PROFILE SUMMARY

Dr. Majid Ali has an overall 20 years of rich teaching, research and professional industry experience with a total of around 214 publications including 38 Impact Factor journal papers having cumulative ISI impact factor of 229. He is basically a civil engineer (Professional Engineer, Pakistan Engineering Council, PEC) having qualifications of bachelors with gold medal, masters with highest position and doctor of philosophy with five impact factor journal publications. He is an HEC (Higher Education Commission Pakistan) Approved PhD Supervisor. He is an active reviewer for many RD funding proposals etc for National Science Centre Poland, Elsevier (one of world’s largest publisher), KU Leuven (Belgium), HEC and Pakistan Science Foundation. He was included in list of Young Productive Scientists of Pakistan. He acted as program evaluator from PEC for the accreditation of bachelors of civil engineering and allied disciplines at various institutes across country. He has been a member of engineering curriculum review and development committee for updating civil engineering national curriculum on outcome-based education. He is also convener of University Health, Safety and Security Committee at CUST. Before joining academia, he worked as structural design engineer having ten years of association with NESPAK, one of leading consultants of Pakistan.

QUALIFICATION
PhD	Seismic-Resistant Housing (Natural Fibre Concrete)	The University of Auckland, New Zealand	2013
MSc	Structures	University of Engineering and Technology, Taxila, Pakistan	2006

TEACHING EXPERIENCE
Professor	Capital University of Science and Technology Islamabad	Since – 2020
Associate Professor	Capital University of Science and Technology Islamabad	2016 – 2019
Assistant Professor	Capital University of Science and Technology Islamabad	2015 – 2016
Assistant Professor	Mohammad Ali Jinnah University, Islamabad	2014 – 2015

INDUSTRIAL EXPERIENCE
Senior Engineer	Structure Section, NESPAK Islamabad Office	2007 – 2014
Engineer	Structure Section, NESPAK Islamabad Office	2004 – 2007

MEMBERSHIP OF PROFESSIONAL BODIES
PEC	Pakistan Engineering Council (PEC)

RESEARCH AREAS / INTERESTS
1.	Seismic-resistant design
2.	New construction technologies for seismic-resistant housing
3.	Use of natural fibers as construction materials
4.	Natural fiber reinforced concrete

RESEARCH SUPERVISION
1.	PhD	Utilization of natural fibrous plaster for lateral resistance of masonry walling (University of Warwick, UK; in co-supervision)
2.	PhD	MultiScale Hybrid Fiber Reinforced Concrete using Steel Fiber, Basalt Fiber and CaCO3 Whisker (Dalian University of Technology, China; in co-supervision)
3.	PhD	Characterization of waste plastic as construction material for selected building products in housing
4.	PhD	Optimization and durability of hybrid fiber reinforced concrete for canal lining
5.	PhD	Development of solid interlocking blocks from recycled plastic for housing
6.	PhD	Development of hollow interlocking blocks from recycled plastic for housing
7.	PhD	Construction waste management
8.	PhD	Fire damaged beams (Brunel University London, UK; in co-supervision)
9.	MS	Evaluation of Critical Factors Leading to Cost Overrun in Building Projects using Structural Equation Modeling
10.	MS	Properties of Sustainable Concrete having Banana Fiber and Banana Leaf Ash for Enhanced Performance of Rigid Pavement
11.	MS	Development of Bendable Composite Using Local Materials and Its Potential for Structural Elements
12.	MS	Evaluation of Critical Factors Leading to Cost Overrun in Building Projects using Structural Equation Modeling
13.	MS	Optimization of Rice Husk Ash and Eggshell Powder to Enhance Mechanical and Dynamic Properties of Cellular Lightweight Concrete
14.	MS	Effect of pine needles and plastic fibers on concrete performance
15.	MS	Strength regain of damaged bendable composite with carbon fiber reinforced polymer sheets
16.	MS	Identification of an Efficient Method for Practicing Designers to Incorporate Soil Structure Interaction Effects
17.	MS	Developing a Framework of Sustainability Indicators for Small-Scale Construction Projects by Private Contractors in Pakistan
18.	PhD	Potential Utilization of Wheat Straw in Concrete for Pavement Applications from Engineering Perspectives
19.	PhD	Precipitation variability in connection with various potential determinants
20.	MS	Seismic Performance of Unreinforced and Reinforced Brick Masonry Structures by Numerical Modeling for Design Optimization
21.	MS	Experimental Properties Evaluation of Fiber Reinforced Concrete related to Canal-lining
22.	MS	Comparison of Plain Concrete and Glass-Fiber Reinforced Concrete Beams With Different Flexural and Shear Reinforcement.
23.	MS	Reduction of Reinforcement Using Jute Fiber Reinforced Concrete in Slabs under Impact Loading
24.	MS	Feasibility of Natural Fiber Reinforced Stabilized-Earth-Brick in Masonry to Promote Sustainability
25.	MS	Investigation on Concrete Slab having Jute Fibers and GFRP Rebars for Bridge Deck Application
26.	MS	Effect of Freeze-Thaw Cycles on Mechanical Properties of Jute Fiber Reinforced Concrete for Pavement
27.	MS	Experimental Investigation on Properties of Fiber Reinforced Concrete Related to Bridge Piers
28.	MS	Comparative Analysis and Design of Elevated Water Tank using Conventional and BIM Approach
29.	MS	Investigation of Jute Fiber Reinforced Concrete Having GFRP Rebars in Slabs Under Impact Loading
30.	MS	Dynamic Behavior of Prototype Interlocking Plastic-block Structure Using Locally Developed Low-cost Shake Table
31.	MS	Effect of Jute Fibers and Glass Fiber Reinforced Polymer Rebars in Concrete for Bridge Girder Applications
32.	MS	Model Updating for a Simple Structure against Impact Loading
33.	MS	Behavior of Jute Fiber Reinforced Concrete having Glass Fiber Reinforced Polymer Rebars for Possible Application in Bridge Pier
34.	MS	Use of Jute Fibre Reinforced Concrete having GFRP Rebars in Thin Shear Wall to Avoid Catastrophic Failure
35.	MS	Optimization of Jute Fibre Content in Concrete Slabs having GFRP Rebars against Impact Loading
36.	MS	Effect of Diaphragm on Dynamic Behavior of Interlocking Plastic-Block Structure with Different Elements Pattern
37.	MS	Dynamic Response of Interlocking Plastic-Block Walls with Diaphragm using Numerical Approach
38.	MS	Consequences of Block-Return on Dynamic In-Plane Behavior of Interlocking Plastic Block Walls
39.	MS	Compressive Behavior of Interlocking Plastic Block Structural Elements
40.	MS	Impact Resistance of Concrete Wall having Jute Fibers and GFRP Rebars
41.	MS	Effect of Block-Return on Out-of-Plane Behavior of Interlocking Plastic-Block Walls under Harmonic Loading
42.	MS	Out-of-plane Behavior of Prototype Interlocking Plastic-block Wall with Opening Under Harmonic Loading
43.	MS	Out-of-plane Behavior of Prototype Interlocking Plastic-block Solid Wall Under Harmonic Loading
44.	MS	Improvement in Properties of Concrete using Hybrid Fiber and Ground Granulated Blast Furnace Slag
45.	MS	Effectiveness of Jute Fibers and GFRP Rebars on the Structural Behavior of Concentric Rectangular Concrete Columns
46.	MS	Structural Behavior of Eccentric Square Columns having Jute Fibre Reinforced Concrete and GFRP Rebars
47.	MS	Numerical Study of Far and Near-Fault Ground Motion Effects on Elevated Water Tank
48.	MS	Mechanical, Dynamic and Absorption Properties of Hybrid Fiber Reinforced Concrete for Rigid Pavements Application
49.	MS	Comparison of different structural systems with regard to given seismic forces for a given building (UET Taxila, Pakistan; Role: Industry Advisor)
50.	MS	Comparison Between Static and Dynamic Analysis of Multistory Structures (UET Taxila, Pakistan; Role: Industry Advisor)
51.	MS	Comparative study of seismic analysis of regular and irregular multistory building (UET Taxila, Pakistan; Role: Industry Advisor)
52.	MS	Comparative Studies of Special Moment Resisting Frames And Intermediate Moment Resisting Frames I n Moderate Seismic Zones (UET Taxila, Pakistan; Role: Industry Advisor)
53.	MS	Computer Aided Analysis and Design of Multi Story Building with Different Soil Conditions in Different Seismic Zones (UET Taxila, Pakistan; Role: Industry Advisor)
54.	MS	Effect of Structure Period on Earthquake Resistance of Reinforced Concrete Structures (UET Taxila, Pakistan; Role: Industry Advisor)
55.	MS	Comparative Study of Analysis and Design of High Rise Building With and Without Shear Wall (UET Taxila, Pakistan; Role: Industry Advisor)
56.	MS	Influence of diaphragm acting upon seismic response of high rise moment resisting building frames (UET Taxila, Pakistan; Role: Industry Advisor)
57.	MS	Analysis of Lattice Structures Based on Changed Earthquake Criteria Prevalent in the Area and its Utilization (UET Taxila, Pakistan; Role: Industry Advisor)
58.	MS	Comparison of Effect of Wind and Earthquake Forces on High‐Rise Buildings With Seismic Design Provisions (UET Taxila, Pakistan; Role: Industry Advisor)
59.	MS	Comparison of Seismic Response of a Building for Different Categories of Underlying Soil (UET Taxila, Pakistan; Role: Industry Advisor)
60.	MS	Identification of an Efficient Method for Practicing Designers to Incorporate Soil-Structure Interaction Effects
61.	MS	Sustainable Framework on Hybrid Fiber Reinforced Concrete to Control water losses in Canal Lining
62.	MS	Capacity of CFRC interlocking blocks (The University of Auckland, New Zealand; Role: Academic Advisor)
63.	MS	Properties of concrete having used petrol-engine oil and assorted proportions of banana fibers
64.	MS	Dynamic analysis of confined brick masonry structure
65.	MS	Improvement in behavior of RC beam-column joint with jute fibers and GFRP rebars
66.	MS	Optimization of locally available jute fibers as discrete reinforcement for concrete
67.	MS	Axial capacity of circular jute fiber-reinforced-concrete columns having GFRP rebars
68.	MS	Influence of banana fiber and used diesel engine oil in mechanical properties of concrete
69.	MS	Mechanical, dynamic and absorption properties of concrete with hybrid natural fibers of varying lengths
70.	MS	Influence of varying length hybrid fibers and ground granulated blast furnace slag on properties of concrete
71.	MS	Impact of COVID-19 on local construction industry and challenges to manage resources within projects during pandemic condition
72.	MS	Comparative analysis of delay assessment technique on the real-life contract application
73.	MS	BIM based energy management for sustainable facility management
74.	MS	Effect of slenderness on the behavior of interlocking plastic-block structural elements under compression
75.	MS	Properties of concrete having used petrol-engine oil and varying lengths of banana fibers (Status: In progress)
76.	MS	Comparative life cycle assessment of as-planned and as-built commercial building in Pakistan (Status: In progress)
77.	MS	Properties and life cycle assessment of conventional concrete having steel fibers and recycled pet bottle particles (Status: In progress)
78.	MS	Structural response of rigid pavement designed using properties of sustainable concrete having banana fiber and banana leaf ash (Status: In progress)
79.	MS	Impact of freeze-thaw on mechanical properties of concrete having hybrid fibers for pavement application (Status: In progress)
80.	MS	Evaluating mechanical properties of rubberized concrete containing tire crumb rubber as fine aggregate replacement (Status: In progress)

SR.	JOURNAL PUBLICATIONS	YEAR
1	M. Sudheer and M. Ali, “Dynamic response of an interlocking plastic-block wall with opening,” Journal of Mechanics of Materials and Structures, vol. 19, no. 4, pp. 595–613, 2024.	2024
2	M. U. Farooqi and M. Ali, “Durability evaluation of wheat straw reinforced concrete for sustainable structures,” Journal of Building Engineering, vol. 82, p. 108400, 2024.	2024
3	M. D. Ali, W. Akram, and M. Ali, “Pine needle reinforcement in concrete: A sustainable approach for enhancing mechanical properties,” Technical Journal, vol. 3, no. ICACEE, pp. 66–72, 2024.	2024
4	A. Ullah and M. Ali, “Improving the design and performance of rigid pavements with fiber concrete,” Technical Journal, vol. 3, no. ICACEE, pp. 194–199, 2024.	2024
5	W. Akram and M. Ali, “Flexural characteristics of pine needle reinforced concrete,” Technical Journal, vol. 3, no. ICACEE, pp. 200–206, 2024.	2024
6	R. Ahmad and M. Ali, “Behavior of fiber reinforced concrete to enhance concrete block, pavers and kerbstones performance,” Technical Journal, vol. 3, no. ICACEE, pp. 207–212, 2024.	2024
7	W. Akram and M. Ali, “Flexural characteristics of pine needle reinforced concrete,” Technical Journal, vol. 3, no. ICACEE, pp. 200–206, 2024.	2024
8	N. Shah and M. Ali, “Exploring pine needle fibers in concrete to mitigate flexural spalling in rigid pavements,” Technical Journal, vol. 3, no. ICACEE, pp. 415–420, 2024.	2024
9	Y. Khan and M. Ali, “PNRC sustainable production of manholes covers with fiber concrete,” Technical Journal, vol. 3, no. ICACEE, pp. 996–1002, 2024.	2024
10	M. Ali et al., “Improving performance of concrete in canal-lining by using pine needle fibres,” Technical Journal, vol. 3, no. ICACEE, pp. 1003–1009, 2024.	2024
11	S. Arshad, R. Ahmad, and M. Ali, “Optimizing RCC slabs using compressive strength of fiber reinforced composites,” Technical Journal, vol. 3, no. ICACEE, pp. 1010–1015, 2024.	2024
12	N. Shahzad, A. Ullah, and M. Ali, “Improving the concrete slab insulation by using pine needle fiber,” Technical Journal, vol. 3, no. ICACEE, pp. 1016–1021, 2024.	2024
13	K. Batool, B. Alshameri, F. Raza, A. Haider, and M. Ali, “Normalization of geotechnical sustainability assessment tool (GEO-SAT) using multiple criteria decision analysis for dams,” Environment, Development and Sustainability, pp. 1–35, 2023.	2023
14	S. Ahmed and M. Ali, “Potential applications of different forms of recycled plastics as construction materials—a review,” Engineering Proceedings, vol. 53, no. 1, p. 5, 2023.	2023
15	A. Sikandar and M. Ali, “Composition of engineered cementitious composite with local materials, composite properties and its utilization for structures in developing countries,” Engineering Proceedings, vol. 53, no. 1, p. 16, 2023.	2023
16	Z. Khan and M. Ali, “Learning from past research for a green future: Harnessing organic and genetically enhanced trees to reduce construction-induced CO2 emissions,” Engineering Proceedings, vol. 53, no. 1, p. 30, 2023.	2023
17	M. U. Shahid and M. Ali, “An insight into the enablers for waste management culture in the construction sector,” Engineering Proceedings, vol. 53, no. 1, p. 35, 2023.	2023
18	M. H. Zahoor and M. Ali, “Assessment of critical success factors for building projects through the literature,” Engineering Proceedings, vol. 53, no. 1, p. 45, 2023.	2023
19	M. Shah and M. Ali, “Fresh properties of concrete having banana leaf ash and banana fibres,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 88–95, 2023.	2023
20	S. A. Janjua and M. Ali, “A review on properties of concrete having crumb rubber as partial replacement of fine aggregates,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 42–48, 2023.	2023
21	M. A. Javaid and M. Ali, “Influence of waste PET bottle particles and steel fibers on fresh properties of concrete,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 49–57, 2023.	2023
22	M. U. Shahid and M. Ali, “An overview of construction waste management,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 121–126, 2023.	2023
23	T. Ahmad, N. Shaheen, and M. Ali, “A review of sustainability indicators for small-scale construction projects by private contractors,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 2, pp. 32–41, 2023.	2023
24	B. Hasan and M. Ali, “Potential of used-petrol-engine-oil as an admixture in cement composites: A detailed review,” in AIP Conference Proceedings, vol. 2713, no. 1, AIP Publishing, 2023.	2023
25	Z. U. Abideen and M. Ali, “Effects of the combined use of banana fiber and used-diesel-engine oil on the workability of concrete,” in AIP Conference Proceedings, vol. 2713, no. 1, AIP Publishing, 2023.	2023
26	Shah, M., and Ali, M. “Study on Mechanical Properties of Environment Friendly Concrete Incorporating Banana Fiber and Banana Leaf Ash,” Engineering Proceedings, vol. 53, no. 1, 2023.	2023
27	Ahmed, S., and Ali, M. “Mortarless Structures with Hollow Interlocking Blocks – A Comprehensive Review,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 96-100, 2023.	2023
28	Rehman, A. U., and Ali, M. “An Overview on Use of Waste Plastic for Soil Stabilization,” Sustainable Structures and Materials, An International Journal, vol. 6, no. 1, pp. 64-67, 2023.	2023
29	M. U. Farooqi and M. Ali, “A Study on Natural Fibre Reinforced Concrete from Materials to Structural Applications,” Arabian Journal for Science and Engineering, vol. 48, no. 4, pp. 4471–4491, 2023.	2023
30	M. Adnan, F. Khalid, and M. Ali, “Compressive Behavior of Interlocking Plastic Blocks Structural Elements Having Slenderness,” Buildings, vol. 12, no. 12, p. 2257, 2022.	2022
31	M. Khan, M. Cao, C. Xie, and M. Ali, “Effectiveness of Hybrid Steel-Basalt Fiber Reinforced Concrete under Compression,” Case Studies in Construction Materials, vol. 16, p. e00941, 2022.	2022
32	M. Affan and M. Ali, “Experimental Investigation on Mechanical Properties of Jute Fiber Reinforced Concrete under Freeze-Thaw Conditions for Pavement Applications,” Construction and Building Materials, vol. 323, p. 126599, 2022.	2022
33	M. Khan, M. Cao, S. Chu, and M. Ali, “Properties of Hybrid Steel-Basalt Fiber Reinforced Concrete Exposed to Different Surrounding Conditions,” Construction and Building Materials, vol. 322, p. 126340, 2022.	2022
34	A. A. Shah and M. Ali, “An Overview on the Need for Automatic Structural Detailing of Area Elements in BIM Tools,” Engineering Proceedings, vol. 22, no. 1, p. 23, 2022.	2022
35	S. Ahmed and M. Ali, “Performance Evaluation of Jute-Fiber-Reinforced Concrete Walls with GFRP Reinforcement for Impact Energy Dissipation,” Engineering Proceedings, vol. 22, no. 1, p. 21, 2022.	2022
36	S. S. Khan and M. Ali, “Short-Term and Long-Term Needs for Sustainable Concrete—An Overview,” Engineering Proceedings, vol. 22, no. 1, p. 14, 2022.	2022
37	S. S. Khan and M. Ali, “Short-Term and Long-Term Needs for Sustainable Concrete—An Overview,” Engineering Proceedings, vol. 22, no. 1, p. 14, 2022.	2022
38	M. Khan, M. Cao, C. Xie, and M. Ali, “Hybrid Fiber Concrete with Different Basalt Fiber Length and Content,” Structural Concrete, vol. 23, no. 1, pp. 346–364, 2022.	2022
39	M. Khan, M. Cao, X. Chaopeng, and M. Ali, “Experimental and Analytical Study of Hybrid Fiber Reinforced Concrete Prepared with Basalt Fiber under High Temperature,” Fire and Materials, vol. 46, no. 1, pp. 205–226, 2022.	2022
40	M. Khan, M. Cao, C. Xie, and M. Ali, “Hybrid Fiber Concrete with Different Basalt Fiber Length and Content,” Structural Concrete, vol. 23, no. 1, pp. 346–364, 2022.	2022
41	M. Khan, M. Cao, X. Chaopeng, and M. Ali, “Experimental and Analytical Study of Hybrid Fiber Reinforced Concrete Prepared with Basalt Fiber under High Temperature,” Fire and Materials, vol. 46, no. 1, pp. 205–226, 2022.	2022
42	M. Khan, M. Cao, C. Xie, and M. Ali, “Efficiency of Basalt Fiber Length and Content on Mechanical and Microstructural Properties of Hybrid Fiber Concrete,” Fatigue & Fracture of Engineering Materials & Structures, vol. 44, no. 8, pp. 2135–2152, 2021.	2021
43	A. Afraz and M. Ali, “Effect of Banana Fiber on Flexural Properties of Fiber Reinforced Concrete for Sustainable Construction,” Engineering Proceedings, vol. 12, no. 1, p. 63, 2021.	2021
44	A. Zaman, F. Khalid, and M. Ali, “Provisions of Sustainability in Structural Design Approaches in Different Codes,” Key Engineering Materials, vol. 896, pp. 149–155, 2021.	2021
45	H. U. Din, I. Waris, O. B. Rizwan, and M. Ali, “Energy Dissipation in 3D Structure Having Multiple Uplifts During Dynamic Loading,” Arabian Journal for Science and Engineering, vol. 46, pp. 4503–4520, 2021.	2021
46	M. Khan and M. Ali, “Optimization of Concrete Stiffeners for Confined Brick Masonry Structures,” Journal of Building Engineering, vol. 32, p. 101689, 2020.	2020
47	S. Ahmed and M. Ali, “Use of Agriculture Waste as Short Discrete Fibers and Glass-Fiber-Reinforced-Polymer Rebars in Concrete Walls for Enhancing Impact Resistance,” Journal of Cleaner Production, vol. 268, p. 122211, 2020.	2020
48	M. Khan, M. Cao, and M. Ali, “Cracking Behaviour and Constitutive Modelling of Hybrid Fibre Reinforced Concrete,” Journal of Building Engineering, vol. 30, p. 101272, 2020.	2020
49	M. Khan, A. Rehman, and M. Ali, “Efficiency of Silica-Fume Content in Plain and Natural Fiber Reinforced Concrete for Concrete Road,” Construction and Building Materials, vol. 244, p. 118382, 2020.	2020
50	F. Qamar, T. Thomas, and M. Ali, “Improvement in Lateral Resistance of Mortar-Free Interlocking Wall with Plaster Having Natural Fibres,” Construction and Building Materials, vol. 234, p. 117387, 2020.	2020
51	M. U. Farooqi and M. Ali, “Effect of Pre-Treatment and Content of Wheat Straw on Energy Absorption Capability of Concrete,” Construction and Building Materials, vol. 224, pp. 572–583, 2019.	2019
52	F. Qamar, T. Thomas, and M. Ali, “Assessment of Mechanical Properties of Fibrous Mortar and Interlocking Soil Stabilised Block (ISSB) for Low-Cost Masonry Housing,” Materiales de Construcción, vol. 69, no. 336, pp. e201–e201, 2019.	2019
53	T. Hussain and M. Ali, “Improving the Impact Resistance and Dynamic Properties of Jute Fiber Reinforced Concrete for Rebars Design by Considering Tension Zone of FRC,” Construction and Building Materials, vol. 213, pp. 592–607, 2019.	2019
54	M. Khan and M. Ali, “Improvement in Concrete Behavior with Fly Ash, Silica-Fume and Coconut Fibres,” Construction and Building Materials, vol. 203, pp. 174–187, 2019.	2019
55	M. Khan, M. Cao, and M. Ali, “Effect of Basalt Fibers on Mechanical Properties of Calcium Carbonate Whisker-Steel Fiber Reinforced Concrete,” Construction and Building Materials, vol. 192, pp. 742–753, 2018.	2018
56	M. Khan and M. Ali, “Effect of Super Plasticizer on the Properties of Medium Strength Concrete Prepared with Coconut Fiber,” Construction and Building Materials, vol. 182, pp. 703–715, 2018.	2018
57	M. U. Farooqi and M. Ali, “Contribution of Plant Fibers in Improving the Behavior and Capacity of Reinforced Concrete for Structural Applications,” Construction and Building Materials, vol. 182, pp. 94–107, 2018.	2018
58	F. Qamar, T. Thomas, and M. Ali, “Use of Natural Fibrous Plaster for Improving the Out of Plane Lateral Resistance of Mortarless Interlocked Masonry Walling,” Construction and Building Materials, vol. 174, pp. 320–329, 2018.	2018
59	M. Khan and M. Ali, “Effectiveness of Hair and Wave Polypropylene Fibers for Concrete Roads,” Construction and Building Materials, vol. 166, pp. 581–591, 2018.	2018
60	M. Ali, “Role of Post-Tensioned Coconut-Fibre Ropes in Mortar-Free Interlocking Concrete Construction during Seismic Loadings,” KSCE Journal of Civil Engineering, vol. 22, no. 4, pp. 1336–1343, 2018.	2018
61	A. Zia and M. Ali, “Effectiveness of Polypropylene Fiber Reinforced Concrete in Enhancement of Long-Term Durability of Hydraulic Structures,” in Materials Science Forum, vol. 923. Trans Tech Publ, 2018, pp. 125–129.	2018
62	M. U. Farooqi and M. Ali, “Effect of Fibre Content on Splitting-Tensile Strength of Wheat Straw Reinforced Concrete for Pavement Applications,” Key Engineering Materials, vol. 765, pp. 349–354, 2018.	2018
63	U. A. Khan, H. M. Jahanzaib, M. Khan, and M. Ali, “Improving the Tensile Energy Absorption of High Strength Natural Fiber Reinforced Concrete with Fly-Ash for Bridge Girders,” Key Engineering Materials, vol. 765, pp. 335–342, 2018.	2018
64	F. Qamar, T. Thomas, and M. Ali, “Contribution of Sisal Reinforced Plaster in Out of Plane Resistance of Masonry Column,” Key Engineering Materials, vol. 765, pp. 343–348, 2018.	2018
65	A. Zia and M. Ali, “Behavior of Fiber Reinforced Concrete for Controlling the Rate of Cracking in Canal-Lining,” Construction and Building Materials, vol. 155, pp. 726–739, 2017.	2017
66	M. Khan and M. Ali, “Use of Glass and Nylon Fibers in Concrete for Controlling Early Age Micro Cracking in Bridge Decks,” Construction and Building Materials, vol. 125, pp. 800–808, 2016.	2016
67	M. Ali, “Use of Coconut Fibre Reinforced Concrete and Coconut-Fibre Ropes for Seismic-Resistant Construction,” Materiales de Construccion, vol. 66, no. 321, pp. e073–e073, 2016.	2016
68	Z. Tang, M. Ali, and N. Chouw, “Residual Compressive and Shear Strengths of Novel Coconut-Fibre-Reinforced-Concrete Interlocking Blocks,” Construction and Building Materials, vol. 66, pp. 533–540, 2014.	2014
69	M. Ali, “Seismic Performance of Coconut-Fibre-Reinforced-Concrete Columns with Different Reinforcement Configurations of Coconut-Fibre Ropes,” Construction and Building Materials, vol. 70, pp. 226–230, 2014.	2014
70	M. Ali, R. Briet, and N. Chouw, “Dynamic Response of Mortar-Free Interlocking Structures,” Construction and Building Materials, vol. 42, pp. 168–189, 2013.	2013
71	M. Ali and N. Chouw, “Experimental Investigations on Coconut-Fibre Rope Tensile Strength and Pullout from Coconut Fibre Reinforced Concrete,” Construction and Building Materials, vol. 41, pp. 681–690, 2013.	2013
72	M. Ali, X. Li, and N. Chouw, “Experimental Investigations on Bond Strength Between Coconut Fibre and Concrete,” Materials & Design, vol. 44, pp. 596–605, 2013.	2013
73	M. Ali, R. J. Gultom, and N. Chouw, “Capacity of Innovative Interlocking Blocks Under Monotonic Loading,” Construction and Building Materials, vol. 37, pp. 812–821, 2012.	2012
74	M. Ali, A. Liu, H. Sou, and N. Chouw, “Mechanical and Dynamic Properties of Coconut Fibre Reinforced Concrete,” Construction and Building Materials, vol. 30, pp. 814–825, 2012.	2012
75	M. Ali, “Natural Fibres as Construction Materials,” Materials and Technologies (NOCMAT 2009), vol. 6, p. 9, 2009.	2009

SR.	CONFERENCE PUBLICATIONS	YEAR
1	Shahzad, N., and Ali, M. “Enhancing building Insulation with Fibre Concrete on Roof - a Research review”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 40. 2023	2023
2	Khalid, M.S.U.R., and Ali, M. “An Overview on The Behavior of Fiber Reinforced Concrete for Controlling the Rate of Cracking in Canal Lining”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 39. 2023	2023
3	Shah, N., and Ali, M. “An Insight into Pavement Maintenance with Fiber Concrete Overlays”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 36. 2023	2023
4	Khan, Y., and Ali, M. “Economizing manhole covers with fiber reinforced concrete A review”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 35. 2023	2023
5	Ali, M.D., and Ali, M. “The study of column shrinkage and solution with fiber reinforced composites”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 34. 2023	2023
6	Akram, W., and Ali, M. “Considering Fiber Reinforced Concrete Below Neutral Axis of Beam for Shallow Sections - A Review”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 32. 2023	2023
7	Ullah, A., and Ali, M. “A Review on Improving the Design and Performance of Rigid Pavements with Fiber Concrete”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 31. 2023	2023
8	Amir, M., and Ali, M. “Utilization of Sustainable and Smart Materials in Slender Shear Walls- A Deep Insight”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 30. 2023	2023
9	Ahmed, R., and Ali, M. “A Review on Introducing Fibers in Concrete for Blocks, Pavers and Kerbstone”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 28. 2023	2023
10	Haider, M., and Ali, M. “An Overview on Utilization of Fibers in Precast Members”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 27. 2023	2023
11	Arshad, S., and Ali, M. “Optimizing Slab Thickness by Enhancing Concrete Flexural Capacity Using FRC-An Overview”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 26. 2023	2023
12	Khan, Z., and Ali, M. “An Overview on Tapping the Potential of Treated Waste Water for Concrete Curing to Ensure Sustainability”. International Conference on Technology-Enabled Civil Infrastructure Engineering and Management (TECH-IEM), NED-UET Karachi, Pakistan. December 15-16. Paper 25. 2023	2023
13	Khattak, S.U., and Ali, M. “Solid Interlocking blocks of different materials for sustainable construction: A review”. 13th International Civil Engineering Conference (ICEC2023) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. November 10-11. Paper 16. 2023	2023
14	M. H. Zahoor, N. Shaheen, and M. Ali, “Identification of critical factors leading to cost overrun in building projects based on literature research,” 2023	2023
15	Das, A. J., and Ali, M. “Development of Effective Technique for Recycling Waste Plastic for Sustainable Building Products”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 854. 2023	2023
16	Sikander, A., and Ali, M. “A Review on Different Materials Composition of Engineered Cementitious Composites, Micromechanics and Structural Applications.”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 852. 2023	2023
17	Ahmed, S., and Ali, M. “An Overview on Role of Different Joints in Mortar-free Interlocking Structures.”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 851. 2023	2023
18	Shahid, M. U., and Ali, M. “Circular Economy Practices in Construction Industry- A Critical Review.”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 846. 2023	2023
19	Khan, Z., and Ali, M. “A New Insight from Literature on Microbe-Assisted Self Healing of Concrete Micro Cracks.”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 844. 2023	2023
20	Zahoor, M. H., and Ali, M. “An Overview on Tools for Assessment of Cost Overrun Factors in Construction Projects.”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-21. Paper 842. 2023	2023
21	Amjid, A., and Ali, M. “Impact of Artificial and Natural Fibre Hybridization on Properties of Fresh Concrete”. 2nd International Conference on Advances in Civil & Environmental Engineering (ICACEE 2023), Taxila Pakistan. February 22-23. Paper 117. 2023	2023
22	Jabbar, J., and Ali, M. “Water absorption of concrete having PVC and glass mix”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 768. 2022	2022
23	Ahmed, S., and Ali, M. “An overview on gravity load carrying capacity and lateral load resistance of interlocking block structures”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 754. 2022	2022
24	Yaseen, F., Qadeer, A., and Ali, M. “An overview of Construction projects to deal with COVID-19”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 740. 2022	2022
25	Ahmed, U., Ahmed, T., and Ali, M. “A review on compressive behaviour of cotton fiber reinforced concrete columns”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 263. 2022	2022
26	Ahmed, U., Ahmed, T., and Ali, M. “Workability of cotton yarn fibre reinforced concrete for easy pouring”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 262. 2022	2022
27	Ahmed, T., Ahmed, U., and Ali, M. “Potential of hemp fibre in improving the performance of concrete canal-lining”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 261. 2022	2022
28	Khan, S.R., and Ali, M. “An Overview on Relation Between Energy and Facility Management Models Using BIM Tools”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 694. 2022	2022
29	Ali, M.A., and Ali, M. “An overview on selection of appropriate delay analysis technique”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 667. 2022	2022
30	Illyas, H., and Ali, M. “Dynamic properties of structure using snapback test”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 653. 2022	2022
31	Adnan, M., Khalid, F., and Ali, M. “An overview on the compressive behaviour of mortar free slender wall”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 650. 2022	2022
32	Arshad, A., and Ali, M. “A critique on non-automation of seismic design of RCC members from forces calculation to rebars detailing in BIM tools”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 401. 2022	2022
33	Jabbar, J., and Ali, M. “An overview on improvement of concrete properties with wastes”. 1st International Conference on Engineering and Applied Natural Sciences (ICEANS2022), Konya, Turkey. May 10-13. Paper 317. 2022	2022
34	Abbas, S.A., and Ali, M. “Potential of Wastes as possible Construction Materials: A Review”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 6731. 2022	2022
35	Khan, M.J., and Ali, M. “A review on the correlation between damage stages in structure lifespan and structural health monitoring”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 6640. 2022	2022
36	Rafi, G., and Ali, M. “Effect of Jute Fibers on Behavior of RC Beam Column Joint”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 5334. 2022	2022
37	Rehman, A., and Ali, M. “An overview on different cross-sectional shapes of canal and their characteristics”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 4516. 2022	2022
38	Khattak, S.U., and Ali, M. “Different Aspects of Interlocking Blocks Geometry: From Literature Perspective”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 4267. 2022	2022
39	Abideen, Z.U., and Ali, M. “Improvement in damping of concrete with combined effects of banana fibers and used-diesel-engine-oil”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 4045. 2022	2022
40	Abrar, M., and Ali, M. “Damping of Hybrid Natural Fiber Reinforced Concrete”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 3777. 2022	2022
41	Hasan, B., and Ali, M. “Behavior of SMRF and IMRF RC Building During Earthquake – A Review”. 12th International Civil Engineering Conference (ICEC2022) “Integrating Technology in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. May 13-14. Paper 0362. 2022	2022
42	Das, A. J., and Ali, M. “Flexural Capacity of Recycled Plastic Corrugated Sheet”. 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), Taxila Pakistan. February 22-23. Paper 178. 2022	2022
43	A. Shah and M. Ali, “An overview on the need for automatic structural detailing of area elements in bim tools,” Engineering Proceedings, vol. 22, no. 1, p. 23, 2022.	2022
44	Ilyas, H., and Ali, M. “Low price instrumentations for structural health monitoring – A review”. 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), Taxila Pakistan. February 22-23. Paper 148. 2022	2022
45	Ullah, S., and Ali, M. “Economization of Stiffeners Considering Near-Fault Ground Motion Effects on Confined Brick Masonry Structures”. 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), Taxila Pakistan. February 22-23. Paper 132. 2022	2022
46	Ali, W., Khalid, S., Saad, M.S., Sudheer, M., and Ali, M. “Sustainable Concrete: A review”. 1st International Conference on Advances in Civil & Environmental Engineering (ICACEE 2022), Taxila Pakistan. February 22-23. Paper 171. 2022	2022
47	Abrar, M., and Ali, M. “A review on the hybridization of varying length natural fibers for cement composites”. 6th International Conference on Civil Engineering for Sustainable Development ICCESD 2022, Khuna, Bangladesh. February 10-12. Paper 01138. 2022	2022
48	Das, A. J., and Ali, M. “An overview on different reinforcing bars from manufacturing to strengthening element”. 6th International Conference on Civil Engineering for Sustainable Development ICCESD 2022, Khuna, Bangladesh. February 10-12. Paper 01137. 2022	2022
49	Khalid, S., Saad, M.S., Ali, W., Sudheer, M., and Ali, M. “Behaviour of concrete at high temperature: A review”. 6th International Conference on Civil Engineering for Sustainable Development ICCESD 2022, Khuna, Bangladesh. February 10-12. Paper 01133. 2022	2022
50	Khan, S.S. and Ali, M., Compressive behaviour of concrete having PVC and glass wastes. Global Virtual Summit on Materials Science & Engineering, London, United Kingdom, October 22-23. Paper Ref. P0006, 2022	2022
51	Das, A. J., and Ali, M. “An Overview on Different Corrugated Sheets from Manufacturing to Housing Element”. International Conference on Advances in Engineering, Architecture, Science and Technology (ICA-EAST 2021), Erzurum Turkey. December 15-17. Paper 147. 2021	2021
52	Abideen, Z. U., and Ali, M. “Potential of Used Diesel Engine oil as An Admixture in Cement composites: A detailed review”. International Conference on Advances in Engineering, Architecture, Science and Technology (ICA-EAST 2021), Erzurum Turkey. December 15-17. Paper 144. 2021	2021
53	Hassan, M. S., Khalid, S., Ali, W., Sudheer, M., and Ali, M. “Review On Potential Of Waste Materials As Fire-Resistant Materials”. International Conference on Advances in Engineering, Architecture, Science and Technology (ICA-EAST 2021), Erzurum Turkey. December 15-17. Paper 141. 2021	2021
54	M. Abrar and M. Ali, “Workability of concrete having hybrid natural fibers of different lengths for easy pouring,” in International conference on advances in Engineering, Architecture, Science and Technology, Turkey, 2021.	2021
55	Das, A. J, and Ali, M. “Energy absorption capabilities of recycled-plastic reinforcing bars for earthquake resistant housing construction”. Annual Australian Earthquake Engineering Society Conference, Australia, November 25-26. Paper 34. 2021	2021
56	Ahmed, S, and Ali, M. “Influence of jute fibers in dissipating energy caused by impact loading on reinforced concrete”. International Symposium on blast and impact resistant materials for civil engineering (SBIRMCE), Malaysia, November 16. Paper BIRM21111. 2021	2021
57	Abrar, M., and Ali, M. “Effect of Banana fibers on the enhancement of compressive toughness of Reinforced Concrete Columns –A Review”. International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA. July 29-30. Paper 113. 2021	2021
58	S. Ullah and M. Ali, “Sustainability aspects in seismic performance of confined masonry structures: A review,” 2021.	2021
59	S. Ullah and M. Ali, “Treatment of natural fibers for improving cement composites behavior-an overview,” Seed, vol. 18, no. 20.6, pp. 2–3, 2021.	2021
60	Hassan, B., and Ali, M. “Workability of Concrete Having Used Petrol Engine Oil and Banana Fibers”. International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA. July 29-30. Paper 123. 2021	2021
61	Hassan, B., and Ali, M. “A Review on Durability Methods for Natural Fibers in Polymer Matrices from Sustainability Aspects”. International Conference on Innovations in Energy Engineering & Cleaner Production Silicon Valley, San Francisco, California – USA. July 29-30. Paper 155. 2021	2021
62	A. J. Das and M. Ali, “Recycling of waste plastic with least effect to environment: A review,” 2021.	2021
63	A. Rehman and M. Ali, “Effectiveness of hybrid fibers in cementitious composites towards sustainability: A review,” 2021.	2021
64	A. Ejaz and M. Ali, “Limitations of autodesk robot structural analysis professional for structural design output: A review of frame building.” pp. 93-96, 2021.	2021
65	Ahmad, W., Gul, S., and Ali, M. “Review on Flaws In Concrete and its Structural Performance”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-23. pp. 231-233. 2021	2021
66	Dodhy, M.H., Farooqi, M.U., and Ali, M. “Utilization of Natural Fibers in Construction Industry: A Review”. International Congress on Phenomenological Aspects of Civil Engineering, Ataturk University, Turkey. June 20-23. pp. 466-468. 2021	2021
67	Ullah, I., Farooqi, M.U., and Ali, M. “Modern Classification of Link Road. An Overview”. International Conference on Computational Civil Engineering Empower The Digital Transition In The Construction World, Iasi Romania. May 27-29. Paper 45. 2021	2021
68	Shehryar, A., and Ali, M. “Improvement In Impact Resistance Of GFRP Reinforced Concrete Wall Panels Using Jute Fibres”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 18. 2020	2020
69	Sudheer, M., and Ali, M. “Behavior of interlocking plastic-block wall with opening under harmonic loading using locally developed shake table”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 58. 2020	2020
70	Afzal, S., and Ali, M. “Out-of-plane behavior of mortar-free interlocking solid-walls under seismic loading – A review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 73. 2020	2020
71	Shah, M., Farooqi, MU., and Ali, M. “Use of admixtures in improving bonded asphalt overlay on concrete pavements-A critical review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 74. 2020	2020
72	Ali, SZ., Farooqi, MU., and Ali, M. “Assessment of asphalt overlay performance over concrete bridge deck”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 77. 2020	2020
73	Abbas, A., Ejaz, A., and Ali, M. “Utilization of Natural Fibers in Concrete for Improving Behavior of Non-Structural Elements – A Review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 78. 2020	2020
74	Rahman, MU., Farooqi, MU., and Ali, M. “Use of BIM Tools In Highway Transportation System In Developed Countries – A Review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 79. 2020	2020
75	Din, HU., and Ali, M. “Energy Dissipation in 3D Structure With Multiple Uplifts at Column Bases”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 80. 2020	2020
76	Waris, I., and Ali, M. “Finite Element Modelling Of Uplift In Structures – A Review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 81. 2020	2020
77	Raza, W., Khalid, F., and Ali, M. “A review on observed flaws in bricks and their possible sustainable remedies for local construction”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 82. 2020	2020
78	Kiani, MBT., and Ali, M. “Seismic Analysis and Design of Elevated Water Tower – A Review”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 84. 2020	2020
79	Bashir, A., Gul, S., and Ali, M. “A critical review on limitations of non-linear analysis of multi-storey structures”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 85. 2020	2020
80	Tariq, MA., Farooqi, MU., and Ali, M. “A Review On Different Influential Factors And Techniques For Evaluating Bonding Between Asphalt Overlay And Concrete Pavement”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 87. 2020	2020
81	Rahman, AU., and Ali, M. “Influence of Jute Fibre and GFRP Rebars in Compressive and Dynamic Behavior of Prototype Thin Shear Concrete Walls”. 11th International Civil Engineering Conference (ICEC2020) Integrating Innovation and Sustainability in Civil Engineering”, NED-UET / IEP Karachi, Pakistan. March 13-14. Paper 87. 2020	2020
82	Sudheer, M., and Ali, M. “Behaviour of interlocking block structures under dynamic loading: A review” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 231. 2019	2019
83	Ejaz, A., and Ali, M. “Development of empirical relation for moment capacity of a concrete Prototype Bridge Deck slab reinforced with GFRP Rebars and jute Fibres” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 218. 2019	2019
84	Rehman, AU., and Ali, M. “Behavior of Thin Shear Concrete Walls During Earthquakes in Last Decade” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 217. 2019	2019
85	Ullah, F., and Ali, M. “A review on replacement of steel with GFRP rebars in fiber reinforced concrete eccentric rectangular columns” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 216. 2019	2019
86	Ahmed, S., and Ali, M. “Impact resistance investigation of fibre reinforced concrete having GFRP rebars in last two decades” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 214. 2019	2019
87	Farooq, J., and Ali, M. “Model updating for a simple structure against impact loading” 2nd International Conference on “Sustainable Development in Civil Engineering (ICSDC-2019)”, Mehran UET Jamshoro, Pakistan. December 05-07. Paper 165. 2019	2019
88	Ahmed, T., Farooqi, MU., and Ali, M. “Compressive behaviour of rice straw reinforced concrete for rigid pavements” 8th Global Conference on Materials Science and Engineering (CMSE), Sanya, China. November 12-15. Paper CMSE3781. 2019	2019
89	Khan, M., Cao, M., and Ali, M. “Strength Properties of Multi-Scale Hybrid Fiber Reinforced Concrete”. 1st Conference on Sustainability in Civil Engineering (CSCE). CUST Islamabad Pakistan. August 01. Paper 101. 2019	2019
90	Ajaz, N., Rashid, A. and Ali, M. “Relationship between energy dissipation and column uplift in simple 3D structure during dynamic loading” 9th International Conference On Advances in Civil, Structural and Mechanical Engineering, London, UK. July 20-21. Paper ACSM-19-323. 2019	2019
91	Farooqi, MU., and Ali, M. “Construction practices for first ever wheat straw reinforced concrete pavement for light traffic”. 5th International Conference on Sustainable Construction Materials and Technology, Kingston University, London, UK. July 14-17. Paper ID SCMT5169. 2019	2019
92	Khan, M., Cao, M., and Ali, M. “Influence of CaCO3 whiskers, steel fibers and basalt fibers hybridization on flexural toughness of concrete”. 5th International Conference on Sustainable Construction Materials and Technology, Kingston University, London, UK. July 14-17. Paper IDSCMT5118. 2019.	2019
93	Qamar, F., Thomson, T., and Ali, M. “Effect of natural fibrous plaster on lateral resistance of mortarless interlocking wall”. 5th International Conference on Sustainable Construction Materials and Technology, Kingston University, London, UK. July 14-17. Paper IDSCMT5149. 2019.	2019
94	Affan M., and Ali, M. “Compressive Behavior of Jute Fiber Reinforced Concrete under Freeze-Thaw Cycles”, International Civil Engineering and Architecture Conference, Trabzon, Turkey. April 17-20. Paper CE-SE-088, 2019.	2019
95	Zahid M., and Ali, M. ” Behavior of jute fiber reinforced stabilized earth-brick to improve load carrying capacity”, International Civil Engineering and Architecture Conference, Trabzon, Turkey. April 17-20. Paper CE-G-060, 2019.	2019
96	Safdar M.M.B., and Ali, M. “Robot structural analysis for practising designers in developing countries – challenges and their solution”, International Civil Engineering and Architecture Conference, Trabzon, Turkey. April 17-20. Paper CE-SE-160, 2019	2019
97	Khan, F., and Ali, M. “Behavior of interlocking plastic-block structure under harmonic loading using locally developed low-cost shake table”, Annual Australian Earthquake Engineering Society Conference, Perth, Australia. November 16-18. Paper 51, 2018	2018
98	Qamar, F., Qin, S. and Ali, M. “Estimating seismic resistance of fibrous plastering effect on mortar less interlocked masonry walling with finite element modelling”, Annual Australian Earthquake Engineering Society Conference, Perth, Australia. November 16-18. Paper 22, 2018	2018
99	Ali, M. “Awareness of preparedness in institutional buildings of developing countries for a disaster”, Annual Australian Earthquake Engineering Society Conference, Perth, Australia. November 16-18. Paper 14, 2018	2018
100	Hussain, T., and Ali, M. “Utilization of FRC tension zone for reinforcement reduction in slabs- a simplified approach”, Annual Canadian Society for Civil Engineering Technical Conference, Fredericton, Canada. June 13-16. Paper MA22, 2018	2018
101	Waqas M., and Ali, M. “An Efficient Approach to Incorporate Soil-Structure Interaction Effects for Practicing Engineers”, ASCE IACGE Conference on “Geotechnical and Seismic Research and Practices for Sustainability”, Chongqing, China. October 20-21. Vol. 304, pp 639-651, 2018	2018
102	Khan, M., Cao, M., and Ali, M. “Hybrid Fiber Reinforced Concrete for the Application of Bridge Deck”, 3rd FRC International Workshop “Fibre Reinforced Concrete: from Design to Structural Applications” – ACI-fib-RILEM Joint Workshop, Desenzano, Lake Garda, Italy. June 28-30. Paper 053, 2018	2018
103	Khan, M., Cao, M., and Ali, M. “Experimental and empirical study of basalt fiber reinforced concrete”, Annual Canadian Society for Civil Engineering Technical Conference, Fredericton, Canada. June 13-16. Paper MA39, 2018	2018
104	Qamar, F., Thomson, T., and Ali, M. “Effect of sisal fibrous mortar in improving out of-plane resistance and damping ratio of masonry column”, Annual Canadian Society for Civil Engg Technical Conference, Fredericton, Canada. June 13-16. Paper ST119, 2018	2018
105	Sudheer, M., Farooqi, M.U., and Ali, M. “Case study: Flaws of concrete roads in Pakistan – possible reasons and remedial measures”, Annual Canadian Society for Civil Engineering Technical Conference, Fredericton, Canada. June 13-16. Paper TR47, 2018	2018
106	Batool, K., and Ali, M,, “Construction practices of masonry houses in private societies of developing countries from seismic resistance aspects”, Annual New Zealand Society for Earthquake Engg Technical Conf., Auckland, New Zealand. April 13-15., Paper P2.01, 2018	2018
107	Ismail, S., Tariq, S., Gul, S., and Ali, M,, “Seismic Construction Practices of Commercial RCC Buildings via Visual Inspection in Developing Countries”, Annual New Zealand Society for Earthquake Engg Technical Conf., Auckland, New Zealand. April 13-15., Paper P1.35, 2018	2018
108	Qamar, F., Thomas, T. and Ali. M,, “Effect of rice straw reinforced plaster in improving out-of-plane resistance of mortar-free interlocking column”, Annual New Zealand Society for Earthquake Engg Technical Conf., Auckland, New Zealand. April 13-15., Paper P1.12, 2018	2018
109	Khan, M., Cao, M., and Ali, M., “Effect of CaCO3 Whisker, Steel Fiber and Basalt Fiber Content on Compressive Energy Absorption of Concrete”, Annual New Zealand Society for Earthquake Engg Technical Conf., Auckland, New Zealand. April 13-15., Paper P1.10, 2018	2018
110	Khan, M., Khan, U., A., and Ali, M., “Flexural properties of high strength coconut fiber reinforced concrete for earthquake resistant structures”, Annual New Zealand Society for Earthquake Engg Technical Conf., Auckland, New Zealand. April 13-15., Paper P1.11, 2018	2018
111	Tariq, S., Ismail, S., and Ali, M., (2017). Seismic Risk Assessment of Residential RCC Buildings with Street Survey in Urban Areas of Developing Countries. Annual Australian Earthquake Engineering Society Conference, Canberra, November 24-26. Paper 423	2017
112	Batool, K., Ayaz, G., and Ali, M., (2017). Seismic Vulnerability Assessment of Brick Masonry Houses with Street Survey in Developing Countries. Annual Australian Earthquake Engineering Society Conference, Canberra, November 24-26. Paper 425	2017
113	Hayat, A. Khan, H., Haq, R. U. and Ali, M., (2017). Use of Pine-Needle Reinforced Composites in Kashmir, Pakistan – A Critical Review. Annual Australian Earthquake Engineering Society Conference, Canberra, November 24-26. Paper 450	2017
114	Anwar, G., Khan, S. A., and Ali, M., (2017). Earthquake Risk Assessment using PSHA in ArcGIS for developing countries – An easy and quick approach. Annual Australian Earthquake Engineering Society Conference, Canberra, November 24-26. Paper 451.	2017
115	Farooqi, M. U. and Ali, M., (2017). Effect of fibre content on compressive strength of wheat straw reinforced concrete for pavement applications. 2nd International Conference on Frontiers of Composite Materials, Melbourne Australia, November 15-17. Paper 136	2017
116	Liaqat, Z., Khan, M. and Ali, M., (2017). Increasing flexural toughness with natural fibers and silica fume in concrete for structural applications. 5th International Conf. on Infrastructure Engineering in Developing Countries (IEDC-2017) Karachi Pakistan, July 14-15. Paper 32	2017
117	Rehman, A., Khan, M., and Ali, M., (2017). Utilization of high strength coconut fiber reinforced concrete in bridge pier. 5th International Conference on Infrastructure Engineering in Developing Countries (IEDC-2017) Karachi Pakistan, July 14-15. Paper 31.	2017
118	Farooqi, M. U. and Ali, M., (2017). Short-term durability of wheat straw reinforced concrete for pavement applications. 5th International Conference on Infrastructure Engineering in Developing Countries (IEDC-2017) Karachi Pakistan, July 14-15. Paper 30. Paper got selected for UNIVERSITY TRAVEL GRANT	2017
119	Ali, M. (2017). Evacuation of institutional buildings during a disaster in developing countries: from planning to implementation. NZSEE Conf., Wellington, New Zealand. April 27-29. Paper 0220.	2017
120	Khan, M. and Ali, M. (2017). Earthquake-resistant brick masonry housing for developing countries: An easy approach. NZSEE Conf., Wellington, New Zealand. April 27-29. Paper 0054	2017
121	Farooqi, M. U. and Ali, M. (2016). Flexural behaviour of wheat straw reinforced concrete for pavement applications. 36th Cement and Concrete Science Conference, Cardiff, UK. September 5-6. Paper 44	2016
122	Farooqi, M. U. and Ali, M. (2016). Compressive behavior of wheat straw reinforced concrete for pavement applications. 4th International Conference on Sustainable Construction Materials and Technology, Las Vegas, USA. August 7-11. Paper 231. Paper got selected for HEC TRAVEL GRANT	2016
123	Ali, M. and Chouw, N. (2013). Influence of post-tensioned ropes on the dynamic response of mortar-free interlocking structures in earthquakes. 10th Int. conf. on Urban EQ Engg, Tokyo Institute of Technology. Japan. Mar 1-2. Paper 04-048. Selected for Tokyo Institute of Technology TRAVEL GRANT	2013
124	Ali, M., R. Briet, S. Bai & N. Chouw (2013). Seismic performance of mortar-free interlocking column. NZSEE Conf., Wellington, New Zealand. April 26-28. Paper 40	2013
125	Ali, M., B. Nolot & N. Chouw (2011). Behaviour of coir fibre and rope reinforced concrete members with debonding length. 9th PCEE, University of Auckland, New Zealand. April 14-16. Paper 131	2011
126	Ali, M., H. Sou, A. Liu and N. Chouw (2010). Effect of fibre content on dynamic properties of coir fibre reinforced concrete beam. NZSEE Conf., Wellington, New Zealand. March 26-28. Paper 43	2010
127	K. Twigden, X. Li, Ali, M., C. Oyarzo-Vera & N. Chouw (2010). Effect of harmonic sequence on structures. NZSEE Conf. 2010. Paper 37	2010
128	Ali, M., & N. Chouw (2010). Consequence of crack development for dynamic behavior of coir fibre reinforced concrete beams. 9th US National and 10th Canadian Conf. on EQ Engg., Toronto, Canada. July 25-29. Paper 341	2010
129	Ali, M., 2010. Coconut fibre – A Versatile Material and its Applications in Engineering. 2nd International conference on “Sustainable Construction Materials and Technologies(SCMT)”, June 28-30, Ancona, Italy. Pp.1441-1454	2010
130	Ali, M., & N. Chouw (2009). Dynamic testing of coir fibre reinforced concrete beam. 8thInt. conf. on SILOS , Uni. of Adelaide, Australia. Dec. 2-4. 137-144	2009
131	Ali, M., & N. Chouw (2009). Coir fibre& rope reinforced concrete beam under dynamic loading. AEES Conf., New Castle, Australia. Dec. 11-13. Paper 4	2009
132	Ali, M., 2009. Natural fibres as construction materials. 11th Int. Conf. on Non-conventional Materials & Technologies (NOCMAT), September 6-9, Bath, UK. Paper 34 on CD.	2009
133	Ahmad, S. and Ali, M. 2006. Comparative study of analysis and design of high-rise building in non-seismic and different seismic zones. 2nd Asian Concrete Federation (ACF) International Conference, November 20-21, Bali, Indonesia. Pp 204-215	2006
134	Ali, M., 2009. Properties of natural fibre reinforced concrete. International conference on “Natural fibres – Materials low Carbon Future”, organized by the Institute of Materials, Minerals and Mining (IOM 3), Dec. 14-16, London, UK. Paper Ref. 04 (Presentation only)	2009
135	Ali, M., Li, X. and Chouw, N. 2010. Coir fibre and rope reinforced concrete columns under harmonic loading. Annual New Zealand Society for Earthquake Engineering Technical Conference, , March 26-28, Wellington, New Zealand. Paper reference 43 (Abstract only).	2010