2020. 2020
276 A. H. Palla, A.-u.-H. Gilani, S. Bashir, and N. Ur Rehman, “Multiple mechanisms of flaxseed: Effectiveness in inflammatory bowel disease,” Evidence-Based Complemen­tary and Alternative Medicine, vol. 2020, pp. 1-16, 2020. 1.813 2020
277 F. Khurshid, S. Bashir, and B. Noushad, “Prescription writing through the lens of the threshold concept framework: a narrative review,” Res Dev, vol. 9, no. 11, p. 11, 2020. 2020
278 M. W. Baig, B. Nasir, D. Waseem, M. Majid, M. Z. I. Khan, and I.-u. Haq, “Withametelin: a biologically active with anolide in cancer, inflammation, pain and depression,” Saudi Pharmaceutical Journal, vol. 28, no. 12, pp. 1526-1537, 2020. 2.879 2020
279 B. Nasir, M. W. Baig, M. Majid, S. M. Ali, M. Z. I. Khan, S. T. B. Kazmi, and I.-u. Haq, “Preclinical anticancer studies on the ethyl acetate leaf extracts of datura stramonium and datura inoxia,” BMC Complementary Medicine and Therapies, vol. 20, no. 1, pp. 1-23, 2020. 2020
280 S. U. Rehman, U. F. Ahmed, M. M. Ahmed, and U. Rafique, “An improved space charge distribution analytical model to assess field-effect transistor’s intrinsic capaci­tors,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 6, pp. 4502-4517, 2019. 0.625 2019
281 U. F. Ahmed, M. M. Ahmed, and Q. D. Memon, “A non-linear compact model for FINFETs output characteristics,” IET Circuits, Devices & Systems, vol. 13, no. 8, pp. 1249-1254, 2019. 1.277 2019
282 M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “An improved temperature dependent analytical model to predict AlGaN/GaN high electron mobility transistors ac characteristics,” International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 32, no. 6, p. e2648, 2019. 0.795 2019
283 M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “Simulation and com­parative analysis of the DC characteristics of submicron GaN HEMTs for use in CAD software,” Journal of Computational Electronics, vol. 18, no. 2, pp. 482-491, 2019. 1.637 2019
284 U. F. Ahmed and M. M. Ahmed, “An analytical model to assess dc characteristics of independent gate Si FinFETs,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 4, pp. 2456-2465, 2019. 0.625 2019
285 Z. Ahmed and M. M. Ahmed, “Sidelobe reduction and gain enhancement in higher order TM30 and tm70 mode rectangular patch antennas via partial notch loading,” IET Microwaves, Antennas & Propagation, vol. 13, no. 12, pp. 1955-1962, 2019. 2.036 2019
286 U. Ahmed and M. Ahmed, “A 3-d potential model to assess dc characteristics of Si FinFETs,” Journal of Computational Electronics, vol. 18, no. 3, pp. 893-905, 2019. 1.637 2019
287 Z. Ahmed, M. M. Ahmed, M. B. Ihsan, A. A. Chaudhary, and J. K. Arif, “Novel dual band patch antenna with gap coupled composite right/left-handed transmission line,” International Journal of Microwave and Wireless Technologies, vol. 11, no. 1, pp. 87-93, 2019. 0.745 2019
288 S. Fatima, U. Rafique, U. F. Ahmed, and M. M. Ahmed, “A global parameters extrac­tion technique to model organic field effect transistors output characteristics,” Solid- State Electronics, vol. 152, pp. 81-92, 2019. 1.66 2019
289 S. U. Rehman, U. F. Ahmed, M. M. Ahmed, and M. N. Khan, “Temperature dependent analytical DC Model for Wide Bandgap MESFETs,” IEEE Access, vol. 7, pp. 49 702­49 711, 2019. 3.557 2019
290 H. Khalil, M. M. Ahmed, and U. Rafique, “Nose-cone conformal substrate-integrated waveguide slot array antenna for x-band radar applications,” International Journal of Antennas and Propagation, vol. 2019, 2019. 1.347 2019
291 I. Ullah and M. Ashraf, “Comparison of synchronization techniques under distorted grid conditions,” IEEE Access, vol. 7, pp. 101345-101354, 2019. 4.09 2019
292 I. Ullah and M. Ashraf, “A novel filter extracted equivalent control based fixed fre­quency sliding mode approach for power electronic converters conditions,” Energies, vol. 12, no. 5, pp. 853-866, 2019. 2.707 2019
293 R. Irfan, H. ur Rasheed, W. A. Toor, and M. Ashraf, “Performance analysis of adaptive algorithms for space-time adaptive processor (STAP) in phased array radar,” The Journal of Engineering, vol. 2019, no. 19, pp. 6313-6317, 2019. 2019
294 I. Ullah and M. Ashraf, “Sliding mode control for performance improvement of shunt active power filter,” SN Applied Sciences, vol. 1, no. 6, p. 531, 2019. 2019
295 A. R. Yasin, M. Ashraf, and A. I. Bhatti, “A novel Filter Extracted Equivalent Con­trol based Fixed Frequency Sliding Mode Approach for power electronic converters,” Energies, vol. 12, no. 5, p. 853, 2019. 2.676 2019
296 A. R. Yasin, M. Ashraf, A. I. Bhatti, and A. A. Uppal, “Fixed frequency sliding mode control of renewable energy resources in DC micro grid,” Asian Journal of Control, vol. 21, no. 4, pp. 2074-2086, 2019. 1.528 2019
297 S. B. Javed, A. A. Uppal, A. I. Bhatti, and R. Samar, “Prediction and parametric analysis of cavity growth for the underground coal gasification project thar,” Energy, vol. 172, pp. 1277-1290, 2019. 5.537 2019
298 G. Murtaza, A. I. Bhatti, and Y. A. Butt, “Unified FDI and FTC scheme for air path actuators of a diesel engine using ISM extended with adaptive part,” Asian Journal of Control, vol. 22, no. 1, pp. 117-129, 2019. 2.005 2019
299 R. Anjum, A. I. Bhatti, A. Yar, and Q. Ahmed, “Cyclic torque imbalance detection in gasoline engines using a uniform second-order sliding mode observer,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 233, no. 13, pp. 3515-3527, 2019. 1.414. 2019
300 M. Tahir, I. A. Taj, P. A. Assuncao, and M. Asif, “Fast video encoding based on random forests,” Journal of Real-Time Image Processing, pp. 1-21, 2019. 1.574 2019
301 H. Raza and N. M. Khan, “Tracking performance of robust RLS algorithm for MIMO channel estimation,” Wireless Personal Communications, pp. 1-15, 2019. 0.929 2019
302 K. Shehzad, N. M. Khan, and J. Ahmed, “Impact of frequency reuse and flexible cell association on the performance of dense heterogeneous cellular networks using dual slope path loss model,” IEEE Access, vol. 7, pp. 166 214-166 234, 2019. 4.098 2019
303 M. Muzzammil, T. Ahmad, N. M. Khan, and L. Wan, “Low cost, faster detection of cognitive radio through filter banks with bandpass sampling,” Physical Communica­tion, vol. 33, pp. 1-8, 2019. 1.451 2019
304 S. M. Gulfam, S. Junaid Nawaz, A. Baltzis, A. Ahmed, and N. M. Khan, “Charac­terization of angular spread and fading statistics of mmWave range (28 GHz and 38 GHz) outdoor and indoor radio propagation channels”,” Technologies (MDPI), vol. 7, pp. 1-9, 2019. 2019
305 M. Ghafoor, S. A. Tariq, T. Zia, I. A. Taj, A. Abbas, A. Hassan, and A. Y. Zomaya, “Fingerprint identification with shallow multifeatured view classifier,” IEEE Transac­tions on Cybernetics, 2019. 10.387 2019
306 M. Tahir, I. A. Taj, P. A. Assuncao, and M. Asif, “Low complexity high efficiency coding of light fields using ensemble classifiers,” Journal of Visual Communication and Image Representation, vol. 66, p. 102742, 2019. 2.259 2019
307 N. I. Ratyal, I. A. Taj, M. Sajid, N. Ali, A. Mahmood, and S. Razzaq, “Three-dimensional face recognition using variance-based registration and subject-specific descriptors,” International Journal of Advanced Robotic Systems, vol. 16, no. 3, p. 1729881419851716, 2019. 1.223 2019
308 N. Ratyal, I. A. Taj, M. Sajid, A. Mahmood, S. Razzaq, S. H. Dar, N. Ali, M. Usman, M. J. A. Baig, and U. Mussadiq, “Deeply learned pose invariant image analysis with applications in 3d face recognition,” Mathematical Problems in Engineering, vol. 2019, 2019. 1.179 2019
309 T. Zia, M. Ghafoor, S. A. Tariq, and I. A. Taj, “Robust fingerprint classification with bayesian convolutional networks,” IET Image Processing, vol. 13, no. 8, pp. 1280-1288, 2019. 2.004 2019
310 M. F. Iqbal, M. Zahid, D. Habib, and L. K. John, “Efficient prediction of network traffic for real-time applications,” Journal of Computer Networks and Communications, vol. 2019, 2019. 2019
311 Z. Masood, R. Samar, and M. A. Z. Raja, “Design of a mathematical model for the stuxnet virus in a network of critical control infrastructure,” Computers & Security, vol. 87, p. 101565, 2019. 3.476 2019
312 Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of epidemic computer virus model with effect of quarantine in the presence of immunity,” Fundamenta Informaticae, vol. 161, no. 3, pp. 249-273, 2019. 0.725 2019
313 S. M. Shah, R. Samar, and M. A. Z. Raja, “Fractional-order algorithms for tracking Rayleigh fading channels,” Nonlinear Dynamics, vol. 92, no. 3, pp. 12 493-1259, 2019. 4.604 2019
314 M. R. Mufti, H. Afzal, F. Ur-Rehman, W. Aslam, and M. I. Qureshi, “Transmission projective synchronization of multiple non-identical coupled chaotic systems using slid­ing mode control,” IEEE Access, vol. 7, pp. 17847-17 861, 2019. 4.098 2019
315 S. Ud Din, F. Ur Rehman, and Q. Khan, “Smooth super-twisting sliding mode control for the class of underactuated systems,” PloS one, vol. 13, no. 10, p. e0203667, 2018. 2.776 2019
316 F. Ur Rahman, Q. Khan, and R. Akmeliawati, “Synchronization and anti-synchronization protocol design of chaotic nonlinear gyros: an adaptive integral sliding mode approach,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 27, no. 1, pp. 675-684, 2019. 0.625 2019
317 W. Abbasi, F. Ur Rehman, I. Shah, and A. Rauf, “Stabilizing control algorithm for non- holonomic wheeled mobile robots using adaptive integral sliding mode,” International Journal of Robotics and Automation, vol. 34, no. 2, 2019. 0.754 2019
318 M. S. Iqbal, “Real-time fault detection system for large scale grid-integrated solar photovoltaic power plants,” Ph.D. dissertation, Department of Electrical Engineering, Capital University of Science and …, 2019. 2019
319 T. Irshad, “Comparative analysis of conventional VSC and MMC on the basis of output power quality and control performance,” Ph.D. dissertation, Department of Electrical Engineering, Capital University of Science and ., 2019. 2019
320 K. A. Khaliq, O. Chughtai, A. Shahwani, A. Qayyum, and J. Pannek, “An emergency response system: Construction, validation, and experiments for disaster management in a vehicular environment,” Sensors vol. 19, no. 5, p. 1150, 2019. 3.275 2019
321 K. A. Khaliq, O. Chughtai, A. Shahwani, A. Qayyum, and J. Pannek, “Road accidents detection, data collection and data analysis using v2x communication and edge/cloud computing,” Electronics, vol. 8, no. 8, p. 896, 2019. 2.412 2019
322 I. Hassan and I. Waqar, “Reducing water demands by adopting harvesting and recycling techniques in Pakistan,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 14, no. 4, pp. 79-88, 2019. 2019
323 S. S. S. Gardezi and N. Shafiq, “Operational carbon footprint prediction model for conventional tropical housing: a Malaysian prospective,” International Journal of En­vironmental Science and Technology, vol. 16, no. 12, pp. 7817-7826, 2019. 2.037 2019
324 A. Gopinath, M. S. Kumar, and A. Elayaperumal, “Experimental investigations on mechanical properties of jute fiber reinforced composites with polyester and epoxy resin matrices,” Procedia Engineering, vol. 97, pp. 2052-2063, 2019. 0.97 2019
325 M. Zahid and M. Ali, “Efficiency of jute fibers in stabilized-earth-brick masonry work,” 2019. 2019
326 A. Wahab and M. Ali, “Effect of loading rates on behavior of concrete girders having GFRP rebars and jute fibers,” 2019. 2019
327 S. M. H. Sabri, “Behavior of jute fiber reinforced concrete having glass fiber reinforced polymer rebars for possible application in bridge pier,” Ph.D. dissertation, Capital University, 2019. 2019
328 F. Khan and M. Ali, “Dynamic response of interlocking plastic-block structure,” 2019. 2019
329 F. Qamar, T. Thomas, and M. Ali, “Improvement in lateral resistance of mortar- free interlocking wall with plaster having natural fibres,” Construction and Building Materials, vol. 234, p. 117387, 2019, 4.046 2019
330 U. Khan, D. Shams, F. Khalid, and M. Ali, “IUse of local bagasse-ash and recycled- concrete-aggregates as partial replacement of sand and coarse- aggregates in concrete for non-structural applications,” 2019. 2019
331 N. Ajaz, A. Rashid, and M. Ali, “Effect of column uplift on dynamic response of 3D structure,” 2019. 2019
332 F. Qamar, T. Thomas, and M. Ali, “Assessment of mechanical properties of fibrous mortar and interlocking soil stabilized block (ISSB) for low-cost masonry housing,” Materiales de Construccion, vol. 69, no. 336, p. 201, 2019. 1.886 2019
333 F. Qamar, T. Thomas, and M. Ali, “Assessment of mechanical properties of fibrous mortar and interlocking soil stabilized block (ISSB) for low-cost masonry housing,” Materials de Construction, vol. 69, 2019. 2019
334 M. Khan and M. Ali, “Improvement in concrete behavior with fly ash, silica-fume and coconut fibres,” Construction and Building Materials, vol. 203, pp. 174-187, 2019. 4.046 2019
335 T. Hussain and M. Ali, “Improving the impact resistance and dynamic properties of jute fiber reinforced concrete for rebars design by considering tension zone of FRC,” Construction and Building Materials, vol. 213, pp. 592-607, 2019. 4.046 2019
336 M. U. Farooqi and M. Ali, “Effect of pre-treatment and content of wheat straw on energy absorption capability of concrete,” Construction and Building Materials, vol. 224, pp. 572-583, 2019. 4.046 2019
337 G. A. Anwar, F. Dinu, and M. Ahmed, “Numerical study on ultimate deformation and resistance capacity of bolted T-Stub connection,” International Journal of Steel Structures, vol. 19, no. 3, pp. 970-977, 2019. 0.873 2019
338 T. Ahmed, K. Arooj, H. S. Ranja, F. M. U, and M. Ali, “Prospects of NFRC for pavements in developing countries,” 2019. 2019
339 K. M. Mehdi, U. Tahir, Q. Salar, S. Gul, and M. Ali, “Influence of bio-based admixture on the behavior of concrete,” 2019. 2019
340 L. Hussain and M. M. Khan, “Passive control of vortex shedding and drag reduction in laminar flow across circular cylinder using wavy wall channel,” 2019. 2019
341 L. A. Khan, M. M. Khan, A. Jan, and S. A. kazmi, “Acceleration of charging process of a horizontal latent thermal energy storage unit with longitudinal fins,” 2019. 2019
342 R. Sabir, M. M. Khan, and N. Sheikh, “Assessment of thermo-hydraulic performance of inward dimpled tubes with variation in angular orientations,” Applied Thermal En­gineering, vol. 170, p. 115040, 2019. 4.026 2019
343 S. O. B. Islam, W. A. Lughmani, W. S. Qureshi, A. Khalid, M. A. Mariscal, and S. Garcia-Herrero, “Exploiting visual cues for safe and flexible cyber-physical production systems,” Advances in Mechanical Engineering, vol. 11, no. 12, p. 1687814019897228, 2019. 1.024 2019
344 M. Khan, A. Khalid, W. A. Lughmani, and M. M. Khan, “Wave power potential estimation in the exclusive economic zone: A case study,” 2019. 2019
345 S. Rasheed, W. A. Lughmani, A. Khalid, and M. M. Khan, “Modelling of human robot accident interaction to assess impact and damage in a smart factory context,” 2019. 2019
346 I. S O, L. A. Khan, A. Khalid, and W. A. Lughmani, “Book chapter” A smart micro factory design: An integrated approach,” Computers & Industrial Engineering, vol. 129, pp. 220-227, 2019. 3.518 2019
347 S. S. Warsi, M. H. Agha, R. Ahmad, S. H. I. Jaffery, and M. Khan, “Sustainable turning using multi-objective optimization: a study of al 6061 t6 at high cutting speeds,” The International Journal of Advanced Manufacturing Technology, vol. 100, no. 1-4, pp. 843-855, 2019. 2.496 2019
348 S. S. Warsi, S. R. Ahmad, H. I. Jaffery, M. H. Agha, and M. Khan, “Sustainable machining: a comprehensive analysis of energy consumption during turning of Al 6061 T6 alloy,” 2019. 2019
349 T. Zahid, A. Baqai, and T. Schmidt, “meta-heuristics approach for the development of alternative process plans in reconfigurable systems,” 2019. 2019
350 T. Zahid, M. H. Agha, and T. Schmidt, “Investigation of surrogate measures of ro­bustness for project scheduling problems,” Computers & Industrial Engineering, vol. 129, pp. 220-227, 2019. 3.518 2019
351 Q. Mahmood and M. A. Qadir, “A comprehensive analysis of content-based similarity techniques for finding the redundancies and missing gaps in research papers features utilization,” 2019. 2019
352 I. Ihsan and M. A. Qadir, “CCRO: Citation’s Context & Reasons Ontology,” IEEE Access, vol. 7, pp. 30 423-30 436, 2019. 3.557 2019
353 M. U. Sadiq, M. M. Yousaf, L. Aslam, M. Aleem, S. Sarwar, and S. W. Jaffry, “NvPD: novel parallel edit distance algorithm, correctness, and performance evaluation,” Clus­ter Computing, pp. 1-16, 2019. 1.851 2019
354 M. Ullah, M. A. Islam, R. Khan, M. Aleem, and M. A. Iqbal, “Obsecure logging (OSLo): A framework to protect and evaluate the web search privacy in health care domain,” Journal of Medical Imaging and Health Informatics, vol. 9, no. 6, pp. 1181-1190, 2019. 0.499 2019
355 M. A. Iqbal, M. Aleem, M. Ibrahim, S. Anwar, and M. A. Islam, “Amazon cloud computing platform EC2 and VANET simulations,” International Journal of Ad Hoc and Ubiquitous Computing, vol. 30, no. 3, pp. 127-136, 2019. 0.648 2019
356 R. Khan, M. A. Islam, M. Ullah, M. Aleem, and M. A. Iqbal, “Privacy exposure mea­sure: A privacy-preserving technique for health-related web search,” Journal of Medical Imaging and Health Informatics, vol. 9, no. 6, pp. 1196-1204, 2019. 0.499 2019
357 F. Shahid, M. Aleem, M. A. Islam, M. A. Iqbal, M. M. Yousaf et al., “A review of technological tools in teaching and learning computer science,” Eurasia Journal of Mathematics, Science and Technology Education, vol. 15, no. 11, 2019. 2019
358 A. Hussain, M. Aleem, M. A. Iqbal, and M. A. Islam, “Investigation of cloud scheduling algorithms for resource utilization using cloudsim.” Computing & Informatics, vol. 38, no. 3, 2019. 0.421 2019
359 Y. N. Khalid, M. Aleem, U. Ahmed, M. A. Islam, and M. A. Iqbal, “Troodon: a machine-learning based load-balancing application scheduler for CPU-GPU system,” Journal of Parallel and Distributed Computing, vol. 132, pp. 79-94, 2019. 1.815 2019
360 M. Aleem, R. Prodan, M. A. Islam, and M. A. Iqbal, “On the parallel programmability of java symphony for multi-cores and clusters,” International Journal of Ad Hoc and Ubiquitous Computing, vol. 30, no. 4, pp. 247-264, 2019. 0.648 2019
361 A. Hussain, M. Aleem, M. A. Iqbal, and M. A. Islam, “SLA-RALBA: cost-efficient and resource-aware load balancing algorithm for cloud computing,” The Journal of Supercomputing, pp. 1-27, 2019. 1.532 2019
362 A. Shahid, M. T. Afzal, M. Abdar, M. E. Basiri, X. Zhou, N. Y. Yen, and J.-W. Chang, “Insights into relevant knowledge extraction techniques: a comprehensive review,” The Journal of Supercomputing, pp. 1-39, 2019. 2.157 2019
363 U. Ahmed, H. Waqas, and M. T. Afzal, “Pre-production box-office success quotient forecasting,” Soft Computing, pp. 1-19, 2019. 2.784 2019
364 M. Ameer and M. T. Afzal, “Evaluation of h-index and its qualitative and quanti­tative variants in neuroscience,” Scientometrics, vol. 121, no. 2, pp. 653-673, 2019. 2.77 2019
365 A. M. Khan, A. Shahid, M. T. Afzal, F. Nazar, F. S. Alotaibi, and K. H. Alyoubi, “SwICS: Section-wise in-text citation score,” IEEE Access, vol. 7, pp. 137090-137102, 2019. 4.098 2019
366 R. Ghani, F. Qayyum, M. T. Afzal, and H. Maurer, “Comprehensive evaluation of h-index and its extensions in the domain of mathematics,” Scientometrics, vol. 118, no. 3, pp. 809-822, 2019. 2.173 2019
367 Q.-u. Ain, H. Riaz, and M. T. Afzal, “Evaluation of h-index and its citation intensity based variants in the field of mathematics,” Scientometrics, vol. 111, no. 1, pp. 187-211, 2019. 2.173 2019
368 M. T. Ikram and M. T. Afzal, “Aspect based citation sentiment analysis using linguistic patterns for better comprehension of scientific knowledge,” Scientometrics, vol. 119, no. 1, pp. 73-95, 2019, 2.173 2019
369 R. Habib and M. T. Afzal, “Sections-based bibliographic coupling for research paper recommendation,” Scientometrics, vol. 119, no. 2, pp. 643-656, 2019. 2.173 2019
370 S. Ur Rehman, A. Nadeem, and M. A. Sindhu, “Towards automated testing of multi­agent systems using prometheus design models,” in The International Arab Journal of Information Technology, 2019, vol. 16, no. 1, pp. 54-65. 0.41 2019
371 M. Rizwan, A. Nadeem, and M. A. Sindhu, “Analyses of classifier’s performance mea­sures used in software fault prediction studies,” IEEE Access, vol. 7, pp. 82 764-82 775, 2019. 4.098 2019
372 N. M. Minhas, S. Masood, K. Petersen, and A. Nadeem, “A systematic mapping of test case generation techniques using UML interaction diagram,” Journal of Software: Evolution and Process, 2019. 1.305 2019
373 S. R. Aziz, T. Khan, and A. Nadeem, “Experimental validation of inheritance metrics’ impact on software fault prediction,” IEEE Access, vol. 7, pp. 85 262-85 275, 2019. 4.098 2019
374 F. Nazir, M. N. Majeed, M. A. Ghazanfar, and M. Maqsood, “An Arabic mispronunci­ation detection system based on frequency of mistakes for Asian speakers,” 2019. 2019
375 S. Afzal, M. Maqsood, F. Nazir, U. Khan, F. Aadil, K. M. Awan, I. Mehmood, and O.-Y. Song, “A data augmentation-based framework to handle class imbalance prob­lem for Alzheimer’s stage detection,” IEEE Access, vol. 7, pp. 115 528-115 539. 4.098 2019
376 M. Maqsood, F. Nazir, U. Khan, F. Aadil, H. Jamal, I. Mehmood, and O.-y. Song, “Transfer learning assisted classification and detection of alzheimer’s disease stages using 3D MRI scans,” Sensors, vol. 19, no. 11, p. 2645, 2019. 3.031 2019
377 F. Nazir, M. N. Majeed, M. A. Ghazanfar, and M. Maqsood, “Mispronunciation detection using deep convolutional neural network features and transfer learning- based model for Arabic phonemes,” IEEE Access, vol. 7, pp. 52 589-52 608, 2019. 4.098 2019
378 F. Nazir, M. A. Ghazanfar, M. Maqsood, F. Aadil, S. Rho, and I. Mehmood, “So­cial media signal detection using tweets volume, hashtag, and sentiment analysis,” Multimedia Tools and Applications, vol. 78, no. 3, pp. 3553-3586, 2019. 2.101 2019
379 K. Shaukat, N. Masood, and M. Khushi, “A novel approach to data extraction on hyperlinked webpages,” Applied Sciences, vol. 9, no. 23, p. 5102, 2019. 2019
380 U. Ahmed, M. Aleem, Y. Noman Khalid, M. Arshad Islam, and M. Azhar Iqbal, “RALB-HC: a resource-aware load balancer for heterogeneous cluster,” Concurrency and Computation: Practice and Experience, p. e5606, 2019. 1.447 2019
381 M. Ubaid Ur Rehman, M. Aleem, M. A. Islam, and S. Ahmed, “Smart applications for diabetes management: A comprehensive survey and ranking,” Health Informatics Journal, p. 1460458219869159, 2019. 2.297 2019
382 I. Qasim, M. W. Anwar, F. Azam, H. Tufail, W. H. Butt, and M. N. Zafar, “An introduction to model-driven mobile HMI Framework (MMHF) for industrial control systems,” 2019. 2019
383 I. Qasim, M. W. Anwar, F. Azam, H. Tufail, W. H. Butt, and M. N. Zafar, “A model- driven mobile HMI Framework (MMHF) for industrial control systems,” IEEE Access, vol. 8, pp. 10 827-10 846, 2019. 4.098 2019
384 M. Zahid, I. Inayat, M. Daneva, and Z. Mehmood, “A security risk mitigation frame­work for cyber physical systems,” Journal of software: Evolution and Process, p. e2219, 2019. 1.305 2019
385 M. T. Khan and S. I. Malik, “Structural dynamics behind variants in pyrazinamidase and pyrazinamide resistance,” Journal of Biomolecular Structure and Dynamics, pp. 1-15, 2019. 3.31 2019
386 M. T. Khan, A. C. Kaushik, A. I. Bhatti, Y.-J. Zhang, S. Zhang, A. J. Wei, S. I. Malik, and D. Q. Wei, “Marine natural products and drug resistance in latent tuberculosis,” Marine Drugs, vol. 17, no. 10, p. 549, 2019. 3.772 2019
387 A. U. Rehman, M. T. Khan, H. Liu, A. Wadood, S. I. Malik, and H.-F. Chen, “Ex­ploring the pyrazinamide drug resistance mechanism of clinical mutants T370P and W403G in Ribosomal Protein S1 of mycobacterium tuberculosis,” Journal of chemical information and modeling, vol. 59, no. 4, pp. 1584-1597, 2019. 3.966 2019
388 S. I. Malik, S. Ali, N. Masood, T. Nadeem, A. S. Khan, M. T. Afzal et al., “Pyrazinamide resistance and mutations in pncA among isolates of Mycobacterium tubercu­losis from Khyber Pakhtunkhwa, Pakistan,” BMC infectious diseases, vol. 19, no. 1, p. 116, 2019. 2.62 2019
389 M. T. Khan, A. C. Kaushik, S. I. Malik, S. Ali, and D. Wei, “Artificial neural networks for prediction of tuberculosis disease,” Frontiers in microbiology, vol. 10, no. 1, p. 395. 1.232 2019
390 E. Dilshad, N. Zahra, Z. Nooruddin, A. Butt, and S. m. Bakhtiar, “Single-cell editing: The CRISPR/Cas9 and applications,” pp. 397-415, 2019. 2019
391 H. Raja, E. Dilshad, S. Tayyaba, and A. Amin, “Isolation and screening of bacteria for their role in oil recovery and metal tolerance from petroleum reservoirs,” 2019. 2019
392 S. Rehman, K. Keefover-Ring, I. ul Haq, E. Dilshad, M. I. Khan, N. Akhtar, and B. Mirza, “Drier climatic conditions increase with an olide content of with an iacoagulans enhancing its inhibitory potential against human prostate cancer cells,” Applied biochemistry and biotechnology, vol. 188, no. 2, pp. 460-480, 2019. 2.14 2019
393 I. Younus, H. Ismail, E. D. Chahat Batool Rizvi, K. Saba, B. Mirza, and M. Tahir, “Antioxidant, analgesic and anti-inflammatory activities of in vitro and field-grown iceberg lettuce extracts,” Journal of Pharmacy & Pharmacognosy Research, vol. 7, no. 5, pp. 343-355, 2019. 2019
394 E. Dilshad, S. S. Tazeem, Z. Bashir, A. H. Iqbal, A. S. Khokhar, N. Zahra, M. A. Khan, H. Ismail, and M. Shabbir, “Silver nanoparticles of aloe vera gel as strong therapeutic candidates,” 2019
395 A. Kazmi, M. A. Khan, and H. Ali, “Biotechnological approaches for production of bioactive secondary metabolites in Nigella sativa: an up-to-date review,” International Journal of Secondary Metabolite, vol. 6, no. 2, pp. 172-195, 2019. 2019
396 H. Ali, M. A. Khan, W. K. Kayani, E. Dilshad, R. Rani, and R. S. Khan, “Production of biomass and medicinal metabolites through adventitious roots in ajuga bracteosa under different spectral lights,” Journal of Photochemistry and Photobiology B: Biology, vol. 193, pp. 109-117, 2019. 4.067 2019
397 S. Zafar, E. Dilshad, H. Ismail, C. B. Rizvi, and B. Mirza, “Rol genes enhance content of artemisinin and other secondary metabolites in shennong hybrid of artemisia annua,” Chinese Herbal Medicines, vol. 11, no. 2, pp. 209-215, 2019. 2019
398 M. S. Khan, B. Mehmood, Q. Yousafi, S. Bibi, S. Fazal, S. Saleem, M. W. Sajid, A. Ihsan, M. Azhar, and M. A. Kamal, “Molecular docking studies reveals rhein from rhubarb (Rheum rhabarbarum) as a putative inhibitor of ATP-binding Cassette Super Family G member 2,” Medicinal chemistry (Shariqah (United Arab Emirates)), 2019. 2019
399 A. Kanwal, S. Fazal, A. I. Bhatti, M. Ullah, and M. A. Khalid, “PubMedInfo Crawler: An innovative extraction process that leads towards biological information mining,” Meta Gene, vol. 20, p. 100550, 2019. 2019
400 A. Amin, I. Ahmed, N. K. Khalid, P. Schumann, and H. Jurgen, “Arthrobacter zafarii sp. nov., a moderately thermotolerant and halotolerant actinobacterium isolated from Cholistan desert soil of Pakistan,” International Journal of Systematic and Evolution­ary Microbiology, 2019. 2.166 2019
401 A. Amin, I. Ahmed, N. Khalid, I. U. Khan, and A. Ali, “Bacterial diversity of cholistan desert, Pakistan: insights on the comparative analysis between different arid zones,” Microorganisms, 2019. 4.167 2019
402 E. Dilshad, N. Zahra, Z. Nooruddin, A. A. Butt, and S. M. Bakhtiar, “Single-cell editing: The CRISPR/Cas9 and applications,” in Single-Cell Omics. Elsevier, 2019, pp. 397-415. 2019
403 F. Nawaz, M. N. Khan, A. Javed, I. Ahmed, N. Ali, M. I. Ali, S. M. Bakhtiar, and M. Imran, “Genomic and functional characterization of enterococcus mundtii QAUEM2808, isolated from artisanal fermented milk product dahi,” Frontiers in Mi­crobiology, vol. 10, 2019. 4.259 2019
404 H. Qayyum and S. M. Bakhtiar, “Single Cell Omics in cardiovascular disease,” 2019. 2019
405 M. Nadeem, U. Naz, and S. M. Bakhtiar, “TNF: common culprit of inflammatory diseases,” International Journal of Bioautomation, 2019. 1.35 2019
406 S. A and S. M. Bakhtiar, “Etiology, prevalence, treatment of causing syndrome and its involvement with other diseases,” Precision Medicine, vol. 3, 2019. 2019
407 F. M and S. M. Bakhtiar, “Homochromatosis- the trigger of type ii diabetes,” Precision Medicine, vol. 3, 2019. 2019
408 H. A. Butt, S. Gul, A. Azam, A. Aftab, and S. M. Bakhtiar, “Nutrigenetics and pharmacogenetics approaches in management of obesity,” Precision Medicine, vol. 3, 2019. 2019
409 I. S. Naveed, N. Afzal, M. Fiyaz, M. Nadeem, and S. M. Bakhtiar, “Precision medicine for multifactorial disorders,” Precision Medicine, vol. 3, 2019. 2019
410 H. Saira, A. Noor, I. Riasat, M. Qasim, and S. M. Bakhtiar, “Etiology, genetics, clinical manifestations and possible treatments of acromegaly,” Precision Medicine, vol. 3, 2019. 2019
411 M. N. Abrar, M. Sagheer, and S. Hussain, “Entropy formation analysis for the peri­staltic motion of ferrofluids in the presence of joule heating and fluid friction phe­nomena in a plumb duct,” Journal of Nanofluids, vol. 8, no. 6, pp. 1305-1313, 2019. (IF=0.98). 2019
412 M. Sagheer, S. Shah, S. Hussain, and M. Akhtar, “Impact of non-uniform heat source/sink on magnetohydrodynamic maxwell nanofluid flow over a convectively heated stretching surface with chemical reaction,” Journal of Nanofluids, vol. 8, no. 4, pp. 795-805, 2019. 0.98 2019
413 F. Shahzad, M. Sagheer, and S. Hussain, “Numerical solution of rotating flow of a nanofluid over a stretching surface in the presence of magnetic field,” Journal of Nanofluids, vol. 8, no. 2, pp. 359-370, 2019. 0.98 2019
414 I. Rashid, M. Sagheer, and S. Hussain, “Exact solution of stagnation point flow of MHD cu-h 2 o nanofluid induced by an exponential stretching sheet with thermal conductivity,” Physica Scripta, vol. 95, no. 2, p. 025207, 2019. 2.151 2019
415 I. Rashid, M. Sagheer, and S. Hussain, “Entropy formation analysis of MHD boundary layer flow of nanofluid over a porous shrinking wall,” Physica A: Statistical Mechanics and its Applications, vol. 536, p. 122608, 2019. 2.5 2019
416 N. Akmal, M. Sagheer, S. Hussain, and A. Kamran, “Investigation of free convection in micropolar nanofluid with induced magnetic field,” The European Physical Journal Plus, vol. 134, no. 5, p. 235, 2019. 2.612 2019
417 F. Shahzad, M. Sagheer, and S. Hussain, “MHD tangent hyperbolic nanofluid with chemical reaction, viscous dissipation and joule heating effects,” AIP Advances, vol. 9, no. 2, p. 025007, 2019. 1.579 2019
418 N. Akmal, M. Sagheer, S. Hussain, and A. Kamran, “Study of micropolar nanofluids with power-law spin gradient viscosity model by the keller box method,” Canadian Journal of Physics, vol. 98, no. 1, pp. 16-27, 2019. 1.016 2019
419 S. Batul, R. Ali, D. Shehwar, and N. Husain, “Nadler’s fixed-point theorem in c? – algebra valued metric spaces with applications,” 2019. 2019
420 S. Inam, S. Kanwal, and R. Ali, “Cryptosystem based on polynomials over circulant matrices,” 2019. 2019
421 M. Zia and R. Ali, “Cryptanalysis of an encryption scheme that uses elliptic curve over finite field,” 2019. 2019
422 F. Mehmood, R. Ali, and N. Hussain, “Fixed point result s for multivalued mappings in extended fuzzy b-metric space,” 2019. 2019
423 M. Sohail Ashraf, R. Ali, and N. Hussain, “New fixed-point results in generalized fuzzy metric spaces with applications,” 2019. 2019
424 R. Ali, M. Mubashar, and S. Batul, “A groebner bas is attack on a multivariate poly­nomial public key cryptosystem,” 2019. 2019
425 F. Mehmood, R. Ali, and N. Hussain, “Contractions in fuzzy rectangular b-metric spaces with application,” Journal of Intelligent & Fuzzy Systems, no. Preprint, pp. 1-11, 2019. 1.637 2019
426 M. Zia and R. Ali, “Cryptanalysis and improvement of blind signcryption scheme based on elliptic curve,” Electronics Letters, vol. 55, no. 8, pp. 457-459, 2019. 1.343 2019
427 S. Atif, S. Hussain, and M. Sagheer, “Effect of thermal radiation on MHD micropolar carreau nanofluid with viscous dissipation, joule heating, and internal heating,” Scientia Iranica, vol. 26, no. 6, pp. 3875-3888, 2019. 1.017 2019
428 S. Hussain, K. Mehmood, M. Sagheer, and A. Ashraf, “Mixed convective magneto nanofluid flow over a backward facing step and entropy generation using extended darcy-brinkman-forchheimer model,” Journal of Thermal Analysis and Calorimetry, vol. 138, 2019. 2.731 2019
429 S. M. Atif, S. Hussain, and M. Sahheer, “Numerical simulation of mixed convective magneto nanofluid flow and entropy generation over backward facing step with darcy-brinkman- forchheimer model,” Journal of Thermal Analysis and Calorimetry, vol. 138, pp. 3183-3203, 2019. 2.471 2019
430 S. Atif, S. Hussain, and M. Sagheer, “Effect of viscous dissipation and joule heating on MHD radiative tangent hyperbolic nanofluid with convective and slip conditions,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, no. 4, p. 189, 2019. 1.743 2019
431 A. Kamran, S. Hussain, and M. Sagheer, “Transport phenomena in marangoni driven Micropolar Alumina-Dihydrogen Oxide Nanofluid with thermal inertia,” Journal of Nanofluids, vol. 8, no. 5, pp. 1123-1132, 2019. 0.98 2019
432 M. Atlas, S. Hussain, and M. Sagheer, “Squeezing flow of upper convected maxwell nanofluid subject to entropy generation and cattaneo-christove double diffusion,” Jour­nal of Nanofluids, vol. 8, no. 2, pp. 420-429, 2019. 0.98 2019
433 S. Shah, S. Hussain, M. Sagheer, and M. Bilal, “Numerical study of three dimensional mixed convective maxwell nanofluid flow over a stretching surface with non-linear ther­mal radiation and convective boundary conditions,” Journal of Nanofluids, vol. 8, no. 1, pp. 160-170, 2019. 0.98 2019
434 S. Hussain, T. Armaghani, and M. Jamal, “Magnetoconvection and entropy analysis in T-Shaped porous enclosure using finite element method,” Journal of Thermophysics and Heat Transfer, pp. 1-12, 2019. 1.051 2019
435 S. Hussain, H. F. Oztop, M. A. Qureshi, and N. Abu-Hamdeh, “Magnetohydrodynamic flow and heat transfer of ferrofluid in a channel with non-symmetric cavities,” Journal of Thermal Analysis and Calorimetry, pp. 1-13, 2019. 2.471 2019
436 S. Hussain, M. Jamal, and S. E. Ahmed, “Hydrodynamic forces and heat transfer of nanofluid forced convection flow around a rotating cylinder using finite element method: The impact of nanoparticles,” International Communications in Heat and Mass Transfer, vol. 108, p. 104310, 2019. 4.127 2019
437 S. Hussain and S. E. Ahmed, “Steady natural convection in open cavities filled with a porous medium utilizing buongiorno’s nanofluid model,” International Journal of Mechanical Sciences, vol. 157, pp. 692-702, 2019. 4.134 2019
438 S. Hussain and S. E. Ahmed, “Unsteady mhd forced convection over a backward facing step including a rotating cylinder utilizing fe3o4-water ferrofluid,” Journal of Mag­netism and Magnetic Materials, vol. 484, pp. 356-366, 2019. 2.683 2019
439 S. Hussain, H. F. Oztop, K. Mehmood, and M. E. Ali, “Mixed convection and entropy production in a nanofluid-filled closed space with inclined magnetic field,” Journal of Thermal Analysis and Calorimetry, vol. 137, no. 5, pp. 1735-1755, 2019. 2.209 2019
440 S. M. Atif, S. Hussain, and M. Sagheer, “Magnetohydrodynamic stratified bioconvective flow of micropolar nanofluid due to gyrotactic microorganisms,” AIP Advances, vol. 9, no. 2, p. 025208, 2019. 1.653 2019
441 S. M. Atif, S. Hussain, and M. Sagheer, “Heat and mass transfer analysis of time- dependent tangent hyperbolic nanofluid flow past a wedge,” Physics Letters A, vol. 383, no. 11, pp. 1187-1198, 2019. 1.863 2019
442 M. Atlas, S. Hussain, and M. Sagheer, “Entropy generation and unsteady Casson fluid flow squeezing between two parallel plates subject to Cattaneo-Christov heat and mass flux,” The European Physical Journal Plus, vol. 134, no. 1, p. 33, 2019. 2.24 2019
443 J. U. Satti, M. Afzal, and R. Nawaz, “Scattering analysis of a partitioned wave-bearing cavity containing different material properties,” Physica Scripta, vol. 94, no. 11, p. 115223, 2019. 2.151 2019
444 T. Nawaz, M. Afzal, and R. Nawaz, “The scattering analysis of trifurcated waveguide involving structural discontinuities,” Advances in Mechanical Engineering, vol. 11, no. 7, p. 1687814019829282, 2019 1.024 2019
445 D. Shehwar, R. Ali, and S. Batool, “The C*-ALGEBRA valued caristi’s fixed point theorem: A graphic version,” Journal of Mathematical Analysis, vol. 10, 2019. 2019
446 M. Anwar, D. Shehwar, R. Ali, and S. Batool, “Fixed point and common fixed-point theorems on wardowski type mappings in sb-metric spaces,” 2019. 2019
447 M. Anwar, D. Shehwar, R. Ali, and N. Hussain, “Wardowski type @-F-contractive approach for nonself multivalued mappings,” University Politehnica of Bucharest Sci­entific BulletinSeries A-Applied Mathematics and Physics, 2019. 0.478 2019
448 S. Saeed and A. Hassan, “Liquidity commonality risk and asset pricing in emerging and developed stock,” NUML International Journal of Business & Management, vol. 19, no. 2, pp. 92-110, 2019. 2019
449 I. Yousaf and A. Hassan, “Linkages between crude oil and emerging Asian stock mar­kets: New evidence from the Chinese stock market crash,” Finance Research Letters, vol. 31, no. 4, pp. 207-217, 2019. 1.709 2019
450 E. Ishaq, S. Bashir, and A. K. Khan, “Paradoxical leader behaviors: Leader personality and follower outcomes,” Applied Psychology, 2019. 3.265 2019
451 E. Ishaq, S. Bashir, A. K. Khan, M. M. Hassan, and R. Zakarira, “Epistemic curiosity and perceived workload: a moderated mediation model of achievement striving and overwork climate,” The International Journal of Human Resource Management, pp. 1-24, 2019. 3.15 2019
452 A. Sarwar, S. Bashir, and A. Karim Khan, “Spillover of Workplace Bullying into Family Incivility: Testing a Mediated Moderation Model in a Time-Lagged Study,” Journal of Interpersonal Violence, p. 0886260519847778, 2019. 2.443 2019
453 L. Muhammad, I. Saba, and S. Aziz, “Maqasid al-shariah and Islamic finance industry: Addressing the concerns,” Journal of Islamic Business and Management, vol. 9, no. 2, pp. 368-376, 2019. 2019
454 A. Sarwar and L. Muhammad, “Impact of employee perceptions of mistreatment on organizational performance in the hotel industry,” International Journal of Contem­porary Hospitality Management, 2019. 3.95 2019
455 L. Muhammad, “Do service firm employee and customer relations matter for customer forgiveness in service recovery?” Asia Pacific Journal of Marketing and Logistics, vol. 29, pp. 1036-1054, 2019. 1.204 2019
456 N. T. Bhutta, B. Simonetti, and V. Ventre, “Does Islamic capital asset pricing model outperform conventional capital asset pricing model?” in Decision Making in Social Sciences: Between Traditions and Innovations, Springer, 2019, pp. 471-482, 2020. 2019
457 A. Mahmood Ahmed and S. Anwar, “Taxicab app usage: Cues inquiry and classifica­tion,” 2019. 2019
458 M. Kamran, J. Ahmed, and I. Ullah, “Does Islamic label indicate higher use of trade credit? evidence from shari ‘ah compliant non-financial firms in Pakistan,” Journal of Islamic Business and Management, vol. 9, no. 2, pp. 328-340, 2019. 2019
459 M. U. Niaz and M. Iqbal, “Effect of microfinance on women empowerment: A case study of Pakistan,” Paradigms, vol. 13, no. 1, pp. 52-59, 2019. 2019
460 M. M. Iqbal and A. Shah, “Economic rationale of the prohibition of interest: A new aspect,” Islamic Studies, vol. 58, no. 4, p. 503, 2019. 2019
461 M. Zulkifal, M. Abbas, K. Arif-ullah, N. Humaira, and A. S. Fawad, “Thiazolidine derivatives attenuate carrageenan-induced inflammatory pain in mice,” 2019. 2019
462 M. Abbas, S. Alzarea, R. L. Papke, and S. Rahman, “The a7 nicotinic acetylcholine receptor positive allosteric modulator prevents lipopolysaccharide-induced allodynia, hyperalgesia and TNF-a in the hippocampus in mice,” Pharmacological Reports, vol. 71, no. 6, pp. 1168-1176, 2019. 2.761 2019
463 F. A. Shah, G.-P. Liu, A. Kury, L. Tareq, A. Zeb, M. Abbas, T. Li, X. Yang, F. Liu, Y. Jiang et al., “Melatonin protects MCAO-induced neuronal loss via NR2A mediated prosurvival pathways,” Frontiers in pharmacology, vol. 10, p. 297, 2019. 3.845 2019
464 Z. Idris, M. Abbas, H. Nadeem, and A.-u. Khan, “The benzimidazole derivatives, b1 (n-[(1h-benzimidazol-2-yl) methyl]-4-methoxyaniline) and b8 (n-{4-[(1H-Benzimidazol- 2-yl) Methoxy] Phenyl} acetamide) attenuate morphine-induced paradoxical pain in mice,” Frontiers in neuroscience, vol. 13, 2019. 3.648 2019
465 H. Bibi, H. Nadeem, M. Abbas, and M. Arif, “Synthesis and anti-nociceptive potential of isoxazole carboxamide derivatives,” BMC Chemistry, vol. 13, no. 1, p. 6, 2019. 2019
466 N. S. Malik, M. Ahmads, M. U. Minhas, and Q. Khalid, “Determination of acyclovir in rabbit plasma by high performance liquid Chromatographic (hplc) Technique,” Acta Polpniae Pharmaceutica, vol. 76, no. 3, pp. 421-429, 2019. 0.447 2019
467 S. Bashir, A. Khan, and M. Mahmood, “Evaluation of the learning environment in pharmacy institutes of pakistan,” 2019. 2019
468 S. Bashir, “Pharmacological importance of manilkara zapota and its bioactive con­stituents,” Boletin Latinoamericano Y Del Caribe de Plantas Medicinales Y Aromati cas, vol. 18, no. 4, pp. 347-358, 2019. 0.5 2019
469 S. Rehman, M. M. Ahmed, U. Rafique, and M. N. Khan, “A nonlinear model to assess DC/AC performance reliability of submicron SiC MESFETs,” Journal of Computational Electronics, pp. 1–11, 2018. 1.526 2018
470 Z. Ahmed, M. M. Ahmed, and M. B. Ihsan, “A novel differential fed high gain patch antenna using resonant slot loading,” Radioengineering, vol. 27, no. 3, pp. 662–670, 2018. 1.048 2018
471 Z. Ahmed, M. M. Ahmed, M. B. Ihsan, A. A. Chaudhary, and J. K. Arif, “Novel dual band patch antenna with gap coupled composite right/left-handed transmission line,” International Journal of Microwave and Wireless Technologies, pp. 1–7, 2018. 0.745 2018
472 M. N. Khan, U. F. Ahmed, M. M. Ahmed, and S. Rehman, “An improved model to assess temperature-dependent DC characteristics of submicron GaN HEMTs,” Journal of Computational Electronics, vol. 17, no. 2, pp. 653–662, 2018. 1.0431 2018
473 M. Riaz, M. M. Ahmed, U. Rafique, and U. F. Ahmed, “Assessment of intrinsic small signal parameters of submicron SiC MESFETs,” Solid-State Electronics, vol. 139, pp. 80–87, 2018. 1.666 2018
474 U. Qazi, M. R. Ali, and A. Moqueet, “An estimation of the impact of uninterpretable power supply systems on electricity distribution utility of Pakistan,” Journal of Basic and Applied Sciences, vol. 14, pp. 92–97, 2018. 2018
475 S. M. Shah, R. Samar, and M. A. Z. Raja, “Fractional-order algorithms for tracking rayleigh fading channels,” Nonlinear Dynamics, vol. 92, no. 3, pp. 1243–1259, 2018. 1.4339 2018
476 Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of epidemic computer virus model with effect of quarantine in the presence of immunity,” Fundamenta Informaticae, vol. 161, no. 3, pp. 249–273, 2018. 0.725 2018
477 A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle based control oriented model of a gasoline engine including multi-cylinder dynamics,” Control Engineering Practice, vol. 70, pp. 63–76, 2018. 2.616 2018
478 M. R. Azam, S. Fazal, M. Ullah, and A. I. Bhatti, “System-based strategies for p53 recovery,” IET Systems Biology, vol. 12, no. 3, pp. 101–107, 2018. 0.573 2018
479 A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle based control oriented gasoline engine model including lumped cylinder dynamics,” Journal of Dynamic Systems, Measurement, and Control, vol. 140, no. 8, pp. 1–9, 2018. 1.521 2018
480 A. Jafar, A. I. Bhatti, A. S. M, and N. Ahmed, “Robust gain scheduled control algorithm for lab helicopter: An LMI based approach,” IMECH Journal of Systems and Control Engineering, pp. 1–14, 2018. 1.442 2018
481 M. T. Khan, S. I. Malik, A. I. Bhatti, S. Ali, A. S. Khan, M. T. Zeb, T. Nadeem, and S. Fazal, “Pyrazinamide-resistant mycobacterium tuberculosis isolates from Khyber Pakhtunkhwa and rpsA mutations,” Journal of Biological Regulators and Homeostatic Agents, vol. 32, no. 3, pp. 705–709, 2018. 1.397 2018
482 A. Munir, S. Azam, S. Fazal, and A. I. Bhatti, “Evaluation of the whole body physiologically based pharmacokinetic (wb-pbpk) modeling of drugs,” Journal of Theoretical Biology, vol. 451, pp. 1–9, 2018. 1.8333 2018
483 A. Jafar, A. I. Bhatti, S. M. Ahmad, and N. Ahmed, “H∞ optimization-based robust decoupling control algorithm in linear parameter varying systems using hadamard weighting,” Transactions of the Institute of Measurement and Control, pp. 1–16, 2018. 1.574 2018
484 A. M. Chaudhry, A. Arshad Uppal, Y. M. Alsmadi, A. I. Bhatti, and V. I. Utkin, “Robust multi-objective control design for underground coal gasification energy conversion process,” International Journal of Control, pp. 1–17, 2018. 2.101 2018
485 U. Rafique and S. U. Din, “Beveled-shaped super-wideband planar antenna,” Turkish Journal of Electrical Engineering and Computer Sciences, pp. 1–9, 2018. 0.58 2018
486 S. Naz, R. N. B. Rais, P. A. Shah, S. Yasmin, A. Qayyum, S. Rho, and Y. Nam, “A dynamic caching strategy for CCN-based MANETs,” Computer Networks, vol. 142, pp. 93–107. 2018
487 K. A. Khaliq, S. M. Raza, O. Chughtai, A. Qayyum, and J. Pannek, “Experimental validation of an accident detection and management application in vehicular environment,” Computers & Electrical Engineering, vol. 71, pp. 137–150, 2018. 1.747 2018
488 M. Raza, N. Aslam, H. Le-Minh, S. Hussain, Y. Cao, and N. M. Khan, “A critical analysis of research potential, challenges, and future directives in industrial wireless sensor networks,” IEEE Communications Surveys & Tutorials, vol. 20, no. 1, pp. 39–95, 2018 20.23 2018
489 M. Y. M. Mirza, N. M. Khan, A. Jamal, and R. Ramer, “Characterization of spatial reflection co-efficient for ground-to-aircraft and satellite-to-aircraft communication.,” Applied Computational Electromagnetics Society Journal, vol. 33, no. 1, 2018. 0.59 2018
490 M. Y. Wani, M. Riaz, and N. M. Khan, “Geometrical modeling of scattering environment for highways in umbrella cell based MIMO communication systems,” Wireless Personal Communications, vol. 101, no. 1, pp. 59–74, 2018. 1.2 2018
491 A. Yasin, M. Ashraf, and A. Bhatti, “Fixed frequency sliding mode control of power con¬verters for improved dynamic response in dc micro-grids,” Energies, vol. 11, no. 10, p. 2799, 2018. 2.676 2018
492 M. Rashad, M. Ashraf, A. I. Bhatti, D. M. Minhas, and B. A. Ahmed, “Mathematical modeling and stability analysis of DC microgrid using SM hysteresis controller,” International Journal of Electrical Power & Energy Systems, vol. 95, pp. 507–522, 2018. 3.61 2018
493 M. Rashad, U. Raoof, M. Ashraf, and B. Ashfaq Ahmed, “Proportional load sharing and stability of dc microgrid with distributed architecture using SM controller,” Mathematical Problems in Engineering, vol. 2018, 2018. 1.145 2018
494 M. Sajid, I. A. Taj, U. I. Bajwa, and N. I. Ratyal, “Facial asymmetry-based age group estimation: Role in recognizing age-separated face images,” Journal of forensic sciences, 2018. 2018
495 M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and M. Tahir, “An efficient framework for prediction parameters selection in advanced video coding,” IEEE Access, 2018. 3.557 2018
496 M. Ghafoor, S. Iqbal, S. A. Tariq, and N. M. Taj, Imtiaz A Jafri, “Efficient fingerprint matching using graphical processing unit,” IET Image Processing, vol. 12, no. 2, p. 274, 2018. 1.401 2018
497 N. Ratyal, I. Taj, U. Bajwa, and M. Sajid, “Pose and expression invariant alignment based multi-view 3D face recognition.,” KSII Transactions on Internet & Information Systems, vol. 12, no. 10, 2018. 0.611 2018
498 W. Abbasi, I. Shah, et al., “Smooth super twisting sliding mode based steering control for nonholonomic systems transformable into chained form,” Kybernetika, vol. 54, no. 3, pp. 476–495, 2018. 0.632 2018
499 S. ud Din and F. ur Rehman, “Synchronization of a novel 4-D hyperchaotic rikitake dynamo system along with unknown parameters via adaptive integral sliding mode,” Journal of Control Engineering and Applied Informatics, vol. 20, no. 1, pp. 108–118, 2018. 2018
500 S. ud Din, F. ur Rehman, and Q. Khan, “Smooth super-twisting sliding mode control for the class of underactuated systems,” PloS one, vol. 13, no. 10, p. e0203667, 2018. 2.766 2018
501 I. Shah and F. U. Rehman, “Smooth second order sliding mode control of a class of under-actuated mechanical systems,” IEEE Access, vol. 6, pp. 7759–7771, 2018. 3.557 2018
502 M. Khan and M. Ali, “Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber,” Construction and Building Materials, vol. 182, pp. 703–715, 2018. 3.485 2018
503 M. U. Farooqi and M. Ali, “Contribution of plant fibers in improving the behavior and capacity of reinforced concrete for structural applications,” Construction and Building Materials, vol. 182, pp. 94–107, 2018. 3.485 2018
504 F. Qamar, T. Thomas, and M. Ali, “Use of natural fibrous plaster for improving the out of plane lateral resistance of mortarless interlocked masonry walling,” Construction and Building Materials, vol. 174, pp. 320–329, 2018. 0.485 2018
505 M. Khan and M. Ali, “Effectiveness of hair and wave polypropylene fibers for concrete roads,” Construction and Building Materials, vol. 166, pp. 581–591, 2018. 3.485 2018
506 M. Ali, “Role of post-tensioned coconut-fibre ropes in mortar-free interlocking concrete construction during seismic loadings,” KSCE Journal of Civil Engineering, vol. 22, no. 4, pp. 1336–1343, 2018. 0.812 2018
507 M. Ahmed and T. Mahmood, “Elastic-displacement-based multi-modal pushover analysis in high-rise core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, pp. 1–22, 2018. 1.5 2018
508 M. M. Khan, J. H´elie, and M. Gorokhovski, “Computational methodology for nonevaporating spray in quiescent chamber using large eddy simulation,” International Journal of Multiphase Flow, vol. 102, pp. 102–118, 2018. 2.592 2018
509 M. Ebrahem, S. Manzoor, N. A. Sheikh, M. Ali, and M. M. Khan, “Numerical investigation of transient response of a coupled two-degrees-of-freedom symmetric airfoil before flutter,” International Journal of Aeroacoustics, vol. 17, no. 3, pp. 275–294, 2018. 0.623 2018
510 S. S. Warsi, S. H. I. Jaffery, R. Ahmad, M. Khan, M. H. Agha, and L. Ali, “Development and analysis of energy consumption map for high-speed machining of Al 6061-T6 alloy,” The International Journal of Advanced Manufacturing Technology, pp. 1–12, 2018. 2.209 2018
511 A. Ayub, N. A. Sheikh, R. Tariq, M. M. Khan, and C. M. Invernizzi, “Exergetic optimization and comparison of combined gas turbine supercritical CO2 power cycles,” Journal of Renewable and Sustainable Energy, vol. 10, no. 4, pp. 1–23, 2018. 1.387 2018
512 M. Irfan and M. Muradoglu, “A front tracking method for particle-resolved simulation of evaporation and combustion of a fuel droplet,” Computers & Fluids, 2018. 2.21 2018
513 H. Rafiq, M. Aleem, and M. A. Islam, “On the evaluation of android malware detectors,” Sukkur IBA Journal of Computing and Mathematical Sciences, vol. 2, no. 1, pp.20–28, 2018. 2018
514 H. Murtaza, M. A. Iqbal, M. A. Islam, and M. Aleem, “Content-aware reliable and energy-efficient MAC (CARE-MAC) protocol for wireless body area networks,” Ad Hoc & Sensor Wireless Networks, 2018. 1.034 2018
515 M. A. Iqbal, B. Dai, M. A. Islam, M. Aleem, and N.-S. Vo, “Topology-based floworiented adaptive network coding-aware routing scheme for VANETs,” KSII Transactions on Internet & Information Systems, vol. 12, no. 5, pp. 2044–2062, 2018. 0.452 2018
516 M. Ibrahim, M. A. Iqbal, M. Aleem, and M. A. Islam, “SIM-cumulus: An academic cloud for the provisioning of Network-Simulation-as-a-Service (NSaaS),” IEEE Access, vol. 6, pp. 27 313–27 323, 2018. 3.244 2018
517 A. Hussain, M. Aleem, A. Khan, M. A. Iqbal, and M. A. Islam, “RALBA: A computation-aware load balancing scheduler for cloud computing,” Cluster Computing, pp. 1–14, 2018. 2.04 2018
518 Y. N. Khalid, M. Aleem, R. Prodan, M. A. Iqbal, and M. A. Islam, “E-OSched: A load balancing scheduler for heterogeneous multicores,” The Journal of Supercomputing, pp. 1–33, 2018 1.326 2018
519 M. A. Jaffar, M. S. Zia, M. Hussain, A. B. Siddiqui, S. Akram, and U. Jamil, “An ensemble shape gradient features descriptor based nodule detection paradigm: A novel model to augment complex diagnostic decisions assistance,” Multimedia Tools and Applications, pp. 1–27, 2018. 1.53 2018
520 S. U. R. Khan, M. A. Islam, M. Aleem, and M. A. Iqbal, “Temporal specificity based text classification for information retrieval,” Turkish Journal of Electrical Engineering & Computer Science, 2018. 0.52 2018
521 M. Raheel, S. Ayaz, and M. T. Afzal, “Evaluation of h-index, its variants and extensions based on publication age & citation intensity in civil engineering,” Scientometrics, vol. 114, no. 3, pp. 1107–1127, 2018. 2.147 2018
522 M. T. Ikram, M. T. Afzal, and N. A. Butt, “Automated citation sentiment analysis using high order n-grams: A preliminary investigation,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 26, no. 4, pp. 1922–1932, 2018. 2.573 2018
523 M. T. Khan, S. I. Malik, S. Ali, A. Sheed Khan, T. Nadeem, M. T. Zeb, N. Masood, and M. T. Afzal, “Prevalence of pyrazinamide resistance in Khyber Pakhtunkhwa, Pakistan,” Microbial Drug Resistance, 2018. 2.344 2018
524 S. Haider, M. Tanvir Afzal, M. Asif, H. Maurer, A. Ahmad, and A. Abuarqoub, “Impact analysis of adverbs for sentiment classification on twitter product reviews,” Concurrency and Computation: Practice and Experience, p. e4956, 2018. 1.114 2018
525 F. Qayyum and M. T. Afzal, “Identification of important citations by exploiting research articles metadata and cue-terms from content,” Scientometrics, pp. 1–23, 2018. 2.173 2018
526 A. Y. Khan, A. S. Khattak, and M. T. Afzal, “Extending co-citation using sections of research articles,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 26, no. 6, pp. 3345–3355, 2018. 0.52 2018
527 R. Ahmad and M. T. Afzal, “CAD: an algorithm for citation anchors detection in research papers,” Scientometrics, vol. 117, no. 3, pp. 1405–1423, 2018. 2.173 2018
528 A. Hussain, M. Aleem, M. A. Islam, and M. A. Iqbal, “A rigorous evaluation of state-of¬the-art scheduling algorithms for cloud computing,” IEEE Access, 2018. 3.557 2018
529 S. U. R. Khan, M. A. Islam, M. Aleem, M. A. Iqbal, and U. Ahmed, “Section-based focus time estimation of news articles,” IEEE Access, vol. 6, pp. 75452–75460, 2018. 3.55 2018
530 A. Kanwal and S. Fazal, “Construction and analysis of protein-protein interaction network correlated with ankylosing spondylitis,” Gene, vol. 638, pp. 41–51, 2018. 2.498 2018
531 A. Munir, S. Azam, S. Aslam, A. Mehmood, G. M. Shah, S. Amjad, M. Younis, and S. Fazal, “Computational design of small interfering rnas and small hairpin rnas to silence mutated p53 gene expressions,” Informatics in Medicine Unlocked, vol. 12, pp. 1–5, 2018. 2018
532 N. Noureen, S. Fazal, A. M. Qaider, and A. Tanvir, “Hcvs: Pinpointing chromatin states through hierarchical clustering and visualization scheme,” Current Bioinformatics, 2018. 0.54 2018
533 W. K. Kayani, B. H. Kiani, E. Dilshad, and B. Mirza, “Biotechnological approaches for artemisinin production in artemisia,” World Journal of Microbiology and Biotechnology, vol. 34, no. 4, p. 54, 2018. 2018
534 A. Munir, S. Hussain, and E. Dilshad, “Silver nanoparticles conjugated with neurotrophin 3 upregulate myelin gene transcription pathway,” Journal of theoretical biology, vol. 459, pp. 111–118, 2018. 2018
535 S. Hussain, J. Z. K. Khattak, M. Ismail, Q. Mansoor, and M. H. Khan, “Molecular charac-terization of deafness in autosomal recessive pedigrees of Khyber Pakhtunkhwa Pakistan,” Pakistan Journal of Pharmaceutical Sciences, vol. 31, no. 1, pp. 51–56, 2018. 2018
536 M. T. Khan, A. U. Rehaman, M. Junaid, S. I. Malik, and D.-Q. Wei, “Insight into novel clinical mutants of RpsA-S324F, E325K, and G341R of mycobacterium tuberculosis asso¬ciated with pyrazinamide resistance,” Computational and structural biotechnology journal, vol. 16, pp. 379–387, 2018. 2018
537 M. Khan, S. Malik, A. Bhatti, S. Ali, A. Khan, M. Zeb, T. Nadeem, and S. Fazal, “Pyrazinamide-resistant mycobacterium tuberculosis isolates from khyber pakhtunkhwa and rpsA mutations.,” Journal of biological regulators and homeostatic agents, vol. 32, no. 3, p. 705, 2018. 0.54 2018
538 M. Anum, S. I. Malik, and K. A. Malik, “Proteome mining for the identification of putative drug targets for human pathogen clostridium tetani,” Current Bioinformatics, 2018. 0.54 2018
539 A. Munir, S. I. Malik, and K. A. Malik, “De-novo ligand design against mutated huntington gene by ligand-based pharmacophore modeling approach.,” Current computer-aided drug design, 2018. 2018
540 S. Atif, S. Hussain, and M. Sagheer, “Numerical study of mhd micropolar carreau nanofluid in the presence of induced magnetic field,” AIP Advances, vol. 8, no. 3, p. 035219, 2018. 1.178 2018
541 D.-C. Lu, M. Ramzan, M. Bilal, J. D. Chung, and U. Farooq, “Upshot of chemical species and nonlinear thermal radiation on oldroyd-B nanofluid flow past a bidirectional stretched surface with heat generation/absorption in a porous media,” Communications in Theoretical Physics, vol. 70, pp. 71–80, 2018. 1.175 2018
542 T. Sajid, M. Sagheer, S. Hussain, and M. Bilal, “Darcy-forchheimer flow of Maxwell nanofluid flow with nonlinear thermal radiation and activation energy,” AIP Advances, vol. 8, no. 3, p. 035102, 2018. 1.565 2018
543 M. Sagheer, M. Bilal, S. Hussain, and R. N. Ahmed, “Thermally radiative rotating magneto-nanofluid flow over an exponential sheet with heat generation and viscous dissipation: A comparative study,” Communications in Theoretical Physics, vol. 69, no. 3, p. 317, 2018. 1.178 2018
544 S. Atif, S. Hussain, and M. Sagheer, “Numerical study of mhd micropolar carreau nanofluid in the presence of induced magnetic field,” AIP Advances, vol. 8, no. 3, p.035219, 2018. 1.653 2018
545 M. Atlas, S. Hussain, and M. Sagheer, “Entropy generation and squeezing flow past a riga plate with cattaneo-christov heat flux,” Bulletin of the Polish Academy of Sciences: Technical Sciences, 2018. 1.361 2018
546 S. Shah, S. Hussain, and M. Sagheer, “Thermal stratification effects on mixed convective maxwell fluid flow with variable thermal conductivity and homogeneous/heterogeneous reactions,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 9, p. 452, 2018. 1.627 2018
547 S. Hussain, H. F. Oztop, K. Mehmood, and M. E. Ali, “Control of combined convection in a nanofluid-filled lid-driven closed space via rectangular bar in the presence of magnetic field,” Journal of Thermal Analysis and Calorimetry, pp. 1–18, 2018. 2.209 2018
548 A. Kamran, S. Hussain, and M. Sagheer, “Impact of induced magnetic field on free convec¬tive flow of kerosene/water based single and multiwalled carbon nanotubes,” AIP Advances, vol. 8, no. 10, p. 105130, 2018. 1.653 2018
549 S. Hussain, S. E. Ahmed, and F. Saleem, “Impact of periodic magnetic field on entropy generation and mixed convection,” Journal of Thermophysics and Heat Transfer, pp. 1–14, 2018. 1.085 2018
550 M. Zia and R. Ali, “Cryptanalysis and improvement of an elliptic curve based signcryption scheme for firewalls,” PloS one, vol. 13, no. 12, p. e0208857, 2018. 2.766 2018
551 B. Javed, A. K. Khan, S. Arjoon, M. Mashkoor, and A. u. Haque, “Openness to experience, ethical leadership, and innovative work behavior,” The Journal of Creative Behavior, 2018. 1.615 2018
552 M. B. Saeed, M. M. Iqbal, and K. S. Syed, “Corporate governance mechanisms and conservatism; evidence from Pakistan,” NICE Research Journal of Social Sciences, vol. 11, pp. 18–38, 2018. 2018
553 A. Khan and S. M. M. R. Naqvi, “The impact of internalized stigma at workplace through interlinking mechanism of self-esteem of tuberculosis patients in Pakistan,” Journal of Managerial Sciences, vol. 9, pp. 323–342, 2018 2018
554 Q. Hayat and S. M. M. R. Naqvi, “Job strain, employee greed, and employee envy: Moderating role of self-monitoring in the banking sector of Pakistan,” Journal of Managerial Sciences, vol. 9, pp. 221–224, 2018. 2018
555 B. Javed, M. Y. A. Rawwas, S. Khandai, K. Shahid, and H. H. Tayyeb, “Ethical leadership, trust in leader and creativity: The mediated mechanism and an interacting effect,” Journal of Management & Organization, pp. 1–18, 2018. 1.159 2018
556 J. Ahmed and M. Mughal, “They earn and send; we spend: Consumption patterns of Pakistani migrant households,” International Journal of Social Economics, vol. 45, no. 7, pp. 1092–1108, 2018. 2018
557 S. Rizwan, J. Ahmed, and R. Rasiah, “The devil made me do it: Environmental factors leading to corporate financial fraud,” Journal of Managerial Sciences, vol. 11, no. 03, pp. 321–353, 2018. 2018
558 S. Fatima and M. A. Zafar, “Servant leadership and meaningfulness at work: The contingency effect of leader ethical sensitivity,” Pakistan Journal of Social Sciences, vol. 38, no. 1, 2018. 2018
559 M. Khalid, S. Bashir, A. K. Khan, and N. Abbas, “When and how abusive supervision leads to knowledge hiding behaviors: An islamic work ethics perspective,” Leadership & Organization Development Journal, vol. 39, no. 6, pp. 794–806, 2018. 1.067 2018
560 S. A. Khattak and S. Bashir, “Evaluation of union commitment in public sector organi¬zations of pakistan: A time lagged study.,” Abasyn University Journal of Social Sciences, vol. 11, no. 1, 2018. 2018
561 A. Majeed and S. Ahmed, “Do board audit and cultural dynamics affect firm performance? evidence from karachi meezan index,” Journal of Islamic Business and Management, vol. 8, no. 2, 2018. 2018
562 N. Fatima, F. Aziz, Z. Ahmad, M. A. Najeeb, M. I. Azmeer, K. S. Karimov, M. M. Ahmed, S. Basheer, R. A. Shakoor, and K. Sulaiman, “Compositional engineering of the pi-conjugated small molecular VOPcPhO: Alq3 complex to boost humidity sens­ing,” RSC Advances, vol. 7, no. 32, pp. 19 780–19 786, 2017. 3.108 2017
563 Q. Zafar, N. Fatima, K. S. Karimov, M. M. Ahmed, and K. Sulaiman, “Realizing broad-bandwidth visible wavelength photodiode based on solution-processed ZnPc/PC71BM dyad,” Optical Materials, vol. 64, pp. 131–136, 2017. 2.235 2017
564 K. S. Karimov, Z. Ahmad, N. Fatima, M. M. Ahmed, and M. Abid, “Effect of humidity on copper phthalocyanine films deposited at different gravity conditions,” Pigment & Resin Technology, vol. 46, no. 1, pp. 64–70, 2017. 0.67 2017
565 K. S. Karimov, M. H. Sayyad, M. M. Ahmed, M. N. Khan, Z. M. Karieva, S. A. Moiz, M. Shah, K. h. Zakaullah, and M. A. Turaeva, “Effect of temperature and humid­ity on electrical properties of organic orange dye complex films,” Eurasian Chemico-Technological Journal, vol. 6, no. 2, pp. 145–149, 2017. 2017
566 S. U. Rahman, Q. CAO, M. M. Ahmed, and H. Khalil, “Analysis of linear antenna array for minimum side lobe level, half power beamwidth, and nulls control using PSO,” Jour­nal of Microwaves, Optoelectronics and Electromagnetic Applications, vol. 16, no. 2, pp. 577–591, 2017. 2017
567 N. Fatima, M. M. Ahmed, K. S. Karimov, Z. Ahmad, and F. F. Muhammad, “Optical sensors based on the NiPc CoPc composite films deposited by drop casting and under the action of centrifugal force,” Chinese Physics B, vol. 26, no. 6, 2017. 1.223 2017
568 M. M. Ahmed, M. Riaz, and U. F. Ahmed, “An improved model for the I − V char­acteristics of submicron SiC MESFETs by evaluating the potential distribution inside the channel,” Journal of Computational Electronics, vol. 16, no. 3, pp. 1–12, 2017. 1.562 2017
569 N. Fatima, M. M. Ahmed, and K. S. Karimov, “Effects of humidity and temperature on orange dye-based organic field effect transistors fabricated at different gravity,” Journal of Electronic Materials, vol. 46, no. 11, pp. 6588–6594, 2017. 1.579 2017
570 J. S. Malik, U. Rafique, S. A. Ali, and M. A. Khan, “Novel patch antenna for multiband cellular, WiMAX, and WLAN applications,” Turkish Journal of Electrical Engineering and Computer Sciences, vol. 25, no. 3, pp. 2005–2014, 2017. 0.58 2017
571 K. Majeed, Z. Masood, R. Samar, and M. A. Z. Raja, “A genetic algorithm optimized Morlet wavelet artificial neural network to study the dynamics of nonlinear troesch’s system,” Applied Soft Computing, vol. 56, pp. 420–435, 2017. 3.541 2017
572 S. M. Shah, R. Samar, N. M. Khan, and M. A. Z. Raja, “Design of fractional-order variants of complex LMS and NLMS algorithms for adaptive channel equalization,” Nonlinear Dynamics, vol. 88, no. 2, pp. 839–858, 2017. 3.464 2017
573 Z. Masood, K. Majeed, R. Samar, and M. A. Z. Raja, “Design of Mexican Hat Wavelet neural networks for solving Bratu type nonlinear systems,” Neurocomputing, vol. 221, pp. 1–14, 2017. 3.317 2017
574 M. A. Z. Raja, R. Samar, M. A. Manzar, and S. M. Shah, “Design of unsupervised fractional neural network model optimized with interior point algorithm for solving Bagley–Torvik equation,” Mathematics and Computers in Simulation, vol. 132, pp. 139–158, 2017. 1.218 2017
575 F. Khattak, M. Haseeb, S. Fazal, A. I. Bhatti, and M. Ullah, “Mathematical modeling of E6-p53 interactions in cervical cancer,” Asian Pacific Journal of Cancer Prevention, vol. 18, no. 4, pp. 1057–1061, 2017. 1.24 2017
576 A. A. Uppal, Y. M. Alsmadi, V. I. Utkin, A. I. Bhatti, and S. A. Khan, “Sliding mode control of underground coal gasification energy conversion process,” IEEE Transactions on Control Systems Technology, vol. 26, no. 2, pp. 587–598, 2017. 3.992 2017
577 M. Haseeb, S. Azam, A. I. Bhatti, R. Azam, M. Ullah, and S. Fazal, “On p53 revival using system oriented drug dosage design,” Journal of Theoretical Biology, vol. 415, pp. 53–57, 2017. 2.133 2017
578 A. Yar, A. I. Bhatti, and Q. Ahmed, “First principle-based control oriented model of a gasoline engine,” Journal of Dynamic Systems, Measurement, and Control, vol. 139, no. 5, pp. 1–14, 2017. 1.355 2017
579 Q. Khan, R. Akmeliawati, A. I. Bhatti, and M. A. Khan, “Robust stabilization of underactuated nonlinear systems: A fast terminal sliding mode approach,” ISA Trans­actions, vol. 66, pp. 241–248, 2017. 3.394 2017
580 S. A. Tariq, S. Iqbal, M. Ghafoor, I. A. Taj, N. M. Jafri, S. Razzaq, and T. Zia, “Massively parallel palmprint identification system using GPU,” Cluster Computing, pp. 1–16, 2017. 2.04 2017
581 Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Cut locus and optimal synthesis in sub-Riemannian problem on the lie group SH(2),” Journal of Dynamical and Control Systems, vol. 23, no. 1, pp. 155–195, 2017. 0.708 2017
582 K. A. Khaliq, A. Qayyum, and J. Pannek, “Performance analysis of proposed conges­tion avoiding protocol for IEEE 802.11s,” International Journal of Advanced Computer Science and Applications, vol. 8, no. 2, pp. 356–369, 2017. 2017
583 S. Yasmin, A. Qayyum, and R. N. B. Rais, “Cooperation in opportunistic networks: An overlay approach for destination-dependent utility-based schemes,” Arabian Journal for Science and Engineering, vol. 42, no. 2, pp. 467–482, 2017. 2017
584 S. Din, Q. Khan, F. Rehman, and R. Akmeliawanti, “A comparative experimental study of robust sliding mode control strategies for underactuated systems,” IEEE Ac­cess, 2017. 3.244 2017
585 H. Raza and N. M. Khan, “Low complexity linear channel estimation for MIMO com­munication systems,” Wireless Personal Communications, pp. 1–14, 2017. 0.951 2017
586 N. M. Khan and H. Raza, “Processing-efficient distributed adaptive RLS filtering for computationally constrained platforms,” Wireless Communications and Mobile Com­puting, vol. 2017, 2017. 1.899 2017
587 G. Ahmed and N. M. Khan, “Adaptive power-control based energy-efficient routing in wireless sensor networks,” Wireless Personal Communications, vol. 94, no. 3, pp. 1297–1329, 2017. 0.951 2017
588 M.-Y. M. Mirza, G. Ahmed, and N. M. Khan, “Model-based adaptive transmission power control (MATPoC) for wireless sensor networks in fading environment,” Journal of Circuits, Systems and Computers, vol. 26, no. 09, pp. 1–34, 2017. 0.481 2017
589 A. A. Awan, H. Ishtiaq, and M. Hassan, “Optimizing lining length of watercourses for increased water saving in Punjab, Pakistan,” Journal of Biodiversity and Environmen­tal Sciences (JBES), vol. 10, no. 2, pp. 173–180, 2017. 2017
590 I. Hassan, A. R. Ghumman, Y. Ghazaw, R. H. Abdel-Maguid, and B. Samreen, “Cli­mate change impact on precipitation in arid areas of Pakistan,” International Journal of Water Resources and Arid Environments, vol. 6, no. 1, pp. 80–88, 2017. 2017
591 M. Ahmed, “No access fluid viscous dampers locations in reinforced-concrete core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, vol. 170, no. 1, pp. 33–50, 2017. 0.424 2017
592 M. Ali, “Role of post-tensioned Coconut-fibre ropes in mortar-free interlocking concrete construction during seismic loadings,” KSCE Journal of Civil Engineering, pp. 1–8, 2017. 0.818 2017
593 T. Mehmood, P. Warnitchai, M. Ahmed, and M. I. Qureshi, “Alternative approach to compute shear amplification in high-rise reinforced concrete core wall buildings using uncoupled modal response history analysis procedure,” The Structural Design of Tall and Special Buildings, vol. 26, no. 4, 2017. 1.195 2017
594 J. Iqbal, Z. H. Khan, and A. Khalid, “Prospects of robotics in food industry,” Food Science and Technology (Campinas), vol. 37, no. 2, pp. 159–165, 2017. 1.64 2017
595 S. S. Warsi, S. H. I. Jaffery, R. Ahmad, M. Khan, L. Ali, M. H. Agha, and S. Akram, “Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 1–13, 2017. 1.366 2017
596 A. Ashfaq, Z. H. Kamali, M. H. Agha, and H. Arshid, “Heat coupling of the pan-European vs. regional electrical grid with excess renewable energy,” Energy, vol. 122, pp. 363–377, 2017. 1.772 2017
597 M. M. Khan, J. H´elie, M. Gorokhovski, and N. A. Sheikh, “Experimental and numerical study of flash boiling in gasoline direct injection sprays,” Applied Thermal Engineering, vol. 123, pp. 377–389, 2017. 3.356 2017
598 M. M. Khan, J. H´elie, M. Gorokhovski, and N. A. Sheikh, “Air entrainment in high pressure multihole gasoline direct injection sprays,” Journal of Applied Fluid Mechanics, vol. 10, no. 4, pp. 1223–1234, 2017. 2017
599 M. R. Bhatti, N. A. Sheikh, S. Manzoor, M. M. Khan, and M. Ali, “Numerical study of hydrogen peroxide thermal decomposition in a shock tube,” Journal of Thermal Science, vol. 26, no. 3, pp. 235–244, 2017. 2017
600 M. M. Khan and N. A. Sheikh, “Experimental characterization of high pressure gasoline direct injection sprays,” Journal of Mechanical Science and Technology, vol. 31, no. 4, pp. 2015–2022, 2017. 1.128 2017
601 M. Ahmad, M. A. Qadir, and T. Ali, “Indexing for semantic cache to reduce query matching complexity,” Journal of the National Science Foundation of Sri Lanka, vol. 45, no. 1, 2017. 0.42 2017
602 S. Khan and M. A. Qadir, “Deterministic time markov chain modeling of simultaneous multipath transmission schemes,” IEEE Access, vol. 5, 2017. 3.244 2017
603 N. Noureen, H. M. Zohaib, M. A. Qadir, and S. Fazal, “ChromBiSim: Interactive chromatin biclustering using a simple approach,” Genomics, 2017. 3.27 2017
604 R. Ahmad, M. T. Afzal, and M. A. Qadir, “Pattern analysis of citation-anchors in citing documents for accurate identification of in-text citations,” IEEE Access, vol. 5, pp. 5819–5828, 2017. 3.244 2017
605 N. Ikram, M. Qadir, and M. Afzal, “Investigating correlation between protein sequence similarity and semantic similarity using gene ontology annotations,” IEEE/ACM Transactions on Computational Biology and Bioinformatics, 2017. 1.955 2017
606 A. Shahid and M. T. Afzal, “Section-wise indexing and retrieval of research articles,” Cluster Computing, pp. 1–12, 2017. 2.04 2017
607 S. A. Khan, M. A. Qadir, M. A. Abbas, and M. T. Afzal, “OWL2 benchmarking for the evaluation of knowledge based systems,” PloS One, vol. 12, no. 6, p. e0179578, 2017. 2.806 2017
608 R. Habib and M. T. Afzal, “Paper recommendation using citation proximity in bibli­ographic coupling,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 25, no. 4, pp. 2708–2718, 2017. 0.578 2017
609 M. Imran, M. T. Afzal, and M. A. Qadir, “A comparison of feature extraction tech­niques for malware analysis,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 25, no. 2, pp. 1173–1183, 2017. 0.578 2017
610 M. A. Iqbal, M. Aleem, M. Ibrahim, A. Saleem, and M. A. Islam, “Amazon cloud computing platform EC2 and VANET simulations,” accepted in International Journal of Ad hoc and Ubiquitous Computing (Inderscience), 2017. 0.705 2017
611 M. Aleem, P. Radu, M. A. Islam, and M. A. Iqbal, “On the parallel programmability of JavaSymphony for multi-cores and clusters,” accepted in International Journal of Ad hoc and Ubiquitous Computing, 2017. 0.705 2017
612 S. Aurangzeb, M. Aleem, M. A. Iqbal, and M. A. Islam, “Ransomware: A survey and trends.” Journal of Information Assurance & Security, vol. 6, no. 2, 2017. 2017
613 M. Badri, M. Aleem, M. Arshad Islam, M. A. Iqbal, and M. Waqar, “Fast imple­mentation of minimum spanning tree method and applying it to kruskal’s and prim’s algorithms,” Sukkur IBA Journal of Computing and Mathematical Sciences, vol. 1, no. 1, pp. 58–66, 2017. 2017
614 M. Aleem, A. Ishtiaq, S. H. Abbasi, and M. A. Islam, “User tracking mechanisms and counter measures,” International Journal of Applied Mathematics, Electronics and Computers, vol. 5, no. 2, pp. 33–40, 2017. 2017
615 Z. Halim, A. R. Baig, G. Abbas, and M. A. Islam, “Computational intelligence-based search of entertaining rules in the space of predator/prey games,” Journal of Multiple-Valued Logic & Soft Computing, vol. 28, no. 6, 2017. 0.365 2017
616 S. A. Khan and A. Nadeem, “Automated generation and infeasible detection of test paths for data flow testing using genetic algorithm,” Science International, vol. 29, no. 2, pp. 311–311, 2017. 1.365 2017
617 M. N. Shahwani, S. Nisar, A. Aleem, M. Panezai, S. Afridi, and S. I. Malik, “Ampli­fication of mitochondrial DNA for detection of plasmodiumvivax in Balochistan,” The Journal of the Pakistan Medical Association, vol. 67, no. 5, p. 677, 2017. 0.616 2017
618 A. Munir, S. Azam, S. Ali, A. Mehmood, A. H. Shah et al., “Repurposing of modified alpidem and propoxyphene to cure AURKA, BCAS1, GNAS and MLH1 gene mutations in colorectal cancer,” Drug Designing, vol. 6, no. 141, pp. 2169–0138, 2017. 2017
619 F. Khattak, M. Haseeb, S. Fazal, A. I. Bhatti, and M. Ullah, “Mathematical modeling of E6-p53 interactions in cervical cancer,” Asian Pacific Journal of Cancer Prevention, vol. 18, no. 4, p. 1057, 2017. 1.24 2017
620 A. Saeed, P. A. Channar, F. A. Larik, F. Jabeen, U. Muqadar, S. Saeed, U. Florke, H. Ismail, E. Dilshad, and B. Mirza, “Design, synthesis, molecular docking studies of organotin-drug derivatives as multi-target agents against antibacterial, antifungal, α­amylase, α-glucosidase and butyrylcholinesterase,” Inorganica Chimica Acta, vol. 464, pp. 204–213, 2017. 2.002 2017
621 S. Azam, A. Munir, M. S. Khan, S. Fazal, A. Mehmood et al., “In-silico identification of novel resistant genes for fungal pathogen fusarium oxysporum f.sp. cubense race 4: Causative agent of banana vascular wilt disease,” Journal Of Plant Biochemistry & Physiology, vol. 5, no. 175, p. 2, 2017. 2017
622 S. Hussain, J. Z. K. Khattak, M. Ismail, Q. Mansoor, and M. H. Khan, “Molecular characterization of deafness in autosomal recessive pedigrees of Khyber Pakhtunkhwa,” Pakistan Journal of Pharmaceutical Sciences, vol. 31, no. 1, 2017. 0.649 2017
623 H. Ismail, E. Dilshad, M. T. Waheed, and B. Mirza, “Transformation of Lettuce with rol ABC Genes: Extracts show enhanced antioxidant, analgesic, anti-Inflammatory, an­tidepressant, and anticoagulant activities in aats,” Applied Biochemistry and Biotech­nology, vol. 181, no. 3, pp. 1179–1198, 2017. 1.751 2017
624 S. Hussain, “Finite element solution for MHD flow of nanofluids with heat and mass transfer through a porous media with thermal radiation, viscous dissipation and chem­ical reaction effects,” Advances in Applied Mathematics and Mechanics, vol. 9, no. 4, pp. 904–923, 2017. 0.763 2017
625 Y. Mehmood, M. Sagheer, and S. Hussain, “MHD oblique stagnation point flow of nanofluid over a convective stretching surface,” Journal of Computational and Theo­retical Nanoscience, vol. 14, no. 4, pp. 1724–1734, 2017. 1.666 2017
626 S. Hussain, S. Ahmad, K. Mehmood, and M. Sagheer, “Effects of inclination angle on mixed convective nanofluid flow in a double lid-driven cavity with discrete heat sources,” International Journal of Heat and Mass Transfer, vol. 106, pp. 847–860, 2017. 3.453 2017
627 Y. Mehmood, M. Sagheer, S. Hussain, and M. Bilal, “MHD stagnation point flow and heat transfer in viscoelastic fluid with cattaneo–christov heat flux model,” Neural Computing and Applications, pp. 1–8, 2017. 2.525 2017
628 M. Bilal, M. Sagheer, and S. Hussain, “Three dimensional MHD upper-convected maxwell nanofluid flow with nonlinear radiative heat flux,” Alexandria Engineering Journal, 2017. 2017
629 M. Bilal, M. Sagheer, S. Hussain, and Y. Mehmood, “MHD stagnation point flow of williamson fluid over a stretching cylinder with variable thermal conductivity and ho­mogeneous/heterogeneous reaction,” Communications in Theoretical Physics, vol. 67, no. 6, p. 688, 2017. 0.989 2017
630 M. Bilal, S. Hussain, and M. Sagheer, “Boundary layer flow of magneto-micropolar nanofluid flow with hall and ion-slip effects using variable thermal diffusivity,” Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 65, no. 3, pp. 383–390, 2017. 1.156 2017
631 K. Mehmood, S. Hussain, and M. Sagheer, “Mixed convection in alumina-water nanofluid filled lid-driven square cavity with an isothermally heated square blockage inside with magnetic field effect: Introduction,” International Journal of Heat and Mass Transfer, vol. 109, pp. 397–409, 2017. 3.458 2017
632 K. Mehmood, S. Hussain, and M. Sagheer, “Numerical simulation of MHD mixed convection in alumina–water nanofluid filled square porous cavity using KKL model: Effects of non-linear thermal radiation and inclined magnetic field,” Journal of Molecular Liquids, vol. 238, pp. 485–498, 2017. 3.648 2017
633 M. Bilal, M. Sagheer, and S. Hussain, “On MHD 3D upper convected maxwell fluid flow with thermophoretic effect using non-linear radiative heat flux,” Canadian Journal of Physics, 2017. 0.877 2017
634 S. Hussain, S. E. Ahmed, and T. Akbar, “Entropy generation analysis in MHD mixed convection of hybrid nanofluid in an open cavity with a horizontal channel containing an adiabatic obstacle,” International Journal of Heat and Mass Transfer, vol. 114, pp. 1054–1066, 2017. 3.453 2017
635 S. Hussain, H. F. Oztop, M. Jamal, and N. A. Hamdeh, “Double diffusive nanofluid flow in a duct with cavity heated from below,” International Journal of Mechanical Sciences, vol. 131, pp. 535–545, 2017. 2.884 2017
636 A. Kamran, S. Hussain, M. Sagheer, and N. Akmal, “A numerical study of magnetohy­drodynamics flow in casson nanofluid combined with joule heating and slip boundary conditions,” Results in Physics, vol. 7, pp. 3037–3048, 2017. 0.946 2017
637 J. B. Lawrie and M. Afzal, “Acoustic scattering in a waveguide with a height disconti­nuity bridged by a membrane: A tailored galerkin approach,” Journal of Engineering Mathematics, vol. 105, no. 1, pp. 99–115, 2017. 1.076 2017
638 J. Ahmed, “Does external debt lead to growth in the presence of quality institutions?” World Economy Brief, vol. 7, no. 22, pp. 1–5, 2017. 2017
639 N. Kanwal, M. S. Zafar, and S. Bashir, “The combined effects of managerial control, resource commitment, and top management support on the successful delivery of in­formation systems projects,” International Journal of Project Management, vol. 35, no. 8, pp. 1459–1465, 2017. 4.034 2017
640 S. Shaheen, S. Bashir, and A. K. Khan, “Examining organizational cronyism as an antecedent of workplace deviance in public sector organizations,” Public Personnel Management, vol. 46, no. 3, pp. 308–323, 2017. 0.981 2017
641 M. M. Hassan, S. Bashir, and S. M. Abbas, “The impact of project managers person­ality on project success in NGOs: The mediating role of transformational leadership,” Project Management Journal, vol. 48, no. 2, pp. 74–87, 2017. 2.714 2017
642 B. Javed, A. A. Khan, S. Bashir, and S. Arjoon, “Impact of ethical leadership on creativity: the role of psychological empowerment,” Current Issues in Tourism, vol. 20, no. 8, pp. 839–851, 2017. 2.451 2017
643 B. Javed, S. Bashir, M. Y. A. Rawwas, and S. Arjoon, “Islamic work ethic, inno­vative work behaviour, and adaptive performance: the mediating mechanism and an interacting effect,” Current Issues in Tourism, vol. 20, no. 6, pp. 647–663, 2017. 2.451 2017
644 I. Rasool, A. Rajput et al., “The impact of perceived internal corporate social responsi­bility on organizational citizenship behavior: A micro-perspective analysis,” Business & Economic Review, vol. 9, no. 1, pp. 181–201, 2017. 2017
645 A. U. Shah and M. I. Khan, “The mediating role of overall justice in justice employees attitudes relationship: A test of five factors mode,” Journal of Managerial Science, vol. 10, no. 3, pp. 27–48, 2017. 3.962 2017
646 I. Ahmad and M. A. Zafar, “Impact of psychological contract fulfillment on orga­nizational citizenship behavior: Mediating role of perceived organizational support,” International Journal of Contemporary Hospitality Management, vol. 30, no. 2, pp. 1001–1015, 2017. 2.874 2017
647 L. Saqib and M. A. Zafar, “A critical analysis of shari’ah issues in the contemporary state bank guidelines on islamic agriculture finance (a study from Pakistan),” Islamic Studies, vol. 54, no. 1-2, 2017. 2017
648 B. Javed, S. M. M. R. Naqvi, A. K. Khan, S. Arjoon, and H. H. Tayyeb, “Impact of inclusive leadership on innovative work behavior: The role of psychological safety,” Journal of Management & Organization, pp. 1–20, 2017. 0.539 2017
649 B. Shabbir and S. M. M. Raza Naqvi, “Impact of workload and job complexity on employee job performance with the moderating role of social support and mediating role of job stress: A study of travel agencies in Rawalpindi, Islamabad and AJK,” Journal of Accounting and Marketing, vol. 6, no. 1, 2017. 0.139 2017
650 Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Maxwell strata and conjugate points in the sub-Riemannian problem on the lie group SH(2),” Journal of Dynamical and Control Systems, vol. 22, no. 4, pp. 747–770, 2016. 0.708 2016
651 M. Ghafoor, I. A. Taj, and M. N. Jafri, “Fingerprint frequency normalisation and enhancement using two-dimensional short-time fourier transform analysis,” IET Com­puter Vision, vol. 10, no. 8, pp. 806–816, 2016. 0.573 2016
652 G. Murtaza, A. I. Bhatti, and Q. Ahmed, “Control-oriented model of atkinson cycle en­gine with variable intake valve actuation,” Journal of Dynamic Systems, Measurement, and Control, vol. 138, no. 6, pp. 1–9, 2016. 1.339 2016
653 I. Khan, A. I. Bhatti, A. Arshad, and Q. Khan, “Robustness and performance pa­rameterization of smooth second order sliding mode control,” International Journal of Control, Automation and Systems, vol. 14, no. 3, pp. 681–690, 2016. 1.687 2016
654 S. U. Ali, R. Samar, M. Z. Shah, A. I. Bhatti, K. Munawar, and U. M. Al-Sggaf, “Lateral guidance and control of UAVs using second-order sliding modes,” Aerospace Science and Technology, vol. 49, pp. 88–100, 2016. 2.57 2016
655 M. A. Z. Raja, R. Samar, E. S. Alaidarous, and E. Shivanian, “Bio-inspired comput­ing platform for reliable solution of Bratu-type equations arising in the modeling of electrically conducting solids,” Applied Mathematical Modelling, vol. 40, no. 11, pp. 5964–5977, 2016. 2.291 2016
656 S. J. Nawaz, M. I. Tiwana, M. Patwary, N. M. Khan, M. I. Tiwana, and A. H. Haseeb, “GA based sensing of sparse multipath channels with superimposed training sequence,” Elektronika ir Elektrotechnika, vol. 22, no. 1, pp. 87–91, 2016. 0.859 2016
657 S. M. Shah, R. Samar, N. M. Khan, and M. A. Z. Raja, “Fractional-order adaptive signal processing strategies for active noise control systems,” Nonlinear Dynamics, vol. 85, no. 3, pp. 1363–1376, 2016. 3.464 2016
658 M. Y. Wani, M. Riaz, and N. M. Khan, “Modeling and characterization of MIMO mobile-to-mobile communication channels using elliptical scattering geometry,” Wire­less Personal Communications, vol. 91, no. 2, pp. 509–524, 2016. 0.951 2016
659 M. S. Khan and N. M. Khan, “Low complexity signed response based sybil attack detection mechanism in wireless sensor networks,” Journal of Sensors, vol. 2016, 2016. 1.734 2016
660 T. Ahmed and N. M. Khan, “Direct radio frequency sampling methodology for multiple signals in an energy-sparse spectrum,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 24, no. 6, pp. 4637–4647, 2016. 0.578 2016
661 M. Riaz, M. Rehan, and M. Ashraf, “Synchronization of nonlinear master–slave systems under input delay and slope-restricted input nonlinearity,” Complexity, vol. 21, no. S1, pp. 220–233, 2016. 4.621 2016
662 S. J. Nawaz, N. M. Khan, and R. Ramer, “3-D spatial spread quantifiers for multipath fading wireless channels,” IEEE Wireless Communications Letters, vol. 5, no. 5, pp. 484–487, 2016. 2.449 2016
663 M. Sajid, I. A. Taj, U. I. Bajwa, and N. I. Ratyal, “The role of facial asymmetry in recognizing age-separated face images,” Computers & Electrical Engineering, vol. 54, pp. 255–270, 2016. 1.57 2016
664 M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and A. Raza, “An efficient inter pre­diction mode selection scheme for advanced video coding based on motion homogeneity and residual complexity,” IEEJ Transactions on Electrical and Electronic Engineering, vol. 11, no. 6, pp. 760–767, 2016. 0.517 2016
665 W. Abbasi et al., “Adaptive integral sliding mode stabilization of nonholonomic drift-free systems,” Mathematical Problems in Engineering, vol. 2016, 2016. 0.802 2016
666 Q. Khan, R. Akmeliawati et al., “Robust control of underactuated systems: Higher order integral sliding mode approach,” Mathematical Problems in Engineering, vol. 2016, 2016. 2016
667 K. A. Khaliq, A. Qayyum, and J. Pannek, “Synergies of advanced technologies and role of VANET in logistics and transportation,” International Journal of Advanced Computer Science and Applications, vol. 7, no. 11, pp. 359–369, 2016. 2016
668 S. Yasmin, R. N. Bin Rais, and A. Qayyum, “Resource aware routing in heterogeneous opportunistic networks,” International Journal of Distributed Sensor Networks, vol. 12, no. 1, p. 2907980, 2016. 1.239 2016
669 K. A. Khaliq, A. Qayyum, J. Pannek et al., “Wireless body area networks (WBAN): Architecture, applications and MAC protocols,” Abstract of Emerging Trends in Sci­entific Research, vol. 6, 2016. 2016
670 M. Riaz, M. M. Ahmed, and U. Munir, “An improved model for current voltage char­acteristics of submicron SiC MESFETs,” Solid-State Electronics, vol. 121, pp. 54–61, 2016. 1.58 2016
671 M. Ahmed, “No access multiple plastic hinge concept for high-rise reinforced-concrete core wall buildings,” Proceedings of the Institution of Civil Engineers-Structures and Buildings, vol. 169, no. 9, pp. 688–701, 2016. 0.424 2016
672 R. Farooq, W. Ahmad, H. N. Hashmi, and Z. Saeed, “Computation of momentum transfer coefficient and conveyance capacity in asymmetric compound channel,” Ara­bian Journal for Science and Engineering, vol. 41, no. 10, pp. 4225–4234, 2016. 2016
673 M. Khan and M. Ali, “Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks,” Construction and Building Materials, vol. 125, pp. 800–808, 2016. 3.169 2016
674 M. Ali, “Use of coconut fibre reinforced concrete and coconut-fibre ropes for seismic-resistant construction,” Materiales de Construcci´on, vol. 66, no. 321, p. e073, 2016. 1.343 2016
675 I. Hassan, “Rainwater harvesting-an alternative water supply in the future for Pak­istan,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 8, no. 6, pp. 213–222, 2016. 2.678 2016
676 I. Hassan, A. R. Ghumman, and H. N. Hashmi, “Global warming and tempera­ture changes for Saudi Arabia,” Journal of Biodiversity and Environmental Sciences (JBES), vol. 8, no. 1, pp. 179–191, 2016. 2016
677 A. Khalid, P. Kirisci, Z. Ghrairi, K.-D. Thoben, and J. Pannek, “A methodology to develop collaborative robotic cyber physical systems for production environments,” Logistics Research, vol. 9, no. 23, pp. 1–15, 2016. 2016
678 M. Umar, N. Khan, M. H. Agha, and M. Abbas, “SAP-ERP implementation: Change management model using qualitative approach,” International Journal of Computer Science and Network Security (IJCSNS), vol. 16, no. 6, pp. 9–13, 2016. 2016
679 L. A. K. Rayyan Azam Khan, Z. K. Farzan Majeed Noori, and A. Majeed, “Design and simulation of a sine wave inverter with PID control for nonlinear load applications,” International Journal of Innovation and Scientific Research, vol. 26, no. 2, pp. 672–683, 2016. 3.917 2016
680 R. A. K. Farzan Majeed Noori, Liaquat Ali Khan, “Cost effective recognition and classification of moving objects using simulink,” Journal of Scientific and Engineering Research, vol. 3, no. 5, pp. 174–182, 2016. 2016
681 M. M. Khan and N. A. Sheikh, “Identification and characterization of coherent struc­tures in gasoline injector nozzle flow using proper orthogonal decomposition,” Journal of Mechanical Science and Technology, vol. 30, no. 8, pp. 3673–3680, 2016. 1.128 2016
682 N. A. Sheikh, S. Manzoor, M. M. Khan, and M. Ali, “Hydrodynamic description of a vibrofluidized granular bed driven at high frequency,” The European Physical Journal Applied Physics, vol. 75, no. 3, p. 31101, 2016. 0.684 2016
683 U. Farooq, A. Nongaillard, Y. Ouzrout, and M. A. Qadir, “A feature-based reputation model for product evaluation,” International Journal of Information Technology & Decision Making, vol. 15, no. 06, pp. 1521–1553, 2016. 1.406 2016
684 U. Farooq, A. Nongaillard, Y. Ouzrout, and M. A. Qadir, “A multi source product reputation model,” Computers in Industry, vol. 83, pp. 55–67, 2016. 2.691 2016
685 K. Shaukat, T. Tariq, A. Junaid, M. A. Ahsan, K. Mehmood, and U. Shaukat, “KSD an efficient algorithm for association rule mining,” International Journal of Computer Science and Information Security, vol. 14, no. 5, p. 351, 2016. 2016
686 S. Ayaz and M. T. Afzal, “Identification of conversion factor for completing-h index for the field of mathematics,” Scientometrics, vol. 109, no. 3, pp. 1511–1524, 2016. 2.147 2016
687 M. Imran, M. T. Afzal, and M. A. Qadir, “Malware classification using dynamic fea­tures and hidden markov model,” Journal of Intelligent & Fuzzy Systems, vol. 31, no. 2, pp. 837–847, 2016. 1.261 2016
688 N. Sajid, M. T. Afzal, and M. Qadir, “Multi-label classification of computer science documents using fuzzy logic,” Journal of the National Science Foundation of Sri Lanka, vol. 44, no. 2, 2016. 0.42 2016
689 M. T. Ikram, N. A. Butt, and M. T. Afzal, “Open source software adoption evalua­tion through feature level sentiment analysis using Twitter data,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 24, no. 5, pp. 4481–4496, 2016. 0.578 2016
690 M. Aleem, M. A. Islam, and M. A. Iqbal, “A comparative study of heterogeneous processor simulators,” International Journal of Computer Applications, vol. 148, no. 12, 2016. 3.12 2016
691 A. Javed, B. Qamar, M. Jameel, A. Shafi, and B. Carpenter, “Towards scalable Java HPC with hybrid and native communication devices in MPJ express,” International Journal of Parallel Programming, vol. 44, no. 6, pp. 1142–1172, 2016. 1.156 2016
692 R. Ul-Islam, S. A. Haider, T. Abbas, and M. Ikram, “Matter-wave teleportation via cavity-field trans-pads,” Laser Physics Letters, vol. 13, no. 10, p. 105204, 2016. 2.537 2016
693 S. Ahmed and A. Nadeem, “A mobile agent based communication protocol to optimize message delivery cost,” Journal of Systems and Software, vol. 121, pp. 40–48, 2016. 2.444 2016
694 R. Bano, M. Ismail, A. Nadeem, M. H. Khan, and H. Rashid, “Potential risk factors for breast cancer in Pakistani women,” Asian Pacific Journal of Cancer Prevention, vol. 17, no. 9, pp. 4307–4312, 2016. 1.24 2016
695 S. A. Khan and A. Nadeem, “An empirical investigation on test data generation for coupling based integration testing,” Science International, vol. 28, no. 1, 2016. 1.365 2016
696 N. Farah, A. Mehdi, S. I. Soomro, N. I. Soomro, R. Tareb, N. Desmasures, J. P. Vernoux, S. M. Bakhtiar, and M. Imran, “Draft genome sequence of enterococcus mundtii QAUEM2808, isolated from dahi, a fermented milk product,” Genome an­nouncements, vol. 4, no. 5, pp. e00 995–16, 2016. 2016
697 R. Tabassum, M. Haseeb, and S. Fazal, “Structure prediction of outer membrane pro-tease protein of salmonella typhimurium using computational techniques,” Interna­tional Journal Bioautomation, vol. 20, no. 1, 2016. 2016
698 N. Farah, A. Mehdi, S. I. Soomro, N. I. Soomro, R. Tareb, N. Desmasures, J. P. Vernoux, S. M. Bakhtiar, and M. Imran, “Implementation of mathematical models for HCV infection,” Journal of Applied Environmental and Biological Sciences, vol. 6, no. 2S, pp. 109–113, 2016. 2016
699 H. A. Butt and S. M. Bakhtiar, “Identification and classification of bacterial auto-transporters,” Jurnal Teknologi, vol. 78, no. 4-3, pp. 47–51, 2016. 2016
700 H. Ismail, E. Dilshad, M. T. Waheed, M. Sajid, W. K. Kayani, and B. Mirza, “Transfor­mation of Lactuca sativa L. with rol C gene results in increased antioxidant potential and enhanced analgesic, anti-inflammatory and antidepressant activities in vivo,” 3 Biotech, vol. 6, no. 2, p. 215, 2016. 1.361 2016
701 W. K. Kayani, E. Dilshad, T. Ahmed, H. Ismail, and B. Mirza, “Evaluation of Ajuga bracteosa for antioxidant, anti-inflammatory, analgesic, antidepressant and anticoagu­lant activities,” BMC Complementary and Alternative Medicine, vol. 16, no. 1, p. 375, 2016. 2.288 2016
702 S. F. Ahmad, Z. Anwar, S. Hussain, M. Jehangir, I. Jehangir, A. Jamal, J. Z. K. Khattak, and A. Ali Khan, “A detailed report on the specific area based percentage and diagnostic methods of hepatitis C in Khyber Pakhtunkhwa, Pakistan,” Molecular and Biochemical Diagnosis (Journal), vol. 2, no. 1, pp. 51–64, 2016. 2016
703 K. M. Haroon, S. Hussain, R. Bano, H. Jamshed-Ul-Hassan, and U. R. M. Aadil, “Associations of most prevalent risk factors with lung cancer and their impact on survival length,” Asian Pacific Journal of Cancer Prevention, vol. 17, no. S3, pp. 65–70, 2016. 1.24 2016
704 A. Shaheen, S. Hussain, and S. Nadeem, “Physiological flow of jeffrey six constant fluid model due to ciliary motion,” Communications in Theoretical Physics, vol. 66, no. 6, p. 701, 2016. 0.989 2016
705 S. Kanwal and R. Ali, “A cryptosystem with noncommutative platform groups,” Neural Computing and Applications, pp. 1–6, 2016. 2.505 2016
706 S. Inam and R. Ali, “A new ElGamal-like cryptosystem based on matrices over groupring,” Neural Computing and Applications, pp. 1–5, 2016. 2.505 2016
707 M. Afzal, R. Nawaz, and A. Ullah, “Attenuation of dissipative device involving cou­pled wave scattering and change in material properties,” Applied Mathematics and Computation, vol. 290, pp. 154–163, 2016. 1.738 2016
708 A. R. Kashif, M. Shoaib, and M. A. Latif, “Applications and derivation of Ostrowski type inequalities for n-times differentiable functions for some efficint quadrature rules,” Science International, vol. 28, no. 3, 2016. 1.365 2016
709 A. R. Kashif, M. Shoaib, and M. A. Latif, “Improved version of perturbed Ostrowski type inequalities for n-times differ­entiable mappings with three-step kernel and its application,” Journal of Nonlinear Sciences and Applications, vol. 9, 2016. 2016
710 E. Karapinar, R. Ali, T. Kamran, and M. U. Ali, “Generalized multivalued rational type contractions,” Journal of Advanced Mathematical Studies, vol. 9, no. 6, pp. 26–36, 2016. 2016
711 T. Kamran, M. Postolache, A. Ghiura, S. Batul, and R. Ali, “The banach contraction principle in C∗-algebra-valued b-metric spaces with application,” Fixed Point Theory and Applications, vol. 2016, no. 1, 2016. 0.971 2016
712 S. Nadeem, A. Munim, A. Shaheen, and S. Hussain, “Physiological flow of Carreau fluid due to ciliary motion,” AIP Advances, vol. 6, no. 3, p. 035125, 2016. 1.568 2016
713 A. Akgul, S. Hussain, and I. Pehlivan, “A new three-dimensional chaotic system, its dynamical analysis and electronic circuit applications,” Optik-International Journal for Light and Electron Optics, vol. 127, no. 18, pp. 7062–7071, 2016. 0.8335 2016
714 T. Hussain, S. Hussain, and T. Hayat, “Impact of double stratification and magnetic field in mixed convective radiative flow of maxwell nanofluid,” Journal of Molecular Liquids, vol. 220, pp. 870–878, 2016. 3.643 2016
715 S. Hussain, K. Mehmood, and M. Sagheer, “MHD mixed convection and entropy gen­eration of water–alumina nanofluid flow in a double lid driven cavity with discrete heating,” Journal of Magnetism and Magnetic Materials, vol. 419, pp. 140–155, 2016. 2.63 2016
716 K. Mehmood, S. Hussain, and M. Sagheer, “Mixed convection flow with non-uniform heat source/sink in a doubly stratified magnetonanofluid,” AIP Advances, vol. 6, no. 6, p. 065126, 2016. 1.568 2016
717 S. Shah, S. Hussain, and M. Sagheer, “MHD effects and heat transfer for the UCM fluid along with joule heating and thermal radiation using cattaneo-christov heat flux model,” AIP Advances, vol. 6, no. 8, p. 085103, 2016. 1.568 2016
718 S. T. Hussain, Z. H. Khan, S. Nadeem et al., “Water driven flow of carbon nanotubes in a rotating channel,” Journal of Molecular Liquids, vol. 214, pp. 136–144, 2016. 3.648 2016
719 A. Noor, S. Bashir, and V. A. Earnshaw, “Bullying, internalized hepatitis (Hepati­tis C virus) stigma, and self-esteem: Does spirituality curtail the relationship in the workplace,” Journal of Health Psychology, vol. 21, no. 9, pp. 1860–1869, 2016. 2.182 2016
720 M. Sarmad and S. Bashir, “Impact of nurses personality on patients satisfaction; an occupational focus on spirituality at work as moderator,” Abasyn University Journal of Social Sciences, vol. 9, no. 1, pp. 69–85, 2016. 2016
721 M. H. Khan, A. Fraz, and A. Hassan, “The diversification puzzle: The role of asymmet­ric information and insider trading in Pakistan,” The Lahore Journal of Economics, vol. 21, no. 2, pp. 97–119, 2016. 2016
722 A. Fraz and A. Hassan, “Testing information efficiency using random walk model: Empirical evidence from Karachi stock exchange,” Journal of Managerial Sciences, vol. 10, no. 2, pp. 249–266, 2016. 2016
723 L. Saqib and M. A. Zafar, “A realistic approach to the concept of ijarah (leasing) in islamic finance and its possible role in the development of agricultural sector in Pakistan,” Hamdard Islamicus, vol. 2, no. 3, 2016. 2016
724 L. S. Behar-Horenstein, N. Isaac, C. N. Southwell, M. E. Hudson-Vassell, L. Niu, M. Pratto, K. W. Roberts, R. J. Wingfield, J. D. Wolfgang, and M. A. Zafar, “Promot­ing academic socialization through service learning experiences,” International Journal of Teaching and Learning in Higher Education, vol. 28, no. 2, pp. 158–167, 2016. 2016
725 I. Ahmed, M. A. Zafar, K. Shahzad, and K. Khan, “Understanding the concept of Cor­porate Social Responsibility (CSR): Attributions from islamic perspective,” Journal of Islamic Business and Management, vol. 6, no. 2, pp. 135–152, 2016. 2016
726 Z. Riaz and M. I. Khan, “Impact of service failure severity and agreeableness on con­sumer switchover intention: Mediating role of consumer forgiveness,” Asia Pacific Journal of Marketing and Logistics, vol. 28, no. 3, pp. 420–434, 2016. 1.204 2016
727 J. K. Khattak, M. R. Naqvi, and S. Muhammad, “Impact of consumer beliefs on beef buying intention in Pakistan: An application of the theory of planned behavior,” Abasyn University Journal of Social Sciences, vol. 9, no. 2, pp. 495–508, 2016. 2016
728 M. A. Z. Raja, R. Samar, T. Haroon, and S. M. Shah, “Unsupervised neural network model optimized with evolutionary computations for solving variants of nonlinear MHD Jeffery-Hamel problem,” Applied Mathematics and Mechanics, vol. 36, no. 12, pp. 1611–1638, 2015. 0.763 2015
729 M. A. Z. Raja, J. A. Khan, A. M. Siddiqui, D. Behloul, T. Haroon, and R. Samar, “Exactly satisfying initial conditions neural network models for numerical treatment of first Painlev´e equation,” Applied Soft Computing, vol. 26, pp. 244–256, 2015. 3.541 2015
730 M. A. Z. Raja, J. A. Khan, S. M. Shah, R. Samar, and D. Behloul, “Comparison of three unsupervised neural network models for first Painlev´e Transcendent,” Neural Computing and Applications, vol. 26, no. 5, pp. 1055–1071, 2015. 2.505 2015
731 M. A. Z. Raja, M. A. Manzar, and R. Samar, “An efficient computational intelligence approach for solving fractional order riccati equations using ANN and SQP,” Applied Mathematical Modelling, vol. 39, no. 10, pp. 3075–3093, 2015. 2.35 2015
732 M. Asad, A. I. Bhatti, S. Iqbal, and Y. Asfia, “A smooth integral sliding mode controller and disturbance estimator design,” International Journal of Control, Automation and Systems, vol. 13, no. 6, pp. 1326–1336, 2015. 1.523 2015
733 A. A. Uppal, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Optimization and control of one dimensional packed bed model of underground coal gasification,” Journal of Process Control, vol. 35, pp. 11–20, 2015. 2.7 2015
734 M. Z. Shah, R. Samar, and A. I. Bhatti, “Guidance of air vehicles: A sliding mode approach,” IEEE Transactions on Control Systems Technology, vol. 23, no. 1, pp. 231–244, 2015. 3.882 2015
735 M. Z. Shah, R. Samar, and A. I. Bhatti, “Lateral track control of UAVs using the sliding mode approach: From design to flight testing,” Transactions of the Institute of Measurement and Control, vol. 37, no. 4, pp. 457–474, 2015. 1.049 2015
736 K. A. Khaliq, S. Hussain, A. Qayyum, and J. Pannek, “Novel data link layer encoding scheme for multi-hop wireless mesh network,” Procedia Computer Science, vol. 52, pp. 665–669, 2015. 2015
737 I. H. Syed and N. M. Khan, “MIMO–OFDM communication system with opportunistic diversity-order selection and KF-based channel estimation,” Wireless Personal Com­munications, vol. 84, no. 1, pp. 587–603, 2015. 0.951 2015
738 S. J. Nawaz, M. Riaz, N. M. Khan, and S. Wyne, “Temporal analysis of a 3D ellip­soid channel model for the vehicle-to-vehicle communication environments,” Wireless Personal Communications, vol. 82, no. 3, pp. 1337–1350, 2015. 0.951 2015
739 S. J. Nawaz, N. M. Khan, M. I. Tiwana, N. Hassan, and S. I. Shah, “Airborne internet access through submarine optical fiber cables,” IEEE Transactions on Aerospace and Electronic Systems, vol. 51, no. 1, pp. 167–177, 2015. 1.975 2015
740 M. Riaz, N. M. Khan, and S. J. Nawaz, “A generalized 3-D scattering channel model for spatiotemporal statistics in mobile-to-mobile communication environment,” IEEE Transactions on Vehicular Technology, vol. 64, no. 10, pp. 4399–4410, 2015. 4.066 2015
741 S. A. Moiz, H. Nasir, A. M. Nahhas, K. S. Karimov, and M. M. Ahmed, “Improved electrical response of MIS diode with disperse orange-25 as insulator deposited by centrifugal process,” Advances in Applied Science Research, vol. 6, no. 5, pp. 16–25, 2015. 3.52 2015
742 K. Karimov, M. M. Ahmed, F. Noshin, M. Saleem, M. Mahroof-Tahir, S. A. Moiz, K. M. Akhmedov, M. Zahid, S. Z. Abbas, and A. Rashid, “Nickel phthalocyanine based organic photo transistor: effect of semiconductor film thickness,” The European Physical Journal Applied Physics, vol. 72, no. 2, p. 20202, 2015. 0.684 2015
743 N. I. Ratyal, I. A. Taj, U. I. Bajwa, and M. Sajid, “3D face recognition based on pose and expression invariant alignment,” Computers & Electrical Engineering, vol. 46, pp. 241–255, 2015. 1.57 2015
744 M. Asif, I. A. Taj, S. M. Ziauddin, M. B. Ahmad, and M. Tahir, “A hybrid scheme based on pipelining and multitasking in mobile application processors for advanced video coding,” Scientific Programming, vol. 2015, p. 22, 2015. 0.224 2015
745 I. Hassan and A. R. Ghumman, “Application of civil engineering softwares for down-scaling GCM results,” International Invention Journal of Engineering Science and Technology, vol. 2, no. 1, pp. 1–9, 2015. 2015
746 M. Ahmed, S. Tayyaba, and M. W. Ashraf, “Effect of buckling restrained braces loca­tions on seismic responses of high-rise RC core wall buildings,” Shock and Vibration, vol. 2016, 2015. 1.281 2015
747 F. Qamar and M. Ali, “Modification of traditional supporting steelwork system for non-standard structures,” Engineering Structures, vol. 96, pp. 153–159, 2015. 2.258 2015
748 R. D. Evans, M. Rafique, M. Agha et al., “Exploring the required success factors for de­veloping absorptive capacity in knowledge intensive organisations,” The International Technology Management Review, vol. 5, no. 3, pp. 125–134, 2015. 2015
749 M. Rafique, R. D. Evans, M. T. Nawaz, and M. H. Agha, “Should organisations com­pete or collaborate when absorbing new external knowledge?” International Journal of Advanced Corporate Learning, vol. 8, no. 3, pp. 4–10, 2015. 2015
750 W. Rehmat, I. Aaltio, M. H. Agha, and H. R. Khan, “Is training effective? Evaluating training effectiveness in call centers,” EJBO: Electronic Journal of Business Ethics and Organization Studies, vol. 20, no. 1, 2015. 2015
751 S. Khan and M. A. Qadir, “Inter-path OOS packets differentiation based congestion control for simultaneous multipath transmission,” International Arab Journal of In­formation Technology, 2015. 0.724 2015
752 K. Shaukat, N. Masood, S. Mehreen, and U. Azmeen, “Dengue fever prediction:A data mining problem,” Journal of Data Mining in Genomics & Proteomics, vol. 2015, 2015. 1.16 2015
753 A. Shahid, M. T. Afzal, and M. A. Qadir, “Lessons learned: The complexity of accu­rate identification of in-text citations.” The International Arab Journal of Information Technology (IAJIT), vol. 12, no. 5, pp. 481–488, 2015. 0.065 2015
754 A. Hussain, S. Sattar, and M. T. Afzal, “Literature review on feature identification in sentiment analysis,” International Journal of Computer Applications, vol. 132, no. 3, pp. 22–27, 2015. 2015
755 S. Ur Rehman and A. Nadeem, “An approach to model based testing of multiagent systems,” The Scientific World Journal, vol. 2015, 2015. 1.219 2015
756 A. Munir, S. Azam, and S. Fazal, “Repositioning of methotrexate to cure mutations of DYR, TYMS and PURA Gene, Bleomycin in the treatment of mutant DNA, TOPa, POLa, and RIR genes,” Merit Research Journal of Medicine and Medical Sciences, vol. 3, p. 7, 2015. 1.257 2015
757 M. Nisar, N. Noureen, S. Fazal, and M. A. Qadir, “MCaVoH: A toolkit for mining, clas­sification and visualization of human microbiota,” Journal of Microbiological Methods, vol. 117, pp. 28–35, 2015. 1.857 2015
758 M. S. Khan and S. Fazal, “Advanced modelling and functional characterization of B2 bradykinin receptor,” International Journal Bioautomation, vol. 19, no. 2, 2015. 2015
759 N. Noureen, M. Touseef, S. Fazal, and M. A. Qadir, “ChromClust: A semi-supervised chromatin clustering toolkit for mining histone modifications interplay,” Genomics, vol. 106, no. 6, pp. 355–359, 2015. 2.386 2015
760 S. M. B. Shifa Tariq Ashraf, “Exploring the protein interaction related to hepatitus C virus,” NUST Journal of Natural Sciences, vol. 3, no. 1, pp. 13–18, 2015. 2015
761 M. B. Amjad Ali and V. Azevedo, “Autism Spectrum Disorders (ASD): From diagnosis to management,” Journal of Molecular and Genetic Medicine, 2015 1.2 2015
762 S. M. Bakhtiar, A. Ali, and D. Barh, “Epigenetics in head and neck cancer,” Can­cer Epigenetics: Risk Assessment, Diagnosis, Treatment, and Prognosis, pp. 751–769, 2015. 2015
763 M. Haseeb and S. Hussain, “Pharmacophore development for anti-lung cancer drugs,” Asian Pacific Journal of Cancer Prevention, vol. 16, no. 18, pp. 8307–8311, 2015. 1.24 2015
764 M. T. Muhammad Bilal, H. S. Khan, and H. Tariq Zeb, “Antimicrobial activity of ethanol and ethyl acetate extracts of roots adiantum capillus-veneris,” Journal of Rashid Latif Medical College, vol. 4, no. 1, pp. 39–44, 2015. 2015
765 S. M. B. Shifa Tariq Ashraf, “Exploring the protein interaction related to hepatitus,” NUST Journal of Natural Sciences, vol. 3, no. 1, pp. 13–18, 2015. 2015
766 A. U. Tariq, M. H. Khan, S. Hussain, R. Bano, and A. Navid, “In silico characteri­zation of genetic alterations associated with mal de meleda,” International Journal of Sciences: Basic and Applied Research, vol. 19, no. 2, pp. 65–76, 2015. 0.246 2015
767 T. Kamran et al.,“C∗-valued G-contractions and fixed points,” Journal of Inequalities and Applications, vol. 2015, no. 1, p. 304, 2015. 0.63 2015
768 M. Ramzan and M. Bilal, “Time dependent MHD nano-second grade fluid flow induced by permeable vertical sheet with mixed convection and thermal radiation,” PloS One, vol. 10, no. 5, p. e0124929, 2015. 4.411 2015
769 T. Kamran, R. Ali, and S. Sultan, “Generalized multivalued integral type weak con­tractions,” Journal of Advanced Mathematical Studies, vol. 8, no. 1, pp. 115–120, 2015. 2015
770 S. Batul and T. Kamran, “C∗-valued contractive type mapping,” Journal of Advanced Mathematical Studies, vol. 2015, no. 142, pp. 1–9, 2015. 2015
771 S. Hussain, Z. Abidin, and C. G. Petrov, “Time discretization scheme for the solutions of the chen system,” Journal of Computational and Nonlinear Dynamics, vol. 10, no. 6, pp. 1–7, 2015. 1.233 2015
772 S. Nadeem, A. Shaheen, and S. Hussain, “Physiological breakdown of Jeffrey six con­stant nanofluid flow in an endoscope with nonuniform wall,” AIP Advances, vol. 5, no. 12, pp. 1–16, 2015. 1.444 2015
773 M. M. Hassan, S. Bashir, and P. Mussel, “Personality, learning, and the mediating role of epistemic curiosity: A case of continuing education in medical physicians,” Learning and Individual Differences, vol. 42, pp. 83–89, 2015. 1.65 2015
774 M. Z. Mirza and S. Bashir, “Workers’9/11 in Pakistan: Neglected sparks causing confla­gration,” International Journal of Occupational Safety and Ergonomics, vol. 21, no. 3, pp. 405–410, 2015. 0.469 2015
775 T. Tahir and A. Fraz, “Human capital, capital structure, employee pay: Empirical evi­dence from Pakistan,” Global Journal of Management And Business Research, vol. 15, no. 9, pp. 1–23, 2015. 1.203 2015
776 S. M. M. R. Naqvi and S. Bashir, “IT-expert retention through organizational com­mitment: A study of public sector information technology professionals in Pakistan,” Applied Computing and Informatics, vol. 11, no. 1, pp. 60–75, 2015. 1.204 2015
777 A. Rasheed, S. Ajmal, and A. Qayyum, “Adaptive routing update approach for VANET using local neighbourhood change information,” Malaysian Journal of Computer Sci­ence, vol. 27, no. 4, 2014. 0.476 2014
778 A. Rasheed, S. Ajmal, and A. Qayyum, “Protocol independent adaptive route update for VANET,” The Scientific World Journal, vol. 2014, 2014. 1.203 2014
779 M. S. Akbar, M. S. Khan, K. A. Khaliq, A. Qayyum, and M. Yousaf, “Evaluation of IEEE 802.11n for multimedia application in VANET,” Procedia Computer Science, vol. 32, pp. 953–958, 2014. 2014
780 T. Saraj, M. Yousaf, S. Akbar, A. Qayyum, and M. Tufail, “Isp independent archi­tecture (iia) for ipv6 packet traversing and inter-connectivity over hybrid (ipv4/ipv6) internet,” Procedia Computer Science, vol. 32, pp. 973–978, 2014. 2014
781 K. A. Khaliq, M. S. Akbar, A. Qayyum, E. Elahi, and A. Zaheer, “Congestion avoid­ance hybrid wireless mesh protocol (CA-HWMP) for IEEE 802.11s,” Procedia Com­puter Science, vol. 32, pp. 229–236, 2014. 2014
782 S. Naz, T. Siraj, M. S. Akbar, M. Yousaf, A. Qayyum, and M. Tufail, “Performance analysis of IPv6 QoS for multimedia applications using real testbed,” Procedia Com­puter Science, vol. 32, pp. 182–189, 2014. 2014
783 S. Ajmal, A. Rasheed, A. Qayyum, and A. Hasan, “Classification of VANET MAC, routing and approaches: A detailed survey,” Journal of Universal Computer Science, vol. 20, no. 4, pp. 462–487, 2014. 0.698 2014
784 M. Ghafoor, I. A. Taj, W. Ahmad, and N. M. Jafri, “Efficient 2-fold contextual filtering approach for fingerprint enhancement,” IET Image Processing, vol. 8, no. 7, pp. 417– 425, 2014. 1.04 2014
785 M. Raza, G. Ahmed, and N. Khan, “Power control-based GRACE (PC-GRACE) rout­ing protocol for wireless sensor networks,” Journal of Networking Technology, vol. 5, no. 4, pp. 137–144, 2014. 2014
786 Q. Khan, A. I. Bhatti, and A. Ferrara, “Dynamic sliding mode control design based on an integral manifold for nonlinear uncertain systems,” Journal of Nonlinear Dynamics, vol. 2014, pp. 1–10, 2014. 3.464 2014
787 M. Pervaiz, Q. Khan, A. I. Bhatti, and S. A. Malik, “Dynamical adaptive integral slid­ing backstepping control of nonlinear nontriangular uncertain systems,” Mathematical Problems in Engineering, vol. 2014, pp. 1–14, 2014. 0.802 2014
788 M. A. Akram, M. A. Rizvi, A. I. Bhatti, and N. Messai, “Mode identification for hybrid model of SI engine to detect misfire fault,” Journal of Control Engineering and Applied Informatics, vol. 16, no. 3, pp. 65–74, 2014. 0.696 2014
789 A. A. Uppal, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Control oriented modeling and optimization of one dimensional packed bed model of underground coal gasification,” Journal of Process Control, vol. 24, no. 1, pp. 269–277, 2014. 2.7 2014
790 M. Pervaiz, Q. Khan, A. I. Bhatti, and S. A. Malik, “Output tracking via adaptive backstepping higher order integral sliding mode for uncertain nonlinear systems,” Dis­crete Dynamics in Nature and Society, vol. 2014, pp. 1–10, 2014. 0.711 2014
791 Q. Khan and A. I. Bhatti, “Robust dynamic integral sliding mode for MIMO nonlinear systems operating under matched and unmatched uncertainties,” Journal of Control Engineering and Applied Informatics, vol. 16, no. 4, pp. 107–117, 2014. 0.696 2014
792 N. Mehdi, M. Rehan, F. M. Malik, A. I. Bhatti, and M. Tufail, “A novel anti-windup framework for cascade control systems: An application to underactuated mechanical systems,” ISA Transactions, vol. 53, no. 3, pp. 802–815, 2014. 3.394 2014
793 Y. A. Butt, Y. L. Sachkov, and A. I. Bhatti, “Extremal trajectories and Maxwell strata in sub-Riemannian problem on group of motions of pseudo-Euclidean plane,” Journal of Dynamical and Control Systems, vol. 20, no. 3, pp. 341–364, 2014. 0.708 2014
794 M. A. R. Anjum and M. M. Ahmed, “A new approach for inversion of large random matrices in massive MIMO systems,” PloS One, vol. 9, no. 4, pp. 1–7, 2014. 2.806 2014
795 M. H. Zaheer, M. Rehan, G. Mustafa, and M. Ashraf, “Delay-range-dependent chaos synchronization approach under varying time-lags and delayed nonlinear coupling,” ISA Transactions, vol. 53, no. 6, pp. 1716–1730, 2014. 3.394 2014
796 M. A. Z. Raja, R. Samar, and M. M. Rashidi, “Application of three unsupervised neural network models to singular nonlinear BVP of transformed 2D Bratu equation,” Neural Computing and Applications, vol. 25, no. 7-8, pp. 1585–1601, 2014. 2.505 2014
797 M. Z. Shah, M. K. Ozgoren, and R. Samar, “3D guidance of unmanned aerial vehi­cles using sliding mode approach,” World Academy of Science, Engineering and Tech­nology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 8, no. 10, pp. 1705–1711, 2014. 0.708 2014
798 S. M. Shah, R. Samar, S. M. R. Naqvi, and J. A. Chambers, “Fractional order con­stant modulus blind algorithms with application to channel equalisation,” Electronics Letters, vol. 50, no. 23, pp. 1702–1704, 2014. 1.155 2014
799 M. A. Z. Raja, R. Samar et al., “Solution of the 2-dimensional Bratu problem using neural network, swarm intelligence and sequential quadratic programming,” Neural Computing and Applications, vol. 25, no. 7-8, pp. 1723–1739, 2014. 2.505 2014
800 M. A. Z. Raja and R. Samar, “Numerical treatment for nonlinear MHD Jeffery–Hamel problem using neural networks optimized with interior point algorithm,” Neurocom­puting, vol. 124, pp. 178–193, 2014. 3.317 2014
801 M. A. Z. Raja and R. Samar, “Numerical treatment of nonlinear MHD Jeffery–Hamel problems using stochas­tic algorithms,” Computers & Fluids, vol. 91, pp. 28–46, 2014. 2.313 2014
802 M. Riaz, M. Rehan, K.-S. Hong, M. Ashraf, and H. U. Rasheed, “Static and adap­tive feedback control for synchronization of different chaotic oscillators with mutually Lipschitz nonlinearities,” Chinese Physics B, vol. 23, no. 11, p. 110502, 2014. 1.233 2014
803 J.-G. Lee, U. A. Khan, J.-S. Hwang, J.-K. Seong, W.-J. Shin, B.-B. Park, and B.-W. Lee, “Assessment on the influence of resistive superconducting fault current limiter in VSC-HVDC system,” Physica C: Superconductivity and its Applications, vol. 504, pp. 163–166, 2014. 1.404 2014
804 U. Rafique and S. A. Ali, “Ultra-wideband patch antenna for K-band applications,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 12, no. 12, pp. 8252–8256, 2014. 2014
805 Z. Tang, M. Ali, and N. Chouw, “Residual compressive and shear strengths of novel coconut-fibre-reinforced-concrete interlocking blocks,” Construction and Building Ma­terials, vol. 66, pp. 533–540, 2014. 3.169 2014
806 M. Ali, “Seismic performance of coconut-fibre-reinforced-concrete columns with dif­ferent reinforcement configurations of coconut-fibre ropes,” Construction and Building Materials, vol. 70, pp. 226–230, 2014. 3.169 2014
807 N. Sharif, M. T. Afzal, and D. Helic, “Learning management systems: A need for specialized systems,” Transaction on Internet Research, Special Issue, vol. 10, no. 2, pp. 44–47, 2014. 2014
808 S. Ur Rehman, A. F. Haider, M. T. Afzal, and M. Asghar, “Measuring the relevance between tags and citations in social web,” Research Journal of Applied Sciences, En­gineering and Technology, vol. 7, no. 24, pp. 5172–5178, 2014. 2014
809 M. T. Khan et al., “CYP3A5 polymorphism and the risk of cancer: A metaanalysis,” European Scientific Journal, vol. 10, no. 30, 2014. 2014
810 A. A. Haider, A. Nadeem, and S. Rafiq, “Multiple objective test suite optimization: A fuzzy logic based approach,” Journal of Intelligent & Fuzzy Systems, vol. 27, no. 2, pp. 863–875, 2014. 1.004 2014
811 M. Haseeb, S. Vaqar, S. Fazal, and A. Khalil, “Ligand based pharmacophore develop­ment for colorectal cancer drugs,” Professional Medical Journal, vol. 21, no. 5, 2014. 2014
812 U. Shaukat, M. Toor, B. Ahmad, S. Fazal, and N. Mehmood, “Genetic and com­putational analysis of Tgfb1 & Fgfr2 polymorphism in correlation to breast cancer susceptibility in Pakistani women,” Journal of Cancer Science and Therapy, vol. 6, pp. 433–439, 2014. 3.09 2014
813 S. M. Bakhtiar, A. Ali, S. M. Baig, D. Barh, A. Miyoshi, and V. Azevedo, “Identifying human disease genes: advances in molecular genetics and computational approaches,” Genetics and Molecular Research, vol. 13, no. 3, pp. 5073–5087, 2014. 0.775 2014
814 F. Usman, B. Ahmad, and S. Hussain, “Institutional based prevalence of ischemic heart disease in Khyber Pakhtunkhwa Pakistan,” Journal of Rashid Latif Medical College, vol. 1, pp. 01–05, 2014. 2014
815 S. Zeb, S. Rehman, M. S. Khan, and H. S. Fazal, S and, “Parkinson’s disease mech­anisms and its treatment,” Journal of Rashid Latif Medical College, vol. 3, no. 1, pp. 49–53, 2014. 2014
816 S. Hussain, F. K. Bakhtiar, and M. H. Khan, “A bayesian meta-analysis and systematic review on global and local prevalence of hepatitis B,” International Journal of Scientific Research and Management, vol. 2, no. 12, pp. 1846–1855, 2014. 4.009 2014
817 S. Hussain, “Hepatitis B: A global burden,” International Journal of Novel Research in Life Sciences, vol. 1, no. 1, pp. 24–30, 2014. 2014
818 S. Hussain, “A common genetic disorder “deafness”,” International Journal of Novel Re­search in Life Sciences, vol. 1, no. 1, pp. 31–37, 2014. 2014
819 S. Hussain, M. H. Khan, M. T. Khan, S. Zeb, M. Haseeb, and A. U. Tariq, “Association of gjb2 gene mutations with non syndromic autosomal recessive deafness in different populations of the world,” International Journal of Basic and Applied Sciences, vol. 3, no. 4, p. 521, 2014. 2014
820 M. T. Khan, S. S. B. Khan, and S. Hussain, “Study of antimicrobial activity of garlic extracts against foodborne pathogens and its comparison with garlic oil and different antibiotics,” Pakistan Journal of Clinical and Biomedical Research, vol. 2, no. 1, pp. 33–37, 2014. 2014
821 M. Fatima, O. Khan, and S. Hussain, “Antimicrobial activity of citrus lemon against food borne pathogens,” Pakistan Journal of Clinical and Biomedical Research, vol. 2, no. 1, pp. 27–32, 2014. 2014
822 S. Hussain, F. Schieweck, and S. Turek, “Efficient Newton-multigrid solution techniques for higher order space–time Galerkin discretizations of incompressible flow,” Applied Numerical Mathematics, vol. 83, pp. 51–71, 2014. 1.221 2014
823 S. Ahmad, S. Hussain, A. A. Siddiqui, A. Ali, and M. Aqeel, “Application of Fourier transform to MHD flow over an accelerated plate with partial-slippage,” AIP Advances, vol. 4, no. 6, pp. 1–10, 2014. 1.414 2014
824 Z. Hassan, Z. Saleem, A. A. Rajput et al., “The mediating role of employee engagement between the relationship of distributive justice and organizational citizenship behav­ior: Empirical evidence from aviation sector of Pakistan,” International Journal of Management Sciences, vol. 2, no. 11, pp. 494–500, 2014. 4.136 2014
825 A. A. Rajput and S. H. Kalhoro, “The impact of macro factors entrepreneur, innovation and opportunity on entrepreneurial success of SMEs,” Middle-East Journal of Scientific Research, vol. 20, no. 2, pp. 149–161, 2014. 2014
826 F. Hanif and S. M. M. R. Naqvi, “Analysis of work family conflict in view of nurses,” Health Sector of Pakistan: International Journal of Gender and Women Studies, vol. 2, no. 4, pp. 103–116, 2014. 2014
827 M. A. Z. Raja, R. Samar et al., “Neural network optimized with evolutionary comput­ing technique for solving the 2-dimensional Bratu problem,” Neural Computing and Applications, vol. 23, no. 7-8, pp. 2199–2210, 2013. 2.505 2013
828 R. Samar, M. Z. Shah, and M. Nzar, “Lateral control implementation for an unmanned aerial vehicle,” ISRN Aerospace Engineering, vol. 2013, pp. 1–14. 2013
829 S. Naz, M. Naeem, and A. Qayyum, “Performance evaluation of index schemes for semantic cache,” International Journal of Information Technology and Computer Sci­ence, vol. 5, no. 4, pp. 40–46, 2013. 2013
830 S. Gillani, M. Naeem, R. Habibullah, and A. Qayyum, “Semantic schema matching using DBpedia,” International Journal of Intelligent Systems and Applications, vol. 5, no. 4, pp. 72–80, 2013. 2.313 2013
831 U. I. Bajwa, I. A. Taj, M. W. Anwar, and X. Wang, “A multifaceted independent performance analysis of facial subspace recognition algorithms,” PloS One, vol. 8, no. 2, pp. 1–12, 2013. 2.806 2013
832 M. Ajab, I. A. Taj, I. Shafi, and S. Stankovic, “A new form of Gabor Wigner Trans­form by adaptive thresholding in Gabor Transform and Wigner distribution and the power of signal synthesis techniques to enhance the strengths of GWT,” Metrology and Measurement Systems, vol. 20, no. 1, pp. 99–106, 2013. 1.598 2013
833 M. Riaz, S. J. Nawaz, and N. M. Khan, “3D ellipsoidal model for mobile-to-mobile radio propagation environments,” Wireless Personal Communications, vol. 72, no. 4, pp. 2465–2479, 2013. 0.951 2013
834 Z. M. Loni and N. M. Khan, “Analysis of fading statistics in cellular mobile commu­nication systems,” The Journal of Supercomputing, vol. 64, no. 2, pp. 295–309, 2013. 1.326 2013
835 Q. Ahmed, A. I. Bhatti, M. A. Rizvi, and M. Raza, “Gasoline engine air filter health monitoring by second-order sliding modes,” International Journal of Adaptive Control and Signal Processing, vol. 27, no. 6, pp. 447–461, 2013. 1.708 2013
836 S. Hussain, A. Bhatti, A. Samee, and S. H. Qaiser, “Estimation of reactivity and average fuel temperature of a pressurized water reactor using sliding mode differentiator observer,” IEEE Transactions on Nuclear Science, vol. 60, no. 4, pp. 3025–3032, 2013. 1.171 2013
837 Q. R. Butt, A. I. Bhatti, M. R. Mufti, M. A. Rizvi, and I. Awan, “Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer,” Simulation Modelling Practice and Theory, vol. 32, pp. 138–154, 2013. 1.954 2013
838 S. Hussain, A. I. Bhatti, A. Samee, and S. H. Qaiser, “Estimation of precursor density of a power reactor using uniform second order sliding mode observer,” Annals of Nuclear Energy, vol. 54, pp. 233–239, 2013. 1.312 2013
839 Q. Ahmed, A. I. Bhatti, Q. Khan, and M. Raza, “Condition monitoring of gasoline engine air intake system using second order sliding modes,” International Journal of Vehicle Design, vol. 62, no. 2-4, pp. 312–332, 2013. 0.713 2013
840 A. Arshad, A. I. Bhatti, E. Aamir, R. Samar, and S. A. Khan, “Optimization of 1-D packed bed model of underground coal gasification,” Optimization, no. 1/52, 2013. 0.943 2013
841 M. Naeem, S. Gillani, M. A. Qadir, and S. Asghar, “gSemSim: Semantic similarity measure for intra gene ontology terms,” International Journal of Information Technol­ogy and Computer Science (IJITCS), pp. 32–40, 2013. 2013
842 M. Naeem, M. B. Khan, and M. T. AFzal, “Expertise discovery: A web mining ap­proach,” Journal of AI and Data Mining, pp. 35–47, 2013. 0.1266 2013
843 N. A. Sajid, M. T. Afzal, M. A. Qadir, and S. A. Khan, “The insights of classification schemes,” Sindh University Research Journal (SURJ), vol. 46, 2013. 2013
844 N. A. Sajid, S. Asghar, M. Afzal, and T. Ali, “Fuzzy based document classification,” Proceeding of the Pakistan Academy of Sciences, vol. 51, no. 2, 2013. 2013
845 I. A. Qureshi and A. Nadeem, “GUI testing techniques: A survey,” International Journal of Future Computer and Communication, vol. 2, no. 2, p. 142, 2013. 2013
846 A. A. Haider and A. Nadeem, “A survey of safety analysis techniques for safety critical systems,” International Journal of Future Computer and Communication, vol. 2, no. 2, p. 134, 2013. 2013
847 A. A. Haider and A. Nadeem, “Formal modelling languages to specify real-time systems: A survey,” Interna­tional Journal of Future Computer and Communication, vol. 2, no. 2, p. 130, 2013. 2013
848 S. Bilal, S. B. Ali, S. Fazal, and A. Mir, “Generation of a 3d model for human cereblon using comparative modelling,” Journal of Bioinformatics and Sequence Analysis, vol. 5, no. 1, pp. 10–15, 2013. 2013
849 M. H. Khan, S. Fazal, R. Bano, and H. Rashid, “A miracle if restored, p53,” African Journal of Biotechnology, vol. 12, no. 24, pp. 3745–3751, 2013. 0.573 2013
850 A. Kanwal, S. Fazal, S. Asghar, and M. Naeem, “MODY GENES, linkage analysis and subgroup discovery from text documents,” Professional Medical Journal, vol. 20, no. 4, 2013. 2013
851 A. Kanwal, S. Fazal, S. Asghar, and M. Naeem, “Subgroup discovery of the MODY GENES,” Professional Medical Journal, vol. 20, no. 5, 2013. 2013
852 R. Mahmood and S. Hussain, “Galerkin discretizations of 4th order in space and time for the convection-diffusion-reaction (CoDiRe) equation,” International Journal of Ba­sic & Applied Sciences, vol. 13, no. 4, pp. 1–12, 2013. 2013
853 S. Bashir and M. Nasir, “Breach of psychological contract, organizational cynicism and union commitment: A study of hospitality industry in Pakistan,” International Journal of Hospitality Management, vol. 34, pp. 61–65, 2013. 2.757 2013
854 M. A. Khattak, N. Iqbal, A. A. Rajut et al., “Impact of culture on the employee perfor­mance: A comparison of private and public sector universities,” International Journal of Academic Research in Accounting, Finance and Management Sciences, vol. 3, no. 1, pp. 210–218, 2013. 2013
855 N. Jamal and A. Fraz, “Relationship of single stock futures with the spot price: Ev­idence from Karachi stock exchange,” Research Journal of the Institute of Business Administration Karachi-Pakistan, vol. 8, no. 1, pp. 52–76, 2013. 2013
856 S. Naqvi, M. Ishtiaq, N. Kanwal, M. U. Butt, and S. Nawaz, “Impact of gender diversity on team performance: The moderating role of organizational culture in telecom sector of Pakistan,” Asian Journal of Social Sciences & Humanities, vol. 2, no. 4, pp. 228–235, 2013. 2013
857 S. M. M. R. Naqvi, N. Kanwal, M. Ishtiaq, and M. U. Butt, “Impact of corporate social responsibility on organizational performance of tobacco industry of Pakistan with moderating role of business ethics,” International Journal of Management Sciences and Business Research, vol. 2, no. 9, pp. 23–27, 2013. 3.274 2013
858 S. M. M. R. Naqvi, N. Kanwal, M. Ishtiaq, M. Ali et al., “Impact of job autonomy on organizational commitment: Moderating role of job satisfaction in tobacco industry of Pakistan,” Far East Journal of Psychology and Business, vol. 12, no. 5, pp. 57–72, 2013. 2013
859 S. R. Naqvi, M. Ishtiaq, N. Kanwal, and M. Ali, “Impact of job autonomy on organiza­tional commitment and job satisfaction: The moderating role of organizational culture in fast food sector of Pakistan,” International Journal of Business and Management, vol. 8, no. 17, pp. 92–102, 2013. 2013
860 S. M. M. R. Naqvi, M. Ishtiaq, N. Kanwal, M. Ali, and I. S, “Impact of corporate social responsibility on brand image in different FMCGs of Pakistan,” Interdisciplinary Journal of Contemporary Research In Business, vol. 5, no. 1, pp. 79–93, 2013. 2013
861 S. M. M. R. Naqvi, F. Malik, and Q. Mahmood, “The impact of promotions, recog­nition, autonomy and pay incentives on job satisfaction: A case of banking sector employees in Pakistan,” European Journal of Business Management, vol. 5, no. 5, pp. 187–193, 2013. 7.17 2013
862 S. Jawaid, A. A. Rajput, and S. M. M. R. Naqvi, “Impact of celebrity endorsement on teenager impulsive buying behavior,” Interdisciplinary Journal of Contemporary Research in Business, vol. 4, no. 10, pp. 1071–1080, 2013. 2013
863 Q. Khan, A. I. Bhatti, M. Iqbal, and Q. Ahmed, “Dynamic integral sliding mode control for SISO uncertain nonlinear systems,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 7, pp. 4621–4633, 2012. 2012
864 I. H. Kazmi and A. I. Bhatti, “Parameter estimation of proton exchange membrane fuel cell system using sliding mode observer,” International Journal of Innovative Comput­ing, Information and Control, vol. 8, no. 7B, pp. 5137–5148, 2012. 2012
865 S. H. Qaiser, M. Iqbal, A. I. Bhatti, R. Samar, and J. Qadir, “Estimation of reactivity in a research reactor by using a second-order sliding mode observer,” Nuclear Science and Engineering, vol. 172, no. 3, pp. 327–336, 2012. 0.822 2012
866 P. A. Shah, M. Yousaf, A. Qayyum, and H. B. Hasbullah, “Performance compari­son of end-to-end mobility management protocols for TCP,” Journal of Network and Computer Applications, vol. 35, no. 6, pp. 1657–1673, 2012. 3.5 2012
867 S. Naz, Y. Majeed, and A. Qayyum, “Automatic translation of heterogeneous data models,” International Journal of Computer and Communication Engineering, vol. 1, no. 1, pp. 35–38, 2012. 2012
868 M. Yousaf, A. Qayyum, and S. A. Malik, “An architecture for exploiting multihoming in mobile devices for vertical handovers & bandwidth aggregation,” Wireless Personal Communications, vol. 66, no. 1, pp. 57–79, 2012. 0.951 2012
869 M. Rafiq, S.-U. Rehman, F.-U. Rehman, Q. R. Butt, and I. Awan, “A second order sliding mode control design of a switched reluctance motor using super twisting algo­rithm,” Simulation Modelling Practice and Theory, vol. 25, pp. 106–117, 2012. 1.954 2012
870 U. I. Bajwa, I. A. Taj, and M. W. Anwar, “A unified classifier for robust face recognition based on combining multiple subspace algorithms,” Optics Communications, vol. 285, no. 21, pp. 4324–4332, 2012. 1.588 2012
871 M. Ajab, I. A. Taj, and N. A. Khan, “Comparative analysis of variants of Gabor-Wigner transform for cross-term reduction,” Metrology and Measurement Systems, vol. 19, no. 3, pp. 499–508, 2012. 1.203 2012
872 Q. Ahmed, A. Iqbal, I. Taj, and K. Ahmed, “Gasoline engine intake manifold leakage diagnosis/prognosis using hidden Markov model,” International Journal of Innovative Computing, Information and Control, vol. 8, no. 7, pp. 4661–4674, 2012. 2012
873 M. Touseef, M. Aziz-ul Haq, U. Rafique, M. A. Khan, M. M. Ahmed et al., “Genetic algorithm optimization of log-periodic dipole array,” International Journal of Electro­magnetics and Applications, vol. 2, no. 6, pp. 169–173, 2012. 2012
874 U. Rafique, S. A. Ali, M. T. Afzal, and M. Abdin, “Bandstop filter design for GSM shielding using Frequency Selective Surfaces,” International Journal of Electrical and Computer Engineering, vol. 2, no. 6, pp. 846–850, 2012. 2012
875 I. A. Sajid, S. G. Ziavras, and M. M. Ahmed, “Efficient face recognition using frequency distribution curve matching,” IET Image Processing, vol. 6, no. 8, pp. 1161–1169, 2012,. 1.244 2012
876 I. A. Sajid, M. M. Ahmed, and M. Sagheer, “An optimized face recognition system using stable orthogonalization,” International Journal of Innovative Computing, In­formation and Control, vol. 8, no. 1A, pp. 219–32, 2012. 2012
877 M. Abdin, U. Rafique, F. Malik, S. Qasim, M. A. Khan, and M. M. Ahmed, “A novel dual-band frequency selective surface absorber,” International Journal of Electromag­netics and Applications, vol. 2, no. 6, pp. 182–185, 2012. 2012
878 M. Aziz-ul Haq, M. T. Afzal, U. Rafique, M. A. Khan, M. M. Ahmed et al., “Log peri­odic dipole antenna design using particle swarm optimization,” International Journal of Electromagnetics and Applications, vol. 2, no. 4, pp. 65–68, 2012. 2012
879 S. J. Nawaz, K. I. Ahmed, M. N. Patwary, and N. M. Khan, “Superimposed training-based compressed sensing of sparse multipath channels,” IET Communications, vol. 6, no. 18, pp. 3150–3156, 2012. 1.061 2012
880 R. Samar and W. A. Kamal, “Optimal path computation for autonomous aerial vehi­cles,” Cognitive Computation, vol. 4, no. 4, pp. 515–525, 2012. 3.441 2012
881 I. Ghalib, M. H. Agha, S. Hameed, and M. A. Choudhary, “A survey of lean imple­mentation gap analysis in public sector organizations,” Life Science Journal, vol. 9, no. 4, pp. 1261–1269, 2012. 2.743 2012
882 S. Hameed, M. H. Agha, and M. A. Choudhary, “The role of data protection technolo­gies: A case study,” Life Science Journal, vol. 9, no. 4, pp. 1270–1279, 2012. 2.743 2012
883 A. Hanif and M. H. Agha, “Utilizing quality tools: A predictive maintenance perspec­tive,” International Journal of Performability Engineering, vol. 8, no. 6, pp. 699–704, 2012. 2012
884 S. Z. Ahmad, M. A. Qadir, M. S. Akbar, and A. Bouras, “Analysis of multi-server scheduling paradigm for service guarantees during network mobility,” Wireless Per­sonal Communications, vol. 63, no. 1, pp. 177–197, 2012. 0.951 2012
885 T. Hussain, M. A. Qadir, and S. Asghar, “Fuzzification of web objects: a semantic web mining approach,” International Journal of Computer Science, vol. 9, no. 2, pp. 61–67, 2012. 2.28 2012
886 M. Ahmad, S. Gruner, and M. T. Afzal, “Computational analysis of medieval manuscripts: A new tool for analysis and mapping of medieval documents to mod­ern orthography,” Journal of Universal Computer Science (JUCS), vol. 18, no. 20, pp. 2750–2770, 2012. 0.762 2012
887 A. Latif, M. T. Afzal, and H. A. Maurer, “Weaving scholarly legacy data into web of data,” Journal of Universal Computer Science (JUCS), vol. 18, no. 16, pp. 2301–2318, 2012. 0.762 2012
888 M. W. Hussain, M. T. Afzal, and M. Waqas, “Finding semantic relationship among associated medical terms,” International Journal of Emerging Sciences, vol. 2, no. 2, p. 300, 2012. 2012
889 S. A. Khan, M. T. Afzal, and M. A. Qadir, “Metadata based classification of scientific documents,” International Journal of Information Studies, vol. 4, no. 4, pp. 184–193, 2012. 2012
890 S. Kanwal, S. Nishat, M. I. Khan, S. I. Malik, and K. Akhtar, “Comparative homology modeling of human rhodopsin with several templates of bovine rhodopsin,” African Journal of Biotechnology, vol. 11, no. 2, pp. 466–473, 2012. 0.573 2012
891 Z. Khalid, S. Sameen, S. Malik, and S. Shehzad, “Computational analysis on the role of GPM6A in human thyroid cancer,” Journal of Data Mining in Genomics and Proteomics, vol. 3, no. 114, pp. 2153–0602, 2012. 1.16 2012
892 S. A. Shad, A. H. Sayyed, S. Fazal, M. A. Saleem, S. M. Zaka, and M. Ali, “Field evolved resistance to carbamates, organophosphates, pyrethroids, and new chemistry insecticides in Spodoptera litura Fab. (Lepidoptera: Noctuidae),” Journal of pest sci­ence, vol. 85, no. 1, pp. 153–162, 2012. 3.78 2012
893 S. F. Attiya K., “Maturity-onset diabetes of the young (MODY) Genes: Literature review,” Clinical Practice, vol. 1, no. 1, pp. 4–11, 2012. 2.4 2012
894 S. Azam, S. Fazal, and I. Muhammad, “Assessment of non-syndromic autosomal reces­sive intellectual disability (NS-ARID) genes,” International Journal of Modern Phar­maceutical Research, vol. 1, pp. 94–105, 2012. 2012
895 S. Bashir, M. Nasir, S. Qayyum, and A. Bashir, “Dimensionality of counterproductive work behaviors in public sector organizations of Pakistan,” Public Organization Review, vol. 12, no. 4, pp. 357–366, 2012. 2012
896 A. A. Rajput, S. H. Kalhoro, and R. Wasif, “Impact of product price and quality on consumer buying behavior: Evidence from Pakistan,” Interdisciplinary Journal of Contemporary Research in Business, vol. 4, no. 4, pp. 485–496, 2012. 2012
897 S. Rasool, A. A. Kiyani, M. J. Aslam, M. U. Akram, and A. A. Rajput, “Impact of organizational culture on employee’s career salience: An empirical study of banking sector in Islamabad, Pakistan,” International Journal of Business and Social Science, vol. 3, no. 7, pp. 299–306, 2012. 2012
898 H. Haroon, H. R. Yasir, S. Azeem, and F. Ahmed, “International portfolio diversifica­tion in developing equity markets of South Asia,” Studies in Business & Economics, vol. 7, no. 1, pp. 80–100, 2012. 2012
899 S. M. M. R. Naqvi, M. Ishtiaq, N. Kanwal, and S. Inderyas, “Impact of gender diversity on organizational performance in telecom sector of Pakistan: The moderating role of organizational culture,” Scottish Journal of Arts, Social Sciences and Scientific Studies, vol. 7, no. 1, pp. 32–49, 2012. 2012
900 S. J. Nawaz, N. M. Khan, M. N. Patwary, and M. Moniri, “Effect of directional an­tenna on the Doppler spectrum in 3-D mobile radio propagation environment,” IEEE Transactions on Vehicular Technology, vol. 60, no. 7, pp. 2895–2903, 2011. 4.066 2011
901 Q. Ahmed, A. I. Bhatti, and M. Iqbal, “Virtual sensors for automotive engine sensors fault diagnosis in second-order sliding modes,” IEEE Sensors Journal, vol. 11, no. 9, pp. 1832–1840, 2011. 2.512 2011
902 S. Iqbal and A. I. Bhatti, “Load varying polytopic based robust controller design in LMI framework for a 2DOF stabilized platform,” Arabian Journal for Science and Engineering, vol. 36, no. 2, pp. 311–327, 2011. 0.244 2011
903 Q. Ahmed and A. I. Bhatti, “Estimating SI engine efficiencies and parameters in second-order sliding modes,” IEEE Transactions on Industrial Electronics, vol. 58, no. 10, pp. 4837–4846, 2011. 7.168 2011
904 M. A. Rizvi, A. I. Bhatti, and Q. R. Butt, “Hybrid model of the gasoline engine for misfire detection,” IEEE Transactions on Industrial Electronics, vol. 58, no. 8, pp. 3680–3692, 2011. 7.168 2011
905 M. Iqbal, A. I. Bhatti, S. I. Ayubi, and Q. Khan, “Robust parameter estimation of nonlinear systems using sliding-mode differentiator observer,” IEEE Transactions on Industrial Electronics, vol. 58, no. 2, pp. 680–689, 2011. 7.168 2011
906 E. Elahi and A. Qayyum, “Connection oriented bandwidth aggregation system,” In­ternational Journal of Multidisciplinary Sciences and Engineering, vol. 2, no. 7, pp. 64–68, 2011. 2011
907 M. Rafiq and Q. Raza, “Time-varying stabilizing feedback control for a sub-class of nonholonomic systems,” European Journal of Scientific Research, vol. 53, no. 3, pp. 346–358, 2011. 0.736 2011
908 F. Rehman and Q. Butt, “Feedback stabilization of nonholonomic systems accom­plished by tracking to their own extended systems,” European Journal of Scientific Research, 2011. 0.736 2011
909 M. Rafiq, S. U. Rehman, F. R. Rehman, and Q. A. Butt, “Performance comparison of PI and sliding mode for speed control applications of SR motor,” European Journal of Scientific Research, vol. 50, no. 3, pp. 368–384, 2011. 0.736 2011
910 M. Rafiq, S.-u.-R. , F. Rehman, and Q. Butt, “Power efficient higher order sliding mode control of switched reluctance motor for speed control applications,” International Journal of Computer Science Issues, vol. 8, no. 1, pp. 378–387, 2011. 2011
911 N. A. Khan, I. A. Taj, M. N. Jaffri, and S. Ijaz, “Cross-term elimination in Wigner distribution based on 2D signal processing techniques,” Signal Processing, vol. 91, no. 3, pp. 590–599, 2011. 0.893 2011
912 U. I. Bajwa, I. A. Taj, and Z. E. Bhatti, “A comprehensive comparative performance analysis of Laplacianfaces and Eigenfaces for face recognition,” The Imaging Science Journal, vol. 59, no. 1, pp. 32–40, 2011. 2011
913 I. A. Sajid, M. M. Ahmed, and M. Sagheer, “FPGA-based householder implementation for efficient eigenvalues calculation,” International Journal of Innovative Computing, Information and Control, vol. 7, no. 10, pp. 5939–5946, 2011. 2011
914 S. A. Moiz, K. S. Karimov, and M. M. Ahmed, “Effect of gravity condition on charge transport properties of polymer thin film deposited by centrifigual method,” Optoelec­tronics and Advanced Materials: Rapid Communications, vol. 5, pp. 577–580, 2011. 0.47 2011
915 K. H. Karimov, M. M. Ahmed, Z. M. Karieva, M. Saleem, A. Mateen, and S. A. Moiz, “Humidity sensing properties of carbon nano-tube thin films,” Sensor Letters, vol. 9, no. 5, pp. 1649–1653, 2011. 0.819 2011
916 M. T. Afzal and H. A. Maurer, “Expertise recommender system for scientific commu­nity,” Journal of Universal Computer Science (JUCS), vol. 17, no. 11, pp. 1529–1549, 2011. 0.398 2011
917 M. Fahad, N. Moalla, A. Bouras, M. A. Qadir, and M. Farukh, “Towards classification of web ontologies for the emerging semantic web,” Journal of Universal Computer Science, vol. 17, no. 7, pp. 1021–1042, 2011. 0.398 2011
918 N. I. Qazi and M. A. Qadir, “Algorithms for the evaluation of ontologies for extended error taxonomy and their application on large ontologies,” Journal of Universal Com­puter Science, vol. 17, no. 7, pp. 1005–1020, 2011. 0.398 2011
919 S. A. Khan, M. T. Afzal, A. B. Nawab, M. A. Qadir, and A. Shahid, “Discoveries of contextualized research areas for scientific community,” Australian Journal of Basic and Applied Science, vol. 5, no. 6, pp. 1641–1647, 2011. 0.7039 2011
920 A. Shahid, M. T. Afzal, and M. Qadir, “Discovering semantic relatedness between scientific articles through citation frequency,” in Workshop on Text mining for Schol­arly Communications and Repositories, Australian Journal of Basic Applied Sciences, vol. 5, 2011, pp. 1599–1604. 0.7039 2011
921 A. A. A. Jilani, M. Usman, and A. Nadeem, “Comparative study on DFD to UML diagrams transformations,” World of Computer Science and Information Technology, vol. 1, no. 1, pp. 10–16, 2011. 2011
922 K. Latif, A. Nadeem, and G.-S. Lee, “A UML profile for real time industrial con­trol systems,” Software Engineering, Business Continuity, and Education, pp. 97–107, 2011. 2011
923 Z. Shaukat Iqbal Malik, S. Khalid, and Sameen, “In silico gene expression based anal­ysis on claudine family members association with human thyroid cancer,” Journal of Proteomics and Bioinformatics, 2011. 1.57 2011
924 S. Sameen, Z. Khalid, and S. I. Malik, “Role of pyruvate dehydrogenase kinases (PDKs) and their respective microRNAs in human ovarian cancer,” Journal of Medical Genetics and Genomics, vol. 3, no. 7, pp. 115–121, 2011. 2011
925 S. Malik and S. Khan, “Cancer prevention through employ of appropriate diet in daily schedule,” Journal of Cancer Science & Therapy, vol. 15, p. 17, 2011. 0.45 2011
926 K. Attiya, F. Sahar, M. Ismail, M. Qaisar, and J. Amara, “Linkage analysis of first six MODY genes to known LOCI and screening of three most prevalent MODY genes in pakistani population,” International Journal of Genetics, vol. 3, no. 1, p. 35, 2011. 1.326 2011
927 R. Bano, S. Fazal, M. H. Khan, and H. Rashid, “miRNAs: Small but deadly,” African Journal of Biotechnology, vol. 10, no. 47, pp. 9542–9548, 2011. 0.573 2011
928 A. Kanwal, S. Fazal, M. Ismail, and N. Naureen, “A narrative insight to maturity-onset diabetes of the young,” Clinical Reviews and Opinions, vol. 3, no. 1, pp. 6–13, 2011. 2011
929 S. Bashir, H. R. Khattak, A. Hanif, and S. N. Chohan, “Whistle-blowing in public sector organizations: Evidence from Pakistan,” The American Review of Public Ad­ministration, vol. 41, no. 3, pp. 285–296, 2011. 1.439 2011
930 S. Bashir, “HIV/AIDS stigma at the workplace: Exploratory findings from Pakistan,” SAHARA-J: Journal of Social Aspects of HIV/AIDS, vol. 8, no. 3, pp. 156–161, 2011. 1.33 2011
931 A. Rajput, “Impact of innovation and resources in entrepreneurial success: A case study of Pakistani SMEs,” Interdisciplinary Journal of Contemporary Research in Business, vol. 2, no. 11, pp. 606–636, 2011. 2011
932 M. Rehmani and M. I. Khan, “The impact of e-media on customer purchase intention,” International Journal of Advanced Computer Science and Applications, vol. 2, no. 3, pp. 100–103, 2011. 1.324 2011
933 S. M. M. R. Naqvi and S. Nadeem, “Impact of high performance work practices sys­tem on motivation,” Interdisciplinary Journal of Contemporary Research in Business, vol. 3, no. 8, pp. 197–210, 2011. 2011
934 I. Ahmad and A. I. Bhatti, “A novel technique for spectral processing of a fiber optic gyroscope,” Kuwait Journal of Science & Engineering, vol. 37, no. 1B, pp. 49–68, 2010. 0.039 2010
935 F.-U. Rehman and L. Khan, “Attitude regulating control of a rigid spacecraft model in actuating failure mode,” International Journal of Modelling and Simulation, vol. 30, no. 3, pp. 277–288, 2010. 2010
936 R. Samar, S. Zahir, and M. A. Khan, “Flight control using pin-protuberances for blunted cones,” The Aeronautical Journal, vol. 114, no. 1154, pp. 245–257, 2010. 0.482 2010
937 R. Samar and I. Postlethwaite, “Design and implementation of a digital multimode H∞ controller for the Spey turbofan engine,” Journal of Dynamic Systems, Measurement, and Control, vol. 132, no. 1, pp. 1–11, 2010. 1.388 2010
938 M. S. Razzaq and N. M. Khan, “Performance comparison of adaptive beamforming algorithms for smart antenna systems,” World Applied Sciences Journal, vol. 11, no. 7, pp. 775–785, 2010. 2010
939 S. J. Nawaz, B. H. Qureshi, and N. M. Khan, “A generalized 3-D scattering model for a macrocell environment with a directional antenna at the BS,” IEEE Transactions on Vehicular Technology, vol. 59, no. 7, pp. 3193–3204, 2010. 4.066 2010
940 M. T. Ibrahim, M. A. Khan, K. S. Alimgeer, M. K. Khan, I. A. Taj, and L. Guan, “Velocity and pressure-based partitions of horizontal and vertical trajectories for on­line signature verification,” Pattern Recognition, vol. 43, no. 8, pp. 2817–2832, 2010. 4.552 2010
941 M. T. Afzal, H. Maurer, W.-T. Balke, and N. Kulathuramaiyer, “Rule based au­tonomous citation mining with TIERL,” Journal of Digital Information Management, vol. 8, no. 3, pp. 196–204, 2010. 2010
942 A. U. Saeed, M. T. Afzal, A. Latif, and K. Tochtermann, “Disseminating knowledge through tags: Recommending tags for scientific resources,” Journal of IT in Asia, vol. 3, 2010. 0.5 2010
943 A. Latif, A. Us Saeed, P. Hoefler, K. Tochtermann, and M. T. Afzal, “Harvesting per­tinent resources from linked open data,” Journal of Digital Information Management, vol. 8, no. 3, pp. 205–212, 2010. 2010
944 A. D. Kligerman, S. I. Malik, and J. A. Campbell, “Cytogenetic insights into DNA damage and repair of lesions induced by a monomethylated trivalent arsenical,” Muta­tion Research/Genetic Toxicology and Environmental Mutagenesis, vol. 695, no. 1, pp. 2–8, 2010. 2.033 2010
945 S. Khan, A. Shahid, S. Fazal, and A. Jilani, “Predoms: A computational toolkit de­veloped to perform prediction of domains from sequence,” World Applied Sciences Journal, vol. 8, pp. 44–46, 2010. 2010
946 S. H. Qaiser, A. I. Bhatti, M. Iqbal, R. Samar, and J. Qadir, “Estimation of precur­sor concentration in a research reactor by using second order sliding mode observer,” Nuclear Engineering and Design, vol. 239, no. 10, pp. 2134–2140, 2009. 1.142 2009
947 S. H. Qaiser, A. I. Bhatti, M. Iqbal, R. Samar, and J. Qadir, “Model validation and higher order sliding mode controller design for a research reactor,” Annals of Nuclear Energy, vol. 36, no. 1, pp. 37–45, 2009. 1.132 2009
948 I. Sajid, M. M. Ahmed, and I. Taj, “Time efficient face recognition using stable Gram-Schmidt orthonormalization,” International Journal of Signal Processing, Image Pro­cessing and Pattern, vol. 1, no. 2, pp. 35–48. 2009
949 S. A. Moiz, M. M. Ahmed, K. S. Karimov, F. Rehman, and J.-H. Lee, “Space charge limited current–voltage characteristics of organic semiconductor diode fabricated at various gravity conditions,” Synthetic Metals, vol. 159, no. 13, pp. 1336–1339, 2009. 2.435 2009
950 N. M. Khan, Z. Khalid, and G. Ahmed, “Gradient cost establishment (GRACE) for an energy-aware routing in wireless sensor networks,” EURASIP Journal on Wireless Communications and Networking, vol. 2009, p. 7, 2009. 1.529 2009
951 F. Yousuf, A. Nadeem, Z. Zaman, and M. Ali, “A configurable fault tolerant archi­tecture for component-based systems,” International Journal of Software Engineering and Its Applications, vol. 3, no. 2, pp. 1738–9984, 2009. 2009
952 M. Usman and A. Nadeem, “Automatic generation of java code from UML diagrams using UJECTOR,” International Journal of Software Engineering and Its Applications, vol. 3, no. 2, pp. 21–37, 2009. 2009
953 A. A. Rajput and M. Ali, “A preliminary investigation of entrepreneurial women in potohar region of Pakistan,” Journal of Chinese Entrepreneurship, vol. 1, no. 3, pp. 193–208, 2009. 2009
954 Q. R. Butt and A. I. Bhatti, “Estimation of gasoline-engine parameters using higher order sliding mode,” IEEE Transactions on Industrial Electronics, vol. 55, no. 11, pp. 3891–3898, 2008. 5.468 2008
955 S. Gillani, I. Khan, S. Qureshi, and A. Qayyum, “Vehicular ad hoc network (VANET): enabling secure and efficient transportation system,” Technical Journal, University of Engineering and Technology, Taxila, vol. 13, 2008. 2008
956 M. M. Ahmed, K. S. Karimov, and S. A. Moiz, “Photoelectric behavior of n­GaAs/orange dye, vinyl-ethynyl-trimethyl-piperidole/conductive glass sensor,” Thin Solid Films, vol. 516, no. 21, pp. 7822–7827, 2008. 1.771 2008
957 N. M. Khan, M. T. Simsim, and P. B. Rapajic, “A generalized model for the spa­tial characteristics of the cellular mobile channel,” IEEE Transactions on Vehicular Technology, vol. 57, no. 1, pp. 22–37, 2008. 5.468 2008
958 M. S. Akbar, S. Z. Ahmed, and M. A. Qadir, “Performance optimization of trans­mission control protocol in heterogeneous wireless network during mobility,” IJCSNS International Journal of Computer Science and Network Security, vol. 8, no. 8, pp. 70–80, 2008. 1.5 2008
959 M. Ahmad, M. A. Qadir, A. Razaque, and M. S. Ullah, “Efficient query processing over semantic cache,” Intelligent Systems and Agents, p. 61, 2008. 2.929 2008
960 I. Ihsan, M. Rehman, M. U. Ahmed, and M. A. Qadir, “S-point a semantic based e-learning content development tool,” Journal of Applied Sciences, vol. 8, no. 1, pp. 127–133, 2008. 2008
961 A. Razaque, M. A. Qadir, K. Shahzad, O. B. Nazir, and S. H. Khalid, “Device discovery with qualitative & quantitative analysis of TCP variants under mobility based anchor point node in hybrid network,” Wireless Applications and Computing, p. 129, 2008. 2008
962 M. Fahad and A. Nadeem, “A survey of UML based regression testing,” Intelligent Information Processing IV, pp. 200–210, 2008. 2008
963 S. Bashir and M. I. Ramay, “Determinants of organizational commitment: A study of information technology professionals in Pakistan,” Journal of Behavioral and Applied Management, vol. 9, no. 2, pp. 226–238, 2008. 2008
964 K. Shahzad, S. Bashir, and M. I. Ramay, “Impact of HR practices on perceived perfor­mance of university teachers in Pakistan,” International Review of Business Research Papers, vol. 4, no. 2, pp. 302–315, 2008. 2008
965 A. A. Rajput and A. Murad, “A national survey: An examination of entrepreneurship centers in Pakistan,” International Journal of Entrepreneurship, vol. 12, 2008. 2008
966 A. Rahman, S. M. M. R. Naqvi, and M. I. Ramay, “Measuring turnover intention: A study of it professionals in Pakistan,” International Review of Business Research Papers, vol. 4, no. 3, pp. 45–55, 2008. 2008
967 Z. Khalid, G. Ahmed, and N. M. Khan, “Impact of mobile sink speed on the perfor­mance of wireless sensor networks,” Journal of Information & Communication Tech­nology, vol. 1, no. 2, pp. 49–55, 2007. 2007
968 K. S. Karimov, M. M. Ahmed, S. A. Moiz, P. Babadzhanov, R. Marupov, and M. A. Turaeva, “Electrical properties of organic semiconductor orange nitrogen dye thin films deposited from solution at high gravity,” Eurasian Chemico-Technological Journal, vol. 5, no. 2, pp. 109–113, 2007. 2007
969 N. M. Memon, M. M. Ahmed, and F. Rehman, “A comprehensive four parameters I−V model for GaAs MESFET output characteristics,” Solid-State Electronics, vol. 51, no. 3, pp. 511–516, 2007. 1.422 2007
970 S. A. Moiz, M. M. Ahmed, K. S. Karimov, and M. Mehmood, “Temperature-dependent current-voltage characteristics of poly-N-epoxypropylcarbazole complex,” Thin Solid Films, vol. 516, no. 1, pp. 72–77, 2007. 1.771 2007
971 F. U. Rehman, M. M. Ahmed, and N. Ahmed, “Steering control algorithm for drift-free control systems using model decomposition: a wheeled mobile robot of type (1, 1) example,” International Journal of Robotics & Automation, vol. 22, no. 4, p. 313, 2007. 0.409 2007
972 M. M. Ahmed and S. A. Moiz, “Steering algorithm for drift free control systems,” Communications in Applied Analysis, vol. 11, no. 3-4, pp. 485–514, 2007. 2007
973 F. U. Rehman and M. M. Ahmed, “Steering control algorithm for a class of wheeled mobile robots,” IET Control Theory & Applications, vol. 1, no. 4, pp. 915–924, 2007. 1.07 2007
974 O. Abdul Hamid, M. Abdul Qadir, N. Iftikhar, M. Ur Rehman, M. Uddin Ahmed, and I. Ihsan, “Generic multimedia database architecture based upon semantic libraries,” Informatica, vol. 18, no. 4, pp. 483–510, 2007. 0.734 2007
975 B. Shahzad and M. Afzal, “Enhanced shell sorting algorithm,” Computer Journal of Enformatika, vol. 21, no. 6, pp. 66–70, 2007. 2007
976 S. Ali, L. C. Briand, M. J.-U. Rehman, H. Asghar, M. Z. Z. Iqbal, and A. Nadeem, “A state-based approach to integration testing based on UML models,” Information and Software Technology, vol. 49, no. 11, pp. 1087–1106, 2007. 1.2 2007
977 M. A. Qadir and I. Ahmad, “Digital text watermarking: Secure content delivery and data hiding in digital documents,” IEEE Aerospace and Electronic Systems Magazine, vol. 21, no. 11, 2006. 0.231 2006
978 S. Hijazi and S. Naqvi, “Factors affecting student’s performance: A case of private colleges,” Bangladesh e-Journal of Sociology, vol. 3, no. 1, pp. 12–17, 2006. 2006
979 S. A. Moiz, M. M. Ahmed, and K. S. Karimov, “Effects of temperature and humid­ity on electrical properties of organic semiconductor orange dye films deposited from solution,” Japanese Journal of Applied Physics, vol. 44, no. 3, pp. 1199–1203, 2005. 1.22 2005
980 Y. Zafar and M. M. Ahmed, “A novel FPGA compliant micropipeline,” IEEE Trans­actions on Circuits and Systems II: Express Briefs, vol. 52, no. 9, pp. 611–615, 2005. 1.663 2005
981 K. S. Karimov, M. M. Ahmed, S. A. Moiz, and M. I. Fedorov, “Temperature-dependent properties of organic-on-inorganic Ag/p-CuPc/n-GaAs/Ag photoelectric cell,” Solar Energy Materials and Solar Cells, vol. 87, no. 1, pp. 61–75, 2005. 2.788 2005
982 A. Nadeem and M. J.-U. Rehman, “TESTAF: A test automation framework for class testing using object-oriented formal specifications,” Journal of Universal Computer Science, vol. 11, no. 6, pp. 962–985, 2005. 1.488 2005
983 A. Nadeem and M. Y. Javed, “An empirical analysis of secret key encryption algo­rithms,” Teknologix Journal, 2005. 2005
1